C5280 All-in-one Main heading is "! Print Cartridges'

I tried to print a photo from an SD card and as I selected 'print' the screen started flashing and I was prompted to restart the printer. I did this and got a warning saying "! Print Cartridges" followed by "Refer to printer documentation".
I knew my colour ink was low so went and bought a new colour ink cartridge. It loaded fine and did an alignment page.
I tried to print from the SD card again and the same problem happened. Now no matter what I do I only get the "! Print Cartridges" screen warning come up.
Can anyone help please?

Hi Paul
Seem no one responded to your problem, I am pretty much does not like this particular printer, I run so many times with the same issue with you, and had to replace new cartridges again , it worked and re-used that silly old cartidges again, hipppoooo it worked. but the issue has never ended....at one stage , i just bought a cheap new printer .
But if you know the answer , please let me know cos 'am starting using that silly printer again and what , the same message pop up.
thank you

Similar Messages

HP5610 All-In-One and HP57 Inkjet Print Cartridges

New HP57 Print Cartidge says it fits my HP OfficeJet 5610. Printer shows error: “CARTRIDGE ERROR:Cartridge on Left is not intended for this printer.”
General comments I see on internet say cartridge will not work on this model. If so, why does the HP57 box say it is for the 5610???????

HP 5610 always reads cartridge error

HP Photosmart C5280 All-in-one Alignment Page message keeps scrolling

The HP Photosmart C5280 All-in-one display shows "No printing Alignment Page" scrolling for the last 30 minutes.
Also, suddenly, this printer is no long listed in my control panel.
I installed new cartridges about a week ago and they worked fine until this week.

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Scanning on my c5280 all in one printer-scanner-copier

since purchasing my lap running windows 8.1 I have been unable to scan from my all in one printer to my pc. all it allows you to do is to scan the document to a memory card or reprint the image

Hello , Welcome to the HP Community. I'd like to help you with the issue you are having scanning on your Windows 8.1 system with your HP Photosmart C5280 All-in-One printer. I would suggest installing the full feature software for your product. Fortunately, the full software suite is still available for download for your Windows 8.1 operating system. You can download the software here: HP Photosmart C5200 All-in-One Printer series Full Feature Software and Driver If the issue persists, I suggest trying to install the printer using the Windows Update. You can find all of the steps to do that here (under Step Two: Method Two): HP Single-Function and Multifunction Printers - The Printer Does Not Print in Windows 8 and is Listed as 'Unknown' or 'Unspecified' or Appears with a Yellow Triangle in the Devices and Printers Folder If you're still unable to scan after installing the printer using Windows Update, try downloading the HP Scan and Capture app from the Windows Store. Please respond to let me know if these suggestions helped to resolve your issue!

Photosmart C5280 all-in-one Cartridges error message

hi, I have a Photosmart C5280 all-in-one. It's been good until today when I got an error message:
! Print Cartridges refer to printer documentation.
I've only ever used genuine HP cartridges. I have the correct ones in - 75XL tricolour and 74XL black.
I've taken them out, reseated them several times to no avail, the error message will not leave and the printer will not function. Any ideas please?

Hi there Crouch11,
Welcome to the Forums
I noticed the issue you are having with your Photosmart C5280 now showing you an ink cartridge error. I suggest following the guide below to see if this can be resolved for you.
'Incompatible Cartridge' or 'Cartridge Failed' Message Displays on the Computer in Windows After Ins...
Feel free to reply with any issues you may have and I will do my best to help.
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Deskjet all-in-one F4440 will not print

My HP Deskjet all-in-one- F4440 will not print. I have put in a new color and a new black cartridge. It clanks loudly when it moves back and forth. Finally it stops and then pulls plain paper through as though printing on it - does this two or three times. then it pulls plain paper halfway through and stops. I have to tug and carefully pull halfway paper back out towards front to remove.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? thanks..

error code B81AA24C on my officejet pro L680 all-in-one ... can printer be fixed? how??? seems to not power up ...thanks..

Hello
Is it possible to do a reset on the unit? Via: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00841912&cc=us&dlc=en&lc=en&product=2512009&tmp...
To try to get it in default mode
Kind regards
Best regards,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Although I work for HP my posts and replies are my own .....

Any suggestions for an all-in-one "cable modem router print server" (N)

any suggestions for an all-in-one "cable modem router print server" (N)?

