C5 time does not work, even with network based tim...

Hi Nokia peoples,
When is the patch anticipated for our C5's to fix the broken clock problems?
If it just displayed the wrong time it would be one thing, but since it affects the ordering of text messages displayed et al, it's a bit more of a catastrophic issue.
Others have reported that hard resetting the device only lasts momentarily and that the bug is pretty fatal.
Thanks, please let us know the plan.

"Automatic time update" or Network based time update may not be available on all networks. check with some other operator sim

Similar Messages

Why does my iMessage not work even with my apple ID signed in?

Why does my iMessage not work even with my apple ID signed in?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom
BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

Error Parser does not work, even in SSX3

SunSudio Express (December 2006 release) introduces some interesting new features, but there are still problems. For the first time, I was able to debug Fortran 90 applications in Linux, but debugging is still very limited. Furthermore, the Fortran error parser does not work, even when compiling using Sun's f95 compiler. This is a heavy disadvantage. I assume that Fortran error parsing is not supported on Linux, although the tutorials don't make this point clear: In the Options window, there are settings concerning C/C++ (and its parser), but there are no similar options for the Fortran parser, even in "Advanced Setings" (which are similar to the old Options window). My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.
I don't think that I'm doing something wrong, but I want to ask, just to be sure: has someone had seen the Fortran error parser working on Linux? What about Fortran word completion?

SunSudio Express (December 2006 release) introduces some
interesting new features, but there are still problems. For the first time,
I was able to debug Fortran 90 applications in Linux, but debugging is
still very limited. This is good to know that you were able to debug a f90 application
on Linux. What problems do you see? Please, report them, and we
will file them as bugs or RFEs (requests for enhancements).
Furthermore, the Fortran error parser does not work, even when
compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
This is a heavy disadvantage. I assume that Fortran error parsing
is not supported on Linux, although the tutorials don't make this
point clear: Yes, it does not work yet on all platforms.
In the Options window, there are settings concerning C/C++ (and
its parser), but there are no similar options for the Fortran parser,
even in "Advanced Settings" (which are similar to the old Options
window). There will be similar options for Fortran.
My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
We do not target Debian system, but we assume everything
should work there (we test on Red Hat and SUSE).
Good to know that our assumption is correct :-)
I don't think that I'm doing something wrong, but I want to ask, just
to be sure: has someone had seen the Fortran error parser working
on Linux? No. It does not work on Linux, and it does not work on other platforms.
What about Fortran word completion? No, this feature is not implemented yet.
Thanks you for trying Sun Studio 12 Express release and for your report.
Nik

Network does not work or the network signal attenuates rapidly

Network does not work or the network signal attenuates rapidly

Hello shishir_teamo,
If you are having issues with Wi-Fi on you iPhone 4S, check the following article that will help troubleshoot the issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using Apple Support Communities.
Regards,
-Norm G.

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

This category is for iPod shuffle. Is that the type of iPod you have, because your description of the problem does not sound like it's about a shuffle? If it's not a shuffle, what is the iPod model...?
There is music there and I can play it connected to laptop.
Are you doing the playing using the iPod, or are you playing the music using iTunes on the laptop?
All mucis icons read "No music" and this is not correct
Do these icons with "No music" appear on the laptop's screen, or on the iPod's screen

Hi, My iPhone 4s does not work properly with the sound.

Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

My iphone 5 does not work properly with Ford Sync,

Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
Can someone help.

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs

I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
Has anyone else run into similar issues?
Robbie Gilbert
[email protected]

I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
In conclusion, I wish I had chosen another UI technology for our new product client, and may yet.

