C50-A-1DV Windows 10 Unable to install DTS Sound
Hello, after upgrading to Windows 10 (Which the software upgrade page reports as supported), I am unable to install drivers for DTS Sound, which was installed before I upgraded, as the installer comes up with "This product does not support DTS sound processing", despite the fact it worked fine with Windows 8.1. Is there a fix/different install for this, as I am unable to play sound on my laptop now.
Satellite C50-A-1DV (PSCG6E-08P01CEN)
Watch this site for a Windows 10 version.
Similar Messages
-
iTunes update 11.1.4 for Windows: Unable to install or open. if 11.1.4 is uninstalled, will my library contents be lost?
You don't need to open iTunes to back up the library. See Troubleshooting issues with iTunes for Windows updates and look in the further information area for backup advice.
tt2 -
Apple recomments uninstalling and installing iTunes and other Apple related software. Will I loose my data?
Thank you!Rather than using the Apple document as a guide, I currently recommend using the following user tip instead:
Troubleshooting issues with iTunes for Windows updates
Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.) -
TS5376 iTunes 11.1.4 for Windows: Unable to install or open.
The fix does not explain why this has been done by Apple. very poor job. What will happen to my library? Will I loose everything, only some?
Why the update was released and not fully tested before?vito580 wrote:
What will happen to my library?
Normally nothing. Back it up.
vito580 wrote:
Why the update was released and not fully tested before?
I'm sure it was tested and that no potential issues with the release were detected. Something unexpected has occured.
See Troubleshooting issues with iTunes for Windows updates. Backup tips and other advice inside.
tt2 -
Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have?
Hello, hanliefromzaf.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iTunes for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Cheers,
Jason H. -
Is there a bug with the latest update to iTunes because I am unable to install it, I get constant error messages if I try to open it after installing
Hey there Mambo822,
It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
ERROR 7 WINDOWS ERROR 193 INSTALLING LATEST ITUNES PC
Getting error 7 windows error 193 missing or invalid odbc32.dll, get after installing and when open itunes. The itunes installing is the lastest from alpple. os is vista 64 and running itunes 64 installer. Have ran checkdsk and sfc and no problem in windows odbc files or any other. Hope you can help
Hello largoguy,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
I understand that you have already uninstalled iTunes, but when you get to this step, it is important to uninstall iTunes and the related components in the order listed in the link for that step. You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
I recommend the following article if you continue to receive an error:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Satellite C50-A-1JN - Windows 8.1 - desktop keeps attempting to reload
Satellite C50-A-1JN - Windows 8.1 installed pre-purchase.
Purchased this laptop about two months ago with no problems until tonight. The laptop loads fine up until the app home screen, but when clicking on desktop the laptop seems to attempt to 'reload' itself constantly, and I can't open any of the desktop files or do much of anything!
Has anyone suffered from similar issues and can advise of a fix? I can provide a video of what happens if this helps diagnosis/a solution.
Many thanks in advance.Hi
From my point of few the system is muddled up and i would recommend you to reset the Win 8.1 system to the default settings
This is not very complicated but before doing this, I recommend you to backup your personal data.
Microsoft has published short instruction how to do that. Take a look here:
http://windows.microsoft.com/en-us/windows-8/restore-refresh-reset-pc
I would recommend you to test the first option without affecting the files. In case this does not solve your issue, check the 2nd option: Recovery. -
Version 11.2 for Windows failure to install
I tried to update iTunes this morning for windows, 64 bit. When I tried to launch iTunes, I got this message:The prodecure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll.
I tried to reinstall the new version using the repair feature. Same results.
This was followed by a message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)
What is the problem?Hi Roland,
The article below has some tips that should help you get this sorted.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Resolution
These behaviors can occur if the iTunes installer has insufficient privileges to cleanly update iTunes. To resolve the issue, remove iTunes thoroughly, and then give the iTunes installer administrator privileges.
Follow these steps to resolve the issue:
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components, may have unintended affects.If you encounter an error while uninstalling, try repairing the affected component:
In Add/Remove Programs (Windows XP) or Programs and Features (Vista and later), select the component and look for either Change or Repair.
Click and follow the wizard to repair the affected component.
Remove the affected component after repair.
2. Verify iTunes and related components are completely uninstalledIn most cases, removing iTunes and its related components from the Control Panel will remove all supporting files belonging to those programs. To fully resolve these issues, manually remove any remaining iTunes-related folders listed below.On 32-bit and 64-bit systems:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files\Common Files\Apple\Apple Application Support
C:\Program Files\Common Files\Apple\CoreFP
C:\Program Files\iTunes\
C:\Program Files\iPod\
Note: Follow the additional steps at the end of this article if you receive the alert "Cannot delete iPodService.exe: It is being used by another person or program" when trying to delete this folder. Some of the folders above may not be found on all systems.
On 64-bit systems:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\CoreFP
C:\Program Files (x86)\iTunes\
C:\Program Files (x86)\iPod\
Note: Follow the additional steps at the end of this article if you receive the alert "Cannot delete iPodService.exe: It is being used by another person or program" when trying to delete this folder. Some of the folders above may not be found on all systems.
3. Reboot your computer.4. Download the iTunes installer. When prompted to select what you want to do, choose to save it to your computer.5. Install iTunes.
