C370 - Problem changing password from GUI

Hi,
I'm facing a problem when trying to change password when it's expired (by password policy) at C370 w/ 7.6.3-019.
Already tried at IE 9.0 and FF 24.6.0 ED without success. The only way I can change password is from CLI.

Is this per the System Administration > Local User Account & Password Settings, w/ password reset rules set there?  Specific account/admin account?  Or a custom defined account?
From what you describe - sounds like would fall in-line with standard procedures if admin account related...
If you lock the admin account, you can only unlock it by logging in as the admin through a serial communications connection to the serial console port. The admin user can always access the appliance using the serial console port, even when the admin account is locked.
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

Similar Messages

  • Cannot change password from OS X

    I just tried to change my Skype password from my Mac running OS X 10.6.8. I tried in both Safari and Chrome, but once I put my old password in, I could not tab into the next field not select it with my mouse. I finally got my password changed by logging in from my iPad. That's funny, as it's usually the other way around. Some sites that work fine in a desktop OS don't work right in Mobile Safari.

    Try booting from your 10.1 DVD and going to Utilities/Reset Password.
    User Password Reset (3)

  • AUDIT action (create, delete, privilege escalation, set and change password from users account and group) users and admins in Solaris 10

    Hello.
    in Solaris 10 i need auditing process create, delete, privilege escalation, set and change password and etc... from users account and group.
    I set settings:
    in file syslog.conf:
    *.info;mail.none;cron.none;audit.notice            @IP-Remote-syslog-server-SIEM
    in file   /etc/security/audit_control:
    dir:/var/audit
    flags:lo,ad,ex,cc,am,no,fc,fd
    minfree:20
    naflags:lo
    plugin:name=audit_syslog.so;p_flags=lo,ad,ex,cc,am,no
    in file   /etc/security/audit_user:
    root:lo,ad:no
    Now I see in the logs only the fact of a connection via SSH and run processes on behalf of users. Creation. delete users, change passwords for some reason do not is logged.
    Many users. For each individual write permissions in the file /etc/security/audit_user not possible, it is likely to forget any new user (or there is a possibility in this file one line to describe the audits for all accounts?)
    Where is the mistake?

    You are most likely hitting Bug 15779000 user/role/groupadd/mod/del don't audit their use.
    And the fix is only available in S11.2.
    -- Renaud

  • User having problem changing password on Windows 2008 R2 via remote desktop win7

    I have a remote user in another building with OS 7 remote destkop to Windows 2008 R2 Server.  The users account is set to change password on first login.  when the users trys to change his pw he gets error "Configuration information could not be
    read from domain controller, either because the machine is unavailable, or access has been denied.
    We are not using domain controller on the Windows 2008 R2 Server it is set to workgroup.
    Any help ASAP would be greatly appricated.
    Thanks,
    Rob Jung

    Here is one of the event logs from when the user tried to logging (and change password on the first login):
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          10/13/2011 5:09:11 PM
    Event ID:      4625
    Task Category: Logon
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      win007.#***.net
    Description:
    An account failed to log on.
    Subject:
     Security ID:  SYSTEM
     Account Name:  WIN9$
     Account Domain:  ***
     Logon ID:  0x3e7
    Logon Type:   2
    Account For Which Logon Failed:
     Security ID:  NULL SID
     Account Name:  Administrator
     Account Domain:  WIN007
    Failure Information:
     Failure Reason:  Unknown user name or bad password.
     Status:   0xc000006d
     Sub Status:  0xc000006a
    Process Information:
     Caller Process ID: 0x254
     Caller Process Name: C:\Windows\System32\winlogon.exe
    Network Information:
     Workstation Name: WIN007
     Source Network Address: 127.
     Source Port:  0
    Detailed Authentication Information:
     Logon Process:  User32
     Authentication Package: Negotiate
     Transited Services: -
     Package Name (NTLM only): -
     Key Length:  0
    This event is generated when a logon request fails. It is generated on the computer where access was attempted.
    The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
    The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
    The Process Information fields indicate which account and process on the system requested the logon.
    The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
    The authentication information fields provide detailed information about this specific logon request.
     - Transited services indicate which intermediate services have participated in this logon request.
     - Package name indicates which sub-protocol was used among the NTLM protocols.
     - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{*******}" />
        <EventID>4625</EventID>
        <Version>0</Version>
        <Level>0</Level>
        <Task>12544</Task>
    Rob Jung ADRWeb

  • Changing password from a Windows XP computer for a Mac managed domain

    I've experimented a little with this a did a search but can't seem to find information on it...
    We have an Apple Xserve running OS X 10.4 and I am considering using it to manage a Microsoft Windows domain for our Windows PCs. It seems quite capable of doing that.
    However, I was trying out changing a user password (user and password are from the Apple Open Directory server) from a Windows PC on another domain using the usual method you would do that: username, domain (actually exists on the Apple), old password, new password, etc. There seemed to be something missing as it didn't work.
    Will this only work if the PC is part of the Domain for the username that needs the password changed? You can change passwords across Domains normally if doing this from a Windows PC, in my experience.
    I need to be sure that MS Windows users will be able to change their passwords from their PCs before I move any MS Windows computers on to the Apple Server managed Domain.
    Anyone have information on this?
    Thanks.

