C3560 that supports crypto for remote acess
I have a question WS-C3560-8PC-S that supports ssh remotely to do?
supports the WS-C3560-8PC-S crypto functions?
Similar Messages
-
Does Mac OS support wsman for remoting???
It is my understanding that microsoft has adopted wsman as an industry standard (not microsoft standard) to remote into systems for configuration. Has apple adopted this standard WSMAN for remoting. Can one remote in with WSman if so how? Thank you
MacBook, Mac OS X (10.7.2), launching an app via terminal.Shane,
Many users have reported running FM under Bootcamp, Parallels, VMware Fusion, etc.. Reports suggest that FM8 runs faster than FM9 in these configurations.
See "FrameMaker on Intel Macintosh": http://www.daube.ch/docu/fmaker46.html for more info. -
How do I remove Avast from Safari?
"Avast" is perhaps the worst of the whole wretched lot of commercial "security" products for the Mac. Not only does it fail to protect you from any real danger, it throws false warnings, destabilizes and slows down the computer, and sometimes or always corrupts the network settings and the permissions of files in your home folder. Removing it may not repair all the damage.
Back up all data, then remove "Avast" according to the developer's instructions. Restart.
If you tried to remove Avast by dragging an application to the Trash, you'll have to reinstall it and then follow the instructions linked above. -
Providers that support EIGRP for MPLS
There doesn't seem to be any list of these and BGP and redistribution drive me nuts. I've heard Sprint offers this but there must be others?
Thanks in advance!Hello Mloraditch,
it is more a question of commercial policies rather then a technical limit
I think some provider may charge more for the use of EIGRP as PE-CE.
This is because the PE node has to perform the redistribution of EIGRP in MP BGP for your benefit.
Hope to help
Giuseppe -
Error message that says waiting for remote debugger, can anyone help?
Help please, it does this every 5 minutes, the hard drive was wiped clean, and snow leopard was reinstalled, after updating everything and reinstalling i life it started doing this
lyndag,
This article may help out with the issue you are having. Give the steps a shot:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCate gory&cc=us&dlc=en&lang=en&lc=en&product=1146331#N6576
If the issue persists: Can you provide screenshots of the error? Is this wireless/usb/ethernet install?
Best of Luck!
I work with HP but my posts and opinions are my own. -
Hi,
Is there a minimum package of classes (.jar, .zip) that are required for
remote client application to call EJBs in WL 5.1 container ?
My remote application works fine if I include WL_HOME/classes in its
classpath. The problem is that WL_HOME/classes directory is huge. I am
looking for some lightweight package of classes that would contain only
client side implementation of WL's RMI, JNDI and EJB - just enough to
call EJBs from remote client application.
I couldn't find such .jar in the WL 5.1 installation.
Can anybody help ?
thanks,
RafalThese is no such jar provided by BEA. You can try to create one using
verbose2zip: http://www.weblogic.com/docs51/techstart/utils.html#verbosetozip
If network speed allows for it, you can network classload from WebLogic :
http://dima.dhs.org/misc/ThinClient.jsp or
http://dima.dhs.org/misc/ThinClient2.jsp
(this will download few hundred k, so it is not acceptable for a client
connected via 28.8 modem).
Rafal Mantiuk <[email protected]> wrote:
Hi,
Is there a minimum package of classes (.jar, .zip) that are required for
remote client application to call EJBs in WL 5.1 container ?
My remote application works fine if I include WL_HOME/classes in its
classpath. The problem is that WL_HOME/classes directory is huge. I am
looking for some lightweight package of classes that would contain only
client side implementation of WL's RMI, JNDI and EJB - just enough to
call EJBs from remote client application.
I couldn't find such .jar in the WL 5.1 installation.
Can anybody help ?
thanks,
Rafal--
Dimitri -
Hi guys,
I am using L3 4506 switch with the IOS Version 12.2(18)EW3. I want to upgrade the IOS which supports SSH. Can any one suggest the latest IOS version that supports SSH for 4506 switch.
Thanks
RajeshThanks Prame...
