C410a won't to mac with OSX 10.8 but is accessible from the web server or from older OSX

The c410a has ceased to behave with Mountain Lion.  The newer OS machines can still access via the embedded web server, but no other way.  Older mac running Lion has no issues
Since I recently upgraded Norton on the newer machines, I suspect that may be an issue.
This question was solved.
View Solution.

What router?
Why are you using Norton?  There is no such thing as a Mac virus and until there is....
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • Not able to install Logic on mac with OSX.  10.8.2. Error message: Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported. I have logic studio 8 software purchased in 2007 and upgraded with logic studio 9 (purchased in 2009)

    After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
    What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
    Help!

    Mark,
    Sorry...
    I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
    My apologies and please ingnore those parts of my last post relating to the PPC Macs...
    You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer)  but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
    Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
    You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
    If the Logic Pro App is in your applications folder..
    Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
    Run Logic
    Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
    This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers...

  • I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following -  I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

    Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
    I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
    I am receiving an error problem when doing the following -
    I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
    When processing the Export I receive an error message for each of the images being exported indicating the following -
    Heading Import Results
    Some import operations were not performed
    Could not move a file to requested location. (1)
    then a description of the image with file name
    Box Save As                                  Box  OK
    If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
    To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
    Thanks if you can can help out.

    Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

  • Printer is overprinting old jobs on top of new jobs.  Using a Mac with OSx and a HP photosmart for over a year.  this just started happening.

    Printer is overprinting old jobs on top of new jobs.  Using a Mac with OSx and a HP photosmart for over a year.  this just started happening.

    RReset printing system again and the restart in Safe Mode . This will clear some caches,to do this hold down the Shift key when you hear the startup tone until a progress bar appears, after it has fully booted restart normally and add the printer.

  • How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX?

    How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX?
    There is no HP support for this old printer. I have tried to connect via ethernet (thru ethernet router), and it does not show up in printer preferences. The printer worked fine on system 9x but when I went to my new macs with system X no luck. This is a great B&W printer that prints at 18 x 24". I would like to keep it and not junk it, but its been sitting on my desk unused for some time now. Any thoughts or JUNK IT! Thanks, R.T.

    Does anyone at Apple have help for this sort of question - I too have an old printer (HP LaserJet 5MP) that I would like to keep using on my Mac. (Mac OSX 10.6.8).
    I got it working by getting a USB cord that connects to it - but every once in a while it just stops working for weeks. The mac 'sees' it and it sends the data because the printer lights start blinking but then it just doesn't do anything. Is there no one who can tell me (and raterada) how to get some new life into these old printers. I would rather not add this (and a new toner cart) to the landfill just yet. . .

  • How do I install gimp on my mac with OSX Mountain lion? It says it cant find X11.

    How do I install gimp on my mac with OSX Mountain lion? It says it cant find X11.

    Have a look in your Utilities folder - X11 should be there. Launch it and you'll be offered the option to install.

  • Hello.  I am running Photoshop CC 2014 on a MAC with OSX LION.  I also have Photoshop CS6 installed.  When I double-click on a file in Bridge CC, it always opens in CS6.  If I say "OPEN WITH Photoshop CC 2014", or if I drag the file directly to CC 2014 in

    Hello.  I am running Photoshop CC 2014 on a MAC with OSX LION.  I also have Photoshop CS6 installed.  When I double-click on a file in Bridge CC, it always opens in CS6.  If I say "OPEN WITH Photoshop CC 2014", or if I drag the file directly to CC 2014 in the Dock it will open in CC.  Since I like to double-click or hit return in the bridge, I am constantly having to wait until the file opens in CS6, quit CS6 an then open it another way to get it into Photoshop CC 2014.  I tried to disable CS6 by hiding it, but then double-clicking Bridge did nothing.  Any ideas why this is happening?

    Check and adjust the File Type Associations in the bridge cc preferences.

  • Problems installing Photoshop CS2 on mac with OSX 10.8.3

    I get error message installing Photoshop CS2 on Mac with OSX 10.8.3

    they're not compatible: http://roaringapps.com/apps:table/tags/_a/index_tags/_a

  • Why won't my Mac with Mountain Lion OS recognise my external Samsung hard drive?

    Why won't my Mac with Mountain Lion OS recognise my external Samsung hard drive?

    Launch/Utilities/Terminal and enter this command at the prompt:
    diskutil list
    Press return.
    If it sees the disk, note the number of the disk (far left column) you want to mount.
    Then, enter this command:
    mount /dev/(number of disk)
    Put in the number no parenthesis.
    Press Return.
    If that doesn't wortk try the same with this command...
    mount force /dev/(number of disk)

  • I am installing Adobe Acrobat on a Mac with OSx Mountain Lion - gives me this error DW006 any ideas?

    I am installing Adobe Acrobat on a Mac with OSx Mountain Lion - gives me this error any ideas?
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050: - Acrobat Professional: Install failed

    No there is not enough information in this snipped of your installation log.  Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review the installation log in it's entirety.

