C6 and CC Conflict with deployment

Hi guys,
I currently have multiple users that have CS6 Installed on their macs.  When I try to install CC on the computers, it fails. If the computer does not have CS6 already installed, CC installs with no issue.  The reverse is the same, if a computer already has CC installed, CS6 installation fails. 
CS6 and CC  use two separate adobe ID's.  Could this be causing the issue?  Does anyone know the quickest way to consolidate two accounts?
Any help would be so wonderful.
Thank you

Obiwantrenobi I would recommend reviewing your installation logs to determine the cause of the installation failure.  Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.  You are welcome to post any specific errors you discover to this discussion.
It is likely you will discover a file permission error within your log files which is preventing a file or folder/directory from being updated after a previous Adobe installation has been made.

Similar Messages

  • TS3366 iOS 7: Back and Forward Gesture in Safari and Mail conflicts with Panning Gesture

    Back and Forward Gesture in Safari and Mail is different than the back and forward gesture used to swipe between Home screens.  The simple swipe with the thumb straight does not work in Safari and Mail, it conflicts with the Panning gesture.  It should be relatively easy to improve the algorithm to allow for that gesture to work.

    Indeed, swiping back from pdf pages sometimes works, but most often does not.
    It seems that the swiping gesture has in all cases changed slightly. It is now necessary to swipe a little until a portion of the previous page is uncovered, and only then can one swipe back.
    The fact that there is a specific way to swipe back from html pages suggests that there might be an equally specific way to swipe back from pdf pages. I am still experimenting. Meanwhile make sure no one is sitting to your right in case your trackpad flies off during a gesture trial.

  • JCAP512 and JCAP6 conflict with concurrent database connectivity

    So here is the situation:
    Environment:
    - We have a production JCAP6 appserver (AIX server 1) running a project pulling data from database A
    - We have 4 JCAP512 domains on AIX Servers 2,3,4 running 4 distinct projects pulling data from server A
    - All project run on a schedule of 5 minutes and login to the server with the same login
    - Database A is SQL Server
    - repository based code
    Scenario:
    - All 5 above processes run concurrently in the greater JCAPS environment.
    - When all 5 processes are running, the JCAP6 process runs fine with no issue but at the same time the 4 JCAP512 processes hang on the database side waiting for a resultset with a wait status of ASYNC_NETWORK_IO
    - As soon as the JCAP6 process completes, all 4 JCAP512 processes start running with no errors. Once the JCAP6 process starts again, same result.
    - We shut off the JCAP6 process and all 4 JCAP512 processes run with no issue
    So after my high-school proof setup above my question comes to what is going on??? All of these processes run on their own isolated physical and application servers. Their only commonaliy is the login to the database. Are there any known database connectivity settings that would limit user transactions if another (same) user connection currently exists?
    Has anybody seen anything like this? Ay assistance would be greatly appreciated.
    Bryan
    Edited by: bgrant88 on Jan 29, 2010 2:15 PM

    I've never worked with the old version of the toolkit, so I don't know how it did things, but looking inside the SQL prep VI, it only generates a command, and the the column name VI wants a recordset. I'm not super familiar with all the internals of ADO, but my understanding is that is standard - you only have the columns after you execute the command and get the recordset back. What you can apparently do here is insert the Execute Prepared SQL VI in the middle and that will return what you need.
    I'm not sure why it worked before. Maybe the execute was hidden inside the prep VI or maybe you can get the column names out of the command object before execution. In general, I would recommend considering switching to the newer VIs.
    Try to take over the world!

  • Play.this(); and compositionReady conflict with Edge Animate CC

    I am designing a website and I have created animation with three images.
    At the end of the last image, I am using the play.this()[; symbol to repeat the images that are being played.
    When I go to create a composition ready function on the Stage, all triggers on the Timeline start working.
    Is there a fix for this or am I doing something wrong?

    You must have a code error. When there is an error the whole timeline plays to the end.

