C6-00 keyboard light not working....

Recently when i sms using keyboard on phone suddenly the light on keyboard turn off and i still typing a work...Any solution for this...Plus when my keyboard turn off my LCD light still on....Also did we nid to bring our phone to nokia center to service?When?FOC?

Hi,
There are light sensors in the C6-00, the keyboard light will switch on only when the sensors sense that the phone/ keyboard is in dark place.. if there is sufficient light (or light falling on the sensors) then the keyboard light doesnt glow.
Hope this helps!

Similar Messages

Webcam and keyboard light not working on my macbook pro

I just reinstalled snow leopard on my macbook pro and I can seem to get my webcam to work, the light on the keyboards are not coming on either, has anyone encountered something like this before

Don't know about the webcam, but a SMC reset may help the keyboard backlight:
http://support.apple.com/kb/HT1411?viewlocale=en_US
If you installed Snow Leopard and then updated it, then it might not hurt to open Disk Utility and repair permissions if you haven't already done so. Be sure all your software is up to date.
Good luck!

Keyboard light not working under Windows 7 - X200

Has anyone had success getting this working? Thanks.

Pushing these buttons does produce the light graphic on the screen showing that the software has received the command. However the keyboard light does not come on. I don't believe that this is a problem with the light itself for two reasons - one, it started happening exactly when I installed Windows 7 and two, because other people have had exactly the same problem when using Windows 7. Somehow Windows 7 is interfering with this particular command. I was hoping that someone might have figured it out.

N900 Physical keyboard lights not working

Hi,
Physical keyboard lights are not working when display is fully up. Keyboard lights work only when display is halfway up. Lights go off just a millimeter before when display reach it top position.
Can anyone suggest is this a software issue or there is something physically wrong with phone (slider-switch is slightly misplaced or broken)?
Thanks.
Solved!
Go to Solution.

Thanks to all for content-rich reply..
-> to cpitchford: I downloaded package and entered the commands you suggested. X terminal reply after "sudo gainroot" was "Enable RD mode if you want to break your phone". I'm not at home with RD mode, so I rather don't mess with it.. After all it was mentioned to just monitor when the switch is on/off? Keyboard light comes ON when display bottom edge reaches middle of Q-letter (on keyboard) and go OFF after the "clunk". Then, if I slightly press down the display (1mm) the keyboard lights come ON again.
_> to DrEJV :I think the background light sensor is working OK - when I cover the light sensor with finger ,display dimes slightly. Problem is that keyboard light don't work at all when display is fully open, not even in total backround blackout.
Think that there might be wrong something with physical switch, as jlpils suggested, because now I know that they SHOULD be lighted
thanks again

MBP 2010 had Mobo replaced - Now keyboard lights not working?!?!

Hi,
I have just picked my MBP 2010 back up from the apple store, after it having its main logic board replaced. After having it back home for a few hours, I have only just noticed that the keyboard back lights are no longer functioning. By turning the brightness up with the f6 key, it brings up the HUD which shows the brightness bar going up, but the lights are still off.
I have tried to go into the settings and turn off the option that says automatically illuminate keyboard in low light to see if that fixed the issue, but no success. I have also installed lab tick, but this still did not get the backlight functioning.
The last thing I tried was a SMC reset. I performed this twice but to no avail.
I have tried to search the forums for alternative reasons as to why they would not be working, but cant find anything.
Can anyone advise me as to what my next step should be? I would like to try to fix this myself rather than take it back to the apple store, as it is about an hours drive away (last resort). I have read that there is a cable that connects the keyboard backlight, and this could become loose during maintenance. Is this easy to find / check ?
Thanks

Just incase people have the same issue down the line, I managed to fix this problem myself within 5 minutes.
I found a guide on ifixit.com for my model of macbook and then looked at the logic board replacement section (as this is what repair it had been to apple for).
I found the section regarding the power ribbon for the keyboard lights, and after taking my mac apart, I realised that they had not connected the ribbon, and it was still left unattached under one of the fans.
Carefully connecting this back and then putting the fan back solved the problem. So a simple 5 minute job has saved me a long trip back to see apple.
Thanks for your help anyway guys!

Keyboard light not working on boot camp!

Hi
I received some updates for the Boot camp just recently, and since then the keyboard light doesn't turn on anymore when it gets dark! I'm working on the windows XP...
I feel i made a huge mistake accepting the update!!!!
has anyone encountered such problem?
Thanks

Have you tried manually turning it on?
Press the F8 button I believe to toggle the backlight
You may have accidentally switched it off or something
If that doesn't work, try F10 to brighten it just to see if it's working

Keyboard light not working on Late 2006 Macbook model with OS X Lion 10.7.5 ..

Can someone please advise... not sure if the light just died or whether its a tab/function that is turned off. how do I get the backlight to work again ?
Thanks!

