C3KX-NM-10GT 3750X
Hi Team,
my end-customer have 2x WS-C3750X-24T-L and also 2x C3KX-NM-10GT. The switchs are working as a stack, I can't get link up in the Tengig interfaces. We're using CAT6a cables with just 3 meters. The cable worked between two servers with 10g nics.
It seems to me that the issue is the 10GT modules. When I reload the frulink I get the errors below:
Can't get the driver hwdb = 0x62D4530 (DTVR-3750X-2)
Failed to initialize Aquantia PHY. (DTVR-3750X-2)
(DTVR-3750X-2)
Mar 30 02:00:12.797: %PLATFORM-6-FRULINK_INSERTED: FRULink 10GT module inserted in Switch 2. (DTVR-3750X-2)Can't get the driver hwdb = 0x611B524
Failed to initialize Aquantia PHY.
Can't get the driver hwdb = 0x611D478
Failed to initialize Aquantia PHY.
If it was just one module and one switch I would think that is hardware, but in two different switchs and modules...
I've tested two different versions:
15.2(1)E1 and 15.0(2)SE5
- reload the entire stack;
- put the switch in standalone;
- re-seat the module;
- tried to enable ipservices license;
Nothing worked.
Any help would be great.
Thank you.
BR,
Norberto Salgado
Hi All,
I have the same problem also below are the error :
Can't get the driver hwdb = 0x716DFFC
Failed to initialize Aquantia PHY
Mar 30 01:50:52.840: %PLATFORM-6-FRULINK_INSERTED: FRULink 10GT module inserted in Switch 2
The problem only happend in the slave switch, the 10GT module in the master swicth is working and I can use the tenG interface.
Best regards,
Gagan
Similar Messages
-
Installing c3kx-nm-10gt module in Catalyst 3560-X-24T-L
I am attempting to install a C3KX-NM-10GT network module into my Catalyst 3560-X-24T-L switch. Any time I do this, the interface fails to operate, and the web-based status interface fails to operate correctly until the system reboots. When I connect using the CLI, it sees the 10Gigabit interfaces, but they will not operate when I connect a device. Utilizing the shutdown and no shutdown commands does not seem to affect the interface.
Current software version on the switch is 15.0(2)SE7 IP Base.
Any thoughts would be appreciated.Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
If it's not a license issue, then it's possible you have a hardware issue, with either the switch or the module.
BTW, you might be able to enable IPBase license, in a timed evaluation mode. If so, you could use that to rule out the license question. -
Hi All,
I have a C3KX-NM-10GT installed in a WS-C3750X-48T-S with ios 150-2.SE7 and IP Base installed
The problem i'm having is i can't get the ports online, the closest i get is a slow blinking green light
I have CAT6 plugged into the C3KX-NM-10GT and the other end is a cisco4948
any ideas would be greatly recieved as this is driving me crazy
Switch#sh inv
NAME: "1", DESCR: "WS-C3750X-48"
PID: WS-C3750X-48T-S , VID: V04 , SN: FDO1703R0HP
NAME: "Switch 1 - Power Supply 0", DESCR: "FRU Power Supply"
PID: C3KX-PWR-350WAC , VID: V02D , SN: DCB1703920V
NAME: "Switch 1 - FRULink Slot 1 - FRULink Module", DESCR: "FRULink 10GT Module"
PID: C3KX-NM-10GT , VID: V01 , SN: FDO15160J2L
Switch#sh ve
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.0(2)SE7,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 23-Oct-14 12:32 by prod_rel_team
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTW
ARE (fc1)
Switch uptime is 17 hours, 25 minutes
System returned to ROM by power-on
System restarted at 01:27:32 UTC Wed Mar 30 2011
System image file is "flash:c3750e-universalk9-mz.150-2.SE7/c3750e-universalk9-m
z.150-2.SE7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco WS-C3750X-48 (PowerPC405) processor (revision A0) with 262144K bytes of me
mory.
