C410b photosmart premium keeps shutting down part way through printing off pdf documents

my new c410b photosmart premium keeps shutting down mid way through printing pdf documents
then powers back up with an error message on the display about being shut off inproperly

Here are a couple of ideas:
1. (my favorite) - connect the printer to the router with an Ethernet cable for virtually the same functionality, more speed and fewer connectivity issues.
2. Reset by turning the printer off, holding # and 6 keys while and for a few seconds after turning it back on.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • I was updating my iphone, but my computer shut down half way through restoring my old settings. When I turned my computer back on, i tried to continue with the restore but the original backup i was trying to use wasn't there anymore, it had been replaced.

    I was updating my iphone, but my computer shut down half way through restoring my old settings. When I turned my computer back on, i tried to continue with the restore but the original backup i was trying to use wasn't there anymore, it had been replaced.

    Try resetting the SMC.
    MacBook and MacBook Pro with a battery you can remove
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer
    To reset the SMC on newer Mac portables with a battery you cannot remove
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.  
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • My ipod 5th gen keeps shutting down but today is turned off but it wont turn back on

    my ipod 5th gen keeps shutting down but today is turned off but it wont turn back on

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • ITunes had to shut down half way through iPad iOS download now its stopped working

    My iPad now has a black screen with white apple logo - it won't respond to anything and iTunes doesn't find it.  This is ever since halfway through updating its iOS to 7.0.2, I tunes had a problem and had to shut down.  Can anyone help please please

    Hey Tom Taylor2,
    Thanks for the question. I understand you are experiencing issues updating your iPad to iOS 7. If you have not already done so, you may want to restart or reset the iPad:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the above steps do not resolve the issue, you'll want to restore your iPad with iTunes in recovery mode:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • Is there a way to print the pdf documents?

    Hi i have 20pdf files in a folder. i need to pick up all the documents in the folder and sent them for the print. in java how to do this?

    we need to have an associated application installed in the system for that particular fileYup.
    does javax.print api works for pdf files and word documents?Nope.
    There is something called (I think) iText which can handle PDF documents. No idea whether it includes a printing facility or not.
    db

  • My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

    My iMac starts up and then shuts itself down during the boot up process. it shuys down half way through the Apple logo appearing. any ideas how to fix?

    Hi daveormond,
    I'm sorry to hear you are having these issues with your iMac. If you continue to have issues with your Mac shutting down part way through the boot up process, you may find the troubleshooting steps outlined in the following articles helpful (given your description, it sounds like it could be either issue, or a combination of both):
    Mac OS X: Gray screen appears during startup - Apple Support
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
    Regards,
    - Brenden

  • I am trying to convert a PDF file to Word, and the microsoft explorer window keeps shutting down?

    Microsoft Explorer keeps shutting down during the conversion of a PDF file to Word and gives me an error message regarding the Adobe web page.  It keeps circling back to the PDF conversion window and will not allow the process to continue.  What can I do to continue the PDF conversion process?

    Please try the solution presented in this document: http://forums.adobe.com/docs/DOC-1831
    We're sorry to hear you're having trouble!
    -David

  • I recently subscribed to iTunes Match.  iTunes is trying to match and upload songs not purchased from the iTunes store; however, it keeps shutting down before it finishes.  Has this happened to anyone else?

    I recently subscribed to iTunes Match.  iTunes is trying to match and upload songs not purchased from the iTunes store; however, it keeps shutting down before it finishes.

    Turn off iTunes Match while holding down the Option key (Shift for Windows) then quit iTunes. Open it after a few seconds, and turn iTM back on.

  • My iphoto keeps shutting down while I'm typing a caption. Is there some way to avoid this?

    My iphoto keeps shutting down while I'm typing a caption. Is there a way to stop that?

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    What version of iPhoto?
    Regards
    TD

  • New PC keeps shutting down

    My new PC from Christmas keeps shutting down unexpectedly. Is there some way to diagnose why so I can find a cure? My model is a HP ENVY 700-230qe CTO Desktop PC . It is running windows 8.

    Hi,
    If your PC behaved this way before you started installing or changing software then you should contact HP support.  HP's support number is 800-474-6836 or 800-HPINVENT or online here.
    Don't enclose the PC in a restricted air space. This could cause overheating.
    If you are running modern intensive gaming or video intensive software then it's possible that the video processor is overheating.   Are you running heavy video or CPU intensive tasks when your PC shuts down?
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • My iPad air keeps shutting down on its own!

