C3750G IP BASE upgrade to IP SERVICE with stacking four switches
Dears
Existing i have 4 x C3750G IP BASE with stacking, now need upgrade to IP service for BGP support.
Order from reseller PN: CD-3750G=EMI=.
I want ask need purchasing 4 x "CD-3750G=EMI=" or just purchasing 1 only for 4 x switches. I checked Cisco supportforums C3750G not support license activation.
Many Thanks
Wong
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
My understanding has been the 3750 series will allow you to (legally) run a whole stack with an IPServices image as long as one stack member has a license for IPServices.
For redundancy, you should have at least two stack members with IPServices, otherwise if the sole IPServices master fails, the whole stack reverts to IPBase.
Similar Messages
-
I recently upgraded my internet service with Comcast for faster internet. When I use an ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed. I have an airport extreme...3-4 years old. Why is the speed so different and are there settings I can change to increase the wireless speed?
If your supposed to be getting 20 Mb/s down via your ISP and both Mac's are not getting that on the SpeedTest, then obviously your router appears to be the cause.
Connect one Mac directly to the ISP's modem, power off/wait 30 seconds/then power on, then power on the Mac. The ISP will connect directly to the Mac, then run a SpeedTest.
Then repeat the same for the other Mac. If both Mac's have a problem then it's possibly the ISP, the modem, your lines to them or on your property, or both Mac's are messed up.
You'll have to keep searching for the cause. Call your ISP and ask then to run a test to see if your getting your 20 Mb/s to your modem, that should clear part of the problem.
Diagnosing network issues -
Upgrade 2010 to 2013 with SQL Reporting Services
I'm getting ready to upgrade to 2013.
When I run the Test-SPContentDatabase I get:
Category : MissingWebPart
Error : True
UpgradeBlocking : False
Message : WebPart class [ab6d9dad-e23c-ce4f-ff98-f6575a1ccf4c] (class [
Microsoft.ReportingServices.SharePoint.UI.WebParts.ReportView
erWebPart] from assembly
[Microsoft.ReportingServices.SharePoint.UI.WebParts,
Version=10.0.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91]) is referenced [24] times
in the database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this web part.
Remedy : One or more web parts are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
web parts.
Locations :
Category : MissingAssembly
Error : True
UpgradeBlocking : False
Message : Assembly
[Microsoft.ReportingServices.SharePoint.UI.ServerPages,
Version=10.50.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91] is referenced in the
database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this assembly.
Remedy : One or more assemblies are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
assemblies.
Locations :
Category : Configuration
Error : False
UpgradeBlocking : False
Message : The [is.photomask.com] web application is configured with
claims authentication mode however the content database you
are trying to attach is intended to be used against a
windows classic authentication mode.
Remedy : There is an inconsistency between the authentication mode of
target web application and the source web application.
Ensure that the authentication mode setting in upgraded web
application is the same as what you had in previous
SharePoint 2010 web application. Refer to the link
"http://go.microsoft.com/fwlink/?LinkId=236865" for more
information.
Locations :
The first two have to do with reporting services. I'm trying to workout how to go about getting these errors to go away. I don't want to remove SQL reporting or migrate a broken site and fix it later. FYI it does migrate but reporting services
is of course broken.
So what I was wanting to do was to upgrade SQL Reporting Services for SharePoint 2010 from 2008 SQL to 2014 SQL first. This would be in the hopes that it would make the migration to SharePoint 2013 work as the assemblies would change to the proper
version.
Can anyone elaborate on my upgrade path?
I'm still looking up the "Claims Based" authentication thing. I've found an article on how to migrate it so not a big deal. I do wonder however if this is tied to the issue I saw with default.aspx and home.aspx being denied to all users
after I did migrate a content db.
David JenkinsHi David,
The following sections describe the basic steps needed to upgrade or migrate from 2008 versions of Reporting Services SharePoint mode to 2014 version.
SQL Server 2008 R2 to SQL Server 2014
Starting environment: SQL Server 2008 R2, SharePoint 2010.
Ending environment: SQL Server 2014, SharePoint 2010.
In-place upgrade is supported and there is no down time for your SharePoint environment.
Install the SQL Server 2014 version of the Reporting Services add-in for SharePoint on each web front-end in the farm. You can install the add-in by using the SQL Server 2014 installation wizard or by downloading the add-in.
Run SQL Server 2014 installation to upgrade SharePoint mode for each “report server”. The SQL Server installation wizard will install the Reporting Services Service and create a new Service application.
If you also want the ending environment to run SharePoint 2013, you need to complete a database-attach upgrade of the SharePoint 2010 to SharePoint 2013.
For more scenarios information, please refer to:
http://msdn.microsoft.com/en-us/library/ms143747.aspx#bkmk_sharePoint_scenarios
Per the supported combinations of SharePoint and Reported Services Components, I’d recommend you firstly upgrade Reporting Services to 2014, then upgrade SharePoint to 2013.
