C4780 Wireless setup on MacBook Air

Hi
I recently upgraded to a MacBook Air (running Mountain Lion) and I have changed my internet provider. This means that when I try and use my printer wirelessly, I have no way of setting up the WiFi as my laptop does not have a C.D drive and so I cannot use the original installation C.D. 
Whenever I try and use the WPS push button setup, the printer tells me there is a WPS error every time and so I cannot connect that way either. 
Is there anything I can do?

Does your router have WPS?  That is the easiest way.  Start WPS on the pirnter, then within 2 minutes start WPS on the router.
If not, this procedure is clunky, but works:
1. On the front of the printer: Start [Scan] > Wireless > Restore Defaults.
2. On your Mac look for a wireless network named 'hpsetup'.  Connect to it.
3. Back on the printer in the wireless menu, print a Wireless Network Test.
4. Type the printer's IP address into Safari.
5. On the printer's internal settings page in Safari, click on the Network tab and run the Wireless Setup Wizard.
6. Connect your Mac back to your main wireless network.
7. Add the printer normally in System Prefs > Print & Scan.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • I cannot print wirelessly from my macbook air

    I am trying to print wirelessly from my macbook air 256gb. We have a HP Deskjet 3050 J610 series. It works fine printing when I plug my computer into the cord that is connected to the printer. but without the cord, it says the printer is "offline". I am wondering if the only way to print is if I connect it with the cord, or if i can somehow print wirelessly that I do not know about. thanks!

    also, the printer says it is not connected, maybe if i connect it, i can print wirelessly. how do i connect it?

  • Canon Wireless Printer Setup on MacBook Air without Super Drive access

    I just bought a Canon Pixma MX 920 Printer and can't figure out how to install the wireless setup and the printer drivers without using the startup CD as I don't have access to a Super Drive.  I have a 3 month old Mac Air using Mountain Lion and I'm also trying to set this up on an older Mac Air. The Canon website has been no help at all.  I'm installing this for a family member while visiting from out of state so I'd like to do this before I leave Monday.  Suggestions?

    You can download Apple's drivers:
    Apple Canon Laser Printer Drivers 2.0
    Apple Canon Printer Drivers 2.11
    You can also go to Canon's support site to locate and download drivers for specific printers.

  • Wireless Projector and Macbook Air

    I have a Macbook Air and I will be giving a presentation next week. I was told that they have a wireless projector for me to use. What exactly do I need to use a wireless projector on my Macbook Air? I have the cord that is used to attach for wired projector, but I have not used wireless before. I am not sure the brand of the projector if that makes a difference.
    Thank you!

    I would contact the host of the presentation and see how their setup works. I copied the information below from a 2010 posting. Hopefully the host has a usb interface for the projector (similar to what some mice have as a transmitter from the usb port)
    ================================================================================ =
    So you want to use the projector as the monitor for a computer, but you want to use wireless to join them?
    You won't be able to do that using an Airport network. Computer networks can only pass data that's been specially formatted. They can't pass video streams in a form that a monitor or projector can understand.
    To do this you need a video sender - a device that accepts a video feed from a TV, DVD or satellite box, then sends it wirelessly to a receiver which you connect to your TV or projector. In your case, you would need an S-Video output on the computer to connect the sender, then connect the receiver to the S-Video input on your projector.
    Problem is, video senders don't work as well as cables. You'll get some degradation of picture quality (noise) and possibly some interference from other wireless devices (dropout).
    If you want to watch video that's stored on a networked computer, with decent picture quality, you'll need to connect a computer or a network media player directly to the projector using a HDMI or DVI cable.
    ================================================================================ =

  • Wireless drop of Macbook Air (mid2012)

    I have Macbook Air 13 inch- (mid 2012) with software OS X 10.8.4 (12E55) , i have problem with wireless connection which it drops always, i tried to install windows update 1.0 for (mid 2013) but it not work & gives me message that it isn't support on my system, so now please tell me what the solution to solve this wireless drop.

    Back up all data before making any changes.
    Step 1
    Take all the applicable steps in this support article.  
    Step 2
    If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
    From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
    If the application called "Bluetooth Setup Assistant" is running, quit it.
    Step 4
    This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Reset the System Management Controller.
    Step 5
    [See related.]

  • Wireless printer, iPad, MacBook Air

    I have a MacBook Air, iPad one, Brother 5520dw wireless printer, and an HP PC Desktop. How can I get the wireless to work for my MacBook and iPad?? The Brother printer is not on the list of supported AirPrint printers. is this a job for Printopia or Print N Share or another app?

