C6-00 email account problems, need help please..

Hi all. First of all, I don't experience any issues with the email accounts as referred to in other posts here. I do however have one problem and would appreciate if someone could explain a work-around for the issue. I'm desperately trying to set up a Gmail account using IMAP protocol but that allows me to access all advanced settings and not the ones pre-defined by the Nokia software. I'm basically wanting to have the same control I have over non pre-configured email provider accounts, download limits in KB, constantly connected when i have the mailbox open, choosing what folders to sync or not, etc.
I did manage to have a Gmail account configured this way by mistake. When i set up the account it gave an error informing me of that i could try to continue with "alternative settings without the Nokia personalization" sort of (don't remember really the message) and after accepting to continue the account was created with "standard IMAP" settings.
I'm however unable to re-create the event and simply cannot create a Gmail account with those settings. Even tried to set up another existing account and then edit definitions to Gmail but the personalized settings are always taking priority.
Any advises please? Thanks alot in advance and best regards!
Fredrik
P.s. Sorry for double post. Mozilla Firefox messed up my 1st post

Same problem here, but with error -2096. Can connect fine on same network with an iPod Touch and a Macbbook, but the Mac Mini that normally connects to iTunes just won't connect. Not using multiple accounts, uninstalled iTunes 8, reinstalled 7 - no joy. Uninstalled 7 reinstalled 8, no joy. Updated 8 to 8.01, no joy. Tried putting the Mini into a DMZ on the router, still no good. Sent an email to Apple support who will needless to say tell me to reinstall iTunes 8......
Not working for me as of 10/10/08.

Similar Messages

  • I want to decline my payment monthly and I don't want to be a member I want out can any one help me and I want my money back that being going out of my account I need help please

    I Need help I don't want to be a member I want out and I want my money back that being taking out of my account I need help please

    Hi Roger
    Thank you for your reply.
    My original feed is: http://casa-egypt.com/feed/
    However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
    Is there any way to change the feed in itunes? The only feed I have now is  http://feeds.feedburner.com/CasaEgyptStation
    I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
    I know that I missed things up but I still have hope in working things out.
    Thanks is advance.
    Dina
    Message was edited by: dinadik

  • TS4006 i lost my ipod and cant sign in on my account i need help please

    i need to acess my my i cloud account and cant i need help cause i lost my ipod

    How are you trying to access your account?

  • Accident email account delete- need help restore all contacts

    Help, this morning I accidentially deleted my email account in yahoo, and now ALL my contacts are gone....how do I restore the contacts. I don't have mobile me set up yet.

    Were you provided an option to transfer the backup from your Touch to your iPhone that you accepted?
    Which supported application on your computer are you syncing contact info with?
    With Vista, this can be with Outlook 2003 or 2007, or with the address book used by Windows Mail with Vista - which is the name change for Outlook Express with Vista. The address book is called Windows Contacts I believe and the sync option for contact info is selected under the Info tab for your iPhone sync preferences.

  • Can i use two iphone 4's on my mac usings itunes account but also get different contacts and email accounts...help please

    Hi i two iphones one mine one my wifes.
    We have one mac laptop and one itunes account. is it possible to sync the two iphones on itunes but have two different contacts and email address.
    But i would also like my apps to work on her mobile as i do not want to pay for them twice..

    Yes. There is no device limit for the number of iPods, iPads, and iPhones that can be synced with the same iTunes library and iTunes account on the same computer. Each device can have its own sync preferences with iTunes on the same computer.
    If both iPhones are synced with the same Address Book under the same computer login account, then the contacts on each iPhone will be the same. With the Address Book on a Mac, you can sync select Address Book Groups only with an iPhone instead of the entire Address Book and all groups. You and/or your wife can create an Address Book Group or multiple Groups to be synced with each other's iPhone only. You can transfer the settings for one email account to one iPhone and the settings for another email account to the other iPhone.

  • Serius project problems - Need help please

    Hi,
    I'm using adobe premiere and after effects to my last film (this is not the first time). I'm using DV 1280*720 default sound settings (as I did before in other movies). I have an Imac C2D and plenty of hard disk space.
    Yesterday when I import new takes and done some light fx's (blur 10% and tint) when I saved the premiere frozen for 30 minutes and then I had to force quit.
    When I've tried to open that project again, it just don't open. I've tried everything. See if there was any corrupted file, checked for Hard drive problem (it doesn't have any) and I delete the previous rendered files (as I saw on some tutorial).
    At least I could recover that project using autosaved and previous project backup (I take care always of saving backups).
    But when I saved again (the new recovered and rendered project) it freezes on quit and there comes again. (it seems that premiere it is getting something from the old(damaged) project and just stack there !!!!!!
    The project then it just don't open (I don't see any error message) I just see after 1 hour my premiere freezed and there is no way to see the timeline to fix anything.
    I assume that I have to recover again and to all work over and over. I saw some forums talking about adobe "broken links" something related to video files source and corrupted files, but I still don't get it (since premiere doesn't tells me what is going wrong!!!!!!). They talk about deleting MACC file on windows but I'm on a mac. I didn't saw any tutorial about recovering.
    whe this thing happens I see my timeline with video and audio. I can render but when I quit the program doesn't load the project again.
    Please any help...... I'm working since a month ago on this movie and I need to deleiver that asap.
    Is it better to export the video in parts and them join in a new project or there is any other thing that I can do without missing my month of work.
    ohhh man I just want to scream

