C5 - Ringtone sound deformation problem :(

I have huge problem with Ringtones sound in my C5.
It runs under 031.022 firmware, which is the latest version available in Polish Ovi Suite.
Background info:
-> MP3 tracks play normally. Both on earphones and C5's speaker.
-> SMS alarms have normal sound when messages are coming and inside settings section.
-> Ringtones in settings section play normally.
What's the problem:
-> When someone calls, ANY ringtone is totally messed up. Original Nokia ones or my MP3's, it doesn't make a difference.
It sounds like it has some flanger effect on it. It's broken and unbearable to listen.
I suppose it's a problem with a software, not with a hardware, because C5's speakers work fine while playing MP3's, SMS alarms or even Ringtones in settings section.
I've reinstalled firmware using Ovi Suite. This operation went fine, but it didn't help a bit.
Is there any solution?

back up your data and try reset
type in *#7370# security code is 12345
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Why is the Lumia Icon's ringtone lower than when previewing the ringtone in settings/system/ringtone sounds? (The volume is set at 30 in all cases.)

Why is the Lumia Icon's (929) ringtone lower than when previewing the ringtone in settings/system/ringtone+sounds? (The volume is set at 30 in all cases.)

Hello Lena,
Yes, tried all those things.
After going back and forth with Verizon's "tier 2" technical support over the last 2 days, a chat session with Nokia, no call-backs-as-promised by your technicians, then having them reinstall the phone's software -that didn't fix the problem. So they are sending me a re-manufactured replacement phone. But not a NEW ONE, because I didn't realize the problem within 14 days. You see at first, I just figured the phone had lousy volume, until I was previewing ringtones when setting the alarm clock. The phone is about one and a half months old. I have expressed my desire that a NEW phone be sent, but NO says Verizon.
I've spent enough time, in good faith, Verizon would solve this matter, but in the process of their re-installing the software they've screwed up Backup Assistant.
Thanks.

Why does the ringtone sound worse AFTER I download it?

Hi guys,
I'm having an odd issue. I just bought three ringtones direct on my iPhone 4S from the iTunes 'Tones' section, and when I set them as ringtones and preview them on the phone they sound really crappy. When I previewed them in the 'Tones' section and streamed them the sound was full and clear. Any ideas?
Much appreciated,
Sacha

I have exactly the same problem, the best way of describing the problem is that the ringtones sound very tinny, possibly distorted like they've completely lost the bass and much of the lower midrange.
Like Sacha I've purchased 2 ring tones from the iTunes store within my iPhone 4S (Nicki Minay - Super Bass, and The City of Prague Philharmonic Orchestra - Star Trek the Motion Picture), within the store they sound great but as soon as their assigned to ring tones they sound awful. At first I assumed that the downloads must have been poorly compressed or something but I've since confirmed they play great on my PC.
I've also noticed something even more odd, if I use the ringtone as a text message tone on the iPhone one of them sounds great as it should but the other ones won't even play, very strange! I've had a look at the tones on my PC and both are 30 seconds long, and both are compressed to 256kbps at 44.1khz so no obvious differences. I've recompressed them to alternative bit rates but nothing seems to make a difference to the sound quality as a ring tone.
I've since tried both ringtones on my Wifes iPhone 4 and her's exhibits the same problems so not a handset or iPhone 4s specific issue. It sounds to me like a software bug in iOS5?

The specific ringtone I assigned to a contact is not working. Only the default ringtone sounds off.

I'm using an iPhone 5s. The app I'm using on my iPhone is simply titled Ringtones with an orange music note inside a grey circle. I have assigned certain app created ringtones to specific contacts. However when one of those contacts calls me ONLY the main / general / default ringtone sounds off. I know the tones work because if they are assigned as the default ringtone that specific tone plays. I have tried other ringtones that were included on the iPhone (NOT app created) and those work when assigned to contacts. So it seems it's only the app created ringtones are not working when assigned to specific contacts. So far I've tried to correct the problem by:
1) Removing ringtones from phone and then downloading them again.
2) I've tried rebooting or performing a soft reset (pressing and holding the home button & power button until the apple logo appears).
Anyone have any other suggestions?

Hello Gemese,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106

Ringtone sounds not working correctly

I don't know what happened to the ringtone sounds on my iPhone 3gs. I'm wondering if there's something wrong in the settings.

What does "not working correctly" mean?
Is the silent switch on?