    My iPad air keeps shutting down on its own, and this is the second IPad Air doing this. I really don't want to go trade it in for another. Does anyone have the same issue and is there a way to fix it? And yes I've done the manual reset and computer reset.

    Memory Size & The Impact of 64-bit Applications
    The iPad Air, like the iPhone 5s, ships with 1GB of LPDDR3 memory. Apple frowns upon dissection of review samples but I think it’s a safe bet that we’re not talking about a PoP (Package-on-Package) configuration but rather discrete, external DRAM here. It’s also probably a safe bet that even the iPad mini with Retina Display will ship with 1GB of memory as well.
    Something I didn’t have time to address in my iPhone 5s review was the impact of 64-bit applications on memory usage. I actually ran some tests after the 5s review hit but never got the chance to share the data, so I figured now is as good a time as any to do just that.
    Unlike traditional desktop OSes, iOS doesn’t support paging to disk (or in this case, NAND). Application data can either reside in memory or the associated process is terminated and has to be reloaded the next time you request it. It’s a decision likely made to both maintain user experience and limit the number of program/erase cycles on the internal NAND.
    The good news is that iOS was architected to run on as little hardware as possible and as a result tends to be quite memory efficient. There are also power implications of going to larger memories. The combination of these two things has kept Apple on the conservative side of increasing memory capacity on many iDevices.
    The move to a 64-bit platform however does complicate things a bit. Moving to a larger memory address space increases the size of pointers, which in turn can increase the footprint of 64-bit applications compared to their 32-bit counterparts. So although there’s clearly a performance uplift from app developers recompiling in 64-bit mode (more registers, access to new instructions), there’s also an associated memory footprint penalty. Since the iPad Air and iPhone 5s don’t feature a corresponding increase in memory capacity, I wondered if this might be a problem going forward.
    To find out I monitored total platform memory usage in a couple of scenarios. Before measuring I always manually quit all open apps and performed a hard reset on the device. Note that the data below is reporting both clean and dirty memory, so it’s possible that some of the memory space could be recovered in the event that another process needed it. I hoped to minimize the impact by always working on a cleanly reset platform and only testing one app at a time.
    I looked at memory usage under the following scenarios:
    1) A clean boot with no additional apps open
    2) Running Mobile Safari with 4 tabs open (two AnandTech.com tabs, two Apple.com tabs, all showing the same content)
    3) Infinity Blade 3 (64-bit enabled) sitting at the very first scene once you start the game
    4) iOS Maps in hybrid view with 3D mode enabled, with a WiFi assisted GPS lock on my physical location
    5) Google Maps in the same view, under the same conditions. I threw in this one to have a 32-bit app reference point.
    In general you’re looking at a 20 - 30% increase in memory footprint when dealing with an all 64-bit environment. At worst, the device’s total memory usage never exceeded 60% of what ships with the platform but these are admittedly fairly light use cases. With more apps open, including some doing work in the background, I do see relatively aggressive eviction of apps from memory. The most visible case is when Safari tabs have to be reloaded upon switching to them. Applications being evicted from memory don’t tend to be a huge problem since the A7 can reload them quickly.
    The tricky part is you don’t really need all that much more memory. Unfortunately as with any dual-channel memory architecture, you’re fairly limited in how you can increase memory capacity and still get peak performance. Apple’s only move here would be to go to 2GB, which understandably comes with both power and financial costs. The former is a bigger concern for the iPhone 5s, but on the iPad Air I would’ve expected a transition sooner rather than later.

  • I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

    I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

    Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
    If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

  • Nokia Lumia 925 Windows phone keeps shutting down

         I have had a problem for the past 2 months, my Nokia Lumia 925 with Win 8.1 keeps shutting down spontaneously. (I did not have this problem before 8.1)  This is my third phone in the last 2 months (warranty program keeps sending me replacements) and it shut down for the first time this morning. All 3 have developed the same problem, the phone will shut down spontaneously and the only way to start it up again is a soft reset (Volume down + Power for 15 seconds). I have had a total of 10-15 shutdowns between the 3 phones and this is a conservative estimate.
         I am thinking that this has to be a setting or an app that I use (and few others do) that is causing the shutdown since I have only seen a few other similar issues in the forums. Here are some of the basic facts about my situation and some of the actions I have taken:
                  - I have wiped the phones repeatedly (3 phones wiped a total of 3 or 4 times not including the initial setup of the replacement phones, which is getting really old--really fast).
                   - I have tried turning off NFC, but that obviously  wasn't the issue because NFC was off this morning when it shut off.
                    - I have tried trimming the screen protector/screen guard I installed as suggested in one of the other forums even though that seemed ridiculous (I think that was a different model phone too, but I gave it a shot)
    I have not noticed any common occurrence such as
                               --when a certain app is running
                               --when it is on/off charger,
                               -- When the battery is full or low (it was 24% this morning).
                   -I have 2 chargers, 3 if you include the car charger that I have never had to use due to great battery life. 
                   - I have called tech support several times, all AT&T can tell me is that this is not a known issue and I should wipe it again. Nokia says the same and that I should send it back to them for repairs. That seems fruitless to me because I have had 3 different phones, what are they going to repair that a new phone won't fix?
           It takes me 3 hours to reinstall and set up my apps, I am getting very frustrated. I really love the way this phone functions, the software is good, the screen is brilliant and very sensitive, the camera is great (although a bit slow), and the size and feel are perfect for me...I hope that someone here on the forums can help.
    Thanks for your help in advance...
    Al