The Supervisor Engine that we have is Supervisor IV.
For your better understanding i have attached the output below.
Switch#sh ver
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(18)EW3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Mon 07-Feb-05 19:21 by hqluong
Image text-base: 0x00000000, data-base: 0x010BFA78
ROM: 12.2(20r)EW1
Dagobah Revision 95, Swamp Revision 29
swsyd0501 uptime is 2 hours, 47 minutes
System returned to ROM by reload
System image file is "bootflash:"
cisco WS-C4506 (MPC8245) processor (revision 7) with 524288K bytes of memory.
Processor board ID FOX094203G6
Last reset from Reload
8 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
56 Gigabit Ethernet/IEEE 802.3 interface(s)
403K bytes of non-volatile configuration memory.
Configuration register is 0x2101
I think this will help to suggest me for a better IOS version which support SSH.
Thanks
Rajesh -
Remote support options for iPad?
We're looking at the iPad as a possible solution for a specific business case. However, I'll need some way to provide remote support to the iPad users. I've looked for VNC type apps but everything I've found just enables the iPad to be a client that connects to and remotely controls another system.
Is there a VNC server-like app for iPad that would let me provide remote support TO the device?Since the OS on the iPad does not allow multitasking there is only one app running at a time. This would not allow a VNC server app to run.
Even with the preview of multitasking in iPhone OS 4 a VNC server would require access out of its sandboxed environment which it would not be allowed to have.
Another issue is that it is a multi-touch device that does not use a mouse cursor. I am not sure VNC can handle this.
Essentially what you are asking would be similar to someone controlling an iPhone remotely, since the iPad is much closer to an iPhone than it is to a computer.
A workaround may be to use video conferencing on a computer so that you can see the screen of the iPad, guiding the user through the steps required. -
Know more detail about the Remote Support Platform for SAP Business One ?
SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here : Remote Support Platform for SAP Business OneSAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here : Remote Support Platform for SAP Business One -
Dialling plan that supports star services for the UK
Wendy has sent me a dialling play that supporrts *21, but I need a UK dialling plan that supports all fo the UK star services as below - Can anyone help please?
SET ANONYMOUS CALL REJECTION *227#
CHECK ACR *#227#
CANCEL ACR #227#
Call Divert on all calls
SET CALL DIVERSION * 21 * [phone number] #
CHECK CALL DIVERSION * # 21 #
CANCEL CALL DIVERSION # 21 #
Call Divert on no reply
SET DIVERSION ON NO REPLY * 61 * [phone number] #
CHECK DIVERSION ON NO REPLY * # 61 #
CANCEL DIVERSION ON NO REPLY # 61 #
Divert on no reply: *61*number*wait# == (Extra System Y facility only - does not work on 410567 as of Dec 2011)
Wait is two digit time in seconds (05 to 60) before redirection takes place.
Call Divert on busy
SET DIVERSION ON BUSY * 67 * [phone number] #
CHECK DIVERSION ON BUSY * # 67 #
CANCEL DIVERSION ON BUSY # 67 #
Call Divert on no reply or busy
SET DIVERSION ON NO REPLY & BUSY * 66 * [phone number] #
CHECK DIVERSION ON NO REPLY & BUSY * # 66 #
CANCEL DIVERSION ON NO REPLY & BUSY # 66 #
Call Minder (Voicemail)
CALL MINDER SERVICE 1571
Call Waiting
SET CALL WAITING * 43 #
CHECK CALL WAITING * # 43 #
CANCEL CALL WAITING # 43 #
Caller Display
SET CALLER DISPLAY DATA ON *234#
CHECK CALLER DISPLAY DATA *#234#
CANCEL CALLER DISPLAY DATA #234#
Caller ID
WITHHOLD CALLER ID 141 [phone number]
RELEASE CALLER ID 1470 [phone number]
CALLER RETURN 1471
ERASES LAST NUMBER GIVEN ON CALLER RETURN 1475
