C3560G - SNMP MIB Support for QOS Port Trust

I've been digging through Cisco's SNMP Object Navigator without any luck, so I'm turning to the masses to see if someone has an answer.
I'd like to know if there is a supported MIB on the C3560G platform (for any IOS version) that will report the QOS port trust state on a given switchport. Although not necessary for my current needs, it would be nice if there was a way to report the other fields produced by the "show mls qos interface" IOS command.
Thanks!
-- John

Vinod,
Thank you for your response. I was already aware of the CISCO-PORT-QOS-MIB (supported by the 3560G) and CISCO-SWITCH-QOS-MIB (not supported by the 3560G) MIBs. After reviewing the CISCO-CLASS-BASED-QOS-MIB (supported by the 3560G), I see no specific OID that would retrieve the information I require as it mainly pertains to the MQC.
I found two OIDs that appear to represent the data I'm trying to collect. The first one is csqIfTrustState from the CISCO-SWITCH-QOS-MIB. Unfortunately this appears to be supported only on the 6500/7600 devices. The second one is caqIfOperTrustState from the CISCO-CATOS-ACL-QOS-MIB, which is a legacy MIB for the old CATOS software.
Please let me know if I overlooked a specific OID from the MIBs you pointed out or if there are any alternatives you can think of. Thanks!
-- John

Similar Messages

  • Need SNMP MIB files For Cisco SF 300-48 48-Port 10/100 Managed Switch

    Hi All,
    I need SNMP MIB files for Cisco SF 300-48 48-Port 10/100 Managed Switch.
    I have gone through cisco site but not able to get it.
    Can anyone please provide me.I have stuck with this.
    Thanks
    Ram

    Hi Ram, yes the MIB can be used. The switches are essentially the same in many regards (especially on a software level).
    I do not know the OID for bandwidth. If you're looking for a particular OID may be this tool helps you
    http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=dot1dTpPortTable&translate=Translate&submitValue=SUBMIT&submitClicked=true
    -Tom
    Please mark answered for helpful posts

  • Error Compilation MIBs Supported for Cisco UCS C-series software release 1.4(3) and later releases on IBM Director 6.3.2

    Hi,
    I have an IBM director 6.3.2 on a Windows Server 2008R2
    I try to install the MIB for manage Cisco UCS C-460 server.
    I downloaded the mib on the cisco ftp.
    the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
    But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
    Ho can I fix this issue...

    Hi,
    I have an IBM director 6.3.2 on a Windows Server 2008R2
    I try to install the MIB for manage Cisco UCS C-460 server.
    I downloaded the mib on the cisco ftp.
    the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
    But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
    Ho can I fix this issue...

  • SNMP MIB file for Grid Control

    Looking for the MIB file for traps coming out of Grid Control 10gR2. It looks like they're under enterprises.111.15 in the traps I've seen.

    check in AGENT_HOME/network/doc

  • Cisco ISE 1.2 and Cisco ACS 5.4 patch 6 and support for snmp version 3

    does anyone know if cisco ISE version 1.2 patch 8 and Cisco ACS 5.4 patch 6 support snmp version 3?
    ciscoISE/admin(config)# snmp-server ?
      community  Set community string
      contact    Text for mib object sysContact
      host       Specify hosts to receive SNMP notifications
      location   Text for mib object sysLocation
    ciscoISE/admin(config)# snmp-server
    Ciscoacs/admin(config)# snmp-server ?
      community  Set community string
      contact    Text for mib object sysContact
      host       Specify hosts to receive SNMP notifications
      location   Text for mib object sysLocation
    Ciscoacs/admin(config)# snmp-server

    No support SNMP v3 on ISE v1.2 and 1.3 except for profilling
    http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/cli_ref_guide/ise_cli/ise_cli_app_a.html#12768
     http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/cli_ref_guide/b_ise_CLIReferenceGuide/b_ise_CLIReferenceGuide_chapter_0100.html#ID-1364-00000d30

  • Monitor OSPFv3 via SNMP not working - Is OSPFv3 MIB supported?

    I need to be able to query the OSPFv3-MIB via SNMP to track the status of OSPFv3.
    I have setup a 3945 router in a test lab network and I have configured it in an Ipv6 network with OSPFv3.  The router has an active OSPFv3 neighbor and I can use that neighbor to send/receive data (the routing is working fine).  However, when I walk the SNMP MIBs I don't get a response for the OSPFv3-MIB.  According to the Cisco SNMP Object Navigator this MIB should be located at 1.3.6.1.3.102.*.  Below is an example trying to query a particular OID from the OSPFv3 MIB.
    C:\>snmpwalk -v 2c -c public 197.16.18.1 1.3.6.1.3.102.1.5.1.8
    SNMPv2-SMI::experimental.102.1.5.1.8 = No Such Object available on this agent at  this OID
    I can walk other parts of the MIB (For example the OSPFv2 MIB) and get responses, so I know the router has SNMP turned on.
    Looking at the Cisco IOS Mib Locator tool (http://tools.cisco.com/ITDIT/MIBS/MainServlet?IMAGE_NAME=c3900-universalk9-mz.SPA.152-4.M3.bin) for the current software version I am running (c3900-universalk9-mz.SPA.152-4.M3.bin) on a 3945 router it claims that the OSPFv3 MIB is supported in this image.  
    Maybe I need to configure something else?  Maybe my SW doesn't really support this MIB?  Could it be that I have to query the router over Ipv6 to get the OSPFv3-MIB (I have only been trying Ipv4)?