For more information:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
The link below is the reference for migrating a Reporting Services:
http://msdn.microsoft.com/en-us/library/hh759331.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Since I upgraded my iPad from iOS5 to ios7 my iPad will only work on one network.
However in the top left hand corner is says no service with 3G next to it.
I took it to Apple istore in clearwater mall and they couldn't help me.
Please advise me on how to sort the problem out.
Kind RegardsI have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
I have upgraded my iPhone 5 with iOS7 and I can´t turn on location services. I have already restored the instalation of oOS 7 twice but no change. This should be the improvement of apple software? Does anybody have similar problem? Do you know how to solve it?
A workaround is to reinstall lazy apps, mostly for those that were restored but don't appear on notification center, eg. Whatsapp. In my case I have more than 500 apps installed.
We need a correct solution for this problem.
I also had this problem on the past moving from 4s to 5.
And now from 5 to 5s.
The only notifications working after restore in my iPhone are those from Facebook. -
My TomTom does not work following the upgrade to IOS 6.0 - I am getting poor GPS reception on my iPhone 3 using my TomTom car kit ( worked fine prior to upgrade!). I have tried to reset Location Services with no luck! - Help...
Aa2009 wrote:
he could have a 3gs but doesn't state 3g or 3gs
Look at his tag line -
Right now I am working in a temporary site format. I am hosting the website on my own computer. How to I take it from a temporary site to a live site? Do I need to upgrade my service with abode and does this cost more per month?
Hi Traci,
To push the site live, you will need to:
Publish a trial site on BC (File menu> Publish)
Then, go to the admin dashboard of your site and the launch the site live by paying for it or redeeming a free site.
Add domain to the site
Change name-servers at domain registrar
For steps 3 and 4, kindly refer to the following link:
http://docs.businesscatalyst.com/user-manual#!/site-settings/site-domains/change-the-domai n-name-of-your-site
The following link might also be helpful:
Launching a Muse Site | Adobe Muse CC
Regards,
Sonam -
My contract on my family's plan is up today and I am switching to another carrier, but my new phone isn't in yet, so I haven't activated my service with the new carrier. Will I still get service through Verizon until then on a month-to-month basis, or will I just get cut off unless I start a new contract with them?
As long as you pay your bill you will have service. The 2yr service contract is simply because you requested a phone at a discount which means you have to keep VZW for 2yrs. Once you complete the 2yr agreement you are no longer under a contractual obligation to keep using VZW. You are month to month for that line and also have the ability to upgrade or utilize the Edge program if your account qualifies. If you do nothing your service will stay active as long as payments are made in a timely manner.
-
Problems with Comodo Kill Switch, Windows Services & Bitlocker Encryption on Asus N56VZ
Hi All,
So recently I found myself stuck in a different scenario than before, and after many hours researching and efforts to fix this I still find myself stuck yet with a few options still to fix.
What is the problem?
So as a security cautious user when i first got to Windows 8.1 Pro 64Bit I encrypted both the C and D drive (Split the main disk) to protect myself and my family. Unfortunately that has not been very helpful with the way in which booting and running from
either external USB devices or CD/DVD works, not allowing myself to at all.
My usual security suit I use is Comodo Internet Security, which additionally comes with Comodo Kill Switch. Whilst using the application instead of stopping one of the TCP connections I was meant to I accidently stopped an Windows Explorer connection.
For some reason since then Windows Explorer, nor most windows apps or services themselves will run. For example msconfig will run but sfc /scannow or mmc will not, whether in safe mode or normal mode.
What Caused the Problem?
Cannot 100% say
What I Think Caused the Problem?
Myself running Comodo Kill Switch stopping a vital server connection with Windows Explorer that messed up alot. Or a potential Virus unknown how cannot fully scan system as wont boot externally or run many apps.
Additional Info
Asus Webcam is Disabled on Purpose
Laptop was fully customized to run latest games full graphics minus Anti Aliasing, works with Evolve + CoD Advanced Warfare
Laptop does not boot if USB Keyboard plugged in, works with everything else normal (had this on other systems no problem for me)
Ask me for more info if required to add here, braindead again
Specifications of my system
Intel® Core™ i7 3610QM Processor
Windows 8.1 Pro 64Bit
Intel® HM76 Chipset
DDR3 1600 MHz SDRAM, 2 x SO-DIMM 8GB
15.6" HD (1366x768)/Full HD (1920x1080)/Wide View Angle LED Backlight
NVIDIA® GeForce® GT 650M with 2GB DDR3 VRAM
1TB 5400RPM OR 750GB 5400/7200RPM (Cannot remember off top of head, braindead)
Super-Multi DVD
Kensington lock (Security Feature)
LoJack (Security Feature)
BIOS Booting User Password Protection (Security Feature)
HDD User Password Protection and Security (Security Feature)
Pre-OS Authentication by programmable key code (Security Feature)
What Can Run and Won't Run?