  • CSS backgroundImage and borderSkin conflict with ClassReference

    I've spent several hours trying to figure this out.  I have a programmatic skin that paints a gradient and sets it as a backgroundImage ClassReference in css.  In that same stylesheet declaration I set the borderSkin to a ClassReference of a class that extends border and draws a line.  A canvas is referencing the declaration.  I'm confused because if I only use the background image style it draws the gradient.  If I add the border skin style, it won't draw the gradient but draws the lines in the border skin.  The interesting part is if I set breakpoints, I never even hit the breakpoint in the updateDisplayList method for my background image class, only the border class, so all I ever get is a line.  Does the borderskin in css override other skins like backgroundImage?  Are there documents that explain this somewhere on adobe's site? 

    I don't think any of those items would affect the behavior of that tabbed region.  They are all pointing at some unprotected javascript on the page - ordinarily placing those bits of embedded script between CDATA  lines will eliminate these validator complaints.  If that were done, this page would probably validate.
    As for the original question, I am not sure why the symptoms reported are occurring in IE.  Perhaps someone else will spot the reason....

  • MOVED: Got NX8400GS TD-256E video card and it conflicts with onboard video

    This topic has been moved to VGA products.
    https://forum-en.msi.com/index.php?topic=141769.0

    This topic has been moved to VGA products.
    https://forum-en.msi.com/index.php?topic=141769.0

  • The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

    I have a user on an iMac 10.6 connected to our domain.  She uses Outlook web access for email on our exchange server.  Last week she received the following message which is randomly preventing her from sending emails.  She claims no attachment was involved in the original email when this all started.  I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue.  I realize this may not be Mac related but thought I'd give it a try.  She did say it occurred once over two days while working on a PC but it continued over the past weekend.
    If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
    This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • Is anyone else having conflict with 10.8.2 update and audio files?

    I recently updated from 10.8.1 to 10.8.2 (big mistake).  Now my digital interface has all of these random clicks and pops.  Worse yet, when I try and play my audio files (Digital Performer) or ITUNES that music stops, starts, stutters and is basically unlistenable.  Before the update everything ran smoothly.  I talked with the tech support for my digital music application (Digital Performer) and he thinks there is a conflict with the latest Apple update too.  Is anyone else having these problems?
    To get back to 10.8.1 do I have to wipe the hard drive and re-install everything?  I use my Mac for music production so this is killing me.  Any ideas?

    I once again reloaded 10.8.2, all of the current firewire, USB, and printer drivers (why not make sure those are up to date too, what have I got to lose?).  Checked the cables, the Mac firewire ports etc.  No change.
    So I bought a cheap back up firewire drive (Western Digital, My Passport Studio-about $100).  That worked perfectly on the firewire port of my Mac Pro.
    I hooked up my MOTU 828 firewire audio interface into the Western Digital's second firewire port, and everything works perfectly.
    I wish I had known that daisey chaining devices would solve my problem before I spent $500 on a new firewire interface.
    If you are having similar problems with firewire connection, then try daisey chaining through a device that has no problems.  Who knew a solution could be so simple?

  • Each time I connect to my IBM computer it crashes with blue screen error message pops up. Apple say that it's my printer/camera drivers. The problem is with iTunes, it likes to play with all the ports on my comp and conflicts with prnt drivers. How to fix

    Does anyone know how to fix this problem without disabling my printer. It's very frustrating. It's either I have my iPad or my printer. iTunes likes to play with the ports on my computer thereby causing a conflict with my printer drivers. Apple should fix this problem, I'm so annoyed.

    When this problem first happened, I searched for threads and found a few.  See be;ow links:
    http://support.apple.com/kb/TS1502
    Apple say that its a driver problem, but I've never had this problem before so I am not convinced. Another thread, which I can't seem to find, suggests that it is an apple problem - itunes plays with the ports on the company causing conflicts with existing drivers. I isolated the conflict to my new Samsung printer. I uninstalled the Samsung printer driver and then can successfully connect my ipad without the blue screen appearing.
    It's not a windows problem. Windows is working fine. Only happens when Ipad is connected. Actually, this first happened after I installed the new version of itunes. I reget installing the new itunes version, but don't know how to reinstall the previous itunes version.

