C410 Wireless Printer keeps loosing its connection to my wireless network in Windows 7

HP C410 Photosmart all-in-one wireless printer
on a HP pavilion p6000 Desk top running Windows 7, with all the latest updates
Every 3 or 4 weeks, the printer has to be reinstalled or I connect to the router with an either net cable,
Currently the Desk Top can not find the printer on the net work, I have disabled the firewall, The printer is connected to the net work but I can't print thru the net work. I fixed the issue by using a trouble shooter that said I was missing a driver, but now I can't find the trouble shooter, and the HP trouble shooter is little to no help. I have used HPHNDU, which can't find the printer, but it can find the network, I have also tried HPPIW, and it is of no help. Lastly I have used the HP printer install Wizard and it has me deleting the printer and then it can't find the priner so you click the next button and you delete the printer again, ...
Any assistance will be much appreciated, cause it is now a wired printer.

ITried all the suggestions and downloads and I still have toconnect thru a wire. When the Desktop is performing the Network discovery and check, it says it can't find the Printer on the net work, yet the Network test report has passes in all the categories and the signal strength as excellent, so I guesithastoremain a wired connection. Because the next comment is its windows 7 tha is having the issue. Thanks for the suggestions they did not work...

Similar Messages

My i phone 4 keeps loosing its connection with my Toyota Camry bluetooth-- anyone have any ideas why?

My i phone 4 keeps loosing its connection with my Toyota Camry bluethoth does anyone know what I can do about that?

Ignore the ridiculous post by W1$C. He posts that regardless of the person's question.
Things you can do to solve your problem:
1. General>Settings>Reset Network settings
2. If this is only happening at home, power down your router for a minute, then power it back up.
3. Other basic troubleshooting steps outlined in the user guide are to restart, reset, and restore--first from backup, then if needed as a new device.
Hope this helps.
GDG

My printer keeps losing the connection to my wifi network

I have tried deleting and adding again. Sometimes it works but then it goes down again. I have tried two different printers. I recently changed our wifi to password protected, but I have set it up on the printers and they recognize and connect. It is my computer that cannot find the printer.

Anything is possible but I don't know how I would know that. We have a wirless network that serves my imac, a pc desktop, a laptop, and various mobile devices, as well as the printer. It just seemed to stop working on the network. I downloaded all updates. I am going to remove the wireless printer form the mac for now so that the others can use it. I will hook up a usb printer to the mac. Though that seems so ridiculous. I have tried everything else I can think of.
Is it possible that my modem or router are causing the problem? I just commuication error every time even though the signals and network seem to be performing just fine.

Photosmart wireless B110 printer has lost its connection with my desktop PC.

My Photosmart wireless B110 printer has lost its connection with my desktop PC. I can still print from my laptop so I know the printer is working fine.
When I check ink levels through 'Printer Proerties' the message I get is 'The computer is unable to establish two-way communication with the device', so I guess this is a clue. I would appreciate any help you can give.
THank you.

Just as a preliminary step, we're going to go through a complete and clean uninstallation and reinstallation. First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer (be sure to select your correct OS):
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4022343
Install that and let me know the result!
Have a great day!

RE1000 keeps loosing internet connection

I recently bought the RE1000 extender to improve our network at home.
I'm using the Linksys WRT610N router and Linksys WUSB600N adapters to connect, no encryption or mac filter.
My problem is that the RE1000 extender keeps loosing internet connection, the computers are still connected to the extender with full signal strength but no internet (Network magic icon with red X).
If I disconnect/connect to the wireless network when this happens the computer will connect to the router with only one bar strength.
To fix the problem I must restart the extender, then it works for a couple of days again before internet is lost again.

As you mentioned in your post that if you connect the computer with the router's network it connects with one bar but does it go online? If yes then connect the RE1000 from the Router and check the DHCP client table it will show the RE1000 IP address and then configure the RE1000 again… Here is the link for the configuration of the RE1000…
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=3760&userrole=Linksy...
Wireless settings in RE1000 will be same as router… In order to get the best performance from an RE1000 you need to place the extender in an area where you still have at least 50% signal strength to your router when you place it in the final location where the RE1000 will be used. Once after the configuration of the RE1000 try to connect the wireless laptop and check the connectivity…
Secondly in the DHCP client table the client name shows up with the Device name and not the Wireless Network Name…

Apple tv keeps loosing the connection with the mac

Purchased a new desktop mac, time machine and an apple tv. everything is working splendid however the the apple tv seems to keep loosing the connection with the computer. As I sit here i see its no longer listed on the i tunes as a device, I seem to have to reset to the factory defaults again and re install it. I hope I am wrong and I am missing a step and its there and maybe I just don't know how to access it, So here I am posting this to all, Help.... I will be the first to admit I really am a little lost with this apple tv
thanks you everyone

I have the same problem as you do. i have had my apple tv for about 2 years now. I connect my apple tv to my iMac, via wifi by airport extreme. i used to before connect via ethernet cable to my airport extreme, i still had the same problem as you do. that itunes losses the apple tv. yet, from apple tv i can still access the internet. i have gone through all my settings on my airport, they are all correct. the connection only seems to last a few days then, it just losses connection. i have asked this question before, but now one was able to help. Apple is not interested because apple tv is just a pet project to them. you do not have to rest the apple tv every time, you just need to go to the options menu and select the connected computers and tell it to delete connection to your computer. once it has done that, make a new connection to your computer on itunes put in the new passcode and set up which films etc you want to be sync. We should not have to do this every few days. Apple needs to sort this out or at least lets us know how to stop this.

