C6-00 How can I disable sliding lock switch?

Hello...
Explanation:
I realized that even when I block the keys and touch screen (end/Power key + block keys on menu) the sliding right side lock switch does not get blocked, so any accidental slide of it (e.g when putting it in my pocket) will turn on my phone.
Does anybody know if it is possible to disable the sliding right side lock switch when general key blocking?
THNX
Solved!
Go to Solution.

I went to a NCC desk last week. They confirmed to me that it is not possible to disable the sliding "unlock" switch.
Personally, I think that it would be very useful to have at leasrt a "2 sequences" unlocking procedure with the sliding "unlock" switch - as with the front white which (push+sliding on screen) - so accidental tuning on could be avoided.
Thnx.

Similar Messages

  • HT5934 How can I disable the lock screen option. I do not want to punch in a multi-digit security code every time I need to use the phone

    How can I disable the lock screen option? I do not want to punch in a multi-digit security code every time I need to use the phone.

    System Preferences - Security & Privacy - unselect the box called Disable automatic login

  • How can I disable screen lock without entering a passcode?

    How can I disable screen lock without entering a passcode? I accidentally clicked on screen lock and I can't get out of it, and I didn't know I had a passcode, I even reset the ipod and it's still there. Any help??

    I'd try restoring through iTunes.

  • How can I disable the lock code on my N8

    Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
    Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
    Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
    Would like to hope there is some way to have control over this. Can someone help?

    singmk wrote:
    Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
    Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
    Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
    Would like to hope there is some way to have control over this. Can someone help?
    Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
    My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
    You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
    Hope this can help you.
    If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

  • How can i disable passcode lock

    I recently gave my old IPhone 4S to my daughter. She keeps putting a passcode lock on the phone and doesn't remember the code. Is there any way that I can turn the passcode lock off so she doesn't have access to it, or that I can lock that feature where she needs my passcode to be able to access it?

    LOST PASSCODE
    You may be able to reset the passcode by restoring the device.
    Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
    Right-click the device in the left column and select Back up.
    When the backup is complete, select Restore.
    When finished, restore from your most recent backup.
    Otherwise read this
    If that doesn’t work  you will need to perform a factory restore to remove it. Or read:
    Enter Wrong passcode
    http://support.apple.com/kb/ht1212

  • Re: Satellite L40-17U: How can I disable WLan switcher?

    Hi, there!
    How can I disable wi-fi switcher, which on the front of the laptop under the power, battery and hdd leds?
    If it possible :)
    Thanks.

    Sorry buddy but I do not understand why you want to do this. I believe you are the first one who ask something like this. Can you please tell me why you want to do this?
    If you do not want to use WLAN switch it OFF and be happy?

  • My macbook keeps locking all of my folders and files, even when I try unlocking them myself in Get Info and disabling autolocking in Time Machine, how can I stop the locking as well as unlock my files?

    My macbook keeps locking all of my folders and files, even when I try unlocking them myself in Get Info and disabling autolocking in Time Machine, how can I stop the locking as well as unlock my files?

    Managed to solve this myself. Just went to properties > hidden.

  • Openning a disk file places a lock on it. How can I disable this?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/867611]]</blockquote>
    Opening a local, disk resident HTML file in Firefox places a lock on it. When I try to delete it before closing it in Firefox, I get an "Access denied..." message.
    How can I disable such a lock placement?

    A couple of other possibilities:
    The CD is dirty / damaged / suffering from "CD Rot" - sometimes CDs may seem to play fine on a CD player (or using the CD-player function of a PC) but will not transfer correctly to a computer - this is the result of the way that CD players auto-correct the datastream from the CD where PCs, when reading the audio CD as data, do not.
    Enabling the error correction function in iTunes import may alleviate if not fully resolve this
    Use an alternate tool to extract the audio from the CD - Exact Audio Copy is probably the best out there, as it can be configured to attempt multiple reads of every audio sample on a CD to get a consistent result.  Then import the resulting files into iTunes.
    You don't say whether this is specific to one CD as in the original poster's case, but the "crackling" symptom has affected a significant number of users of the 64-bit version of iTunes 12.1.0.71 - these are mostly addressed in the most recent update (12.1.1.4), but if nothing else works it may be worth trying this alternative installer: iTunes 12.1.1 for Windows (64-bit — for older video cards)

  • HT201317 How can I disable picture frame when in locked position?