    Hi ,
    As Vinod suggested , you need to configure the "SNMP CONTEXT"
    Configure:
    ==========
    Basic configuration consists of 4 steps:
    Configure mapping between VRF name and SNMP context :
    snmp-server vrf <vrf_1> context <context_1>
    Create community string corresponding to the VRF :
    snmp-server community <vrf_1> RW
    Define context string
    snmp-server context <context_1>
    Configure mapping between context and community:
    snmp-server community-map <vrf_1> context <context_1>
    (optional) Configure snmp server traps for this VRF community
    snmp-server host <IP> traps version 2c <vrf_1>
    For e.g:
    snmp-server vrf miki
    context miki_bgp
    snmp-server community miki RW
    snmp-server context miki_bgp
    snmp-server community-map miki context miki_bgp
    Hope it will help
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ***

  • What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

    Hi All,
    What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
    Client Type
    Port range  and Protocol required for Audio
    Port range and Protocol required for
    Video
    Port range and Protocol required for
    A/Vconferencing
    Windows Desktop   Client
    Windows mobile App
    Iphone
    Ipad
    Andriod phone
    Andriod Tablet
    MAC desktop client
    Please advise. Many Thanks.

    Out of the box, 1024-65535 for all of the client ports.  :) 
    https://technet.microsoft.com/en-us/library/gg398833.aspx
    You'll want to tune your client ports a bit
    https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings.  I'm not sure the mobile clients respect that setting.
    Elan's got the best writeup for Windows clients here:
    http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
    However, the marking of the packets is the tricky part.  Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings.  You have to do it based on ports
    as the traffic could be peer to peer.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Jwsc Error - Only HTTP ports are supported for JAX-WS

    Hi
    I am trying to create a Webservice from wsdl. I have been able to generate java files and jar file with wsdlc ant task.
    However when i try jwsc I get follwoing error
    [jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
    <----- follwowing task for generating java files --->
    <taskdef name="wsdlc" classname="weblogic.wsee.tools.anttasks.WsdlcTask"/>     
    <target name="generate-from-wsdl">
              <wsdlc
                   srcWsdl="wsdl_files/UserPrefWebService.wsdl"
                   destJwsDir="web/web-inf/lib"
                   destImplDir="src"
                   packageName="com.ws.userpref"
                   type="JAXWS"/>
         </target>
    <----- follwowing task for generating class files ----THIS IS FAILING --->
         <taskdef name="jwsc" classname="weblogic.wsee.tools.anttasks.JwscTask" />      
         <target name="build-service">
              <jwsc srcdir="src" destdir="ear">
                   <jws file="com/ws/userpref/UserPrefWebServiceImpl.java"
                        compiledWsdl="web/web-inf/lib/UserPrefWebService_wsdl.jar"
                        type="JAXWS"/>
              </jwsc>
         </target>
    <----- This is the Error --->
    C:\Development\CFCDemoWorkspace\UserPreferencesServer>ant build-service
    Buildfile: build.xml
    build-service:
    [jwsc] JWS: processing module /com/ws/userpref/UserPrefWebServiceImpl
    [jwsc] Parsing source files
    [jwsc] Parsing source files
    [jwsc] 1 JWS files being processed for module /com/ws/userpref/UserPrefWebS
    erviceImpl
    [jwsc] C:\Development\CFCDemoWorkspace\UserPreferencesServer\src\com\ws\use
    rpref\UserPrefWebServiceImpl.java 18:8
    [jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
    [AntUtil.deleteDir] Deleting directory C:\DOCUME~1\138904\LOCALS~1\Temp\_3os716
    BUILD FAILED
    C:\Development\CFCDemoWorkspace\UserPreferencesServer\build.xml:24: weblogic.wse
    e.tools.WsBuildException: JWS Validation failed.
    Total time: 10 seconds
    Does any one has any input on this error?
    Thanks
    Srikant

    Thanks David,
    Below is the wsdl
    <s0:message name="ws_getUserPreference">
    <s0:part element="s1:ws_getUserPreference" name="parameters"/>
    </s0:message>
    <s0:message name="ws_getUserPreferenceResponse">
    <s0:part element="s1:ws_getUserPreferenceResponse" name="parameters"/>
    </s0:message>
    <s0:portType name="UserPrefWebServicePort">
    <s0:operation name="ws_getUserPreference" parameterOrder="parameters">
    <s0:input message="s1:ws_getUserPreference"/>
    <s0:output message="s1:ws_getUserPreferenceResponse"/>
    </s0:operation>
    </s0:portType>
    <s0:binding name="UserPrefWebServiceSoapBinding" type="s1:UserPrefWebServicePort">
    <s2:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <s0:operation name="ws_getUserPreference">
    <s2:operation soapAction="" style="document"/>
    <s0:input>
    <s2:body parts="parameters" use="literal"/>
    </s0:input>
    <s0:output>
    <s2:body parts="parameters" use="literal"/>
    </s0:output>
    </s0:operation>
    </s0:binding>
    <s0:service name="UserPrefWebService">
    <s0:port binding="s1:UserPrefWebServiceSoapBinding" name="UserPrefWebServicePortSoapPort">
    <s2:address location="https://localhost:7001/UserPrefService/UserPref"/>
    </s0:port>
    </s0:service>
    </s0:definitions>
    do i need to add <wlhttptransport/> in jws during the buid?

