C6-00 Display problems when i slide the keyboard

since yesterday my mobile when i slide the keyboard... the transition between the main vision to panomaric...  do not happen or be pixelized and do not show any image... i reseted th phone and i have the same problems... other times when i slide work but i need to make many things .. why this happen... have a nice day.
Oh NO! Run!!! It's the C6-00!! " NHOM NHOM NHOM"
Solved!
Go to Solution.

in this right moment i have a black line at the middle with letters shaking appearin and not appearing... errmmm now i know what happen with my mobile, i have it for 6 months its on warranty... But this mobile is freeking me out a little bit for many problems that it have... Its weird something goes mad when i care my mobile with very caution... It never felt and never been exposed to humidity... But ive seen that is about flex problem some times... Other i do not use and shake in the same way. Care point of nokia... Again.
Oh NO! Run!!! It's the C6-00!! " NHOM NHOM NHOM"

Similar Messages

  • I just received a iPod Touch 5th generation for xmas and it acts like it is locked, when you slide the slider it says unlock button and nothing happens.  Can't slide the power off either.  It tells you the time, unlock button, power off button but nothing

    I just received a iPod Touch 5th generation for xmas and it acts like it is locked, when you slide the slider it says unlock button and nothing happens.  Can't slide the power off either.  It tells you the time, unlock button, power off button but nothing happens.  Voice just tells you the unlock button, time, poweroff button.
    Please help also itunes says I need to enter on iPod the passcode to reset to factory.  I can't get it open to enter passcode, slider doesn't work.  It is one day old and this happen xmas afternoon.  PLEASE Help someone

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it. I've tried restoring it and restarting it but nothing seems to work.

    I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it and I can not get out of the home screen. I've tried restoring it and restarting it but nothing seems to work. I've tried everything, is there anything I can do myself to fix it?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Keyboard plugs into the back of my display does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

    My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

    Try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Resetting network settings: Setting>General>Reset>Reset Network Settings

  • Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • Why exchange rate is not displayed correctly when I create the PO in SRM?

    Hi Gurus,
    Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
    But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
    Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
    But when the PO is transmitted to R/3, the exchange rate is the correct.
    My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

    Hi Muthu,
    I'm in Extended classic.
    I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
    Two checks of budget exist:
    1.- When creating PO (exchange rate date of delivery date of the SC's item)
    2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
    If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
    Now my question is: It is a standard behavior? (to take different exchange rate)

  • HT4623 My iPhone 4 wont connect to iTunes th iPhone is on iOS 6 screen and when I slide the bar across it come up with connect to iTunes and the phone come up on iTunes but it won't load what do I do

    When I connect my iPhone to iTunes it's say we're sorry we are unable to continue with your activation at this time and its be 2days and still doesn't work. And on my iPhone it has IOS 6  screen and when I slide the bar across it says connect to iTunes what do I do

    Hi Genoc728,
    Thanks for visiting Apple Support Communities.
    If your iPhone is unresponsive and can't be turned off, you can reset it. See this article for the steps, and other helpful troubleshooting tips for an unresponsive device:
    http://www.apple.com/support/iphone/assistant/phone/#section_1
    Regards,
    Jeremy

  • There is a problem when i click the "+" tab to "open a new tab" nothing happens. It use to open new tabs and now it does nothing.

    There is a problem when i click the "+" tab to "open a new tab" nothing happens. It use to open new tabs and now it does nothing. Even when i go to "File" and "New Tab" it still does nothing. The only time i can get a new tab to open is if i go to "Help" and click "Firefox Help" then a new tab with firefox help opens.

    Hi, were you able to resolve your problem? If so, please mark this question as '''Solved'''. Thanks !

  • I have a problem when I open the new tab?

    I have a problem when I open the new tab. Normaly, I open the new tab as click mouse in button near to last page. " new tab" appear with untitled page. But now , It always appear with web sites wich I don't like. So, How can i repare this problem ?

    This feature is likely to have been added by an extension. Check the settings for your extensions to see if they show this feature.
    Another method of identifying the extension that is causing this is to disable extensions, for details on this process see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I have a problem when you update the iPhone

    I have a problem when you update the iPhone does not complete the update and the bar that appears in the top of iTunes (restoring iphone software)

  • I have a problem when I run the DTP

    hello
    the day before , I load  data in a PSA "MASTER DATA" mode full,
    then in the morning  I load data again this "MASTER DATA."
    I can see  that the same lines do not not present a problem but the lines were changed, i have a problem when I run the DTP?
    I get this messages errors:
    .« the time interval & (from/to) for the data
    ecords 1 & and 2 & overlaps in characteristic 0COSTCENTER &.u201D
    u201CMessages for data records saved; request is red acc. to configurationu201D
    best regard
    francoise dinatale

    As this is a master data load, the attribute change run is mandatory before performing the next load.
    The probable reason for this is in the master data table there is an entry for a characterisitic value and the load resulted in another value. The difference between these two records is the object version. Exisitng record will have A version and the changed record has M version.
    So when we active master data(attribute change run ) then M version overwrites A version and hence on a net we have only one record in master data table.
    Post the above task if we again load master data, as is in your case, then the record will find its place in M version.
    As the activation is not performed(probably), the system finds it difficult, with previously loaded M version and currently loaded M version and hence the reason for the message.
    Naveen.A

  • My iPhone 5 don't open when i slide the screen, My iPhone 5 don't open when i slide the screen

    My iphone 5 don't open when i slide the screen. It does nothing at all. It's just 3weeks since i used it.