Sound device problem in ZONE

I created a solaris zone for my desktop use, but the sound device was not avaialbe. I tried to export it from the global zone:
device
match: /dev/sound/*
then rebooted the zone, login it, found there were several files added in /dev:
lrwxrwxrwx   1 root     root           7 Sep 17 14:50 /dev/audio -> sound/0
lrwxrwxrwx   1 root     root          10 Sep 17 14:50 /dev/audioctl -> sound/0ctl
crw-------   1 root     root      34, 0 Sep 17 14:50 /dev/sound/0
crw------- 1 root     root      34, 1 Sep 17 14:50 /dev/sound/0ctlThe problem is: how to change the /dev/sound/* files for all users to read and write, permanently?
I tried the following methods but failed:
1. Change manually these files' mode to a+rw as root. But once I logged out the zone or rebooted the zone, the changes were lost.
2. Create a script in /etc/init.d/ and link it to /etc/rc3.d/ to let it auto execcute when boot, as below:
#!/sbin/sh
/usr/bin/chmod a+rw /dev/sound/*
echo `date '+%D %H:%M:%S' > /var/tmp/enable.audio.log
ls -le /dev/sound/* >> /var/tmp/enable.audio.logthe content of /var/tmp/enable.audio.log is something like:
crw-rw-rw-   1 root     root      34, 0 9月 17 14:50:30 2005 /dev/sound/0
crw-rw-rw-   1 root     root      34, 1 9月 17 14:50:30 2005 /dev/sound/0ctlBut oddly, the permissions of these files would always be changed back to the original state soon, automatically.
3. I added an entry in /var/spool/cron/crontabs/root to change the permissions every 10 mins, and it did work, strangely. However I think it's not a good method, because I have to wait for 10 minutes before I can login it (if I login the zone before the permissions were changed, the sound device will never work)
Thanks in advance.

It's probably /etc/logindevperm that's fighting you. Read the comments in that file, then you can modify /dev/sound in it.
The idea is that only the user logged in on the console would normally have access to the audio device and the frame buffer, so the permissions are reset at login.
If you're having folks login through a separate zone, this changes that assumption.
Darren

Sound & Bluetooth problems for lenovo G 560

    Sound & Bluetooth problems for lenovo G 560-
Speakers create noise when increase the sound or change window.
Bluetooth icon & drivers dissappear after sometime.(Fn + F5 doesn't work)
They appear again after restart.
Warranty Status Lookup
Product ID:       Type-Model:       Serial number:
59304299       0679-N/A       CBxxxxxxxx
Location:       Expiration date:
India          2012-08-31
Moderator Note; s/n edited for member's own protection

Hi lenovoG60,
Welcome to Lenovo Community!
You may want to try updating all of your machine drivers such as
Lenovo Energy Management (power management)
Bluetooth drivers
Sound card drivers
Chipset drivers
Look for the drivers from our support site.
Best regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Audigy 2 sound card problems

I am hoping that someone out there can help me in a crucial situation.
I am using an Audigy 2 sound card with creative 5. speakers.
I also use Adobe Audition to edit, record sessions for my voice-over jobs.
Recently, I attempted to hook up a web cam so that I could see my grand daughter on the west coast.
After hooking up the web cam, I noticed my home studio environment changed drastically. I began having trouble with recording using my microphone through my Macki mixer. I began hearing a continuous hiss that I had never experienced before.
In fact after uninstalling the web cam, and restarting my computer, I got that horrible blue screen on my computer indicating the world was about to end! Smile
Long story short, I was able to finally get my computer back up, but I continue to experience problems recording "clean' audio".
Three things, after reinstalling Creative from disc several times and restarting my computer I receive a window stating Creative Media Source Detector.....Unable to load needed components....Please reinstall the application"
Also, when trying to test my sound hardware I get a message stating...Direct play voice setup..."an error occurred during direct play voice setup....error code 0x80004005
Last but not least I cannot access the "Creative diagnostic feature on my computer. I only get a small window for this feature that will not open up fully and allow me to run a diagnostic test!
I know this is a lot to absorb, but I cannot get anyone from Creative to address my problems because I am out of warranty and therefore not getting any love from this company.
Need your advice and or guidance on this.
Please respond when time allows.
Vopro

Re: Audigy 2 sound card problems? use add/remove programs and remove all creative software and drivers, then do the same for your web cam and unplug it
restart your pc
download and install [url="http://downloads.guru3d.com/Guru3D---Driver-Sweeper-%28Setup%29-download-655.html" rel="nofollow">driver sweeper[/url] and use it to clean up any left over creative bits and bobs and restart your pc when it asks you to
now download and install the [url="http://support.creative.com/Products/product_list.aspx?catID=&CatName=Sound+Blaster" rel="nofollow">latest audigy drivers[/url]
once your back in to windows try recording something and see if everything's back to normal
now reinstalling your web cam but don't reinstall using the cd that came with it
find the manufacturer's website and get the latest drivers
install cd's best avoided simply because the software and drivers they contain are typically the initial release versions, and so potentially very old
and i think we can all agree that old, buggy drivers can be a real pain

Intermittent sound & voice problems

I have been having Intermittent sound & voice problems
During the last week when making receiving the voice and sound from the speaker is distorted on both ends of the conversation
I have to restart the mobile and it works fine for a day or so then starts again
I reset the phone to factory setting and it seems to have no effect
Has anyone else had these problems?

http://www.sonymobile.com/global-en/support/contact-us/
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

How do you access individual ringtone sound files?