    For any reason that I can't explain when I arrived home after day work, I've tried last time before looking my backups and Premiere loaded my project
    Before save and quit I've take a look in all file (check the link and where is the source) I found 2 still frames (photos) were lost ( i mean from my hard drive).
    My biggest clue now it is, when I deleted some video file before, when I enter the premiere project 1st thing that show it is a windows asking me to "point" where is that file.
    But when happens with a photo, premiere doesn't say that this files are lost. It just stucks your project. Any tip to prevent this again?
    Hardware Overview:
      Model Name:    iMac
      Model Identifier:    iMac7,1
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.4 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    4 MB
      Memory:    4 GB
      Bus Speed:    800 MHz
    Intel ICH8-M AHCI:
      Vendor:    Intel
      Product:    ICH8-M AHCI
      Speed:    3 Gigabit
      Description:    AHCI Version 1.10 Supported
    WDC WD3200AAJS-40VWA1:
      Capacity:    298.09 GB
      Model:    WDC WD3200AAJS-40VWA1
      Revision:    58.01D02
      Native Command Queuing:    Yes
      Queue Depth:    32
      Removable Media:    No
      Detachable Drive:    No
      BSD Name:    disk0
      Mac OS 9 Drivers:    No
      Partition Map Type:    GPT (GUID Partition Table)
      S.M.A.R.T. status:    Verified
      Volumes:
    iMac:
      Capacity:    297.77 GB
      Available:    158.68 GB
      Writable:    Yes
      File System:    Journaled HFS+
      BSD Name:    disk0s2
      Mount Point:    /
    ps: about your question "Next, please verify your Project/Sequence Presets. Do they match your footage 100%?" I've changed 2 video files, they were pretty bigger than the part I was taking for this project, so I edit and save just the part that I am using.
    Btw I've heard that Journaled HFS+ it is not good on Imac to use premiere render option. Is that right?
    Many thanks in advance.

  • Account problems (need help ASAP)

    I was able to download apps yesterday 10-8-08, but today, for some reason, nothing is working. It started when I noticed I had 2 updates for my apps. I did the usual, download both free updates, I gave my password, but then, after a minute, it said that my Apple ID could not be found or my password was incorrect. I tried again, got same message. I tried to download the updates through my iPod Touch, got same problem. Went back to laptop & tried to access my account on iTunes, no luck. Went to support & changed my password. Tried again, no luck. Tried again & this time got a new message, "We could not complete your iTunes Store request. An unknown error occurred (-4). There was an error in the iTunes store. Please try again later." Tried to download the top free app & got the message about my ID being wrong or password incorrect. Nothing is working. Is this an all around problem everyone is having as a result of iTunes going under maintenance or is something fishy going on with my account? Please let me know what else I can. Thank you.

    Same problem here, but with error -2096. Can connect fine on same network with an iPod Touch and a Macbbook, but the Mac Mini that normally connects to iTunes just won't connect. Not using multiple accounts, uninstalled iTunes 8, reinstalled 7 - no joy. Uninstalled 7 reinstalled 8, no joy. Updated 8 to 8.01, no joy. Tried putting the Mini into a DMZ on the router, still no good. Sent an email to Apple support who will needless to say tell me to reinstall iTunes 8......
    Not working for me as of 10/10/08.

  • Setup Problem - Need Help Please!!

    My problem is a low hum eminating from my speakers every time I connect my MPC2000 sampler to my audio interface.
    My setup consists of the MPC2000, a Dj Mixer, and my laptop which has an M-Audio interface which I use to connect the mixer & MPC. Basically, as soon as I remove the cables that connect my MPC or my mixer to my interface, the hum stops. I've tried different cables, new cables, a ground adapter for the MPC to change it to 2 prong, and nothing helps. The only thing that DOESN'T cause this hum when plugged into my interface, is my keyboard, so i'm quite sure the interface itself isn't the problem.
    Does anyone know what might be causing this interference that's resulting in a hum? I have exhausted all my own theories and am desperate for some sort of help! Many thanks in advance!!!