  • My mid 2011 mac with OSX 10.7.5 will not mirror with my apple tv. No icon at top of page or in system preferences - advice?

    My mid 2011 mac with OSX 10.7.5 will not mirror with my apple tv. No icon at top of page or in system preferences - advice?

    You need to upgrade the OS, go to the Mac App Store to download Mavericks

  • Attempting to install Lightroom 5 on Mac with OSX ver 10.9.5, keep getting Exit Code 7 error

    I've tried three times to install Lightroom 5 on Mac with OSX ver 10.9.5, keep receiving an error. Exit Code:7. Anyone know a solution to this? I haven't been able to find anything in the forums. I appreciate the assistance.

    Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5

  • Elements 8 and 9 in a Mac with OSX?

    I have and use elements 8 in a Mac with OSX.  Just bought a Wacom tablet that comes with Elements 9.  What will happen if i install the included software bundle - will I have two versions of Elements, or a mess?,

    You will have two versions of Photoshop Elements installed.  Your file associations will also be adjusted so that images open in Elements 9 as opposed to Elements 8.

  • PSE 8  Licensing problem on Mac with OSX 10.8.4

    Hi,
    Trying to edit some Aperture pics with my PSE 8 on my Mac with OSX 10.8.4 the following messge appeared: 
    Then found I could not open PSE independently of Aperture (version 3.4.5) - and kept getting the same message each time.
    Not sure of the current state of my PSE 8 but my Applications Folder shows me the following:
    So far as I am aware my PSE * has been kept fully updated using the Mac's automatic updater.
    I have had this PSE * since new, just after its first appearance and registered it with Adobe immediately.
    It has worked fine but my latest experience may be the first time of use since updating to Mac OSX 10.8.4. Not sure.

    Barbara B,
    Thanks for your response to my cry for help. I do not understand what is going on with this "Licensing has stopped working..." business but I have tried to implement the solutions you offered without any success. My attempts are detailed below:
    Solution 1: Could not find FlexNet Publisher folder by the method shown.
    Solution 2:
    Found and deleted the Flexnet Publisher folder.
    Downloaded the Adobe Licensing Repair Tool ( = LicenseRecovery 111.dmg)
    Run License Service Update (bearing in mind this is intended for MacOSX 10.7 and not 10.8 which is my system), as follows:
    Double clicked  this 111.dmg to get Volume (folder) LicenseRecovery 11.6.1 and opened the folder to locate LicenseRecoveryLauncher.
    Got to Terminal and opened it.
    Typed sudo python with end space and dragged LicenseRecoveryLauncher app      in and hit Return.
    (Was not sure at all what was meant by the" path to the APP file").           
    Text and Password: appeared. I tried to enter my password but the screen remained totally unresponsive.
    I hit return and tried to enter my password again - but no characters appeared as before. Hit Return and text appeared seeming to indicate some error. (I have no idea what is going on - the use of Terminal is totally strange to me.)
    Cleared all from terminal using Edit and tried all this a second time with the same result. A screen shot is attached.
    Hence had to abandon Solution 2.
    At this point I saw the further solutions and decided I was not competent to use these and so suspended my attempt to get my Photoshop Elements 8 running again while I consulted Adobe further for a more user friendly approach.
    I do not know if there is any other approach you can offer to make my PSE8 come to life again which does not involve a more detailed knowledge of computer management than I possess but I should like to know, in simple terms just what has gone wrong with my PSE8 that stops me using it.
    Could you please answer my questions below?
    Is the "Licensing" thing a problem with Adobe or with Apple or with a third party?
    If the License is something issued by Adobe on original purchase, cannot Adobe simply issue me with a new license?
    Do I have to buy a later version of PSE in order to use it again - and if so what guarantees do I have that the same problem will not arise in a few years' time?
    Best regards,
    Reg Phillips

  • I want to install adobe cloud. I have a mac with osx 10.6.8. is that possible?

    I want to install adobe cloud. I have a mac with osx 10.6.8. is that possible?

    i don't think so ... u should update to mavericks thru app store. .. still free

Maybe you are looking for

  • Customizing request & Workbench request

    Dear all,                 What is the differance between Customizing Request & workbench request?

  • Access + asp + working half the time....

    So, I have been going through the forums and books and cant seem to find an answer to my problem...I have gone through all the online documentation and bought the book Dreamweaver 8 with ASP, Coldfusion, and PHP (Jeffery Bardzell) and have finaly got

  • How to create a segement in we31 for an Idoc

    Hi, How to create a segment in we31 for an IDOC . I tried its showing an error Name range violation: Name not permitted in customer system

  • Airport Express and Audio

    I'm new to Macs and Airport but so apologies for my ignorance... but I want to know is it possible to send all audio to my airport express connected speakers or can it only be done with itunes. At the moment i have my speakers connected to my airport

  • Using case in a function

    Hi, I have a fuction that accepts one input parameter, called v_inp. And this is the code of the function that i see in the code editor: --initialize variables here V_OUTPUT NUMBER; -- main body BEGIN case v_INP when 15,16,17,18,19 then V_OUTPUT := 1