    Reset, hold both home and power buttons until the iPhone begins to restart itself, ignore the "slide to power off", let the iPhone restart itself. Usually take about 10 seconds of holding both buttons.

  • Problems when user enter the field

    I have problem when user enter the field, but it cannot retrieve from the table. Below is my program, help me to check is it correct or not, THANKS
    <input type="text" name="po_num<%=i%>" style="width:100%;text-align:left;" onChnage="chkPOexist(<%=i%>)">
    Function chkPOexist(i){
    if documen.all.po_num.value == null {
    alert ("PO cannot be null");
    else {
    po_num = new String;
    po_num = eval(document.po_num[i].value)
    alert(po_num);
    <% System.out.println("PP " +po_num);
    sql_query = "SELECT po_num"+
    " FROM pomast"+
    " WHERE po_num '"+po_num+"' ";
                        try{
                        rset = db.execSQL(sql_query);
                        catch(SQLException e) {
                        System.err.println("Error in query");
                        while(rset.next()== true){
    po_num = rset.getString("po_num");
    %>
    </select value="<%=po_num%>"><%=po_num%></select>
                        <%}%>

    You seem to have some confusion between java and javascript, and when they run.
    Java code runs only on the server, and produces an HTML page.
    Javascript code runs on the client.
    The two can not communicate. Specific to your example you seem to think that the java code will be executed by your onChange event.
    This is not the case.
    In order to run java code again you have make a request by submitting the form, or clicking on a link.
    Cheers,
    evnafets

  • Slideshow crop photos problem when i close the thumbnail botton

    In the slideshow i use thumbnail photo "turned on" to change the pictures (is it the only way to do it?)  and manage them with crop function but when i later close thumbnail (i don't want visible) photos resize. Any suggestion ?

    I have not a link yet, i'm preparing the graphic layout at the time. I bypassed the problem importing in muse the right photos size without use crop. Maybe i should see better edit photo functions tutorials. I'm new with Muse.
    Il giorno 09/ago/2013, alle ore 01.37, Brad Lawryk ha scritto:
    Re: slideshow crop photos problem when i close the thumbnail botton
    created by Brad Lawryk in Help with using Adobe Muse CC - View the full discussion
    Can you provide a link or screenshots so we can see what you are doing and what you are trying to achieve?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5579245#5579245
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5579245#5579245
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5579245#5579245. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Nexus 1000V. problem when working with the console VMWare

    I have a problem when working with the console VMWare.
    Sometimes it is impossible to connect any of the hypervisor to the guest OS managed by them.
    I get the message: "Unable connect to the MKS: Host address lookup for server <name of the hypervisor> failed: No such host is known."
    This message always appears in conjunction with the reconfiguration of virtual switch: "Reconfigure vNetwork Distributed Switch .... Initiated by Cisco_Nexus_1000V_ ....."
    Upon completion of the reconfiguration, Communication console, with guest OS is restored, or on its own or after a reboot srv-vc.
    In this time, I do not see any message in Nexus 1000v log.
    What is this?
    Thanks in advance.

    Smells of a DNS issue.  Are you sure your ESX hosts are reachable from your client via DNS hostname?  Try pinging them from a command prompt/terminal.  You may have DNS server issues.
    As a temp fix, edit your [windowspath]/system32/etc/drivers/hosts file and manually add the ESX host name and IP, then re-test.
    Regards,
    Robert

Maybe you are looking for

  • DigitalGraph Annotation at different axis-Y level although the value is same

    Hi, I have plot a graph with annotation and I found it labeling the axis-Y at the different level, with the same value. Please look at the screenshot I attached. I have attached the Vi too, simply run it will get the result as preview in screenshot. 

  • Error 6 in write to spreadshee​t file

    Hello.  My program reads a 1D array of 12 values, then increments each value as the controlled components activate.  The program then writes the new value back to the file, replacing the old value.  After running for a time, I get the following error

  • How do you make some pictures in your iphoto library, eyes only protected

    I want to make some of my pictures unviewable except by password or something so they are not accessible to the whole family, for example I bought my wife a present and took a picture of it to send to her dad and brother. She opened iphoto and you gu

  • Copying files into site

    How can I create an extension that when added automatically adds a required file/folder to the current dreamweaver website? I've seen other extensions add javascript and .gif files and folders but I cannot find any tutorials on how to do this. Exampl

  • Slow/Freezing Programs

    Hi, The applications, since I downloaded this, are functioning at a slow pace the majority of the time. More than twice, Photoshop has freezed up on me. Is there any way to solve this?