C40 audio settings keep changing

I have had this happen 3 times now and its driving me nuts. It occurs about once a month, long enough that nothing is stored in the log files.
Some how the Mic 1 & 2 inputs keep getting switched from line level to mic level. After the first time I upgraded to 7.2.1 and after the second time I factory reset.
The system is password protected, registered to CUCM and managed by TMS. Nothing out of the ordinary.
Has anyone else seen this occur before? I have other C40s and none of them have ever done this. Only this one unit.

Do you perhaps have a configuration template defined in TMS (or CUCM) that is getting pushed out regularly (or even by someone manually) to the device?
Or, if you don't, you could use one to try to fix it on a regular basis. While not a solution to the actual cause of the issue, it could help with your frustration.
Similar to all your other C40s, none of the ones I have experience this issue, so, other than a template, or it not keeping its settings following a power outage (possibly faulty unit), I can't think of much that will cause this behaviour.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Similar Messages

Flash Player preference settings keep changing

Under System Preferences, my Flash Player settings keep changing every so often (every few weeks or so), in the Storage, Camera and Mic and Playback tabs.
I have all three tabs set to Block and the settings change to Allow or Ask me.
Why is this happening and what can I do to stop it?
Thanks in advance for any help.

This solved my problem partially, all I want is that Firefox keeps my Flash saves while I clear the history log.
Your way works too, now, instead of clearing the history log through the browser, I use CCleaner.

Font settings keep changing when I restart Mail

I've noticed over the past few days that whenever I restart Mail, my font settings keep changing, so I have to keep going back in and adjusting them.
Anyone else having this problem, or know how to fix it?
I did a search in this forum, but didn't see anything about this.
Thanks!

I should clarify that this happens after I restart my computer, then open Mail. If I close Mail, then reopen it, without restarting, then this does not happen.

MSI VOX Audio default settings keep changing on startup

I've had this VOX tuner for about a year and a half and I've used it on 2000, XP SP1, SP2, etc...and I've fought with it every single time I reconfigure the O/S. I am a computer support professional - I know a couple of things about drivers, registry file, etc...and I STILL can't get this thing to work consistently!
Anyway, when I install the drivers and MSIPVS software, it always selects the MIDI synth input instead of Line In as the default audio input setting. I reconfigure MSIPVS and tell it to use Line In instead - everything works fine. Then I exit and restart MSIPVS - it goes back to MIDI and I have to reconfigure the audio to use Line In every single time I run the software. Of course, that means the recording doesn't work - because as soon as I click on record, it sets the audio default back to MIDI synth again. I've used two different audio cards with this and they all do the same thing (SoundBlaster Live! value and a SoundBlaster Audigy 2). I've used several different motherboards - I've completely replaced all components in my computer several times and I always have this same problem.
I've got an internal MSI TV tuner card on another machine running this same software - it has the same problem. It won't exit half the time (the window closes but you can still hear the audio running until you restart the computer).
The hardware seems fine, but the software is unbearably poor! I'd drop the software in a second if I could find something else that works better.
The weird thing is that in uninstalling, reinstalling, cleaning out the registry, fiddling endlessly -once in a while I can actually get it to work, but I have no idea what I've done to make this work twice in a row. I've reinstalled the software dozens of times now, reinstalled Windows...I don't know what else to try.
Obviously, I've upgraded all audio and video drivers - none of that makes any difference.
If I open the SoundBlaster mixer program, as I start the MSIPVS program, I can see the MIDI and Line In channels get muted and un-muted but by the time the software loads, it's defaulted back to MIDI Synth again.
Anybody have ANY ideas? I'm desperate to try anythig now. I'm considering throwing the whole thing out and getting an ATI tuner or something completely different - as long as it doesn't use this Intervideo software...
Thanks.
Oh yeah...one more thing I've noticed is that the WinCinema Manager causes all kinds of problems - if this program is running, the channel keeps changing to 1, 11, or 111 - it seems to be sending some kind of remote control signals to change the channels so I've had to disable this program - then the channels seem to work fine (but maybe it's causing my audio problems...?)

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Also check Smart Connect if you have any event enabled that can change settings.
When it comes to the keyboard, in some cases, the keyboard can be changed back to the default keyboard when you update the selected keyboard app from Google Play.
What are your thoughts about this forum? Let us know by doing this short survey.

My notification settings keep changing on my exchange email account.

