C5001 Chip on MSI 845 ULTRA Ver:1 Board

I messedup and burned a component om my motherboard its located near the CPU and the name on it is C5001.
Does anyone know where to get it ?
Mail me if you would like to see a picture of it
Regards Henrik, Sweden :P
[email protected]

Thank You!
I checked the BIOS and it IS a retail board (BIOS V 3.11.00.8).
I should be fine using the USB BIOS flash tool right? Also, my thumb drive is a Sansa Cruiser. It's FAT 32, but It also has the U3 software on it. Can I leave that on there, or should I remove it?

Similar Messages

845 ULTRA Ver:1 Mainboard, Live Update Online, USB 2.0 problems

I have a MSI 845 ULTRA ver:1 mainboard (actually have 6 of them.) I installed a USB 2.0 5 port hub and connected a 250gb external harddrive. The system reports an I/O device error. Any ideas on how to solve ?
The current BIOS is AMI 1.50a. I tried using the "Live Update Online" but only got as far as the "Now Loading" screen. Anyone know how to get past this point ?
Any help would be appreciated.

Quote
The current BIOS is AMI 1.50a. I tried using the "Live Update Online" but only got as far as the "Now Loading" screen. Anyone know how to get past this point ?
Try not to use MSI Live Update. It is not the best Tool that was ever released and too many users have already messed up their systems (bad flashes, wrong BIOS) using MSI LU. If it starts behaving strange before you even get to the point of actually flashing a new BIOS Version, you should not hesitate to stay away from it.
Do it the "DOS-way" and use a floppy or a bootable USB-stick.

MSI 845 Ultra: USB20 not detected in WinXP

Hello,
Recently I bought a computer based on a MSI 845 Ultra board (USB2.0 + RAID) I'm using WinXP Prof. als desktop O.S. Everytinh seems to work fine but the USB2.0 controller is not detected. Is there in the bios some thing that I should enable ? Do I need somekind of extra driver so that it can be discovered. The USB1.1 controllers are working fine; no problems! :P
Who can help me ?
Extra Info
MSI 845 Ultra (USB2.0 + RAID; MS6398
BIOS version 3.6
Windows XP Prof + SP1

Hi,
USB 2.0 is supported through external NEC chip.
This infos I found on MSI web.
NEC USB 2.0 Driver
Support model K7T266 Pro2-RU (MS-6380 Ver2.0), 845 Ultra-ARU (MS-6398)
Description
Add General ID: VEN_1033&DEV_00E0
-- Driver version: 2.0.3300.20300.
For K7T266 Pro2, this driver must be used together with BIOS Ver3.3 or after.
Note: For WinXP, please use Microsoft Windows Update to download driver from Microsoft or aquire the latest service pack
WinXP SP1 Download Website :
http://www.microsoft.com/windowsxp/pro/downloads/servicepacks/sp1/sp1lang.asp
Date 2003-4-28

Help needed pls!!! GF4 Ti4800 SE 8X on MSI 845 Ultra?

Hi folks,
I just purchased a GF4 Ti4800 SE 128mb 8X.
I own a MSI 845 Ultra ARU (6398), I understand this board only supports up to 4X AGP, but the GF4 card should be able to "downgrade" to work with a 4x motherboard, I hope.
Booting up is ok, but graphics start to tear on the window start-up screen. At the desktop, once i click the mouse, the desktop will hang like for 1 sec, then the monitor switch to Black screen, and then back desktop, this repeats when i click the mouse. There are also some weird colors here and there.
Can anyone pls advise?

Quote
Originally posted by wonkanoby
serious vga card,is your psu in the same bracket
Hi there, thanks for ur prompt reply :D
hmm, sorry i don't realli what you mean by "psu in the same bracket"?
My PSU is a HEC 475W.

Upgrading to a MSI kt4-ultra FISR board.....

Currently I've got a gigabyte motherboard and I want to upgrade to an: MSI kt4-ultra FISR board. Can I just pull my old board out and install the MSI board with all my old hardware, O/S already on harddrive - and do a start up, or will I run into errors and problems when I try this? Currently my system looks like this:
1) Case: "Xaser SC5000BWII" 400watt mid-tower case
2) Motherboard: Gigabyte GA-7DXR DDR+Raid
3) CPU Chip: AMD Athon XP 1800 1.6Ghz
4) Memory: 512 of PC2100 DDR266 Memory
5) AudioCard: Creative SoundBlaster Audigy MP3 card
6) VideoCard: ATI RADEON 9000pro, 128 DDR
7) Hard Drive: Maxtor 80GB 7200RPM ATA-133 "D740X" Mdl:6L080J4
8) Operating System: Ms Windows XP Pro
Thanks for the help........ seboyd ?( :D 8)