  • [SOLVED]"fontconfig conflicts with fontconfig-ubuntu" and other issues

    Almost every program I have has stopped working. If I run a program from a terminal (one of the virtual terminals, gnome-terminal wont work either), they either complain about not being able to find libpng or libjpeg. I read the news posting about these and some forum posts, but none of them mentioned people having problems. What I understood from reading is that I just need to update my system.
    This is where the problem lies. I cannot run "pacman -Syu" as usual. When I do, I get the following error:
    fontconfig conflicts with fontconfig-ubuntu. Remove fontconfig-ubuntu?
    If I answer yes, I get:
    error: failed to prepare transaction (could not satisfy dependencies)
    :: kdelibs: requires phonon
    :: cairo-ubuntu: requires fontconfig-ubuntu>=2.6.0
    :: libxft-ubuntu: requires fontconfig-ubuntu
    If I answer no, I get:
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: fontconfig: conflicts with fontconfig-ubuntu
    Either way, nothing is upgraded. How can I resolve this, as well as the libpng/libjpeg issue? I cleaned my cache and tried re-installing them, but it didn't help.
    Last edited by DWilliams (2010-02-11 00:35:07)

    DWilliams wrote:
    Surgat_ wrote:
    Or you can check AUR, get the latest pkgbuilds and rebuild your -ubuntu (or -lcd) packages. After installing them, the update should go flawlessly.
    Also, if you have KDE installed you should check the news frontpage to see the KDE 4.4 announcement
    Alright I installed fontconfig-ubuntu from the AUR and that resolved my initial conflict. It started complaining about gtk-qt-engine and kdelibs and they weren't depended on by anything so I just removed them (I assume I can re-install them later) and now my system upgrade is underway. Hopefully things will be fixed when it finishes.
    Does anyone know what caused this and whether I can avoid similar issues in the future?
    It happens because you are using a modified version of fontconfig (the ubuntu one). When a new version of fontconfig reaches [extra], pacman tries to update fontconfig (because fontconfig-ubuntu provides fontconfig, and fontconfig from [extra] is newer than the version you have installed) and finds that it conflicts with fontconfig-ubuntu.
    The way to go is the one that you have followed: when there is an update in fontconfig, update your fontconfig-ubuntu package to the latest in AUR (hopefully the same version as the new one in [extra], else you'll have to wait or modify the PKGBUILD) and then update the rest of the system.

  • I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after saving as from word 2007 - I uninstalled Pro X1 and now when I save as from word 2007 to PDF it will

    Can anyone help with this - do I have to uninstall Reader and then reinstall?

    I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after "saving as" from word 2007 - I uninstalled Pro X1 and now when I "save as" PDF from word 2007 to PDF it will save the document as a PDF but will not open the document to display after publishing - I have to got to where the file has been saved to view the new PDF document - this is really annoying - do I have to delete adobe reader and reinstall it - adobe needs to look at this conflict with acrobat pro as I have even gone it to properties and tried to have adobe reader as the default PDF program - the main issue is that I cannot view the PDF after publishing it from word 2007

  • How do I delete my account, please and thanks! It is conflicting with my college's license.

    I licensed cloud month by month as an educator, then found out that my college has a license.  They installed it my machine, and Adobe cancelled my subscription.  Now I can't use my college's copy because it is conflicting with my cloud subscription.  When I go to my account to delete it, I only see the option to contact customer support, and see no way to do that.  Please help!  I have to get my work done and now our IT folks are telling me that the only way to get rid of the Adobe Application Manage on my computer is to wipe it out and reinstall everything! Yikes.
    Thanks for any help you can give.  This is just plain crazy. :-)

    I have created a small Step by Step presentation for the same. You might want to check that as well.
    https://dl.dropboxusercontent.com/u/5585693/Adobe%20Forums/Sign-in%20with%20new%20user.mht