For some reason, the notification settings on my work email account keep getting changed without my knowledge. I have it setup to alert me with a banner, in the notification center and on the lock screen. However, twice in the last 5 weeks this has changed so I only have the badge app icon, no other notifications.
How can these settings just change like that, and how do I keep them consistent going forward?
Thanks.

For some reason, the notification settings on my work email account keep getting changed without my knowledge. I have it setup to alert me with a banner, in the notification center and on the lock screen. However, twice in the last 5 weeks this has changed so I only have the badge app icon, no other notifications.
How can these settings just change like that, and how do I keep them consistent going forward?
Thanks.

Service settings keep changing?????

I have digital voice and someone keeps changing my settings on the services I have. Is this your programmers or someone who is making changes?
Example: I have simultaneous ring turned on for my home office line and somehow it keeps getting turned off without me logging in.
Please fix this or I will have to seek better service.

If you have invested a lot of money into your computer system etc, I suggest that you take it to a dealer like Comp USA, Best Buy, C.City etc. It’s possible that you have many issues affecting your computer operation.
To my knowledge there are no known issues with Itunes that causes the problem's you mention!
I don’t think this is the best forum or Itunes catagory to resolve what could be complex computer problems.
That’s why when you purchase the computer you should have a warranty and or Technical Support included for issues you may have.
The reason I mention Virus is because you have to start somewhere, and with the little info you gave out, that’s where I thought you should start.
To Contact Apple Tech-Support call – 1800-275-2273. Good Luck!!!
Compaq PC / 1GB Ipod Nano & 80GB Video Windows XP Pent 2.53 GHZ 512MHZ MB RAM 120GB HD

SB settings keep changing: solut

Ive figured out that when my THX settings for SB Audiligy 2ZS Platinum were continously reverting to default after I set it.......... That it wouldnt accept my own customized settings for Speaker Calibration. If you use the arrow buttons more/less to adjust the settings......it stays and doesnt keep changing...the only problem is that you can't have the exact settings you want........the arrow buttons change the values in increments....So the only thing you can do.. is have it set to the closest increment to the value you want. Also the surround mixer settings will get set to the closet preset increment to the value chosen. For example... I set the bass to 45%.....the closest preset, it seems, is 43% so it stays at 43 and doesnt keep changing after that. All these complications are awfully crazy and annoying for a card that costs $00+. It's weird because my previous SB Li've! card did not have any of these issues. Feel free to add to this post with any experiences, tips, tweaks you may have encountered with this definitely problematic card. It would be great if Creative could come up with a fix for all these quirks in their software. I ve tried everything to solve these problems including the recommended Cleansweep procedure.

its got nothing to do with that its the poorly programmed software.
You will have to hope and pray for a fix, but be prepared to wait possibly 4 years + , look for a fix for the bass redirection issue fix that has been a long awaited fix.
Message Edited by 00db on 0-29-2005 08:38 PM

Table Format order and visibility in Form Settings keeps changing

Dear Experts,
We are facing a concurrent problem where there is constant change in the table format of the form settings in marketing documents.
The columns order keeps changing and also the visibility box which will be ticked, becomes again unticked the next day for particular columns which are used.
Event though it is set one time in manager login and locked the doc settings for other end users. The format keeps changing.
It has to be set dially manually. Is there a permanent solution for it .
Please let me know . Please find the attached pic for it.Its SAP B1 8.82 PL6

Hi,
Please check this thread:
http://scn.sap.com/message/7377186#7377186
Check SAP note for changing form settings:
1062635 - Can I block a user from having access to Form
Settings?
Thanks & Regards,
Nagarajan

Settings keep changing themselves

Minor settings keep tweaking themselves, such as I will make the podcast app "oldest to newest" however anytime I go out of the app then back in it becomes newest to oldest, and sometimes completely ignores my setting all together. I've got newest stuff on top. I suppose the simple solution would be to simply live with it. However its other settings as well, like the music app, it keeps going to the artist search screen sometimes while I'm trying to scroll down an album I am listening to. It's very annoying, is there something I can do to fix this?

That is a well know bug. I'm not sure of what the logic behind this procedure, but actual responses from users who tried it confirm that it works. Please switch your status to offline for at least a minute, then switch back to online. Then change your privacy settings to see if they will stick this time.
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

My Safari v5.0.5cookie settings keep changing

My Safari Cookie setting keep changing randomly it seems, I set them to (Only site I visit) look back later and they will have changed to one of the other settings, I have tried trashing the safari pref file and it still happens, anyone else seeing this behaviour?