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Charge Advice
SET CHARGE ADVICE (BEFORE A CALL) * 40 * [phone number] #
SET CHARGE ADVICE (FOR ALL CALLS) * 411 #
CHECK CHARGE ADVICE *# 411 #
CANCEL CHARGE ADVICE # 411 #
Choose to Refuse
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
I
ncoming Call Barring
SET INCOMING CALL BARRING * 261 #
CHECK INCOMING CALL BARRING * # 261 #
CANCEL INCOMING CALL BARRING # 261 #
Miscellaneous
CHECK WHICH SERVICES ARE ACTIVE * # 001 #
BT LINE TEST & RINGBACK FACILITY 17070
REDIAL LAST NUMBER DIALLED **0
Outgoing Call Barring
SET OUTGOING CALL BARRING * 34 option #
CHECK OUTGOING CALL BARRING * # 34 #
CANCEL OUTGOING CALL BARRING # 34 option * [PIN] #
Reminder Call Service
SET REMINDER CALL (using 24 hour clock with 4 digits) * 55 * [time] #
CHECK REMINDER CALL * # 55 #
CANCEL REMINDER CALL # 55 #
SET REGULAR REMINDER CALL * 56 * [time] * [day option] #
CHECK ALL REGULAR REMINDER CALL * # 56 #
CANCEL A REGULAR REMINDER CALL # 56 * [time] * [day option] #
CANCEL ALL REGULAR REMINDER CALLS # 56 #
Day options numbers: Monday - 1, Tuesday - 2, Wednesday - 3, Thursday - 4, Friday - 5, Saturday - 6, Sunday - 7, Monday - Friday: 8 Every Day - 9.
Remote (Smart) Call Divert on all calls
SET REMOTE CALL DIVERT ON ALL CALLS * 44 * [PIN] * [your full phone number] * [number to divert to] #
CHECK REMOTE CALL DIVERT ON ALL CALLS # 44 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON ALL CALLS * # 44 * [PIN] * [your full phone number] #
Remote (Smart) Call Divert on no reply
SET REMOTE CALL DIVERT ON NO REPLY * 64 * [PIN] * [your full phone number] * [phone number to divert to] #
CHECK REMOTE CALL DIVERT ON NO REPLY # 64 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON NO REPLY * # 64 * [PIN] * [your full phone number] #
Remote (Smart) Call Divert on busy
SET REMOTE CALL DIVERT ON BUSY * 65 * [PIN] * [your full phone number] * [phone number to divert to] #
CHECK REMOTE CALL DIVERT ON BUSY # 65 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON BUSY * # 65 * [PIN] * [your full phone number] #
Ringback
SET RINGBACK [phone number] 5
CHECK RINGBACK *#37#
CANCEL RINGBACK #37#
SET RING BACK INHIBIT *02*37#
CHECK RING BACK INHIBIT *#02*37#
CANCEL RING BACK INHIBIT #02*37#
CALL ROUTING VIA BT
(when using another provider) 1280Hi Jon,
After thorough discusiion with engineering team and marketing team, we have decided to support most star services you requested except the following items. I have created a PMF for it. Please send me an email at [email protected]. I will reply you with the PMF.
Call Minder (Voicemail)
CALL MINDER SERVICE 1571
Call Waiting
SET CALL WAITING * 43 #
CHECK CALL WAITING * # 43 #
CANCEL CALL WAITING # 43 #
Caller ID
WITHHOLD CALLER ID 141 [phone number]
RELEASE CALLER ID 1470 [phone number]
CALLER RETURN 1471
ERASES LAST NUMBER GIVEN ON CALLER RETURN 1475
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Choose to Refuse
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Incoming Call Barring
SET INCOMING CALL BARRING * 261 #
CHECK INCOMING CALL BARRING * # 261 #
CANCEL INCOMING CALL BARRING # 261 #
REDIAL LAST NUMBER DIALLED **0
Outgoing Call Barring
SET OUTGOING CALL BARRING * 34 option #
CHECK OUTGOING CALL BARRING * # 34 #
CANCEL OUTGOING CALL BARRING # 34 option * [PIN] #
Reminder Call Service
SET REMINDER CALL (using 24 hour clock with 4 digits) * 55 * [time] #
CHECK REMINDER CALL * # 55 #
CANCEL REMINDER CALL # 55 #
SET REGULAR REMINDER CALL * 56 * [time] * [day option] #
CHECK ALL REGULAR REMINDER CALL * # 56 #
CANCEL A REGULAR REMINDER CALL # 56 * [time] * [day option] #
CANCEL ALL REGULAR REMINDER CALLS # 56 #
Day options numbers: Monday - 1, Tuesday - 2, Wednesday - 3, Thursday - 4, Friday - 5, Saturday - 6, Sunday - 7, Monday - Friday: 8 Every Day - 9.