A clean install will give you 30 days to reactivate and it only takes a 5 minute call to get the new #s. Pretty simple and much easier than trying to straighten out all the error codes from old O S. I did however move an XP harddrive from a Turbo2 to a KT4 without a new install but they were both MSI boards. A clean install also gets rid of all the junk that accumulates. Just enter bios and make the CD rom 1 st boot . BIGDADDY51 CT. USA :D 8) :D

P4 Northwood 533FSB on an MSI 845 Ultra ARU

Just got a simple question here. Have not been able to find an answer anywhere, so thought I would ask. Does the MSI 845 Ultra-ARU support the P4 Socket 478 533 FSB proc? I was running a 478 1.6 @ 2.1 on it, and wanted to get the pops a 2.4 to run on it, so he would not have to overclock. Game him the board, and Alpha, vid., and memory, and wanted to polish it off with this proc to get him off of the old 700 Athlon (just isn't right to keep yo dad @ 700 when you have 2 @ 2.1 :D ).
TIA for the input.
Darrell

Doesn't support 533mhz FSB cpus. Only 400 but up to 2.6ghz. You can get your Pops a 2.4ghz 400mhz fsb cpu.
http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=34%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6398

Help with motherboard MSI 845 Ultra-C

Hello, I have a problem with this motherboard:
When I connect something in the PCi slot, Windows recognize there are something there, but i can´t install it because it can't recognize the drivers. I tried to change the slot, I have installed the last drivers of the motherboard and there is no way to use the PCIs slot. All the things I have tried, works perfectly in another computer, i have the original drivers and they have work time ago. If anyone can help i'll very very pleased. Thank you!
edit: I have made a clear CMOS and it doesn't work
Forgive muy English, but i`m spanish.
In Spanish:
Buenas tengo un problema con mis puertos PCIs de una placa MSI 845 Ultra-C.
Cuando conecto algo a un puerto PCI (en concreto una tarjeta avermedia con sus drivers de casa, una tarjeta de red Realtek con sus drivers y otra tarjeta de red conceptronic c100i probadas en otros ordenadores y va perfecto) windows me dice q se a detectado un dispositivo pero nunca puede llegar a localizarlos, y ya creo q no es de los drivers. Sabeis de que puede ser?
Ya he probado a quitarlo y ponerlo en todos los puertos cada cosa por separado, han funcionado en este pc alguna vez tambien y ahora no van. Muchas gracias por su ayuda
Edito: Tambien he actualizado la placa base con los ultimos drivers q existian

Quote from: Frankenputer on 25-January-08, 06:34:20
Would you please post what is in your system, including the Power Supply (manufacturer, multiple +12V rails or single +12v rail, and the amps on the +12V rail(s)). Please include the full specifications of your system(including the operating system). Look at my signature below to get some idea of what we'd like to know.
INTEL Pentium 4 1.6Ghz
256 MG DDR ram KINGSTON, 1 SLOT
motherboard MSI 845 Ultra-C VER:1
power supply: HipoMedia, model:ATX-250PCC12,
AC INPUT: 115VAC 7A 60Hz 230 VAC 4A 50 Hz
DC OUTPUT: +12V 13A 250W MAX
-12V 0.5A 250W MAX
NVIDIA GEFORCE MX400 VGA BIOS
HD: SEAGATE 40GB 7000rpp
DVD- LG 4120B
network card: conceptronic c100i
Avermedia AVerTV 103
windows XP Proffesional: including all sp2 updates.
I have already tried with windows XP Home Edition, windows 2000 Proffesional and Windows 98 Second Edition.
This is the information i know, if you need more, the audio is from the motherboard. Thank you again!

MSI 845 Ultra-ARU cannot boot up!!!

i had bought the board for a year.. everything works well... but recently, whenever i on the pc, the D-Led wii show #1, #2, #4 all red, #3 green.... then i flip through the manual book. there stated that it is "initializing keyboard controller"... what does that means??? it there going do to with the bios or the keyboard, or the MB????('?(')
P4 1.5 GHz
MSI 845 Ultra-ARU
Kingston 256 MB PC2100
IBM 40GB HD
Elsa Gladiac 511
Logitech Keyboard & Mouse

Pull out the power cable from the wall (AC 220/110v)
Move the clear CMOS jumper to position 2-3 for a few seconds, then back to position 1-2 and plug the power back.
It's explaind in the manual.

MSI 845 Ultra - Fasttrack Error in w2k Events

Hello!
I have a little prob with my MSI 845 Ultra under Windows 2000 Advanced Server.
I installed W2K without problems, service packed, patched it, etc...
But I alway see an error in the System Event Log :
"The device, \Device\Scsi\Fasttrak1, did not respond
within the timeout period. "
That's a bit annoying :(
Does anyone already seen that ? What can I do to resolve that ?
Thank you in advance !