    Hello, mariaadamsky.
    We appreciate you reaching out to our community regarding your concern. You are using a Lumia 925 as well, correct? Did something happen to your phone that possibly caused such behavior? Did you try doing fixes on it? 
    Latest software released for Lumia phones is the Lumia Cyan. To confirm that you have it installed on your phone, go to Settings> extras+info. You can also try going to Settings> phone update> check for updates to check if there's an available update. Are your system apps also updated? While connected to WiFi, go to Store> ...> downloads to check for pending updates. Let's hope that the phone will not shut down while doing this process.
    By the way, we can try other fixes that could help us identify the real cause of the issue. In case you wish to have it repaired in a Nokia Care Point, warranty claim may vary per region and Nokia does not have an international warranty. Also, creating a backup is a must to avoid data loss. Where did you buy the phone and where are you located right now? To know about the manufacturer's limited warranty, go here: http://nds1.nokia.com/files/support/global/phones/guides/Nokia_Manufacturers_Limited_Warranty_with_W.... 
    We look forward to your reply.

  • Internet Explorer keeps shutting down

    Hey
    Im having a problem with Internet explorer at the moment. It keeps shutting down with the error message "Internet Explorer has stopped unexpectedly, window is searching for a solution"
    This is happening at very frequently and im not even getting 2 mins of internet usage before it shuts down.
    Im not very techy so any help would be much appreciated.
    Cheers

    Hi,
    If you are working in older versions of Internet Explorer you are missing out on these new features and functions. If you don't spend too much time on the computer then you might not have to worry. But if the Internet is an important part of your everyday life, you will want to update your version of Internet Explorer.
    To update Internet Explorer, follow these directions:
    - Open up an IE browser.
    - Select "Tools" and then open "Windows Update."
    - Select "Custom."
    - Make sure there is a check mark beside "Internet Explorer."
    - Next, select "Review" and "Install Updates."
    - Now you can close the browser.

  • Internet keeps shutting down randomly

    Just got my Mac Mini and love it so far, but my internet keeps shutting down randomly and restarting itself. Is there a lack of memory being used for it and is there a way to change it? If so, how much should I allow it to use?

    I'm on a LAN line, no router, the School is the ISP... Haven't had this problem on my PC. I did it about 2 times in a row, but hasn't done it since.

Maybe you are looking for

  • DBMS_SQL.PARSE with PL/SQL types

    Hi I need to use DBMS_SQL.PARSE with PL/SQL types defined in a package. I tried with a type record in a declare ..begin..end  script but I got an error ..(on second parameter): DBMS_SQL.PARSE(cursor_name, XXXXX, DBMS_SQL.NATIVE); It's possible? WIth

  • RAM!?!

    ok so I recently installed an extra gig of RAM in addition to the stock 512. Anyway it was causing my apps to crash randomly. I reset the pram and non-vol ram to solve this problem. It seemed to have worked but for about the past week and a half I ha

  • Movieclips visibility

    Hi, having trouble with something.  I have created two symbols which I intend to display on a button click.  In actionscript, I have assigned each symbol to a movieclip variable.  If i then set their visibility to false, they do not display.  However

  • Overflow in cost collector - table AFPO field WERWT

    Dear All, I've a problem with the Cost Collector due to an overflow for the field WERWT (Value of goods recipt) in the table AFPO. The problem is the value of the currency. How can I reset this field's value? I think to re-create the cost collector b

  • Forms 6i and Portable Java Components

    Hello Where do I have to place my Java classes (PJCs) for the Forms 6i to find them. Now i place them in c:\ora\FORMS60\java but Forms 6i cant load them and my bean areas are empty. Can somebody help please. I cant run PJC demos for forms 6i for the