Ringback
SET RINGBACK [phone number] 5
CHECK RINGBACK *#37#
CANCEL RINGBACK #37#
SET RING BACK INHIBIT *02*37#
CHECK RING BACK INHIBIT *#02*37#
CANCEL RING BACK INHIBIT #02*37#
Best regards,
Wendy -
IS COMPUTER FIX, INC A 3rd party Independent Tech Support Provider FOR APPLE? THEY CHARGED AS 339.00 DOLLARS TO REMOTELY REPAIR OUR MACBOOK
If you paid by credit card, contact the bank handling this payment
and ask that it be stopped since the provider did not actually do
anything to the computer and you are suspicious of their actions.
If the billing was added to a phone account, contact the vendor of
that service to dispute the charges against you; and cite concerns
of security, identify theft, privacy and of being scammed.
You may have to fill out forms, and see if the credit card bank will
refund or not; usually they mail them to your billing address, after
you call the bank customer service. Some are better at than others.
This could take some months to resolve, if you paid that way.
They may also have installed (or had you remove security) while
inside your Mac and its system software, remotely. If they were
able to 'scan' your Mac remotely, they may have harvested any
personal or financial information, including passwords saved to
online accounts that may have been in browsers or keychain.
On another track, complete repaired Macs of an older vintage
are not very expensive; even ones from companies who repair
them or those who have stock of repaired units...
While checking for a friend, online I found a few portables that
had been repaired and for sale by a company whose business
is to repair almost all portable Apple computers, in-house.
You can buy an early model guaranteed MacBook from reputable
repair companies with limited warranty for under $400. and that
includes a bill-of-health with an option to buy a longer warranty
for a little bit more. Or just mail in your computer in a flat-rate
postal carton with padding, to one of the well-reputed repairers
directly. They perform a physical/software hands-on diagnostic
& repair service, tell you before they fix anything what it will cost,
what the price variables are when they do hands-on testing; as
that is a real repair. An example: wegenermedia.com online.
The Apple support site has links to the better known AASP
authorized Apple service providers, and you could look up
the ones nearest your City & Country in the Locate section.
Blue links below require additional info once in their Site to
access the Authorized Apple Service Providers who have
an actual physical presence, where they offer services..
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
Apple - Find Locations - Country Selector:
https://locate.apple.com/country
Contact Apple Support - Apple Support:
http://www.apple.com/support/contact/
Some independent providers may be in a situation to do more or
even less, than an Authorized service provider. Some may just
repair computers -- and not officially be affiliated with Apple...
Best to do the necessary research before committing to repair.
In any event...
Good luck & happy computing! -
Rejecting IPSec tunnel: no matching crypto map entry for remote proxy
Hi!
I have already search for this but didn't get an exact answer I'm looking for so I try asking it again (if there is the same question).
I'm in process of migrating some VPN tunnels with from a Cisco router to an ASA, everything will keep the same but just the peering IP address. However, some of the tunnel was being torn down since it request for a proxy doesn't match the one configured on our side. And the remote peer said there is no such issue on the previous platform, but now they need to reset the tunnel from time to time.
Apr 18 2013 07:29:10 asa002 : %ASA-3-713061: Group = 192.168.1.226, IP = 192.168.1.226, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 192.168.1.226/255.255.255.255/0/0 local proxy 10.10.9.81/255.255.255.255/0/0 on interface outside
Apr 18 2013 07:29:10 asa002 : %ASA-3-713902: Group = 192.168.1.226, IP = 192.168.1.226, QM FSM error (P2 struct &0x745e9150, mess id 0x8d7ad777)!