Touchpad does not work even after format - x220t

Hi there,
I've had my X220 tablet for about 10 months and it has been great. For the last month however, the touchpad and touchpoint have become flaky. When rebooted or coming out of standby, the touchpoint/touchpad often did not work; after resetting a few times, i would work, but then stop working again when the system when into standby mode.
I thought this was a driver issue, but uninstalling and reinstalling to the newest drivers did nothing. I have also updated/reset the BIOS.
I have more recently have not been able to get the touchpad working at all now and relying on just the touchscreen for input is very frustrating.
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
I read around a bit and have tried disabling JUST the touchpad in the BIOS, and amazingly, the touchpoint will work fine when I do that. When I disable just the touchpoint or leaving both enabled, neither the touchpad or touchpoint will work.
As far as I can tell from what I have been able to diagnose, the touchpad is damaged and is causing a conflict with the touchpoint when enabled. I am not sure of this, but it is my belief now.
Are there solutions out there for me? I do have 2 months left on my warranty, but I hope to keep mailing my notebook in for support as a last resort.
thank you,
steve

xyster wrote:
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
If you are ready to reinstall Windows, try this method:
http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/My-X220t-Clean-Install-Method/td-p/6612...
If after that your trackpoint/touchpad still don't work, I think one of them (or both) is defective.
X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1

Traceroute does not work properly with IPMP

I know this question has been asked many times but i didn't find any solution for it. Traceroute does not work with IPMP configured as intended.
i have following interfaces configured on my system
nxge2: flags=201000842<BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 0.0.0.0 netmask 0
groupname test
ether 0:14:4f:c0:1c:a
nxge2:1: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 10.63.20.30 netmask fffffe00 broadcast 10.63.21.255
nxge2:2: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 10.63.20.29 netmask fffffe00 broadcast 10.63.21.255
nxge3: flags=201000842<BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 5
inet 0.0.0.0 netmask 0
groupname test
ether 0:14:4f:c0:1c:b
now if i do
#traceroute 10.63.20.29
traceroute: Warning: Multiple interfaces found; using 10.63.20.30 @ nxge2:1
traceroute to 10.63.20.29 (10.63.20.29), 30 hops max, 40 byte packets
1 10.63.20.29 (10.63.20.29) 0.124 ms 0.036 ms 0.033 ms
it uses nxge2:1 interface instead of nxge2:2 and if disable the IPMP on nexge2 it works fine as expected
# traceroute 10.63.20.29
traceroute: Warning: Multiple interfaces found; using 10.63.20.29 @ nxge2:2
traceroute to 10.63.20.29 (10.63.20.29), 30 hops max, 40 byte packets
1 10.63.20.29 (10.63.20.29) 0.120 ms 0.034 ms 0.030 ms
Why is it so and how can i make it work with IPMP

Please refer to my reply in this post:
https://forum-en.msi.com/index.php?topic=252404.0
If you installed the proper Realtek HD audio driver, you should be able to find this.

My Nokia N9 does not work properly with a camera a...

Hi guys! Some time ago I noticed that when I turn on the camera, a message appears "CAMERA NOT RESPONDING Close application?". Shortly after the camera is turned on. Almost is the same with the maps apllication. The message is "MAPS NOT RESPONDING Close application?", but the difference is that it does not work at all. Has anyone had such problem?

Thanks aspergerduy! Of course it was the first step which I made, but unfortunately it did not work. Anyhow, I read some discussion in the Forum and finally I fixed the problem. It seems that the problem is well known. Now my N9 works but I don't know how long it will be. Frankly speaking during reading the discussions I didn't expect so many problems incur by this phone set! It is so pity ...

Adobe Audition does not work together with Audigy sound cards.