Ipad 3 keeps loosing wifi connection

My new ipad keeps loosing wifi connection when downloading documents, apps, etc.
When i turn of the wifi and download via the 3G, it works fine. And after switching on wifi again, everything seems good.
Are there anybody that has the same problem with the new ipad?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

I keep loosing internet connection

When I bought my MAC desktop MAC Lion OS X 10,7,5 it was working fine when connected to internet but now I keep loosing the connection. I have to turn off wifi off on to reconnect. It happens often. Very annoying. Can somebody help?

Check thru thsi, you may have to change channels, as there may be some interference on the one your are on.
http://support.apple.com/kb/DL1483

HP LaserJet M1120 MFP will not print on wireless network with Windows 8.1 operating system

The printer worked on the wireless network with Windows 8.
I have been advised that it does not work with windows 8.1 because a driver is required. However this is not available to download.
It is ridiculous that by having the latest operating system I am unable to use the HP printer on the wireless network
When will HP have the driver to download?

Check the support site here.
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-LaserJet-M1120-MFP-will-not-prin...
Make sure you have the firmware update also.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Connecting to Wireless Network Using Windows in Boot Camp

Hello!
I installed Windows on my MacBook Pro, and I know how connect to the internet using Mac OS X, but I have no idea how to connect to my AirPort network in Windows. I know it must be simple, but I just don't know what to do.
Thank you!

I went to Microsoft's site and looked up how to connect to a wireless network. You have to enter the wireless address or something into Internet Explorer.
-Hope this helps!

Group Policy to disable ability to turn off wireless networking in Windows 8.1 Update

I am wanting to disable the ability to turn off wireless networking in our Windows 8.1 Update clients using Group Policy. We are a school that runs classroom management software enabling the teachers to view what the students have on their screens.
Students just switch off their wireless to avoid detection. I have searched the Group Policy listings and can't find anything.
Thanks.

Hi GeoffAUS,
I can’t find a direct group policy to disable the users’ ability to turn off the wireless network in Windows 8.1.
If we just disable the display of wireless connection, we will need to additionally disable the ability that disabling the driver in device manager.
We could try the workaround to use UAC to control the wireless connection.
Go to Computer Configuration->Windows Settings->Security Settings->Local Policy->Security Options, and set the option
User Account Control: Behavior of the elevation prompt for standard users.
Please make sure the computer automatically connect to Wireless.
For more information, please refer to the following article.
http://technet.microsoft.com/en-us/magazine/gg266419.aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Keep loosing keyboard connection

I keep loosing keyboard and somtimes trackpad connection. The light on the keyboard flashes then it connects again. Any ideas. My imac is a 3.06Ghz Core 2 Due running 10.9.1.
Whether its connected or not but occasionally the mac will freeze when in Safari and the only way to start again is to power off. These problems dont happen together and when the keyboard looses connection, the trackpad still works.
Most confusing any help will be much appreciated.

Hi there Rudyumd,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
-Griff W.

Linksys E1200 patch 2.0.05 build 2 Mar 28, 2013 - still keeps loosing Internet connection

Hi Guys,
Anyone with the above issue - suddenly now my internet keeps loosing connectivity.
Is it the ISP fibre issue or the cisco linksys e1200.
Any feedback appreciated.
many thanks in advance
francis

To properly isolate on which device is not working properly is to disconnect the router from the setup and connect your main computer directly to the modem (via Ethernet cable). You can observe the internet connection through the modem for at least 24 hours. If you find that the modem is working fine (stable) then the problem is with the router. So what you can do is reset the router (pressing and holding the button down) for 15 seconds and power it down for also 15 seconds. You re-configure the internet connection on the router after that. Set the wireless settings, too, like change the SSID, set the channel to something else and make sure that wireless security is enabled. You use WPA2 for wireless security on the router.
You can check the links below as well:
Setting up your Linksys wireless-N router without using the setup CD
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22734
Resolving dropping wireless connections
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=4029
Top causes of dropping wireless connection on a Linksys router
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=efc03a44a5bb47bd804cf4d0eb3015c8_Top_Causes_of_Int...

Keep loosing the connection to my 30" display

Hi
I've just bought a MacBook Pro 17" + and adapter to my 30" Apple Cinema Display.
There seems to be an annoying issue however; 3-4 times during a work day I loose the connection to the 30" display. This happens without any prior notice. I don't mess with the cables or anything. Everything is plugged in nicely and securely, and the weirdest thing is that even thought the connection is lost to the screen itself my mouse and keyboard (which are connection through the screen) still works.
I need to unplug the adapter to the mini display port 1-3 times before the connection is reestablished.
3-5 times during the day what also happens is that the screen "blinks" for about 1-2 seconds (goes dark) and then goes on again ... causing me to hold my breath hoping the connection is not lost again
Is this a knows issue? And what to do?
Regards,
Daniel

Can I "change the channel"?
Of course. You would change the channel on the wireless router creating the wireless network. The AX will automatically detect the channel that the wireless network is using.

Imac keeps loosing WIFI connection

Hi all,
I loose wifi connection most of the time (but not all the time) at around 18:00 pm !?!, very strange !
I have no neighbors and no houses close enough to interfere with my wifi.
After loosing connection I do: Syst. Pref - Network - unblock modification with password - Help me - Diagnosis then choose my wifi
and it starts working again for 3 minutes.
Then I loose connection again and have to go through all the previous steps. After 4 or 5 times it's all ok.
What gives ? Can anyone help me please ? Any suggestions ?
I have to use wifi because my ethernet port and firewire ports both stopped working and Apple says I have to take the machine for repair.
Thanks for any help.
OSX 10.9.4

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 5
Reset the System Management Controller.
Step 6
Reset the PRAM.
Step 7
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 8
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

C410 Wireless Printer keeps loosing its connection to my wireless network in Windows 7

Similar Messages

Maybe you are looking for