    nslookup resolves the DNS name when on both the server and the client MS windows PC.
    I re-started the Windows service on the server and it now shows in the domain and is accessable through browsing the MS Network "My Network Places". So all of that was probably a tangent.
    I've tried the password changing again a few times since but no luck. The server logs seem to show failed authentication for user "admin" but the username I was trying to change the password for was another username. ???

  • Exchange 2010 user cannot change password from OWA

    My users are not able to change their own email password from owa. But we can change the passwords from ECP or from the server without any issue. What could be the issue ?
    Biju Rajan

    Check the regional date and time is set for user OWA...Follow the below steps
    On the Client Access Server (CAS), click Start > Run and type
    regedit.exe and click OK.
    Navigate to HKLM\SYSTEM\CurrentControlSet\Services\MSExchange OWA.
    Right click the MSExchange OWA key and click New >
    DWord (32-bit).
    The DWORD value name is ChangeExpiredPasswordEnabled and set the value to
    1.
    Note: The values accepted are 1 (or any non-zero value) for "Enabled" or 0 or blank / not present for "Disabled"
    After you configure this DWORD value, you must reset IIS. The recommended method to reset IIS is to use
    IISReset /noforce from a command prompt.
    Ref:http://blogs.technet.com/b/exchange/archive/2010/10/06/3411240.aspx
    Exchange Queries

  • Problem Changing Password

    When I Go to change my password, there is just an endless loop of it asking me for my password and then it authenticates. Whenever i typre in my original password, it tries to authenticate and then asks for my password again. then authenticates and asks again and so on

    Having the same problem, ever find a solution?

  • Change password from the webmail OSX 10.4.5 - INSTRUCTIONS

    Working with OSX 10.4.5
    This instruction is based on hints found in this and other forums on the web,
    thanks to all the people who worked on this solution!!!
    Download the "change_passwd". Follow the instruction from the plugin.
    Change some files as follow:
    1)Set these values in config.php:
    $overridePathToChpasswd = '/usr/bin/pwpolicy';
    $pathToPw = '/usr/bin/pwpolicy';
    2)In options.php I commented out the lines below if (! empty($pathToPw))
    //$fd = popen("$pathToPw usermod $safe_user -h 0 2>&1", 'w+');
    //fwrite($fd, $safe_newpw);
    //$ret = fread($fd, 4096);
    //pclose($fd);
    add:
    $cmd = "$overridePathToChpasswd -a $safe_user -p $safe_oldpw -u $safe_user -setpassword $safe_newpw";
    exec($cmd, $capt, $ret);
    3)In functions.php change this line:
    Line 28 of this file is trying call a function that has changed names.
    CHANGE:
    compatibilitycheck_plugin_setup('changepasswd', array('config.php'));
    TO:
    checkplugin_setup('changepasswd', array('config.php'));
    4) In options.php:
    Line 39 of this file is trying to include a file from src instead of
    include where validate.php actually lives.
    CHANGE:
    include_once ('../src/validate.php');
    TO:
    include_once ('../include/validate.php');
    Enjoy!

    I am not going to say that I originated this hack, but since I came up with the hack to the plugin and it works for me, and I also implemented some other functions like checking for alpha and numeric characters (since we have that set on our LDAP password policy), here you go. I would post it on our server here at work, but I figured someone might have a better place for it, maybe petrobyte or someone can host it.
    http://download.yousendit.com/BD5AC8E94D848A18
    Hope it works for ya'll!
    If you plan on making the hack yourself, it helps to have an understanding of php and HTML, and a good understanding of using the "command line".

  • Problem changing TrackMode from Plot&Cursor (TrackAll) to ZoomXYRectangle

    I'm using a CWGraph control from Measurement Studio 6.0 in a C# application.
    I want the user to be able to switch between tracking modes on the fly - I use Plot&Cursor mode to allow them to right-click on a point and get more information. But when I switch to ZoomXYRectangle mode, it does not work (it does not allow me to zoom).
    Am I missing something? The same functionality works fine on the 3D Graph (switching from TrackAll to TrackZoomPanRotate).
    Thanks,
    Natalie