  • QoS support for UltraSparc T1

    Hi,
    I am just curious about whether there is any hardware or OS (e.g., Solaris 10) QoS support for L2 cache sharing among threads for an UltraSparc T1 machine? Thanks.

    Not explicitly. There are some things done by the OS, like stack slewing, that will, as a side effect, minimize hot bank problems in the level-2 cache.
    Stack slewing:
    http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/os/exec.c

  • SNMP - queues for QoS OID

    I use cbQosCMPrePolicyBitRate (1.3.6.1.4.1.9.9.166.1.15.1.1.7) OID for pooling QoS data over SNMP:
    SNMP walk show (for example) the following:
    SNMPv2-SMI::enterprises.9.9.166.1.15.1.1.7.1061.1063 = Gauge32: 0
    How should I know which queue for QoS is this and what the values 1061.1063 are menaning?
    Are they defining the queue?
    Thanks in advance for any explanation.

    Just to mention that I have already used the Cisco OID translater but did not find this information.

  • Any possibility to get SYSLOG and SNMP support for the E8350?

    Hi,
    It would be so nice to get some more basic functionality "OR more advance ones" to be able to se what is happening on the router, what it is doing and how the status of it is!
    Couldn't Linksys add support for a syslog server or snmp to the E8350 router, would help alot to determine what's going on!
    Or to enable some more / better logging support to a local attached USB stick or similar...
    I remember from one of the old watchguard firewalls i had, it was superb in displaying in and outgoing traffic and what was blocked..
    So a more advanced live traffic view lor ogging option would be greate!
    /J

    I think you are at the point where you are asking for advanced tools but even though its a very pricey router, its still considered a home router. Linksys needs to evaluate their business model on this stuff. Prices more in line with SoHo Business equipment but features of a home router. To me it seems like they have crossed a line. Should reconsider their audience at this price point and open up access to more features but that may need to give out better access to the router instead of the GUI. Need to open up telnet or ssh to a shell that has those features available but would still not grant access to files that could brick the router. It couldn't be that hard. 

  • Vista 64 support for Lenovo Enhanced USB Port Replicator?

    Does anyone know if there will be Vista 64 support for the "Lenovo Enhanced USB Port Replicator"?
    Thanks,
    A

    every port will install native under vista x64.   if displaylink isn't picked up then you can download the driver here.
    (edit: typo)
    Message Edited by erik on 09-12-2008 08:58 PM
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • GE cards supported for port- vlan based EoMPLS on 7600/sup720

    Hi,
    Can anyone explain/point where I can find de proper documentation where I can find the support for port- vlan based EoMPLS support cards on a 7600 with a sup720 engine on the CCO site ?
    WHich GE port cards are supporting EoMPLS and which GE cards will support it not.

    try
    www.cisco.com/go/fn
    -Waris

  • SNMP MIB for Solstice DiskSuite 4.2

    Hi all,
    Does anybody know where I can get the SNMP MIB for Solstice DiskSuite 4.2 ?
    Any help will be appreciated,
    Thanks,
    Simon

    Yes, but some versions of VxVM require a 'rootdg' remain. You may or may not prefer to simply use VxVM to mirror root.
    The packages are on disk2 of the installation media in the EA folder.
    Darren

  • SNMP MIB file download needed for Laserjet 5550 and 1505n. Paper out, Paper jam etc.

    Please assist me. I need MIB files for SNMP messages like paper out, paper jam, etc. The printers are LaserJet 5550 and 1505n. HP rules.
    This question was solved.
    View Solution.

    Thank you for the help. I found out in a different manner but here it is:
    On the rightmost side you can see the adress and in the middle the data type and name. They are all at position 0.
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperJam,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.9
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperOut,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.8
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PeripheralError,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.6
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_ConnectionTerminationAck,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.5
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_NewMode,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.4
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_InterventionState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.3
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_AtBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.24
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_TcpBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.23
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_LlcBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.22
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_NovBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.21
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Reserved,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.20
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.2
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperOutput,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.19
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Printing,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.18
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_DoorOpen,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.17
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Initialize,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.16
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Wait,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.15
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Busy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.14
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_IoActive,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.13
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_MemoryOut,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.12
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PagePunt,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.11
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_TonerLow,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.10
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_LineState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.1
    I hope it's useful for someone also.
    Best regards to all forum users!
    Cristian

Maybe you are looking for