C410 printer stuck in a error loop

has anyone else had an issue with a c410 getting stuck in a error loop?  It asks me to "please turn printer off and the on" and as soon as I turn it off it comes right back on with this same message on the display.  Any help would be greatly appreciated.

Hi,
I found this link about power issues which may help your situation:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01368841&tmp_task=solveCategory&lc=en&dlc=en&cc...
Hope it works.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Similar Messages

  • Stuck in 'Disk Error' loop of eternal darkness

    Hi everyone
    I made a mistake during Boot Camp Assistant's install of XP on my Intel Mac Mini by not formatting the Windows partition correctly. So I then saw the 'Disk Error' black screen described often by other users on this forum. Now I think I know what to do (access Startup Manager, reboot from Mac and start XP installation over, formatting the partition correctly this time) but here's the thing - I can't get into Startup Manager.
    I've tried holding down Option key before power up, just after power up and after the chime about 20 times but I still can't access Startup Manager. After some whirring, the Mac boots into the black 'Disk Error' screen saying 'Press any key to restart'. For info, the disc drive is empty (I removed the XP CD manually) and I'm using a wired Apple keyboard. What am I doing wrong? Any suggestions to get me out of this loop would be greatly appreciated - thanks for reading.

    You might also be able to boot into Mac OS X then use the Bootcamp assistant to start the installation process over again.

  • I have an iPhone 4 that is stuck in a recovery loop. i try to restore it but it comes up with an error code (-1) towards the end of the restore. can someone please help me?

    i have an iPhone 4 that is stuck in a recovery loop. i try to restore it but it comes up with an error code (-1) towards the end of the restore. can someone please help me?

    i just baught it off someone.. so im unsure if it was jailbroken or not.. and i dont think its under warranty now.
    is there a software or something along those lines that would indicate what peice of hardware is faulty?
    i baught it in this recovery loop thinking it was going to be a cheap way of getting a new phone without having to do much.. but now im starting to think its a brick

  • Hello i have an iphone 4 its stuck in the apple loop. when ever i unplug it from the computer it shuts down and when i plug it in it shows me on itunes its in recovery mood and every time i click restore i get this error the iPhone could not be restored.

    hello i have an iphone 4 its stuck in the apple loop. when ever i unplug it from the computer it shuts down and when i plug it in it shows me on itunes its in recovery mood and every time i click restore i get this error the iPhone could not be restored.an unknown error accurred (2001)

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

  • Facebook and add-on page does not open stuck in a infinet loop

    I am able to use other ssl enabled sites like gmail from Firefox, but when I try to login to Facebook after the first page, It does not open. Have tried all the troubleshooting steps suggested for Facebook errors and https errors, no luck.
    I get stuck in an infinite loop on the next page. This is the security page which asks to setup a machine name.. (https://www.facebook.com/loginnotify/setup_machine.php?next)
    Please note there is no error displayed, the page just loops endlessly and does not display the Box which should ask me to set the device name for Facebook.
    The same thing happens when I try the Add -ons page via the Tools menu. I am able to use Facebook in Chrome on the same system system.
    Willing to work with the community to resolve this. Can also provide Wire shark dumps if required. Thank you for your time. Hope this gets resolved soon.

    Hi Matthew,
    Thank you for your question, I am sorry of the challenge as you have been at it for a while. [https://support.mozilla.org/en-US/questions/988977] pazos comment had a particular step to clear the cache after applying the update. I followed the mozilla hacks comments as well and saw you were in a loop after
    There was a follow up redit post that was successful from updating to 1.0, then to 1.1 with the update.zip then to 1.2 [http://www.reddit.com/r/FireFoxOS/comments/1xvq2w/how_i_got_12_working_on_zte_open/]
    Did these instructions help?

  • My ipod nano 7th generation is stuck in a restore loop with a white screen. Now it won't turn on anymore. What to do?

    My new Ipod Nano 7th generation is stuck in a restore loop. Here is what happened: I added music to it using the latest version of iTunes, the colored bar at the bottom of the summary tab in iTunes showed my that I added it and I disconnected it to listen to the music. As I turned it on, it told me that there is neither music nor pictures on it. So I connected it again to my computer and iTunes told me that I had to restore. Which I did following all the steps but it keep telling me that I need to restore it. After three times of restore it, I disconnected it from my PC and turned it off. Now it won't turn on anymore - even though the battery is fully charged - and when I connect it to iTunes, iTunes tell me "The iPod software updater could not be contacted. The server does not support this version of iTunes." Well, I just downloaded the newest version a couple of minutes ago from the apple website. My iPod stays black. What shall I do?