    This is pretty strange ... I played around with the project for a while and there seems to be something about bringing up the context menu that throws something off. If you comment out the line of code that shows the context menu, the problem doesn't reproduce anymore. Also, if it's not working after you switch to zoom mode, you can right-click anywhere on the graph and then try to zoom, and it'll work.
    Off the top of my head I can't think of a good reason why this is happening. Since it will work again if you right-click anywhere on the graph, you could hack a workaround by sending a message to the AxHost that's hosting the ActiveX control to make it think that it received a right-click. It's a total hack to fix it, but it does work. Here's some
    sample code that shows how to do this:
    // Place this code somewhere in the form class:
    [System.Runtime.InteropServices.DllImport("user32.dll")]
    private static extern int SendMessage(IntPtr hWnd, int msg, int wParam, int lParam);
    private const int WM_RBUTTONUP = 0x0205;
    private const int MK_RBUTTON = 0x0002;
    private static int MAKELPARAM(int low, int high)
    return ((low & 0xffff) | ((high & 0xffff) << 16));
    // Change the CheckedChanged event handler for the zoom radio button so that
    // the message is sent when the track mode is changed.
    private void zoom_CheckedChanged(object sender, System.EventArgs e)
    if (zoom.Checked)
    axGraph.TrackMode = CWUIControlsLib.CWGraphTrackModes.cwGTrackZoomRectXY;
    SendMessage(axGraph.Handle, WM_RBUTTONUP, MK_RBUTTON, MAKELPARAM(1, 1));
    - Elton

  • Problems Changing Password

    When I go to Users, select a user then choose "Reset Password," I'm presented with a dialog asking for the new password, verification, and an opportunity to check "Require password change at next login." After changing the password that user can no longer log in to Wiki services.
    I've tried starting and stopping Open Directory. I've tried stopping and relaunching Server.app. I've tried verifying permissions on the server. I've tried editing the password in Workgroup Manager. Nothing works. That user can no longer log in to wiki. Oddly enough, they can log in to the FTP server.
    How can I restore access to the wiki site to that user?
    Mac Mini Server
    Mountain Lion OS X 10.8.3
    Server.app 2.2.1
    Workgroup Manager for OS X 10.8

    When you write
    Two services only are available to users, namely Wiki and FTP.  After resetting a user's password in the Server app they can no longer log in to the Wiki server with any password, new or old. They can still access FTP using the old password.
    Do you have the 'Require password changing at next login' checkbox ticked ?  If so, they need to do that before they regain access to Wiki and FTP.  If this box is set you absolutely need to sit at a Mac and login at the login prompt before you can do anything else with that account, including using the web interface to change your password.  If you don't want this, just leave that checkbox unchecked.  In fact you can go in via Workgroup Manager and uncheck it for those accounts now, and check to see if that fixes your problem.
    I assume, by the way, that you're using Open Directory to hold your accounts, you have only one Open Directory server (rather than a tree of them) and that changes you make to account details haven't disappeared then next time you go into Workgroup Manager.

  • Is it possible to invoke 'change password' from lock screen/siri?

    I've a similar situation as in  https://discussions.apple.com/message/23875981#23875981
    I set the passcode using international keyboard with 'dead key' characters. The keyboard module in the change passcode application worked correct to change my two keystrokes to one. But the lock screen's keyboard is not behaving the same and I'm locked out now. (even though I know my password!)
    Is it possible to change the password while in lock screen? Or is there any other solution for this issue other than restoring the iphone?

    If the passcode will not work, the only alternative is to restore the phone as new. You cannot change the passcode from the lock screen.

  • Will not let me change password from original one that came with it

    Hi.
    I cannot change the original password(via Advanced/Administration/Set password. Every time I type in the new password I want to use, hit apply...

    I'm using the Traffic Monitor on my WNDR3700 - works fine.
    However, it appears that the 50mb I'm supposed to be getting from Comcast is often more...

  • Unable to change password from admin console getting the following error

    BEA-159907
    USER admin INVOKED ON Security:Name=myrealm AD METHOD getCurrentName PARAMS Users6839815711
    Info: USER user INVOKED ON objectId METHOD method PARAMS params
    can any one help me out

    Hi,
    Please try changing it using WLST Script: http://middlewaremagic.com/weblogic/?p=4334
    or still if you are facing any issue then Reset the Admin Server Account Using: http://middlewaremagic.com/weblogic/?p=323
    Or else please post the complete Stack Trace from the Server Log.
    Thanks
    Jay SenSharma

  • Help: Changing password from Forms 5.0

    I want to design an application which should confirm previous user password and give the option to change it, for specific user....
    Thanks in Advance

    hi
    I will email you a form
    null

  • Unable to change password from application when Oracle password has expired

    I need to know how to change the users
    (Oracle 9.0.8) password via Visual Basic (v6.0
    SP3) and RDO. If the users password is expired,
    the proper error message is returned, but because
    the user isn't connected to the database, I
    cannot change the password with the "ALTER xxx
    IDENTIFIED BY xxx" sql. Anyone got any
    suggestions??

    you have to unlock it with some other user with the alter user privilege (e.g. sys or system), or (if you use OID) some user with DAS privileges.

Maybe you are looking for