Processor board ID FDO1703R0HP
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
52 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : B0:FA:EB:CE:97:00
Motherboard assembly number : 73-12552-08
Motherboard serial number : FDO17030XA2
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750X-48T-S
Daughterboard assembly number : 800-32727-03
Daughterboard serial number : FDO17030U83
System serial number : FDO1703R0HP
Top Assembly Part Number : 800-31326-07
Top Assembly Revision Number : B0
Version ID : V04
CLEI Code Number : COMJT00ARD
Hardware Board Revision Number : 0x04
Switch Ports Model SW Version SW Image
* 1 54 WS-C3750X-48 15.0(2)SE7 C3750E-UNIVERSALK9-M
Configuration register is 0xF
Switch#sh hw-module switch 1 port-group all
Switch Port-Group Active Inactive
1 1 Gi1/1/2 Te1/1/1
1 2 Gi1/1/4 Te1/1/2
Switch#
Switch#
Switch#sh platform pm module-info
FRULink Slot: FRULink 10GT
Module Status
Present : Yes
Supported : Yes
Authenticated : Yes
Module UDI Information
Product ID : C3KX-NM-10GT
Version ID : V01
Serial Number : FDO15160J2L
Board ID : 0x03
SEEPROM contents (hex) size 256:
0x00: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x10: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF 46 44 4F 31 35 31 36 30 4A 32 4C
0x60: 00 00 00 00 00 FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF 43 33 4B 58 2D 4E 4D 2D 31
0x80: 30 47 54 20 20 20 20 20 20 56 30 31 FF FF FF FF
0x90: FF FF FF FF FF FF FF FF FF FF FF FF 00 03 FF FF
0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FFThanks for repying Madhukrishnan,
The interface's are down/down i have issued the no shut to both the vlan and the interface's
GigabitEthernet1/1/1 is down, line protocol is down (notconnect)
Hardware is not present
Hardware is Gigabit Ethernet, address is b0fa.ebce.9731 (bia b0fa.ebce.9731)
MTU 1500 bytes, BW 10000 Kbit/sec, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
GigabitEthernet1/1/2 is down, line protocol is down (notconnect)
Hardware is Gigabit Ethernet, address is b0fa.ebce.9732 (bia b0fa.ebce.9732)
MTU 1500 bytes, BW 10000 Kbit/sec, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex, Auto-speed, link type is auto, media type is 1G/10GBaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
GigabitEthernet1/1/3 is down, line protocol is down (notconnect)
Hardware is not present
Hardware is Gigabit Ethernet, address is b0fa.ebce.9733 (bia b0fa.ebce.9733)
MTU 1500 bytes, BW 10000 Kbit/sec, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
GigabitEthernet1/1/4 is down, line protocol is down (notconnect)
Hardware is Gigabit Ethernet, address is b0fa.ebce.9734 (bia b0fa.ebce.9734)
MTU 1500 bytes, BW 10000 Kbit/sec, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex, Auto-speed, link type is auto, media type is 1G/10GBaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
TenGigabitEthernet1/1/1 is down, line protocol is down (notconnect)
Hardware is Ten Gigabit Ethernet, address is b0fa.ebce.9735 (bia b0fa.ebce.973
5)
MTU 1500 bytes, BW 10000 Kbit/sec, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 10Gb/s, link type is auto, media type is 1G/10GBaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
TenGigabitEthernet1/1/2 is down, line protocol is down (notconnect)
Hardware is Ten Gigabit Ethernet, address is b0fa.ebce.9736 (bia b0fa.ebce.973
6)
MTU 1500 bytes, BW 10000 Kbit/sec, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 10Gb/s, link type is auto, media type is 1G/10GBaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
Switch#
Switch# -
Am I missing something with the 3560X Visio Stencil?
Hi All,
Just updating my latest network diagrams and the 3560X stencil looks like it's half finished.
Compared to the old 3560 stencil I think it looks terrible.
After seeing it for the first time I thought I would be able to add in the C3KX-NM 1G and 10G Modules but I can't find them anywhere, the 48 gig ports look as though you should be able to drop something in them as well.
Has anyone else had similar problems?Hi Martin,
We have a set of new shapes in the works for the following Catalyst products that were requested by the product group. They will be completed before the end of the year. I hope this will provide what you (and others in this thread) are looking for.