You might like Safari Cookies manager.
http://www.apple.com/downloads/macosx/internet_utilities/safaricookies.html

My settings keep changing

Hello,
every time i open my firefox, the settings have change. Specifically, the startup page: it starts up where i left off, even tough i don't want this. I want google as my startup page, and it keeps changing this. I already updated to the latest version, but this problem still continues. Please help!
Kind regards,
Brooke Weise

I think the saved settings in user.js overrides your settings
Here is what you can do
Note that there shouldn't be numbered sessionstore-##.js files in the Firefox profile folder, so best is to remove all those numbered files.
http://kb.mozillazine.org/Multiple_profile_files_created
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
Do NOT click the Reset button on the Safe Mode start window.
https://support.mozilla.org/kb/Safe+Mode
https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with preferences.
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
http://kb.mozillazine.org/Preferences_not_saved
http://kb.mozillazine.org/Resetting_preferences

Audio settings keep reverting to the built in audio!

The audio settings will not save the particular driver settings
We are changing the audio driver from the built-in audio to the pci-424 driver, which works ok, apply changes again ok. Eveyrthing works ok. So you quit the program and relaunch and the driver reverts back to built in audio! Ok so maybe saving the project with those settings will work, nope that doesnt either! I have stripped out all the preference files, still didnt work. Removed the application and reinstalled, nope still the same! Im running logic 8 on another Macpro with a different motu interface and this doesnt have the same problem, any suggestions!!

Well it seems its related to this particular hardware. Tried installing on a machine which has been retaining the settings ok and the same thing happens, most annoying!

'Ringing' Audio Settings keeps reverting

Apologies if this has been asked before. I was unable to find an existing topic on this subject.
The issue is that even though I set the 'Ringing' setting under Audio Settings to "Speakers", it always reverts to "Use Selected Speaker" when Skype starts up (after logging in to Windows). This results in Skype ringing into my headset, which means I never hear it ring.
Both the 'Microphone' and 'Speakers' settings are set to my Logitech headset, but I want Skype to ring on my Realtek HD Audio device, which is where my speakers are connected.
The only thing I can think is that Skype is somehow starting up before the Realtek device is ready so Skype doesn't even see it and then reverts to a default value of "Use Selected Speakers".
Anyone else experiencing this or have any solutions?
Attachments:
2014-12-10_21-09-47.png ‏26 KB

I am able to reliably reproduce this now. It seems that I was on the right track. It happens when I remote desktop into the machine that's running Skype. When I'm remoted into the machine, only "Use selected speaker" and "Remote Audio" show up. This is why it is reverting to "Use Selected Speaker" because the Realtek audio device is non-existent when I'm using RDP.
Have at it, devs.
Attachments:
2015-02-19_11-38-54.png ‏32 KB

Outlook 2010 View settings keep changing/resetting

View keeps restting to defaults. I change it to 'Single' rows, colums, and preview to 12pt, no grouping ascending date sort.
I also change the calendar to month view.
All keeps resetting.
I tried Outlook /cleanviews
and all that does is reset everything again.
Is there a way to export all my settings, so that I can easily reset them? Maybe an addin?
No idea what is causing this behaviour.
Windows Ultimate x64
Rick Hantz

Hi,
A view is a hidden message in your PST file. Try to repair your PST file using scanpst.exe:
Click Start, and then point to Find or to
Search, depending upon your operating system.
In the Search for files or folders named box, type scanpst.exe
Double click the Scanpst.exe file to open the Inbox Repair Tool.
Type the path and the file name of the personal folders (.pst) file or click
Browse to locate the file by using the Windows file system.
Click Start.
If the problem persists, we may try to create a new PST file. When creating a new Outlook profile, a new pst is created for Inbox. So, create a new Outlook profile
to test the results. For detailed steps, refer to:
http://support.microsoft.com/kb/829918
Sincerely
Harry

Privacy Settings Keep Changing Themselves

I recently discovered that my privacy settings had been changed, and I don't know how. I keep trying to set it so only my contacts can call me, but the second I hit the "save" button, it reverts back to "anyone." Same with the messaging. If one more person with a username like "Hard **bleep**" or "suckmeoff" messages or calls me trying to get me to have video sex with them, I'm going to kill something.

That is a well know bug. I'm not sure of what the logic behind this procedure, but actual responses from users who tried it confirm that it works. Please switch your status to offline for at least a minute, then switch back to online. Then change your privacy settings to see if they will stick this time.
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

C40 audio settings keep changing

Similar Messages

Maybe you are looking for