If that's a problem with your cable company, change the company.
If your cable company is not able to provide you with a cable modem which gets you full performance for their service why would you bother with that company or try to make it better than them?
If you subscribe to a 100 Mbit/s service they must be able to provide you with a modem that does 100 Mbit/s and be able to demonstrate you 100 Mbit/s on your cable.
If they are unable to provide you with a modem which does 100 Mbit/s and thus cannot demonstrate that the service they have installed in fact can do 100 Mbit/s but only give you a 50 Mbit/s because that's the best they have, why bother buying yourself a better modem to find out whether or not their service does what it promises or not??
In addition, an integrated device won't get you better performance. On the contrary, consumer devices are generally single CPU (and core) devices. It's usually running some Linux or similar. If a single process gets overloaded it can drag down the performance of the whole device. For instance, let's say there is a bug in the print server software of the router. You print something and it hangs and the print server process on the router runs wild. Now the CPU is fully loaded and the routing performance will go down. If there is a bug in the routing software it will bring down the whole device and you can't even print.
You'll get the best performance if you use dedicated devices because then one device cannot overload another. Get a modem. Get a wireless ethernet router. Get a printer with integrated print server. That's far better.
It's like the all-purpose audio device compared to components...

IHP F2210 all in one deskjet, need to print in black, but prints in color

My HP F2210 all in one deskjet, is having printing issues. When I set it to print in draft in black ink only, it then prints in color, I just don't understand WHY, can anyone offer assistance?
thank you
miricro

Hi there miricro,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP C5280 all-in-one printer will not print yellow

I tried cartridge replacement. Update driver, and clean head. Nothing works. I had this printer in a box for three years without using. Now It will not print yellow or green.

Happy Monday edam. Green is actually the result of two or more color mixed together. Lets try printing a self test report:
Make sure the All-in-One is on and loaded with unused, plain, white paper.
Press Setup . The Setup Menu appears.
Press the down arrow button to select Tools , and then press OK .
Select Self-test Report , and press OK . The self-test report prints.
Let me know the results of the self test. Are all the colors present on the self test or are you missing specific colors?
Thanks!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP C4385 All In One is the worst printer I've ever bought

I will never buy another HP printer or other HP product for the rest of my life. I purchased a HP C4385 Photosmart All In One printer and it has been absolutely terrible from day one. First when installing it screwed up my LAN so bad that I had to spend hours on a live chat with Lynkys to get my network up and running. HP software would automatically delete my current network to establish its own for the wireless printer connection. After many attempts I gave up on trying to connect the printer wirelessly, which was one of the main reasons I bought this model.
Somehow the printer's software and drivers mysteriously delete themselves because I've had to reinstall the software and drivers around 15-20 times. When I go to use the printer, it will show it as a new device and that I need to install the software and drivers. This isn't a problem with my computer. It doesn't happen with any other device I use- other printers, camera, flash drives, etc. I have downloaded any updates but they do not help.
The monitoring software is constantly running with 3 or 4 HP process running at all times using up my RAM. The alignment is constantly off and when I go to align it gives me another nonsense error message because it doesn't acknowledge the alignment paper.
To top it off, after using about half the ink in a cartridge it won't print anymore because it says the print cartridge is missing or empty when I know its not. I have tried every troubleshooting tip offered and none of them work.
I am sure this will end up in another {Content Removed: no legal discussion permitted} due to faulty equipment knowingly being sold. I don't want my money back, I want the 50 hours I have wasted dealing with all of the {Content Removed: Language Filter Evasion} this printer has caused me.
Thanks a lot HP for selling me a piece of junk device. I used to respect you and the products you sold. Not anymore I will purchase another HP product because of the frustration this one has caused me.

I fully agree with this complaint. Curiously, I have faced similar problems like him. Frequently, I have seen the messages like "paper jam ", "Cartridge missing" while there wasn't any paper jam and genuine brand new cartridges were already installed. My experience is worse than his. I could hardly use it for more than one week! What is worse the wireless operation could never be achieved. Now this printer is lying discarded.
It really beats all logic that why should one not be able to scan a document (say -- to save the image on the hard disk for possible future use) even if there was so called paper jam or missing cartridge?
Also, it is virtually impossible to delete any job once you have clicked the button print. The printer would keep on retaining the job, making the printing of other jobs impossible, unless perhaps you uninstall it and then re-install! Why can't HP find a solution to this problem?
I join his sentiments that I would refrain from buying any HP product in future.

HP Officejet 6500 All-In-One 709n Won't print black

I am using a 6500 wireless printer. The printer has been in storage for 5 months. The cartridges were removed and placed in my refrigerator. Upon reinstalling the cartridges the printer seemed to print; but there was no ink on the paper. I cleaned the print heads several times. The level of the color cartridges went down significantly; but the black cartridge did not. I replaced the black cartridge with a newly purchased one. The problem persists. Test pages show all the color but no black. The Copy/Black button gives the same results. That is: the printer appears to print each line but no ink gets to the paper. It is blank.

