C6 - touch panel not working

recently i purchased a c6-00 phone from uae. now the touch panel is not working. what can i do

Please contact local Nokia Care Center

Similar Messages

  • [Solved] GT70 fast access touch panel not working

    Good Morning/afternoon/evening
    I did terrible mistake by reinitializing my SSD drive which caused me to lose the OEM partitions, my Laptop used to take 3 secs to boot but now it takes up to 6 secs.
    back to my main issue,
    1- the upper touch panel is not working and I cannot use turbo button.
    2- after reinstalling windows 8.1 I got unknown device with HW ID "ACPI\VEN_ENE&DEV_0110"
    I tried to install all drivers and utils but without luck.
    best regards

    Quote from: BlueAlexFPS;103334
    I don't think you need to update EC, just install the SCM and it will works.
    did not solve the issue
    I tool it to service center already
    - - - Updated - - -
    Quote from: Tobi;103361
    Does all the quick launch buttons can't work properly? or just one? Does the button light on when you press it?
    and which Turbo button do you mean? the G button? or the cooler boost button?
    yes all of them when you press any button does not light up, I meant the cooler boost button

  • HP Pavilion model DV6 Touch Panel not working

    Hi everyone , i recently experience my touch panel freezing again so i performed a hard reset to fix the problem but after doing that both the sound and wireless icon dont show at all to touch leaving only the volume icon which is visible to touch. Even with the volume visible when i touch to reduce or increase the volume it doesnt work at all. A picture here showing how it looks like in case you dont get exactly what am saying. Anyone with the solution kindly help me out. Would be grateful
    Kind Regards
    Max

    Hello quame,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number we can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • GT70 2PC Dominator 3 x quick launch buttons fast access touch panel not working

    Hi, I bought this laptopin USA 3 weeks ago.
    Btw, excelent laptop.
    If I do F3 and fresh instal, it work all buttons at begining.... After some time, install all my app, like corel, office, adobe, ....and suddenly stop working the button.
    Only 3 buttons doesnt work.
    1st, media layer
    5th - display ON/OFF - this is the most important to me
    last one - G button, but I can run it from the taskbar icon.
    I HAVE 128GB SSD AND 1TB SATA
    My Bios info:
    bios version E1763IMS.50W
    build 05/02/2014
    ec version 1763ems1  ver 7.13
    ec bulid  03/07/2014
    is really strange, maybe the win 8.1 or other thing that was installed.
    any suggestions

    Hi, that is the big problem here.
    I have the lastest bios/ec and I already try it to reset and keep battery off for 5 minutes (remove the battery from laptop I mean)
    But the buttons doesnt works,
    I can turn on/off the items on the SCM icon running from the taskbar, except of corse the FAN button that doesnt exist.
    But the touch pad buttons doesnt work or light up when I click on them.
    bios E1763IMS.518
    ec 1763EMS1.517
    scm 13.014.06109
    what I dont understand is the date showing on the bios/ec info, that I believe should be update to 2015...
    I upload picture on my dropbox
    https://www.dropbox.com/sc/lszue2s21tqeigd/AADEhZTqxv2VlLnseocfNcTca
    https://dl-web.dropbox.com/get/IMG_1605.JPG?_subject_uid=111770444&w=AAAqfIhKpOxIo9HOwZUTQnh8bBydYQemy5h3G-xKBGjhDw

  • My iPod touch is not working in iTunes, but it is showing up on my "My Computer".

    My iPod touch is not working in iTunes, but it is showing up on my "My Computer". The instructions from Apple Support is NOT effective. Please help.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Touch pad not working with HP G60 operating on Windows 7

    I have a HP G60 operating on Windows 7 (not sure bit) and have problems with touch pad not working.
    I was using touch pad and wireless mouse interchangeably for past year.
    No recent changes made to system. Suddenly not work one evening. Have tried shutting down and left overnight which has not resolve problems.  On one occasion, i was not even able to type and that resolved after re-starting computer.
    There is a button between space bar and top of touch pad which is white. Even when i press and turn red, it has not changed situation. Therefore I have to use my wireless mouse to operate for the moment. 
    Would appreciate any advice about what is the problem and ways to resolve it.
    Thanks a lot!
    Mo

    Hi,
    The numbers are fine
    Try the following.
    First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
    Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
    When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this.  Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • IPhone 4 touch screen not working

    iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

    Good Morning S.GOPINADHAN,
    I understand your iPhone screen is black and you are not able to turn it on.  The article below will explain what to do when your iPhone is not responsive.  I'll also include instructions on how to back up your iPhone when you are able to turn it on.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    iCloud: Back up your iOS device to iCloud
    https://support.apple.com/kb/PH12520?locale=en_US
    Regards,
    - Judy

  • TS1398 Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automaticall

    Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
    Thank You.

    See:
    Can't connect to the iTunes Store

  • TS1398 the wi-fi tool on my ipod touch is not working.

    the wi-fi tool on my ipod touch is not working. i even can't turn it ON

    See here: iOS: Wi-Fi or Bluetooth settings grayed out or dim
    Note that if none of the suggestions resolve the issue, it's likely hardware related, meaning you'll need to have your iPod serviced or replaced.
    B-rock

  • The touch screen on my ipod touch is not working. meaning that i can not unlock my ipod or even turn it off. is there anything i could to to get the screen to work again?

    the touch screen on my ipod touch is not working. meaning that i can not unlock my ipod or even turn it off. is there anything i could to to get the screen to work again?

    Try # 2 and 3 in link below. If neither work, your screen digitizer might need to be replaced.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My iPod Touch is not working with Bose SoundDock.  How can I fix it?

    My iPod Touch is not working with Bose DoundDock Series II.  Can anyone suggest how I can get these 2 to work together?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      
    Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace your battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
    iPod Touch Repair – iFixit                  

  • My lock button on my 1 g iPod touch is not working???

    My lock button on my 1 g iPod touch is not working???

    Its possibly because its only a 1g iPod. I suggest you either get a newer iPod or bring it to an Apple store and see what they can do.

  • My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem.  I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

  • My ipod touch is not working at all pls HELP, my ipod touch is not working at all pls HELP

    My iPod touch is not working at all,i did everything i could and still it doesnt work,i live in the philippines my idea of solving this problem is to send it back at Apple California we do have service centre here but i dont trust them,i dont know what to do,I REALLY NEED YOUR HELP

    Quite possibly.  It wouldn't hurt to try another one if at all possible. If you have to, borrow one from a friend.  It could also be due to debris in the docking port of your iPod.  Take a look on the inside of the port and make sure there is no lint or anything like that.  Also look for broken pins as they would definitely cause connection issues as well.
    B-rock

  • My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

    My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

    My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

Maybe you are looking for