ON BOOT:
Bitlocker Encryption Password & Advanced Settings are accessible
Bios (password protected) is accessible
Windows Recovery Mode is accessible (Think it is F9 or F10)
Windows Logon Password Screen is accessible
ON NORMAL/SAFE-MODE START UP:
After Log-In Windows Explorer will not run
Task Manager will run, also allows me to browse the files when trying to start new task
Can run Command prompt
Cannot run any control panel items
Cannot run services.msc
Cannot run mmc
Cannot run sfc
Every time it metions windows drive is locked
Start Error's when running certain applications (Will post codes soon)
Rufus USB Tool does run
Cannot boot Kali Linux off USB
Cannot boot Windows 8.1 off USB
Cannot boot Windows 8.1 off DVDRW
Fixwin2 will not run
Apps either work or don't whether in safe mode or normal
Cannot use Windows Installer
What Fixes I Have Tried So Far
Ok so like any normal user I don't want to lose my files. So here are what I have tried so far:
Repair MBR (Repair Completed, No Luck)
SFC /SCANNOW (Returns Error 'Windows Resource Protection could not start the repair service')
Tried sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=c:\windows (Could not access drive)
Fixwin2 (Will not run in either normal or safe mode)
Booting using Windows 8.1 via USB (Cannot boot from extermal devices due to Bitlocker Encryption)
Booting using Kali Linux Via DVD & USB (Cannot boot from external devices due to Bitlocker Encrytption)
How do I know it is because of Bitlocker, because last time I disabled it, I could run from external devices
Tried to run bitlocker to change settings (Will not run)
Have used both password and recovery keys to unlock driver, they work but when applications are running on windows the drive is still locked?
Tried windows Automatic Diagnostic and Repair (Could not repair anything, did make a log I am still to extract from the syste)
There are No System Restore Points
I'm sure there is much more information I could post however I will leave it on an ask to know basis, apart from the log files and further information to gather. Below is my list of trial and error fixes to try for today (need more ideas and help please!):
Hiren's 15.2 Boot CD via DVD (NOT ABLE TO BOOT)
Hiren's 15.2 Boot CD via USB (NOT ABLE TO BOOT)
Research into the Bios and Possible Update in-case of implementation of Virus, can access flash utility (STILL NOT TESTED)
Try and get a portable version or a working version of windows installer to try and re-install Comodo Internet Security (STILL NOT TESTED)
Another way to disable Bitlocker
Anti-Malware / Anti-Virus Scan If Possible to Run One
Bitlocker Repair Tool, will try this also
I have posted this as have not found much info online, usually find it and crack on but this time things are a little more tricky, my priority task I really need to do is remove the Bitlocker Encryption, but if the application will not run... what do I do
then?
Thanks for your time reading all, Sorry for any poor formatting or spelling.
Update 1: MMC.exe Error Code
Ok so now have the computer in safe mode, still same as before, no explorer.exe, no services etc... Just went into the Task Manager > Services (Tab) > Open Services (Option at bottom)
This is the error I get:
'The Instruction at 0x785a746c referenced memory at 0x000000a8. The memory could not be read.
Any Ideas on what this error is and why?
Update 2: CHKDSK Works with no Fix
Update 3: Hiren's 15.2 Boot CD - USB Boot still no luck booting around Bitlocker Encryption
Just to explain again, I already have unlocked the drive with correct bitlocker password or recovery key yet the drive remains locked not allowing windows refresh of files of complete install from the windows recovery menu as keeps saying drive is lockedOk so attempt number two to write this update via bloody phone! (Just refreshed page whilst writing!)
Update 4:
Problem - cannot run from bootable devices (DVD/USB)
Cause - bitlocker fully encrypted drive stops this working
Repair - Boot up holding F9 to enter windows recovery Input Bitlocker recovery keys to unlock drives
Navigate to Command Prompt in advanced settings Execute following code:
Repair-bde c: d: -rp 000111-222333-444555-etc...
(Code found from https://technet.microsoft.com/en-us/library/ee523219%28v=ws.10%29.aspx)
Note for those using this: It is common while unlocking certain drives to get errors such as: Quote from http://www.benjaminathawes.com/2013/03/17/resolving-partial-encryption-problems-with-bitlocker/
"LOG INFO: 0x0000002aValid metadata at offset 8832512000 found at scan level
1.LOG INFO: 0x0000002b Successfully created repair context.
LOG ERROR: 0xc0000037 Failed to read sector at offset 9211592704.