    Hi Dagnabit47,
    Welcome to Apple Support Communities.
    It sounds like there is an issue adding a wireless printer on your MacBook Air. The article linked below will walk you through the process of adding the printer and ensure the MacBook Air setup correctly.
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    Add a Wi-Fi printer
    Follow the instructions that came with the printer to connect it to your Wi-Fi network and turn it on. Use the instructions to unpack the printer, install ink or toner, and add paper. For more information, see this article:
    Apple Support article: Connecting a Wi-Fi printer to your Wi-Fi network
    Choose Apple menu > Software Update to make sure OS X has the latest information about printer software it can download from Apple. If Software Update doesn’t list an update for your printer, you have the latest software.
    Open a document to print, then choose File > Print.
    Open the Printer pop-up menu and choose your printer in the Nearby Printers section of the menu. If you don’t see your printer, choose Add Printer from the Printer pop-up menu.
    A dialog appears listing printers on your local network. It may take a minute or two for your printer to appear.
    If you’re asked for an administrator name and password
    Select your printer when it appears in the list, and then click Add. OS X automatically uses AirPrint if your printer supports it, or it selects printer software (also called a printer driver) and downloads it from Apple if necessary.
    I hope this helps.
    -Jason

  • Wirelessly connecting my macbook air to my smart tv (samsung)

    is it possible for me to browse the Internet using my MacBook Air/Airport Extreme and wirelessly connecting to my Samsung Smart TV?

    i use VUZE on my mac book air and my samsung smart tv connects to it to stream moives and pics. VUZE is torrent program

  • Exchange Setup on MacBook Air

    I am haviing trouble setting up my Exchange account for mail/calendar/contacts on my new MacBook Air.  I have no trouble with my IPhone 5 or my IPad.  Any reason why the setup would be different on the Air?

    No, when I click on the calendar appointment, it does show an attachment.  When I look at my calendar through Outlook, the attachment is there.

  • Trouble adding wireless printers to macbook air

    I have a mid-2011 11" MacBook Air. I'm trying to  add a couple of wireless printers we have set up on our network: Epson Artisan 1430 and Epson WorkForce 845. I've had no problem adding these printers to MacBook Pros we have, but neither printer will show as an option on the Air when I try to add them. ANy advice is appreciated.

    You cannot use a phone number as a calling ID on an OSX device, you can only use an e-mail address as a calling ID.

  • No multi-channel available with HDMI output in Audio MIDI Setup on Macbook Air mid-2011 !!!!!!!

    Hi everybody !
    I am currently facing some problem with seting up a surround sound system.
    I looked everywhere on the web but i couldn't find any proper answer to this problem.
    To sum up, i want to have a Dolby Digital or DTS surround sound when i'm playing a movie (with an AC3 audio track obviously).
    I have a Macbook Air 13" Core i7 connected to a SAMSUNG Plasma TV via an iWires thunderbolt -> HDMI cable (bought on the same time as the MBA). This TV is connected to an amp via an optical cable and this amp to a 5.1 system.
    When i am going to Audio MIDI Setup to configure the HDMI output, i cannot select any multi-channel option, only stereo !!!!
    Is someone has any idea how to solve this problem ? I am struggling a lot and spent hours on that without finding any solutions !
    Thanks a lot for your time !

    Hello ckkzzzle,
    I was looking into the issue you are describing and think I have a great article to help troubleshoot it. The article is called Apple computers: Troubleshooting issues with video on internal or external displays found here: http://support.apple.com/kb/ht1573.
    Start here, and work your way down as needed:
    Check connections
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    If more than one video adapter is in use—or "daisy-chained"—troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    All the very best,
    Sterling

  • Is it possible to wireless connect my macbook air to my tv?

    I have a 13 inch 128gb macbook air with the latest mavericks (10.9.1) and a VIZIO 42” Class LED Smart TV E-Series. Is it possible to wireless connect them so i can see my macbook air's screen on my tv? or do i have to get a hdmi to thunderbolt cable?

    Welcome to Apple Support Communities
    You can only connect your MacBook Air to your TV wirelessly if you have got an Apple TV. AirPlay Mirroring allows you to mirror your MacBook Air display onto your Apple TV.
    If you have not got one, you need to connect your Mac through a cable. If your TV has got a HDMI port, get a Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US

  • What is the best wireless printer for MacBook Air

    I am a new Mac user and have the new MacBook Air. I want to buy a wireless printer but have no idea which one would be best. I have always liked HP printers for my PC.  Thank you!

    We have owned several HP printers through the years, but I have been very surprised with Epson.  I would highly recommend the Epson WorkForce printer.  It's an all in one so it does it all.
    Quick Set up
    Qualifty Prints
    Works with all my apple products
    http://www.amazon.com/gp/product/B0091DPYDU

  • Does it cost money to setup a macbook air?

    if the macbook air costs money how much is it?