Dear friends, pleasae, help. I use Adobe Audition sound processing program, my sound cars are of the Audigy line. Recording control does not work, a known bug, says Adobe. Play control works fine, but I'd like to make quality recordings. Something is not O.K.with the ASIO system, I figure. The case is the same with PCI as well as PCMCIA Audigy products.
Tell me, please:
-Is there a patch or workaround to fix this problem?
-If not Audigy, what sound cards then?
Getting help from Adobe isn't quite simple, but maybe, Audigy fans know better.
[ordas]

If you mean the recording source/level control in Surround Mixer (etc.) ... it is not working because of it's bypassed by the ASIO driver ... so, it's not a bug but normal behaviour. You just adjust the recording level in Audition (or in any other software). Normally you need to select
- "AnalogMix()" input port option for analog line sources like Line-In, Audio CD, AUX-In, etc.
- (Mix L and Mix R are equal w/ the famous "What U Hear" ...
- S/PDIF for digital input
- etc.. here are some reading on Creative Audigy ASIO matter -
http://forums.creative.com/creativel...essage.id=1726
Remember also set monitoring properly in software so you can hear what you're recording. This is normally set through a tiny 'speaker icon' found in every tracks header ('settings options').
BTW, if you check the "Wave" source channel/slider when running in ASIO mode, you'll find out that it won't work either (it's all the same if you mute it). This is normal behaviour too, even when working in WDM/KS (Kernel streaming mode (or w/ Asio4All (which uses WDM/KS functionality))) ... it's just because of the kmixer is being bypassed ...
jutapa
Message Edited by jutapa on 12-14-200601:07 AM

System restore not working, even with recovery disks

I have a Touchsmart Tx2 1020us. I want to completely restore it to factory settings.
when i use the recovery manager it pops up saying that there isn't a recovery partition and to insert disk #1. i bought the recovery disk set from HP and put disk 1 in. it then says to click on next. when i click on next the computer just shuts itself down. it never restarts, just turns itself off.
i also tried using the "press f11 repeatedly at startup" method. after pressing f11 a ton of times my computer just begins this shrill beeping sound and will not stop until you stop pressing f11.
so basically i've tried every method on this page :http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00809678#N554 with absolutely no results.
any ideas on how to get this stupid system restore to work?

Hi,
Since you deleted your recovery partitions and your recovery disk set has issues you will need to purchase a set of recovery disks from HP or from an HP Partner. the cost is around $25.00 USD.
It is unfortunate, but when you deleted the recovery partitions you limited the options that were previously available to you.
Nonexistance or modification of the recovery partition is the reason that neither F11 from startup nor Recovery Manager from within Windows does not work.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Splitting does not work on a networked drive.

My iPhoto Library is on a following networked drive connected by cat6.
Linux:CentOS 4.2+samba 3.0.10-1.4E.12.2.
In this environment, splitting photos does not work. When splitting photos, initially photos are splitted into two events. Then I change a event's name from 'untitled event' to something.
After that, new directory is created automatically to store photos of new event, and then photos of a new events are moved into this new directory. However, in actuality, new direcotory was created and was renamed, but none of photo was moved from an original event directory into a new directory. As a result, iPhoto lost links for these photos, and I can't access these photos any more.
I think permission of iPhoto Library is correct. Because I can add, edit and delete photos manually within iPhoto.
As a workaround, I create a new event first manually, and then cut & paste photos into that from an existing event.
According to posted topics in this forum, it seems that iPhoto contains a problem when iPhoto Library is stored on a networked drive. Is this also an issue that only Apple can fix...?
Any hint would be grateful.
Thanks in advance.

My problem was also solved. The root cause of this problem was ':'. When splitting events, iPhoto attempts to create a folder named like '2007:08:16' temporarily. In my case, as I described my Library was stored on a Linux Server via the Samba. But the Samba refuses a folder name which is including ':'.
That's why, iPhoto was not able to create this temporary folder.
To solve this problem, you have to throw the Samba away and use another file sharing architecture. I decided to use netatalk. Netatalk can accept ':' as a folder name.
I already installed the netatalk on my Linux Server actually and tried splitting events. As a result, iPhoto was able to split events as expected.
FYI:
From my understanding, most of NAS products are using the Samba as their architecture. People using NAS has a possibility to face this problem.

C5 time does not work, even with network based tim...

Similar Messages

Maybe you are looking for