Regards
Brett:
WS-C3750V2-48PS-S Front
WS-C3560-12PC-S front
WS-C2960CG-8TC-L Front
WS-C3750V2-48PS-S Rear
WS-C3560-12PC-S rear
WS-C2960C-8TC-L Front
Cisco 1000BASE-LX/LH SFP
WS-C3560CG-8TC-S Front
WS-C2960C-8TC-S Front
Cisco 1000BASE-SX SFP
WS-C3560CG-8PC-S Front
WS-C2960C-8PC-L Front
Cisco 1000BASE-ZX SFP
WS-C3560CPD-8PT-S Front
WS-C2960C-12PC-L Front
C3KX-NM-1G
WS-C3560C-8PC-S Front
WS-C3560CG-8PC-S Rear
C3KX-NM-10G
WS-C3560C-12PC-S Front
WS-C2960CPD-8PT-L Rear
C3KX-NM-10GT
WS-C2960CPD-8TT-L Front
WS-C3560CG-8TC-S Rear
C3KX-SM-10G
WS-C2960CPD-8PT-L Front -
HP 6600 connected to Cisco 3750
Hello,
I have a new hp 6600-24XG 10gb switch. I would like to connect it to an existing cisco 3750 core switch so the hp will see the network. Is it possiblle to connent one of the 10 gig ports to the 3750's one gig port and set the speed to one gig?
Would I have to buy a module for one or the other of will this just now work?
I appreciate any feedback.
Thank youmiczellcisco wrote:Hello,I have a new hp 6600-24XG 10gb switch. I would like to connect it to an existing cisco 3750 core switch so the hp will see the network. Is it possiblle to connent one of the 10 gig ports to the 3750's one gig port and set the speed to one gig? Would I have to buy a module for one or the other of will this just now work?I appreciate any feedback.Thank you
According to HP's product page, the ports in that switch are 10 GbE only - so no you can't connect to it at one gig.
You could buy a 10 gig module for your 3750 switch - a C3KX-NM-10G (SFP), C3KX-NM-10GT (Copper) or C3KX-SM-10G (SFP with advanced features like Netflow), install it and use that to link to your HP switch.
Cheers -
C3kx-pwr-440wdc in 3750X Stack
hi All,
Last year we purchased a series of 3750X switches, but at the time didn't realize that the spare power supplies that were ordered were DC instead of AC. I can't replace them at the moment, and I do not have a DC source to supply power to them.
Does anyone have suggestions of equipment I can use to convert a standard 120V AC socket to the required -36 -72V DC to power the power supplies. I am thinking that I can just use a AC to DC converter to power them, but I don't know where to get a AC/DC converter that would work and I was hoping maybe someone on the forums here would have some suggestions on how to accomplish this!
Thanks!C3KX-PWR-440WDC Catalyst is a 3K-X 440W DC Power Supply.
-
C3kx-pwr-440wdc is 3750X Stack
hi All,
Last year we purchased a series of 3750X switches, but at the time didn't realize that the spare power supplies that were ordered were DC instead of AC. I can't replace them at the moment, and I do not have a DC source to supply power to them.
Does anyone have suggestions of equipment I can use to convert a standard 120V AC socket to the required -36 -72V DC to power the power supplies. I am thinking that I can just use a AC to DC converter to power them, but I don't know where to get a AC/DC converter that would work and I was hoping maybe someone on the forums here would have some suggestions on how to accomplish this!
Thanks!C3KX-PWR-440WDC Catalyst is a 3K-X 440W DC Power Supply.
-
CiscoWorks LMS 4.0.1 + Catalyst 3750X - User Tracking Issue
Hello all,
We just deployed some Catalyst 3750X-48PF-L switches. I noticed that the user tracking report doesn't work normally.
The switches have C3KX-10Gb NM modules, and all access port are 1 Gbit. But in the User Tracking report, I see devices found on Fa0/43 for example (this is because the previous switch was a Catalyst 2960. I deleted the old switch and add the new 3750X, so this could not be the cause of the problem).