    The setup process is free, but the computer itself needs to be purchased. The price varies.
    (72337)

  • ENVOY 4502 Wireless Connection to MacBook Air

    Trying to connection my daughter's MacBook Air to the ENVOY 4502.  Computer sees the printer, but cannot connect to it.  Trying to help remotely.  Difficult!

    Hi @WMVTDad 
    I would like to help you connect your Envy printer to your daughters Mac. I understand you are trying to help her remotely. Please try the following steps;
    Let's reset the printing system, repair disk permissions, re-add the printer using the right driver, and try to scan again.
    Reset Printing System
    Click the Apple icon (   ), and then click System Preferences.
    In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Repair Disk Permissions
    On the Dock, click Applications, and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    Click the Repair Disk Permissions button at the bottom of the window.
    Once the repair is complete, restart the computer and add the printer back.
    When you add the printer, please ensure you are using the HP driver, not the AirPrint driver.
    Select Add other Printer or Scanner                                                       
    Select the printer you are adding and next to 'Use' you can the printer driver 
    If the issue persists, try the solutions in the following document. Although you (your daughter) may not be seeing a printer offline, it sounds like you are experiencing the symptoms offline behaviour; 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Mac OS X
    I look forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP laserjet pro M1536dnf wireless setup to use Air print

    Since I trying to print from my new Ipad Air, excuse my newbie networking printing questions!
    This what I know so far:
    1. I understand my HP laserjet pro M1536dnf is 'not' a WiFi  printer.
    2. As per HP Support and the Apple Support web sites, my HP laserjet pro M1536dnf is 'Air Print' enabled. I guess a certain firmware update must of incorporated the Air Print capabilty!
    3. As per HP Support web site, I currently have the latest firmware installed ( 20130815 ).
    Note: On my Config Report, it shows the status for both IPv4 and IPv6 as 'Network Cable Disconnected '. I have Show IP address as enabled.
    3. My home setup has the cable internet going from my cable modem to my wireless Linkys E3200 router via coaxial cable. From my router to my computer is wired via the Ethernet cable. My HP Laserjet 1536dnf printer is wired to my computer via USB cable.
    Questions:
    1.  Going from I seen and read on on-line, is correct to say 'I will have to change my Ethernet cable going from the router to the computer and change it to from the router to the printer's Ethernet port?
    2. Will I have to remove the USB from Printer to the computer?
    3. By removing the USB cable between the printer and the computer, how would my computer communicate to the printer to perform a print job? Unless, I'm guessing, I add another Ethernet cable between the router and my computer's  ethernet port!
    4. Any other tips, that I might have missed?
    This question was solved.
    View Solution.

    Hi,
    Based on the following list, your printer supports AirPrint:
       http://support.apple.com/kb/ht4356
    Therefore to print from your iPad, please use the following instructions:
    How to print in iOS
    You can print from the Apple applications, such as Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, Filemaker Go, and so on. Apps available from the App Store may also offer this feature.
    To print, follow these steps:
    Tap or , which are at the bottom of your screen.
    Tap .
    Choose your printer, the number of copies you want, and then tap Print.
    Note: If you are printing for the first time, ensure that you are within range of your printer. All AirPrint-enabled printers within range will be displayed.
    Source: http://support.apple.com/kb/HT4356
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Computer recognizes ipod but itunes doesn't

    Itunes use to recognize the ipod but now it doesn't. I've reformetted my computer & have the latest version of itunes. It started when I restored my ipod. Suddenly itunes won't recognize it but windows will. This was before & after I reformatted my p

  • Trying to use a SessionListener

    My session listener doesn't seem to be listening. At the top of my web.xml (before any servlet elements, and I have nothing like a filter or anything else before it), I have this: <listener>         <listener-class>central.OurSessionListener</listene

  • Which video card to use?

    I have a 24" external monitor attached to my MBP. Should I be using the better graphics card (9600M GT, or the normal 9600M)? Currently I am using the 9600M and things seem ok. I'm just wondering what advantages would come from using the better one?

  • Kodo JDO with JCA provided by Jencks in Tomcat

    I'm trying to use both JDO and JCR (Apache's Jackrabbit) in my project. Both support XA Transactions, and my understanding is that to best ensure data integrity, I should start using them. Currently, I'm running under Tomcat using the SpringFramework

  • CSV - Internal table - CVS

    Hi all, type-pools: KCDE. data:  itab_csv type KCDE_INTERN. DATA: i_text(9999) TYPE c OCCURS 0. CONSTANTS c_delimiter(1) TYPE c VALUE ';'. SELECTION-SCREEN BEGIN OF BLOCK 001. PARAMETERS: p_file LIKE RLGRAP-FILENAME OBLIGATORY DEFAULT 'c:\temp\EBV\sa