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

  • Windows recovery error loop (HP Pavilion dvd-1132us)

    My Pavilion (originally running Vista, changed to Windows 7) was working fine, and then stopped loading Windows. It starts up fine, then a black screen comes up with this message: Windows failed to start. A recent hardware or software change might be the cause." Then it offers me the option of Launch Startup Repair or Start Windows Normally. If I choose Launch Startup Repair, the blue WIndows screen comes up, then the Startup Repair window reads, "Startup Repair cannot repair this computer automatically", and the subsequent repair tools offered don't do anything. I try System Recovery Options, particularly the Windows Memory Diagnostic Tool, and then I got a  "c000021a Fatal System Error" message. What can I do? Is my laptop stone cold dead?

    Hi there @zivvie 
    Welcome to the HP Support Forums!
    I understand that your notebook is stuck in a recovery loop. DId that error message only appear in the test you mention or have you seen it regularly?
    Did you backup any data on your hard drive before changing the operating system?
    If you have and if you have not removed the existing recovery partition, then you can try this, and if you run into trouble check out the troubleshooting page.
    Performing an HP System Recovery (Windows 7)
    Troubleshooting HP System Recovery Problems (Windows 7)
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • HT1199 Why is mail stuck in a do-loop of "There is a problem" with the mail account after changing iCloud password?  How can it be fixed?

    After changing passwords for iCloud, Mail is stuck in a do-loop "There is a [problem..."  The error appears in less than one second after responding "Later"

    Nope.  Turns out that even though I have two Macs running 10.9.4, the one in question doesn't get the SMTP settings changed by iCloud settings when the password is changed, so I had to "Edit" the account in Mail, plow down to the password settings for the Apple SMTP server, and change the password myself.  Nothing in the System Preferences iCloud setting tab lets you change any settings on the local machine.  Apple is sure they are controlling everything when you make changes in iCloud, but they are wrong.  Identical versions of 10.9.4 are configured differently on two different Macs.

  • Igxprd 32, device driver stuck in an infinite loop

    Just attempted to reset a hard drive on our T61 to its factory settings (Windows XP) using the "Recovery CD Set"  (rescue and recovery cd, supplemental product recover cd, and 6 product recovery cd's).  During the final step, the computer reboots itself; however, Windows can't load.  I keep getting an error on a small blue screen, referencing a problem with "igxprd32" and that the device driver got stuck in an infinite loop.  How can I fix this issue.  (Product ID 6465CT0)  Thank you!

    Kindly try to boot the system into Safe mode and then uninstall the display driver.
    After this you should able too boot the system into normal mode. Download the latest driver from lenovo website
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ld152ww.exe
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Weird repairing disk error loop

    My computer seems to be to be stuck in the "repairing disk error" loop though, unlike in most people cases, mine does not end up to the blue screen. Ive left it on hoping it would give me the option but its been 2 days already and its just repeats
    the usual statements everyone gets before the blue screen occurs. Could someone please help find a resolution to this. Much appreciated.

    They'll help you over here.
    Windows forums on Microsoft Answers
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • HELP! My iPod Touch 4g is stuck in a restore loop!

    Help!
    My iPod touch 4g is stuck in a restore loop and I dont know why! Its jailbroken and i got fed up of it so i decided to restore it. It didnt work. It came up with error 21 and then i tried to restore it in dfu mode and it came up with error 1600. I took it into the apple store and they said they would have to make an appointment to try it... I dont really want to do that becuase i cant live without it!
    I have tried everything to get it out! Rec boot, iReb and redsn0w and its not working
    My iPod is 4 years old by the way
    Also im a mac user
    If somone out there could be an absolute star and help me with it i would be insanely grateful!

    You can try 2 things:
    Restart your iPod by - Holding the Power and Home buttons until you see the Apple logo.
    Put your iPod in DFU and restore - Hold the Power and Home until the screen goes black, wait about 2 seconds, release the power button but keep holding the home for 15 seconds, then on iTunes, Restore and Update.