Hi,
since this board is an Intel board, this topic is moved to Intel forum.

MSI 845 Ultra - Ram probs

I have just recently purchased a MSI 845 Ultra with RAID...it seems my 3rd memory slot does not want to accept ram. I have tryed 2 different models of working ram and each time i try to boot up my system will not post, it powers up but the hard drive light stays light and it does not post. i dont know if this 3rd slot is defective or what. just wondering if any else has had the same problem or maybe i got a faulty board. ?(

Quote
Originally posted by Bass_Player69
I have just recently purchased a MSI 845 Ultra with RAID...it seems my 3rd memory slot does not want to accept ram. I have tryed 2 different models of working ram and each time i try to boot up my system will not post, it powers up but the hard drive light stays light and it does not post. i dont know if this 3rd slot is defective or what. just wondering if any else has had the same problem or maybe i got a faulty board. ?(
Check yr manual page 2-6 for full details ....
Intel Chipset i845D/E/G/GL ...etc can ONLY 4 DDR Memory bank.

Volcano 7+ on msi 645 ultra ver 1 . will it fit ??

well i want to get a thermaltake volcano 7+ A1254 for my p4 1.8a o/c to 3 Ghz on msi 645 ultra ver : 1 , but i heared that there is a problem between V7+ and msi 645 ultra ,they don't fit together ... is that true ,, please make things clear for me .....
thanks

The new ones are shipping with the new clip. Just make sure you don't get old stock. Contact Thermaltake about it - they sent me one free of charge.

MSI 645 Ultra-C vs MSI 845 Ultra-C

Can somebody tell me widh mobo from this 2 is better.
For the moment I use MSI 845 Ultra-C but I'm not satisfy by it.
Its recommend to change it with MSI 645 Ultra-C (MSI 645 Ultra) or not?
Thanks.

I don't think that MSI 845 Ultra-C its a good mobo, I had problems with it from the 1st day I have it. I change it once. I don't know what to say I don't see some performances from my P4, and I think the mobo its the problem here. Or maybe its because I have just an GForce 2 MX400 and 128 DDRAM?
Now I just install WIN .NET Webserver Edition and it seems to work fine, but with WIN XP Pro its not working at all. Maybe you give some advices because I really don't know what to do.
Another ideea that cross my mind it was to chenge it with MSI K7N420 PRO + Athlon XP 1600+. Is this a better ideea?
Thanks

MSI 845 Ultra-C and Western Digital WD1600BB

Hi!
I've got a problem with a MSI 845 Ultra-C based computer.
It worked before but there were problems with it's HDD and I wanted to install a new and bought a Western Digital WD1600BB. I connected the IDE drives like this:
IDE1: Western Digital WD1600BB (Master)
IDE2: Samsung Combo drive (Master) and the Other 80GB HDD (Slave)
The problem is that it doesn't detect the combo drive. When I push the button on it tha tray opens and everything looks nice except the bios. Before that the 80GB HDD and the combo worked well.
What should I do ? I would like to know if this motherboard can handle 160GB HDDs.
By the way this is my neighbours PC so please answer quickly if you can.
THX

http://www.msi.com.tw/html/products/mainboard/testreport_pdf/6566/hd.pdf
120 gb was biggest they tested so 137 may well be largest

MSI 845 Ultra C with sound card???

I recently bought a P4 2 Ghz with MSI 845 Ultra C, Geforce 4 Ti4200 128.
A few weeks later i bought a simple sound card with surround support. Now when i try to install this software (Xp compatible) i get the error that the sound card is not installed and that the data is incorrect. I use the latest drivers from the internet. I believe this problem had to do with the onboard sound card of the motherboard. Is there anyway i can disable that???

it is an XP bug, you might try windows update to see if MS fixed it.
Here is for example ATI's doumentation of the error.
I assume the bug won't be fixed by the update, so in that case you need to reinstall XP with the card already insalled in the slot.

Power supply for MSI 645 Ultra mother board

I need to replace the power supply for a MSI 645 Ultra mother board. I've available a switching power supply Allied model DR-B500E, that doesn't have the -5V output (infact its 20 pin ATX power supply connector has no wire in pin 18).
Can I use this power supply with the MSI 645 Ultra?
Thanks in advance for any help.

Hi, here I am. Sorry for delay but I had some problems with the PC (as NTLDR missing).
However now is ok and I can confirm that it runs ok also with power supply without -5V output.
Thanks a lot for the support and best wishes for Christmas and new year.

C5001 Chip on MSI 845 ULTRA Ver:1 Board

Similar Messages

Maybe you are looking for