  • How to deploy ear file with jar file and war file with different names

    Hi,
    As part of weblogic migration from WL 6.1 sp3 to WL 10, Iam facing some problem.
    Problem:
    I have one ear file(abc.ear) to deploy which contains one jar file(xyz.jar) and one war file(pqr.war).
    In config.xml file of WL 6.1, it was mentioned as :
    <Application Deployed="true" Name="abc" Path="./config/mydomain/applications/abc.ear">
    <EJBComponent Name="xyz" Targets="myserver" URI="xyz.jar"/>
    <WebAppComponent Name="pqr" Targets="myserver" URI="pqr.war"/>
    </Application>.
    The above is working fine.
    But in config.xml file WL10,I cannot mention the same.
    I need to have different application anmes for ear,jar and war.If I deploy as a ear file,the jar and war files are deployed with the same ear file name.
    I tried the following options:
    1) Deploying as a ear file by adding <sub-deployments>
    2) Deploying both war and jar seperately which is not recommended in my application.
    Please provide the content I should place in the config.xml so that everything works fine correctly.
    Any help is appreciated.

    Hi,
    As part of weblogic migration from WL 6.1 sp3 to WL 10, Iam facing some problem.
    Problem:
    I have one ear file(abc.ear) to deploy which contains one jar file(xyz.jar) and one war file(pqr.war).
    In config.xml file of WL 6.1, it was mentioned as :
    <Application Deployed="true" Name="abc" Path="./config/mydomain/applications/abc.ear">
    <EJBComponent Name="xyz" Targets="myserver" URI="xyz.jar"/>
    <WebAppComponent Name="pqr" Targets="myserver" URI="pqr.war"/>
    </Application>.
    The above is working fine.
    But in config.xml file WL10,I cannot mention the same.
    I need to have different application anmes for ear,jar and war.If I deploy as a ear file,the jar and war files are deployed with the same ear file name.
    I tried the following options:
    1) Deploying as a ear file by adding <sub-deployments>
    2) Deploying both war and jar seperately which is not recommended in my application.
    Please provide the content I should place in the config.xml so that everything works fine correctly.
    Any help is appreciated.

  • Is there a conflict with AVG 2011 and Firefox 4.0.2

    When version 4.0.1 was released there was a notice that it conflicted with AVG security software. Has that been fixed in 4.0.2?

    AVG updates for Firefox 6 (there is no Firefox 4.0.2 version)
    * http://forums.avg.com/us-en/avg-free-forum?sec=thread&act=show&id=170304
    Try Updating AVG from the System Tray icon (see the Attached Screenshot).
    Check and tell if its working.

  • Flex SDK 4 : mx.chart package and declaration of style 'direction' conflicts with previous declaration problem

    Hi There,
    We have recently downloaded SDK 4 and had configured the same for
    developement in flex builder 3, we are already using SDK 3.0. However
    to our surprise there were compile time error reported for mx.chart
    related classes. To resolve this we thought to import relevant .swc
    like datavisualization, automation from sdk 3.0, and it worked and
    resolved compile time error. But we landed up in on more problem that
    is 'Declaration of style 'direction' conflicts with previous
    declaration in E:\Softwares\FlexBuilder\sdks\SDK 4\frameworks\libs
    \datavisualization.swc(mx/charts/GridLines)'.
    If you could pleas help us to resolve these issues and also if you
    could answer these queries would be good
    1) SDK 4 has been declared to be open source, then why mx.chart
    package is not part of it?
    2) Why would 'Declaration of style 'direction' conflicts with previous
    declaration' occur?
    3) What are the other component and packages that are not part of open
    source for which license is still required?
    Waiting for reponse in anticipation.
    Thanks,

    I got this same error with the following setup.
    1. Building a SWC with Flex 4.0 Beta2 on FlashBuilder4
    2. SWC references other SWC that are built with Flex3.
    3. Define a <mx:ColumnChart id="column" ...> in a Flex4 skin.
    4. Got this compiler error. 
    Any idea if this is not supposed to work? I'm hoping I don't need all referenced swcs to be recompiled with Flex4 SDK. Some of those are external dependency that I do not have source code access.
    Thanks for any help.
    kam

Maybe you are looking for