I installed all the patches that are available for LMS 4.0.1.
Could anybody help me please?
Thanks in advance!Any old entries won't automatically be removed until they age out (I believe 90 days is the default time). You can override / modify that by going in to Admin > Network > Purge Settings > User Tracking Purge Policy.
If that fails, you could re-initaitlize the User Tracking db and re-run a Major Acquisition to refresh everything but that would also have the effect of deleting all historical UT entries you may want to keep.
To reinitialize a db, please see the procedures posted here. ANI is the db used by User Tracking. -
Monitoring 3750x and 3560x Redundant Power Supply and Fans
I need help for monitoring the redundant power supply of my switches (3750x and 3560x)
I have configured my snmp on my switches and is able to monitor interfaces, temperature and etc.
The problem is when I am monitoring the redundant power supply and fans.
I am using two Cisco C3KX-PWR-350WAC Modular Power Supply per switch.
The OID I use to monitor the PSU are the following:
Power Supply 1
.1.3.6.1.4.1.9.9.13.1.5.1.3 Instance: 1003
Power Supply 2
.1.3.6.1.4.1.9.9.13.1.5.1.3 Instance: 1004
When I do an SNMP walk, the value is showing (1) which means normal.
When I simulate a power outage on power supply 1 or 2 by unplugging the power source, the value doesn't change and is still (1).
Values: normal(1), warning(2), critical(3), shutdown(4), notPresent(5)
As for the Fans:
When I remove the fan module, I am able to get a notification that the fans are down, but when I plug back the fan module it is now using a different instance.
Below is my config for SNMP:
snmp-server community XXXXXXXXXXXXXX RO
snmp-server location XXXXXX
snmp-server contact XXXXXX
snmp-server chassis-id Cisco3560X
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps transceiver all
snmp-server enable traps tty
snmp-server enable traps license
snmp-server enable traps cpu threshold
snmp-server enable traps syslog
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps port-security
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps errdisable
snmp-server enable traps vlan-membership
snmp-server host X.X.X.X version 2c XXXXXXXXXXXXXX
Note: This problem is the same for all of my 3560X switches and 3750X switches. I am not sure if I am monitoring the wrong OID.
Thanks in advanceHi ,
You are running an old IOS code , definitely you are hitting a BUG .
there is no workaround or I would say unfirtunetely you will not be able to get the correct power supply status via SNMP.
you need to use command line for this.
I mean "show env all "
**** if you want to know the Excat BUG that your code is hitting ,please contact TAC.
Thanks-
Afroz
**Ratings Encourages Contributors **** -
Hi folks,
how many Catalyst C3KX-NM-10G modules can in install in a 3750X switch. Can it take 2 modules giving me 4 10G Ports ?
Thanks,
SHi,
You can only install one module which is equal to 2 10Gig interfaces. There is not space for a second module.
HTH -
Problem to Up port gi 1/1/1 C3KX-NM-1G cisco 3750
Hi.
This is my problem, I have one cisco 3750x with 24 ports and one C3KX-NM-1G module.
when I connect one gbic sfp-lx in the gi 1/1/1 the port doesnt up.
But when I connect the fiber to another switch the link works.
There are problems with this kind of modules?
regards.When I connect the fiber to the port module (C3KX-NM-1G) gi 1/1/1 the port doesnt work, and the led are off.
this is the sho interface gi 1/1/1
GigabitEthernet1/1/1 is down, line protocol is down (notconnect)
Hardware is Gigabit Ethernet, address is 4055.39a8.eb9b (bia 4055.39a8.eb9b)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex, Auto-speed, link type is auto, media type is 1000BaseLX SFP
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
And the gebic (glc-lh-sm) is connected and works with other switch. -
Good afternoon,
I've put a C3KX-NM-1G module into a 3750x but can only get ports 1,3 to stand up, ports 2 and 4 dont operate.
ports 2,4 are not shutdown and dont come up with working SFPs etc in another switch.Can you please post the following output:
1. sh version;
2. sh log;
3. sh inventory -
Hi,
I have a customer who is having 3750X Switch with IP Base Image.They are planning to add a new switch and these two switches will be stacked.