I too suddenly cannot print with black ink. i replaced the colored and black cartridges. I am getting colored ink. I have tried numerous solutions offered on the internet including, wiping the print head, saoking the print head, running multiple printhead cleaning cycles via my hp6500 officejet all inone printer. i have now spent better than a half day on this issue and consumed nearly all of the new colored ink! on occasion i would test the black ink and get one short email to print in black. the subsequent test minutes later only a blank page or text so faint it could not be read.
several months ago i had an issue with no printing...cleaned the print head and it seeems to have worked fine until now.
what options are left? i have spare new colored cartridges i hate to throw away if i need to buy a new printer. my printer is 4 yrs old though only used for the last 3 as it was in storage for nearly a year.
are there new hp printers using the 920 cartridges?

HP Officejet 7410 All-in-One no longer 'automatically' print double sided

After upgrading my PC from Windows XP 32-bit to Windows 7 64-bit my HP Officejet 7410 All-in-One printer no longer prints double-sided automatically. When sending something to print I am presented with only two options: Print One-Sided or Manually Print on Both Sides. If I choose the latter I have to manually reload the paper when prompted. I have tried searching for updates and downloading drivers but nothing has resolved the problem. I've even gone into printer properties printing shortcuts and changed the settings in "Print on Both Sides" to 'automatically' and still I am prompted to reload the paper. It is a real pain when I have to print a very large slide pack especially when the printer decides to pick up two sheets at the same time. I have spoken to HP and they say my printer is old and they cannot help me. It is about 8-10 years old. Any advice would be gratefully received.

Hello Toosweet
In Printer Preferences make sure the duplexer is enabled. Do you have the full feature software installed?
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

I have a iphone 5c and a wireless computer hooked to a usb wireless printer Hp4215 officejet all-in-one how can I print from my phone to the printer

How can I print to my wireless Hp officejet 4215 all-in-one printer that is usb in line with my computer that uses windows 7 from my Iphone 5c

there are 2 ½ ways to print
1. the printer support AirPrint and it works out of the box
2. one get a printing app from app store which support the printer
2-½ one get the free software from netgear called netgear genie which will make the computer display all printes it's know act as AirPrint printers
no other things in the known universe will make printing possible

Can't get HP Officejet J6450 All-in-One to scan or print

Hello!
I have an HP Officejet J6450 All-in-One which I would like to use with my Macbook Pro running OS X 10.6.4. I would prefer a wireless setup. It printed wirelessly up until I tried installing the HP Full Feature Software & Drivers from their website (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-74787-1 &lc=en&dlc=en&cc=us&os=219&product=3635399&sw_lang=)and subsequently deleted them once I realized it did not work. I also did not want to install a bulky and unnecessary set of programs that I do not need.
I went to the System Preferences/Print & Fax and deleted the HP printers that had been added, then I went to Applications/HewlettPackard and clicked on HP uninstall, and uninstalled the program. Since I have experience with Windows (lol), I decided to take the safe route and make sure my HD & permissions had not been corrupted. I put in my OS X install disk that came with my Macbook Pro, rebooted to the disk, went to Disk Utility and Repaired the Permissions (it only had one that it could not fix), repaired the HD (it found a few issues), and then went one more round of Repair Permissions and then HD just to be sure. I rebooted to the HD and ejected the boot disk. I connected the printer via the USB cable.
Then I found this: (http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&softwareitem=mp-7 4787-1&os=219&product=3635399&sw_lang=&docname=c01910186) It says on there that Snow Leopard should have everything I need to scan and print with this printer. However, upon trying the three methods, none worked. Here are the results:
Method One: I get to step 2, select Import from Scanner, and nothing happens. The list that is supposed to be displayed in step 3 never comes.
Method Two: I open the Image Capture app in step 1, but when it comes up, it says "No camera or scanner connected."
Method Three: I get the Print & Fax printer browser opened as in step 3, but cannot move on to step 4 because there is no scan tab.
What can I do to get this to work? I tried contacting HP online chat, but they told me they do not offer support to Mac users on there. I sent them an email through their contact page but you know how that will probably go...
I'm an intermediate computer user, although I'm relatively new to Mac, so be easy on me! I'm scared to break this laptop I've fallen in love with. Many thanks to you all in advance, and my apologies if this has already been answered elsewhere - I was unable to find anything with this particular HP model and situation. I noticed HP does not seem very Mac-friendly!

Is this scanning from the PC and/or from the printer? Did it ever scan previously? Is this connected by USB/wired/wireless?
As far as the software, it would be a good idea to update your software, and I would recommend downloading the latest software at this location:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153494&lc=en&cc=us&dlc=en&lang=en&cc=us
Just pick the right operating system, and get the download and run it. That may fix the scanning issue you are having.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

C5280 All-in-one Main heading is "! Print Cartridges'

Similar Messages

Maybe you are looking for