    Hi beirut,
    Try the following:
    1.Put the mpc2000,the dj mixer and your computer all in the same power outlet from the wall.
    2.Go to home despot and buy a few gray-colored ground lift plugs (they must be gray)
    3.With these gray ground lift plugs,lift the MPC2000.test the system.No hum=solved problem.hum still there or different,list the DJ mixer.
    4.Is your DJ mixer hooked up to turntables? If so,you need to ground the turntables to a proper ground.Good turntables have a little wire coming out of them,just for that purpose.
    5.Try turning off any TVs,refridgerators,fluorescent lighting(the ones that look like office lights),and other things around your place,and see if the hum goes away.
    6.Try using a DI box for your DJ mixer,to plug it in to the DI,and then out to the audio interface.
    7.And Most Importantly... RUN AND BUY A DIFFERENT BRAND OF AUDIO INTERFACE!!!!!!!!!! M-Audio...yucky yucky yucky!!!
    Cheers

  • Print to screen OR file problem, need help please.

    Hiyo!, im doing a certain program the way to Uni wants me to do it so im using a textFile jar file for all the reading writing etc, i know its not standard java but thats not what im having trouble with.
    Im trying to make a prog that will print its results to screen if the only augument on the command line is the file to read from eg.( java ProgramThree input.txt ).
    but if two arguments are written on the command line eg.( java ProgramThree input.txt output.txt ) then it
    will print the results to the file (output.txt) and not display to screen.
    I know that its just that ive messed up a couple of the "args.length" statments in main() , but my brain gets confused easy :[
    Any help would be sweet. Thanks.
    class ProgramThree
            public static String calc(String line)
                String type[] = {"Valid Isosceles","Valid Equilateral","Valid Scalene","Invalid"};
                String result = null;
              int s1 = 0;
              int s2 = 0;
              int s3 = 0;
              try
                   StringTokenizer st = new StringTokenizer(line);
                   s1 = Integer.parseInt(st.nextToken());
                   s2 = Integer.parseInt(st.nextToken());
                   s3 = Integer.parseInt(st.nextToken());
              catch (Exception e) {e.printStackTrace();}
              if ((s1+s2>s3)&&(s1+s3>s2)&&(s2+s3>s1))
                   if((s1==s2)||(s1==s3)||(s2==s3))
                        if((s1==s2)&&(s1==s3))
                             result = type[1];
                        else
                             result = type[0];
                   else
                        result = type[2];
              else
                   result = type[3];
              return result;
            public static void printScreen(String result)
              System.out.println("\nTriangle is: " +result+ "\n");
            public static void main(String args[])
              String line = null;
              String result = null;
                    if(args.length > 2)
                      System.out.println("Too many Filenames Given!");
                      System.exit(1);
                    textFile inFile = new textFile(args[0], 'r');
                    textFile outFile = new textFile(args[1], 'a');
              while(!inFile.EOF())
                   line = inFile.readLine();
                   if(line == null)
                        break;
                   result = calc(line);
                   if(args.length == 0)
                        printScreen(result);
                   else
                                 outFile.writeLine(result);
                        System.out.println("\nResults written to file.");
              inFile.closeFile();
              outFile.closeFile();
              return;
    }

    Thanks for your reply neil!
    But im not to sure how I would impliment your code into my program :0
    The code that I posted before is throwing an arrayOutOfBounds exception at the line
    inFile = new textFile(args[0], 'r');
    outFile = new textFile(args[1], 'a'); <-----------Here
    This happens if I enter none or one auguments on the command line :/
    But if I enter two auguments it works fine and writes to file..
    I know its because when there is one augument on the command line (or none at all) it opens to outFile for nothing, because its printing to screen?
    The thing is i dont know how to fix this :[
    -thanks

  • Email $header problem - need help

    I have designed a mail processing script to send POST data
    captured by a form to an email address specified by $to. It has a
    subject line ($subject). Now I want to add a ‘from’
    line which is to contain the email address submitted as one of the
    POST form fields (volunteerEmailaddress). This is all done in PHP.
    I took a crack at it (see below). The $to line and the
    $subject lines work just fine. The $header displays fine in the
    email but only the first piece (From: Volunteer Applicant), not the
    second piece (volunteerEmailaddress).
    Can anyone see what I have coded incorrectly and suggest the
    correct code to do this?
    Thanks!
    Carver
    //mail processing script
    $to = '[email protected]';// use your own email address
    $subject = 'Volunteer Application';
    // create additional headers
    $headers = 'From: Volunteer Applicant';
    if (!empty($email)) {
    $headers .= '\r\nReply-To: $volunteerEmailaddress';