Could you please recommend a cost effective switch that can be stacked with existing 3750X Switch(IP Base Image).And also what all modules i need to add other than stacking cable?
RegardsDisclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Do i need to order network module (C3KX-NM-1G) to stack two 3750X Switch other than stacking cable?
No. The network module, in the -X series, it to allow differ uplink ports.
What you might need to order it a stacking cable of a longer length. From Cisco, stacking cables come in three lengths. Don't know if still true, but it used to be, I believe, that a 3750 would come standard with the shortest stacking cable which is long enough to go between nearby units when physically stacked vertically together. In larger physically stacks, you would often need to order the longer cable to go between top and bottom stack units. -
ISE CWA with COA not work on 3750X.
Hello.
I use ISE version 1.2.0.899 this patch number 4. I configure Central Web Auth for wired client. In first time client open web brouser, and ISE redirect him to guest portal. User input correct credentionals, and after that switch ignor CoA packet. In ISE logs "5417 Dynamic Authorization failed". If I use domain computer, authentification succecful whis use dot1x. All on Port g1/0/1. I use 3750X this version IOS 15.0(2)SE2, 15.0(2)SE4, 15.0(2)SE5, 15.2(1). On all of this version ios I have this mistake.
Config:
3750X-ISE# sh running-configBuilding configuration...Current configuration : 9575 bytes!! No configuration change since last restart! NVRAM config last updated at 01:29:01 GMT Wed Mar 30 2011!version 15.0no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname 3750X-ISE!boot-start-markerboot-end-marker!!!username admin privilege 15 secret 5 ----username radius-test secret 5 -----aaa new-model!!aaa group server radius end!aaa group server radius ise server name ise3 server name ise4!aaa authentication login default localaaa authentication login CON noneaaa authentication enable default noneaaa authentication dot1x default group radiusaaa authorization network default group radiusaaa authorization network ise group radiusaaa accounting dot1x default start-stop group radius!!!!!aaa server radius dynamic-author client 192.168.102.53 server-key P@ssw0rd client 192.168.102.54 server-key P@ssw0rd client 192.168.102.51 server-key P@ssw0rd client 192.168.102.52 server-key P@ssw0rd server-key P@ssw0rd!aaa session-id commonclock timezone GMT 0 0switch 1 provision ws-c3750x-24psystem mtu routing 1500ip routing!!ip dhcp snooping vlan 701-710ip dhcp snoopingip domain-name com.ruip device trackingvtp mode transparent!!device-sensor filter-list dhcp list DHCP-LIST option name host-name option name default-tcp-ttl option name requested-address option name parameter-request-list option name class-identifier option name client-identifier option name client-fqdn!device-sensor filter-list cdp list CDP-LIST tlv name device-name tlv name address-type tlv name version-type tlv name platform-type tlv name power-type tlv name external-port-id-typedevice-sensor filter-spec dhcp include list DHCP-LISTdevice-sensor filter-spec cdp include list CDP-LISTdevice-sensor accountingdevice-sensor notify all-changes!license boot level ipservices!!!dot1x system-auth-control!spanning-tree mode rapid-pvstspanning-tree extend system-id!!!!!!!!!vlan internal allocation policy ascending!!vlan 102!vlan 701 name ISE-network1!!lldp run!!!!!!!!!!no macro auto monitor!interface FastEthernet0 no ip address no ip route-cache shutdown!interface GigabitEthernet1/0/1 switchport access vlan 701 switchport mode access switchport nonegotiate authentication event fail action next-method authentication open authentication order dot1x mab