    How can I disable picture frame when in locked position?

    Go to Settings>General>Passcode Lock, enter your passcode, then turn Picture Frame to Off.

  • How can i disable running status of recording from lock screen of iphone 5?

    How can i disable running status of recording from lock screen of iphone 5?

    You need to stop the recording. Is it reading Recording Paused? If so, instead of tapping the red button to stop it, tap the word DONE. That is what actually stops the recording. Tapping the red button just pauses it.

  • How can I reset my lock passcode without plugging it into the computer or restoring it or resetting any data?

    I went I to my phone and I tried to unlock my passcode but it did not let me in, how can I reset my lock passcode without plugging it onto the computer on iTunes, or restoring it or deleting any data ?

    You don't. The only way to remove the passcode if forgotten is to restore the device. If you have a backup, you can restore to that last backup, but anything done since that last backup would be lost.Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

    How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
    I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
    I sure would like to decide about that myself.
    Thanks in advance if this will be changed.

    singmk wrote:
    Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
    Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
    Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
    Would like to hope there is some way to have control over this. Can someone help?
    Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
    My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
    You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
    Hope this can help you.
    If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

  • How can I disable my iphone with a computer using itunes?

    How can I disable my iphonewith a computer using itunes?

    Welcome to the Apple Community.
    You cannot disable your phone using iTunes.
    You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • How can i hide or lock the apps on ipad

    How can i hide or lock the apps on ipad, i don't want anyone to see some apps when my ipad was used. Without Jailbreak.

    It depends what you mean by 'lock' if you mean keep the iPad on a specific app that's easy to do as long as you are updated to iOS 6 which from your device information I can see your iPad is updated to iOS 6.0.2. All's you have to do is go to Settings > General > Accessability > Guided Access > ON > Set Passcode (Set a passcode to lock an app onto the screen). Go back to the home screen and click the app you would like to lock onto. Press the home button three times quickly. You can then highlight certain parts of the app you would not like them to be able to press, disable touching or motion if thats what you need. Press start. To exit the locked app triple press the home button again and type in the passcode you set earlier. Press end in the top left corner. I hope this helped you but if by 'lock' you meant don't allow on the app this is not possible as of yet with the iOS software although some apps do allow you to lock them with a passcode or you could try restrictions in the settings menu but this only works with built in apps such as; camera, facetime, safari, downloading apps, siri etc.

  • How can i disable my ipod touch

    how can i disable my ipod touch 4th generation

    You disable an iPod by enter ing the incorrect sceren-lock passcode toomany times. I do not know whay you would want to to that.
    If you want to recover from a disabled iPod
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Maybe you are looking for

  • Grouppix in other languages

    While GroupPix is a brilliant idea it's a pity it's only in English. To be useful for all age groups in Denmark for example it would need to be available in Danish. Would be nice with a translation module or the like.

  • My InDesign will auto quit when export PDF

    Process:         Adobe InDesign CS5.5 [707] Path:            /Applications/Adobe InDesign CS5.5/Adobe InDesign CS5.5.app/Contents/MacOS/Adobe InDesign CS5.5 Identifier:      com.adobe.InDesign Version:         7.5.3.333 (7530) Code Type:       X86 (N

  • Best practices for loading apo planning book data to cube for reporting

    Hi, I would like to know whether there are any Best practices for loading apo planning book data to cube for reporting. I have seen 2 types of Design: 1) The Planning Book Extractor data is Loaded first to the APO BW system within a Cube, and then ge

  • How to Trigger CAF web services from java Job schedulers?

    Hi Experts, I am in need of calling CAF based web services from custom Job scheduler. Could you please provide your idea and input if anyway we can call such web service by java api in custom jobs development? Thing is that we have CAF BO which hold

  • Banding

    G5 Dual Core Mac 2Ghz 2 GB SDram A few weeks ago my monitor went funny and there was lots of banding instead of smooth tone in photographs etc. I have brought a new monitor and I felt that why the banding were there. However I am now thinking it is a