Resetting SMC could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Keyboard light not working properly

so i noticed yesterday when i put on my wifi from the key board the mute light came on even though the computer was not muted .now this morning all light are on including the caps lock light and they are no turning off it it anoying because you cannt tell if you caps lock or volume is realt on or not please helo

Hello , Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community! I came across your post about the indicator lights staying on, and wanted to assist you! First, you can try testing and calibrating the battery. You may also want to consider performing a Hard Reset. However, keep in mind that this will remove your personal files and settings. So if you try this option, I recommend backing up your files first. You can review the following documents to help you with this, if needed:HP PCs - Backing Up Your Files (Windows 8)HP PCs - Resetting Your PC to Resolve Problems (Windows 8) Please let me know if this information was helpful by clicking the "thumbs up" below.
Have a great day!

My mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.

My screen is black and keyboard is not working. USB is good. Caps lock light will not turn green like I have no power. Any suggestions

My screen is black and keyboard is not working. USB is good. Caps lock light will not turn green like I have no power. Any suggestions

Ouch, doesn't sound good, but...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

After Recovery with CD Satellite C660-1FE keyboard does NOT work

Hello,
A month ago I purchased a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and replaced the broken HD. As I did not make an recovery image of my HD, I had to order the Product recovery discs off the Toshiba website (3 discs, of which disc 1 and 3 were the only one's required for installation).
Now, I have the problem that my laptop keyboard does not work. I am currently using a USB keyboard and mouse to replace my keyboard and touchpad of the laptop.
The laptop keyboard works fine in BIOS. Therefore, I hope it's just a driver problem.
I have:
tried finding and installing lots of drivers on from the toshiba website, no result.
tried changing settings in the bios (usb enable/disable).
tried to fix the problem by re-installing the entire computer again several times.
The keyboard seems to work until windows loads. When the system is starting up I can press caps lock and num lock and the green lights come on. This all stops working once the windows startup symbol appears.
Perhaps a second problem in the device manager: under the display-adapter, 2 subcategories have exclamation marks: it says Mobile Intel(R) 4 series express chipset family twice! I can't seems to fix these with any drivers I can find either. When I check the settings I have this message (google translate since it was in dutch):
+The digital signature for the drivers for this device is required, can not be verified. Possible after a recent hardware or software change a file that is installed incorrectly signed or damaged, or is malicious software installed from an unknown source. (Code 52)+
+You need to restart the computer to this device changes to take effect.+ (obviously I tried that too)
Can someone please give me some help? I am at the end of my wits.
Sincerely,
Daniel

Hi MisterX,
thank you for your response. I have tried these things and there is no such thing as PS2/keyboard in device manager. It's as if the Hardware is not even recognizable in windows. I am starting to doubt whether I got the right Backup CD.
I wrote the following e-mail to [email protected]:
+Dear Toshiba,+
+after receiving the recovery CD's for my toshiba c660-1FE, it turns out that the drivers for the keyboard and touchpad are not installed. I have tried many things to get around this but it seems to me that I have received the wrong product recovery CD's. The chipset drivers are not the right ones, the overall layout of this version of windows 7 is different from before and when looking for answers in the toshiba forum I have concluded that the recovery CD's could be the wrong ones.+
+My laptop: Satellite C660-1FE+
+serial: 5B378048K+
+Part-nr: PSC0LE 02M0TU26DU+
+Recovery CD's I received are CD's 1-3 with serial R14254DU+
+Would you be so kind to check whether these CD's should be 100% compatible with my laptop?+
+This would be greatly appreciated,+
+Daniel+
MisterX, do you know any other emails I can forward this too? Or anyone who could perhaps tell me if I got the right CD's? They are taking their time to respong to this...
Kind regards,
Daniel

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

The wireless keyboard is not working with my iPad2. I turned on Bluetooth and paired it. What else is there to do?

The wireless keyboard is not working with my iPad2. I turned on bluetooth and paired the device. What other hidden step is there to do?

Well, the tiny green light comes on and blinks. . . After a frustrating time, I turned everything off. Later, when I tried the keyboard again, it worked. I guess the bluetooth process takes longer than expected. So thank you for taking the time to help a technically impaired person!!

My backlit keyboard keys not working?

How come my backlit keyboard keys not working? When I try to use them I get a circle with a line running through it?

cpickrell wrote:
Jax, the backlight is currently usinig a sensor to turn the light on and off for you. This uses the least amount of battery. If you want to test or control the lighting yourself, go to the Apple Menu, select System Preferences, click on the Keyboard icon. Here you can turn the automatic setting on and off. If it is off, you can use they keyboard keys to turn the keyboard lighting on and off.
Exactly!

MacBook Pro Backlit Keyboard does not work

Hello all!
I recently bought a used MacBook Pro (late 2008, 2.4 GHz Core2Duo) and the backlight on the keyboard does not work. I have reset the SMC and the PRAM, I have the latest firmware (EMI and SMC) and still no luck. I am hoping this isn't a hardware issue, but what can I do to fix this?

I think there is a sensor on the top left. It looks like a little speaker thing. If you swipe your finger over it, it activates/deactivates it. I read this somewhere online. Works for me most of the time if it's not lighting up and showing the 'no/stop' symbol.

C6-00 keyboard light not working....

Similar Messages

Maybe you are looking for