Apr 18 2013 07:29:10 asa002 : %ASA-3-713902: Group = 192.168.1.226, IP = 192.168.1.226, Removing peer from correlator table failed, no match!
The remote peer said they did not change the proxy id on their side so it is possibly the old platform will just not setting up the SA without torn down the tunnel while the ASA on the new platform will torn down if there is any mismatch.
Anyway I have requested the remote side to remove those unmatched entried to avoid the tunnel being torn down, but if there any configuration that is related to this issue? i.e. Just bring up the SA with matched addresses and ignore others, instead of torn down the tunnel.
Thanks!!
//CodyAre you trying to send traffic destined towards the internet from 172.16.0.0/20 via this ASA as well? why? are you inspecting those traffic before being sent out to the internet?
If so, this end also needs to be configured with "any" as well --> crypto ACL needs to mirror image.
access-list outside_1_cryptomap extended permit ip any 172.16.0.0 255.255.240.0
Then you also need NAT on the outside interface, otherwise, traffic from 172.16.0.0/20 is not PATed to a public IP, and won't be able to reach the internet:
nat (outside) 1 172.16.0.0 255.255.240.0 -
I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?
Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education. -
Just did the iTunes update that iTunes said was available, now iTunes won't open. I just keep getting a Runtime Error message.
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
Is anyone else having this problem?
I tried to re-install and got the following message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
Does this mean I have now lost everything?I just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck! -
Looking for a client/server that supports multiple protocol and delivery
Hi all, I don't know if this the right place to ask my question,here it goes.
I am looking to develop a client-server that supports multiple protocols such as HTTP, HTTPS etc. I am looking for a framework( i don't know if that is correct or I need some kind of web-service (soap etc)) that would manage connection, security etc. I would like to like to devote most of my time in developing business objects with multiple delivery mechanism such as sending serilized java objects, xml message or soap message, or in some case JMS message as well. So I need a client server that can come in via TCP/IP or HTTP or anyother industry standard protocol and I should be able to service him with pub/sub model and also request/response model as well.
I don't know if I had explained what I need, I would like to know what technologies I should be evaluating and which direction I should be heading... Also the server I'm developing should be free of Java constraints if needed...
Also this service is not webbased service as now but if need arises I should have a flexibilty to make them web enabled in future. Also I would like to work with open source webservers or appservers if I needInxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
"i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt which will toggle the different border styles.
Examples:
bindsym Mod1+t bn
bindsym Mod1+y bp
bindsym Mod1+u bb
or put in your config file
new_window bb
from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now )
Maybe you are looking for
-
I do not want to move whole iphoto library to an external hard drive as this will be a bit of a pain. I just want to moves older photos out of my iphoto library, and save them on an external hard drive to save for the future. I have heard that if you
-
Why commit_discontinued in Sqlloader is not working?
Hi all, I'm migrating a solution from Ms Sql Server to Oracle. I have a few programs that uses "BULK INSERT" command. But to my knowledge, oracle doesn't have BULK INSERT and i've been recommended Sql Loader. I've actually successful tested the Sql L
-
Unable to open business partner (Organisation)...
Hi, I have created organisational structure for interaction center. every organisational unit was created autoamatically with their own BP Id ( ex:50000380). when i am trying to open this Bp(organisation) in the "BP" transaction code, Th
-
Nokia E72 Internet Problems.
I'm not all too clued up on phones, but I'm having a problem with the internet on my Nokia e72. When I click internet, I want it to ask me how to connect (WLAN, GPRS etc.), but despite the fact I have set it to do so, it always connects via my home w
-
Can I remove these Toshiba programs from my NB305?
Like many other people, I've been disappointed with the molasses-slow behavior of my NB305 netbook. It's slow in every respect: startup, shutdown, opening programs, running programs, etc. Everything takes much longer than it should. I know that th