authentication priority dot1x mab authentication port-control auto mab snmp trap mac-notification change added snmp trap mac-notification change removed dot1x pae authenticator spanning-tree portfast!interface Vlan102 ip address 192.168.102.60 255.255.255.0!interface Vlan701 ip address 192.168.107.1 255.255.255.240 ip helper-address 192.168.102.50 ip helper-address 192.168.102.53!ip http serverip http secure-server!ip route 0.0.0.0 0.0.0.0 192.168.102.1!ip access-list extended ACL-WEBAUTH-REDIRECT deny udp any any eq domain deny tcp any host 192.168.102.51 deny tcp any host 192.168.102.52 deny tcp any host 192.168.102.53 deny tcp any host 192.168.102.54 permit tcp any any eq www permit tcp any any eq 443!!!snmp-server community test ROsnmp-server community test2 RWsnmp-server trap-source Vlan102snmp-server source-interface informs Vlan102snmp-server enable traps snmp linkdown linkupsnmp-server enable traps mac-notification change movesnmp-server host 192.168.102.53 version 2c test2!radius-server attribute 6 on-for-login-authradius-server attribute 8 include-in-access-reqradius-server attribute 25 access-request includeradius-server dead-criteria time 5 tries 3radius-server host 192.168.102.53 auth-port 1812 acct-port 1813radius-server host 192.168.102.54 auth-port 1812 acct-port 1813radius-server host 192.168.102.54 key P@ssw0rdradius-server host 192.168.102.53 pac key P@ssw0rdradius-server key P@ssw0rd!!!line con 0 login authentication CONline vty 0 4 exec-timeout 60 0line vty 5 15 exec-timeout 60 0!ntp master 5ntp server 198.123.30.132 prefermac address-table notification changemac address-table notification mac-moveend
Please, help me.Use these Cisco IOS commands to monitor and troubleshoot CoA functionality on the switch:
•debug radius
•debug aaa coa
•debug aaa pod
•debug aaa subsys
•debug cmdhd [detail | error | events]
•show aaa attributes protocol radius -
CoA issues between ISE and 3750x
We are having an issue using the cisco ise 1.1.2 and a 3750x (Version 12.2(58)SE2)
When the radius sends a reauthentication CoA message to the switch, the switch responds with a 'session contect not found' reply. I have upgraded the code to the latest levels on both the ise and switch and still have the same resultts.
This reauthenticate is needed after the NAC profiler determines the pc is complient. I am receiving the complient message from the pc and switch, but becuase the switch never reauthentices the client after the CoA request, the client is never granted full access.
I am not sure if the radius server is sending the wrong session id, or if the switch is looking at it wrong.
Please Help...!!!!!
-Debug --
Log Buffer (10000 bytes):
Feb 28 19:34:21.940 UTC: RADIUS: COA received from id 38 10.122.1.82:40171, CoA Request, len 140
Feb 28 19:34:21.940 UTC: COA: 10.122.1.82 request queued
Feb 28 19:34:21.940 UTC: RADIUS: authenticator 62 6B 15 C9 C7 A5 CA 88 - 4F B2 EE 4C A0 3D 9F 50
Feb 28 19:34:21.948 UTC: RADIUS: NAS-IP-Address [4] 6 10.122.1.66
Feb 28 19:34:21.948 UTC: RADIUS: Event-Timestamp [55] 6 1362080061
Feb 28 19:34:21.948 UTC: RADIUS: Message-Authenticato[80] 18
Feb 28 19:34:21.948 UTC: RADIUS: BC B3 BA 2A 11 BD 63 0B 22 7E 82 AA C2 A5 F7 C4 [ *c"~]
Feb 28 19:34:21.948 UTC: RADIUS: Vendor, Cisco [26] 41
Feb 28 19:34:21.948 UTC: RADIUS: Cisco AVpair [1] 35 "subscriber:command=reauthenticate"
Feb 28 19:34:21.948 UTC: RADIUS: Vendor, Cisco [26] 49
Feb 28 19:34:21.948 UTC: RADIUS: Cisco AVpair [1] 43 "audit-session-id=0A7A014200000272048AF0F1"
Feb 28 19:34:21.948 UTC: COA: Message Authenticator decode passed
Feb 28 19:34:21.948 UTC: ++++++ CoA Attribute List ++++++
Feb 28 19:34:21.948 UTC: 07353140 0 00000001 nas-ip-address(585) 4 10.122.1.66
Feb 28 19:34:21.948 UTC: 0735375C 0 00000001 Event-Timestamp(430) 4 1362080061(512FB13D)