Hello,
Does anyone know how to access the individual ringtone sound files on a Nokia E7 running Symbian 3 - Belle? I'd like to download them off of the phone.
Thanks,
Dave

DjDave5 wrote:
Does anyone know how to access the individual ringtone sound files on a Nokia E7 running Symbian 3 - Belle?
You will find the answer to your query in this screenshot, but as this is a manufacturer's sponsored forum please do noit expect me to elaborate:
Happy to have helped forum with a Support Ratio = 42.5

How I fixed my Toshiba Satellite sound distortion problem

I've been trying to get the garbled sound recording problem fixed on my Satllite L745-S4210 for months. I have been on this forum and other forums. Alot of people have given me their time trying to fix it, but I managed to do it myself. In the Microphone Properties Advanced Section is a box "enable audio enhancements" I unchecked that box and all my recordings are now crystal clear!

Satellite L745-S4210
garbled sound recording ... a box "enable audio enhancements" I unchecked that box and all my recordings are now crystal clear!
Thanks for that contribution.
The box should be labeled "enable garbled recording."
-Jerry

Fixed my sound crackling problem! Soundblast X-fi Xtrememusic c

I received my Soundblaster X-fi Xtrememusic card yesterday evening and having sound crackling problem. I could hear this crackling sound whenever I play music CD or play Battlefield 2 and it was annoying,? So I searched Google about this and found a thread on this forum about a bunch of people having this same problem. I just thought I should post my problem/solution to see if this fixes for you guys. The issue with my system was because of my wireless Belkin Pre-N desktop card. Here is how I found out:?. Was having crackling problem so I reinstalled Windows XP w/ SP22. After Windows XP installed, the first driver I installed was for?Soundblaster X-fi card3. Tested the sound by playing music CD. Couldn't detect any crackling sound.4. Installed Belkin?wireless?Pre-n desktop card driver and crackling sound returns. >5. Uninstall Belkin driver and turned off computer6. Put in my old D-Link DWL 520 Wireless card and installed driver for it. So far X-fi seems to like D-Link DWL 520 card!?I tested with D-Link DWL 520 by listening to music and downloading 28mb file off Nvidia and no crackling sound! I hope this help for you guys! I love X-fi now... I was about to return it back to Newegg. ?My system spec:Windows XP w/ SP2AMD 64 X2 4400+ (at stock speed)Asus A8N-SLI Premium MB2GB Corsair memory600 Watts Seasonic power supplyEVGA 7800GT SLI2x 250GB Western Digital HD on?NVRAID0?Message Edited by ktun on 02-28-20060:59 AM

Same thing here... X-Fi Titanium Fatalty Champion, P5E3 Deluxe (x38)..using Windows XP SP3
check it out ftp://ftp.int3.ru/X-Fi_Recording_Sample.rar

No ringtone sound

I set my ringtone, "strum", which sounds good, volume is high. When someone calls me no sound! I can see the incoming call, vibrate works, can answer calls OK, all ok but no ringtone sounds when caller calls me. Please advise! Thanks

Almost certainly have the phone in silent mode - check the slide button on the side and if you see a red dot you have inadvertnetly switched to silent mode.

Custom or Purchased Ringtones Sound Muffled in 6.0.1

Custom ringtones sound muffled when used as ringtones, yet sound perfect when used as text tone or any other alert. This was fixed in IOS 5.1 but is now back. This is easily tested by going to sounds and listening to the custom ringtone in Ringtone then go to Text Tone and listen to the same file. There is a marked difference. The Ringtone sounds muffled and narrow-no bass, not much treble, the Text Tone sounds perfect, as it should.

I like you I have not been a user of this functionality.
Another editor (who was only learning the system) showed it to me and my initial reaction was "Wow, That's what that does?"
This would have been very helpful on the last two features I cut.
I even have to ask when did this fuctionality first work in FCP?
and now that I know about it, why is this not in the contextual menus?
Apple/FCP talks lots about being in Feature Film workflows
but this is just the sort of tools that feature editors need and want.
I am happy that soundtrackpro may be upgraded and now useable
but these sorts of double sound system issues have never been FCPs strong suit. I do wish that apple would go back and upgrade the sound inside of FCP. (better sync tools, better timecode tools, and real 5.1 mixing in the time line) - Cinema Tools needs an overhaul badly for 24 fps HD matchbacks...
The other two biggies in FCP for me are:
1)
A better trim mode - (more responsive key commands - live trimming...)
But here is a tool that most everyone hates and apple should take a stab at a better version, anything would be better..
( do it right and you could sell a lots of multi-touch tablets
2)
Being able to cut from a sequence as source (without nesting the sequence).
Every editor coming from the Avid in the last two years I've spoken to, howls about it. And yes you can "select in to out, copy, paste" but they are right. Think like an editor thinks, "Take my assembly reel and use that as source"....
oh sorry
I was ranting..
I will stop now
all the best
G

C5 - Ringtone sound deformation problem :(

Similar Messages

Maybe you are looking for