  • TS3694 Hi all I think my iphone 4 is stuck in a recovery loop and I dont know what to do

    Hello my iphone seems to be stuck in a recovery loop and I dont know how to deal with it, so far I have tried to do an update and restore and right at the end of the restore a box appeared and said it cant be restored due to unknown error 21 which I be;lieve is a hardware problem. I would be greatfull for a solution to this problem is I have no access to the phone because of this loop
    thanks all
    Donald

    Hi there donaldkm1,
    You may find the troubleshooting steps in the article below helpful.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    -Griff W. 

  • Need help plz my iphone is stuck in a reboot loop

    my iphone is stuck in a reboot loop i cant get it to stop itunes dose not detect
    my iphone so i can restore it i don't know what to do plz help

    I am experiencing the same problem, and i have attempted NO jailbreak or other iphone hacked software. My screen will slowly fade to white, and then go into an endless reboot cycle, or just glow bright white til the battery dies. I have tried restoring with itunes via recovery, and i receive error (2003).
    (EDIT)
    I successfully restored my iphone, and it worked GREAT! until i removed it from the cradle, and my screen jumped straight to apple logo, descending into the bottomless pit of reboot cycles.
    Message was edited by: detri

  • Stuck in auto repair loop.

    Attempted to wake desktop running Windows 8.1 Pro (after typical MS update time Tuesday).
    Computer would not load Windows, stuck in automatic repair loop.
    Boot disk is 120GB SSD.
    Created Recovery USB from good Windows 8.1 laptop.
    Used diskpart and list vol to get:
    Volume 0 C
    System Rese NTFS
    Partition 350MB
    Healthy
    Volume 1 F
    RAW Partition
    111GB Healthy
    Volume 2 D
    3TB NTFS
    Partition 2794GB
    Healthy
    Volume 3 E
    RECOVERY FAT32
    Removable 14GB
    Healthy
    Exited diskpart
    Ran:  chkdsk /r /f f:
    Got:
    The type of the file system is NTFS.
    Stage 1: Examining basic file system structure ...
    293120 file records processed.
    File verification completed.
    8135 large file records processed.
    0 bad file records processed.
    Stage 2: Examining file name linkage ...
    Correcting error in index $SDH for file 9.
    An unspecified error occurred (766f6c756d652e63 461)
    If I use the Refresh Your PC option from recovery USB, I get: The drive where Windows is installed is locked. Unlock the drive and try again.

    Update:
    I ran diskpart again, and letters have changed, but boot volume still RAW:
    Volume 0
    F
     System Rese
    NTFS
    Partition
    350MB
    Healthy
    Volume 1
    C
    RAW
    Partition
     111GB
    Healthy
    Volume 2
    D
     3TB
    NTFS
    Partition
    2794GB
    Healthy
    Volume 3
    E
     RECOVERY
    FAT32
    Removable
    14GB
    Healthy

  • My iPod nano 3rd gen is stuck in a restore loop.

    My iPod nano 3rd gen is stuck in a restore loop.  I have wiped it with Disc Utility and attempted to restore with iTunes, but there was no effect. I checked it in diagnostic mode against an identical pod and found no significant differences in the results, both checked out fine.  I know that this is not a windows driver issue since I use a mac.  In any case such an issue should have been resolved when I wiped the pod.  I have not attempted to load any music on it or sync my library, so a corrupted file seems unlikely as well. there is no water damage and the case is in excellent condition.  I have no idea whats wrong with it so any help or suggestions would be appreciated.

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

Maybe you are looking for

  • What's the difference between Routing and Service Callout in ALSB?

    I am puzzled by that. what's the difference between them. Or what's the situation should use Routing, and that of service callout?

  • Language support seems not to work as it used to

    As I recall it used to be that you could turn any version of Project into a foreign one by downloading the language.  I have done this before for example for French, German, and Brazilian Portuguese, I think using project 2010 and Windows 7.  I am no

  • Datasocket returns old data

    I use the datasocket Read VI in LabVIEW to read images off a webpage. I append [text] to get the image back in a string and can then save it to the local harddrive. Trouble is, without reporting an error, the vi will on occasion return the same image

  • RMAN backup in HP Ultrium 3-SCSI(3mn) tape device

    Dear All IS it possible to take online RMAN backup in HP Ultrium 3-SCSI(3mn) tape device? Note: this is not a tape library, a stand alone tape device. Thanks & Regards Quazi Abdur Rab

  • Simple but elusive question

    I have a master/detail form. Upon updating a row in the detail block, I need to update a table which is different from both the master and detail tables. so far the insert and delete operations are working fine (I use post_insert and post_delete), bu