Right click on iTunesSetup or iTunes64Setup.
Windows Vista, Windows 7, and Windows 8: Select the 'Run as administrator' option.
Windows XP: Select the Open option.
Finish installing iTunes.
-Jason -
iam unable to install the sound library on my garageband because its not accepting the password. am i getting it wrong here? isnt it the apple id password that its askign for?if not then what other password? please help! urgent!
You need the admin password you created when you first set up the machine. Just about every installer running under OS X will require you to authorize the installation by entering an administrator password - even software update requires this. You really should not forget your admin password, as it is required for many things in OS X since, unlike Windows, you often need to manually type in the admin password to proceed with an install or update (whereas Windows will take admin authority, if you are logged in as an admin, by simply clicking continue or yes).
If you cannot remember your admin password, you can reset it from the recovery CD that came with your mac - http://support.apple.com/kb/HT1274 -
Unable to install itunes in windows 7 64 bit - hanging
Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
Also i am unable to uninstall Apple update software. Are these both related.
Now how do i get the software installed( itunes installed in windows 7)Hey gigipramod,
Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
Unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64
I am unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64 bit.Basically installation rollback on Win 7 64 bit image.
MSI Log File :-
Property(S): ProductToBeRegistered = 1
MSI (s) (5C:D4) [17:59:21:784]: Note: 1: 1708
MSI (s) (5C:D4) [17:59:21:784]: Product: Adobe_CreativieSuite_5_MNT -- Installation operation failed.
MSI (s) (5C:D4) [17:59:21:784]: Windows Installer installed the product. Product Name: Adobe_CreativieSuite_5_MNT. Product Version: 1.2.0000. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
Please let me how to install 64 bit package on Win7 64 bit.
Thanks in Advance.Ok so I downloaded the most current installer CS5.1, My previous installer was version 5.0. It did install fine fully updated to my license version. I just wanted to update in case anyone in the future has a similiar experience. Too bad this advice was not offered by the "experts" here.
-
Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS
Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.Hi,
I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2053898239
Start time: 2015-02-08 23:03:01
End time: 2015-02-08 23:07:31
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: RLC_WORK
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012
Client Tools Connectivity 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools Backwards Compatibility 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools SDK 1033
11.2.5058.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033 Express Edition
11.2.5058.0 No Yes
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition: Express
Slipstream: True
SP Level 2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title: Service Pack 2
Knowledge Based Article: KB 2958429
Version: 11.2.5058.0
Architecture: x64
Language: 1033
Update Source: Slipstream
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RLC_WORK\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: Slipstream
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix -
Unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1
Apologies if this is not the right place or this has been posted before (I looked and didn't find anything)
I am unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1, as I get an 'Operating System not Supported' error message right away.
What can I do to get this working?Hi Zgreve,
Usually, from
hardware and software requirements for installing SQL Server 2014, we can install SQL Server Express version on the Windows 8.1. For more information, see:
Microsoft SQL Server 2014 Express.
Before you install SQL Server 2014 Express version, you should ensure installing the .NET Framework 4, then run as administrator for the SQL Server setup.exe again.
There is a similar detail about install SQL Server Express LocalDB via GUI and command line. You can also review the following steps.
http://www.mssqltips.com/sqlservertip/2694/getting-started-with-sql-server-2012-express-localdb/
If the same error about OS still exists, I recommend you submitting a feedback to Microsoft such issues at
https://connect.microsoft.com/SQLServer/Feedback, Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the
exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Unable to install Sql Server 2008 R2 express on windows 2003
Hi,
I am unable to install sql server express edition with management tools, on windows server 2003. During rules check, it gives an error that minimum os version is not supported.
.net framework requirements have been met.
Is there something that I am missing ? Any pointers would be of immense help
thanks
SaagarHello,
Whats is Service Pack edition of Windows 2003 server.As per prerequisites it requires SP2 for windows Server 2003 I guess your server is not updated to latest SP.Please refer below link for hardware and software requirement
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx#SSE_x64
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Maybe you are looking for
-
BMW iPod adapter: Problems after 1.2 update
I have the BMW iPod adapter, my pre Sept 5G 30GB iPod, will skip, if the radio is turned off while listening to the iPod. Then when you turn the radio back on or start the car, it skips It will play for a second the silence, then play then silence. T
-
How we calculate the date difference between two list in SharePoint 2010
Hi friend's....I have two list first is list1. In this list i have two coulmn start_date and End_date. In second list2 i have two column HolidayName and Holiday_date. Now i want two find the number of day in list1 Excluding Weekend and Holiday_date(t
-
Use of &, or in web services
We are using web services to interface accounts, opportunities, etc to our legacy applications. I wanted to confirm, do I need to do anything special if my in house legacy application has a company with the name "A & B Inc", "Alpha > Bravo Co", etc a
-
hello all-- this has been bugging me for a while: vector line weights not scaling properly in .pdf's (when viewed on screen in reader, preview, etc). My workflow is usually from illustrator to indesign for layout, then export to .pdf--and the fina
-
How do I download plugin or just open RAW files?. Canon 650D and elements 10
How do I download raw files in elements 10. PSE10 says I have Adobe camera raw plugin but nothing happens.