Feb 28 19:34:21.948 UTC: 0735376C 0 00000009 audit-session-id(794) 24 0A7A014200000272048AF0F1
Feb 28 19:34:21.948 UTC: 0735377C 0 00000009 ssg-command-code(475) 1 32
Feb 28 19:34:21.948 UTC:
Feb 28 19:34:21.957 UTC: AUTH-EVENT: auth_mgr_ch_search_record - Search record in IDC db failed
Feb 28 19:34:21.957 UTC: RADIUS/ENCODE(00000000):Orig. component type = Invalid
Feb 28 19:34:21.957 UTC: RADIUS(00000000): sending
Feb 28 19:34:21.957 UTC: RADIUS(00000000): Send CoA Nack Response to 10.122.1.82:40171 id 38, len 62
Feb 28 19:34:21.957 UTC: RADIUS: authenticator DF 18 2F 59 21 4F 84 E1 - 61 B8 43 B8 01 C5 58 B4
Feb 28 19:34:21.957 UTC: RADIUS: Reply-Message [18] 18
Feb 28 19:34:21.957 UTC: RADIUS: 4E 6F 20 76 61 6C 69 64 20 53 65 73 73 69 6F 6E [ No valid Session]
Feb 28 19:34:21.957 UTC: RADIUS: Dynamic-Author-Error[101] 6 Session Context Not Found [503]
Feb 28 19:34:21.957 UTC: RADIUS: Message-Authenticato[80] 18
Feb 28 19:34:21.957 UTC: RADIUS: 30 C9 AE 52 80 2E A2 54 FF F3 4B C7 28 31 A9 61 [ 0R.TK(1a]
ESWHQFL02-S#
ESWHQFL02-S#
-- Switch Config -
aaa authentication login default group tacacs+ local-case
aaa authentication login local_login local
aaa authentication enable default group tacacs+ enable
aaa authentication dot1x default group radius
aaa authorization exec default group tacacs+ local
aaa authorization commands 5 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa authorization network default group radius
aaa authorization network auth-list group DOT1X
aaa accounting dot1x default start-stop group radius
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 5 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa server radius dynamic-author
client 10.122.1.82 server-key 7 14141B180F0B
client 10.122.1.80 server-key 7 045802150C2E
aaa session-id common
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server host 10.122.1.82 auth-port 1812 acct-port 1813 key 7 13061E010803
radius-server host 10.122.1.80 auth-port 1812 acct-port 1813 key 7 104D000A0618
radius-server deadtime 5
radius-server key 7 030752180500
radius-server vsa send accounting
radius-server vsa send authenticationAs per the cisco recommendation IOSv12.2(52)SE is suitable for Catalyst 3750-X which will support all the features without any issues like MAB,802.1X,CWA,LWA,COA,VLAN,DACL,SAG as mentioned in the link below:
http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html.
I see you are using IOSv12.2(58)SE2,which is not recommended.So you can downgrade to IOSv12.2(52)SE which will solve your issues.
Maybe you are looking for
-
Problem with display of a character (value 65533)
Hi all, sorry for my english but i don't speak it very well. I have a big problem with the visualization of a character. I have a binary text that i have to analyze with java. With my utility all works fine, but when i get the character (binary 81)
-
PLW NTR prints one page, then a blank, and stops
I have a dependable 18 year old Personal Laserwriter NTR printer which has been running with a Dell running Windows XP for a couple of years. The printer is connected via a parallel cable to the computer. The printer has suddenly started printing onl
-
hi all, I want to save the structure of a table in a file can i save it?
-
hi all, as this.menu_mc.about_btn.onRelease = function() { gotoAndStop("about"); plays or stop the playhead on the frame labeled "about" on the main timeline, but on stage i have a mc, (content_mc) and on clicking a button i want to play the playhead
-
Hi Could someone please advise on how to make safari fit the whole screen or make it larger than its default size when it opens. Any advise would be greatly received as i am a newbie to the macbook and have only been a convert for 24 hrs.