    CarverW wrote:
    > Regarding email header injection attacks -- I have
    followed the tutorials in
    > your book and have in the include file what you have in
    your book in the file
    > process_mail.inc.php
    That should be fine. A lot of people just pick up scripts
    from outdated
    books or websites. So I wanted to make sure you were aware of
    the
    potential danger. You obviously are. ;-)
    > Your book has been excellent for my "learing curve" The
    'agony' of Chapter 10
    > was well worth it. I DO have a basic understanding,
    pretty much of each code
    > line but do get caught up in the syntax when I
    customize!
    Thanks for the feedback. I promise, the agony does eventually
    turn into
    pleasure - at least it does for most people.
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • EMU 0404 Problems -- need help please

    Any help to my current issue would be greatly appreciated.
    I recently bought the EMU PCI card on its own.
    Im runnin a brand new top of the range pc on windows XP (im new to XP, windows 2000 and a mac user originally - so i may have just missed something)
    But on my old windows 2000 machine with the standard on board soundcard, when i went to my sound settings (speaker in the corner) then, Properties > Recording....... i got a list of several options, such as - Line in, Stereo mix, wave out, etc...
    In the past i used the stereo mix setting to stream music to potential customers via msn messenger, obviously streaming what my soundcard played.
    After installing this soundcard, i now have no stereo mix or anything previous, only WAVE which i cant select or control the volume for, maybe because its on xp?? is there a way to record and stream (via msn) what your soundcard plays using the EMU 0404? i also used this setting to record sounds of the internet etc... Surely im being stupid? with an expensive upgrade to this soundcard from crappy on board? surely?
    If so any help would be massivly appreciated...
    Thanks in advance

    Thank you for you speedy reply mate.
    Ive read the link you provided aswell as several other sites and the manual.
    For some reason having the emu selected and enabled in the hardware settings instead of the on board soundcard it takes away all the recording settings in windows as i mentioned before.
    Simply i can record with this soundcard, i just want to stream what my soundcard plays through msn, also wherever i look the only option for playback and recording i have is E-DSP Wave [Df00]....... ive gone throughout the patchmix, tried near every setting to stream what my soundcard plays.. im lost
    cheers

  • Nokia n96 video problems.Need help please

    how do i go about putting videos on through pc suite but everytime i try, it starts converting and stops quatre way there.
    i tryed using another media converter all together now don't know what format or resolution the videos have to be converted to in order to work on my phone. the videos i have been trying to convert are .avi format.
    does anyone have any advice that can help me?

    PC suite is the wrong tool for this job as it's not very good at handling large files.
    A great source of information on how to make videos compatible with the N96 is available on this blog:
    http://portablevideo.blogspot.com/
    Look through the archives on there and you will find a very good guide on what programs to use and the required settings.
    If your avi files are divx or xvid you may want to install the programs below to see if you can play them without conversion. The program on the first link is free, the second is not but a demo may be available.
    http://labs.divx.com/system/files/private/DivXPlayer_S60_3rd_0.sisx
    www.lonelycatgames.com/?app=smartmovie
    Message Edited by psychomania on 20-Jan-2009 09:02 AM

  • My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,

    My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,

    Last login: Sun Apr 22 19:11:11 on ttys000
    Marlons-MacBook-Pro:~ ryanmnhs$ ls -la ~/Library/LaunchAgents
    total 40
    drwx------   7 ryanmnhs  staff   238  5 Nov 23:09 .
    drwx------@ 48 ryanmnhs  staff  1632 13 Jan 09:53 ..
    -rw-r--r--   1 ryanmnhs  staff   574 24 Oct 22:29 com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
    -rw-r--r--   1 ryanmnhs  staff   618 22 Oct  2011 com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.BAF380D0-E780-4E82-86BF-77 2440AB4936.plist
    -rw-r--r--   1 ryanmnhs  staff   895  4 Sep  2011 [email protected].plist
    -rw-r--r--   1 ryanmnhs  staff   802 21 Mar 12:56 com.facebook.videochat.ryanmnhs.plist
    -rw-r--r--@  1 ryanmnhs  staff   805  6 Sep  2011 com.google.keystone.agent.plist
    Marlons-MacBook-Pro:~ ryanmnhs$ 
    ,,,,,,,,THIS IS THE RESULT,, WHAT DOES THIS MEAN? HOW CAN I FIX MY PROBLEM? UP TO THIS DATE MY WORD, EXCEL AND POWERPOINT STILL DONT WORK!!!!PLEASE HELP ME, ANYONE? THANK YOU...

  • How can we open a new folder in the email account (ex: need to save certain emails into a new fodder called "work". can anyone help

    How can we open a new folder in the email account (ex: need to save certain emails into a new fodder called "work".
    Anyone can help?

    Right click on any folder in mail and select Create new mailbox.

  • After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

    After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

    Izit software or hardware? Confuse:(
    Only can use wifi now.
    Any way thanks guys for ur suggestion:) amishcake and simes

Maybe you are looking for