(0×00000017) LOG ERROR: 0xc0000037 Failed to read sector at offset 9211593216.
(0×00000017) …followed by around 20 similar entries that differed only by the offset value"
Repair Status for Update 4: COMPLETED - However over wrote D drive data so now need to recover that
Problem 2 - windows services corrupted along with windows files
Cause - Unknown
Repair - wait until system is fully decrypted Once fully decrypted ensure boot from USB/DVD
Re-do fixes that would not work before if this has fixed boot issue Confirm fix / update post Hope anything I put here helps others also -
Even when I am using Safari or Firefox the spinning wheel of lines especially for face book just keeps spinning and it takes forever to load my pages. It was faster than this before I upgraded my internet service. I Check the speeds and those are fine (using a internet speed test). I have emptied all of my caches, cleaned my Mac with (Clean My Mac), I've taken out all old files, pictures, cleared my widgits, and I don't know what else to do. Is there some configuration I need to address some where inmy preferences? Do Ihave to just live with it? I do want to upgrade to Snow Leopard but, I can't afford that at this moment. Any ideas please forward. Another issue I have is that my IMac will not accept a DVD+Rdl but will accept any and all other DVD' and CD's what could cause that?
Sincerely,
Rochichi98A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan -
Creation of SharePoint Search service with the help of powershell.
Hi Team,
Upgraded WSS 3.0 to SharePoint 2013 Foundation red the SharePoint search.
We found log backup on the subjected server was failing due to database name,
which is more than max allowed legth. To fix the same, we may need to rename the
same to short name.
failed-1073548784)
Executing the query "BACKUP LOG [Search_Service_Application_AnalyticsRe..."
failed with the following error: "Invalid device name. The length of the
device name provided exceeds supported limit (maximum length is:259). Reissue
the BACKUP statement with a valid device name.
BACKUP LOG is terminating
abnormally."
Database Name :
Search_Service_Application_AnalyticsReportingStoreDB_2e7b13e23fde4c8397ed0be06474966f
To rename SharePoint Search it took more than 5 hours.
Is it possible to create SharePoint search using PowerShell and will get support from Microsoft for search application built this way ?
Please share information on how create SharePoint search using powershell.
Our environment: SharePoint 2013 Foundation.
Best Regards,
MaheshHi Mahesh,
To create Search Service Application in SharePoint Foundation 2013 by using PowerShell, you can refer to the links below for more details:
http://www.andrewjbillings.com/sharepoint-2013-foundation-creating-the-search-service-with-powershell-and-removing-those-pesky-guids/
http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
Best regards,
Victoria Xia
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
what is the best way to "upgrade" a powerbook g4 with a powerpc chip? it seems that many things are not supported these days. can't download software, update my iphone, download video, etc. can i get the latest software? thanks for the help!
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
Cheers, Tom -
Do i need to get internet service with an internet provider?
Do i need to get internet service with an internet provider to use airport extreme or airport express?
Well, either that, or you could simply use your extreme or express to "borrow" your neighbour's WEP encrypted WiFi network..
OH wait.. I think I got you. Are you asking if you can use the bases for just a Lan and no outside connection? You can use them without the internet. It's just an option. -
i had the service with atta while ago,however, i never upgraded it to the new software bec ,i still use like i pod,now whenever iwant todownload sth.
it tells you need to update your version of software,however, im scared if ido my i phone would be locked
i guess my question now is it ok to update without fear that my i phone get locked ? thank youYes, if it's not officially unlocked by ATT&T. Updating will lock it back to ATT&T.
-
I upgraded my Iphone 4s with the new operating system. After the upgrade was performed all my contacts were lost. How do I recover my phone contacts?
Synch them back from whatever contact manager or cloud service you stored them in.
Maybe you are looking for
-
canh someone answer me asap im currently in te process of ordering the lcd+digitizer dont want to waste my money
-
Hi, I am trying to fetch xi payload using CL_XMS_PERSIST.This is my partial code. CALL METHOD xms_persist->READ_MSG_ALL EXPORTING IM_MSGGUID = MSGGUID IM_PID = PID IM_VERSION = V
-
LSMW Routing- Standard Batch Input BDC_INSERT, screen .&. is invalid
Hello All, I am preparing LSMW for routing upload along with inspection characteristics with standard batch input method. At the time of 'Create batch input session' I am facing an error 'BDC_INSERT, screen .&. is invalid'. I have checked the forums
-
File Sharing Prefence Missing in Sharing Preferences
Hello, As the title states the "File Sharing" checkbox is completely missing from the "Sharing" panel in System Prefences. I have never seen this before and did a Google search which only revealed 1 result which was never answered. Here's what I see
-
Infotype for maintaining sal in usd
hi gurus, i have got a recquirement my organisation wants to maintain the some employess basic pay details in us $ . how to maintain that . pls help me.