C6 with Belle fails to connect via ActiveSync

Using the same credentials as previously used (before belle) the exchange account refuses to connect.
Keep getting "Invalid Exchange ActiveSync credentials. Check credential settings."
I am using Nokia C6 and before I upgraded to belle (both with symbian and anna) I was able to sync my calendar and emails.
But, after the upgrade I started to get the error.
Recently I purchased my N8 for my wife and I thought I should try it out again on the N8 (that does not have the belle upgrade yet). The activesync worked like a breeze.
Our company certificates require user to setup the phone lock code active. I was forced to do that on N8 as soon as I setup the activesync.
But with belle, if I turn the phone lock off, it doesn't even prompt me for that. Right now I have the two phones setup exactly the same (with the lock code active). The N8 connects and syncs up just fine and C6 does not.
I see other people are facing similar issues. A fix would be appreciated.
- Amit

I contacted Nokia support and all they could offer was soft reset, hard reset and then reinstall.. none of those worked..
Looks like there are lot of people facing problems with belle and ActiveSync. Anyone has experience solving it? oh! and swype ain't the problem.
Thanks.
- Amit

Similar Messages

  • I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

    I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.  Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

    I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
    Excellent plan.
    Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
    Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
    This Apple support document will show you how to hookup and configure the second AirPort Extreme:
    http://support.apple.com/kb/HT4260

  • Does anyone get the mouse lag with an external display connected via the display port?

    does anyone get the mouse lag with an external display connected via the display port?

    You don't describe the problem in great detail.  Is this the issue you are describing?
    https://discussions.apple.com/thread/4398076?start=0&tstart=0
    If so, then, "Yes."  I have the same problem.  Note that this isn't a tracking speed problem for me, it's a lag between my hand moving and the pointer moving on the external display.
    Andrew

  • Time machine has losing contact with my external drive, connected via a USB port.

    Recently my Time Machine program has begun losing contact with my external drive, connected via a USB port. When I attempt to open Time Machine, it indicates there is no external hard drive.  When I click on "setting up time machine" it opens airport utility.   I've tried rebooting, run disk utility repairs for both hard discs, pulled and reconnected the USB cable, even completely shut down the system.    Eventually the two re-establish contact, but I'm not certain what I've done that causes this.  The lost contact appears to happen during the weekends.  The external hard drive is a MJaxtor OneTouch 4. What should I be doing to solve this problem once and for all?

    I use a little app named EasyFind - free at the App Store. It will allow you to search individual volumes or all volumes.
    Download it and see if it will help.
    Clinton

  • Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

    Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

    Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

  • Facetime "Fails" to connect via Airport Extreme using Comcast?

    Greetings,
    First time poster... tried researchings specifics on my situation and couldn't find anything so posting here to see if a solution has been found. 
    I used to have Verizon DSL for ISP with Airport Extreme as my wireless router.  Everything worked  including Facetime (only issue was the need for speed).  Switched to Comcast as ISP which uses cable and had the Tech reconnect it to the Airport Extreme to behave as the wireless router.  Internet is on and good... got a green light on the Airport Extreme.  However, when attempting to connect via any device using Facetime (it will ring but as soon as it is answered I get "Fail" message and it ends) be it my laptop, desktop or either of our iphones I have IOS7 and IOS6 respectively same error.  Did not make any modifications to Airport settings or any of my devices. 
    When checking the common response to this issue was a potential "Blocked Port" situation... but by digging a little deeper it appears that Comcast does not block ports that are relevant to Facetime (please confirm).  I didn't see anything else that would suggest a solution at this point. 
    Help would be greatly appreciated as we enjoy using facetime to have our 6 month old daughter connect to our grandparents.
    Thanks,
    Andrew

    The USB port on an AirPort Base Station other than the 802.11n model is only for use with an USB printer; hard and flash drives will not be recognized. The compatible base stations include version 5.0 of the AirPort software on a CD.
    (27846)

  • 12c design view of JSF page fails to render with 'Loading failed  Reason: Connection reset by server'

    When in the design view of a JSF page, the page never renders in JDeveloper 12c.  Instead I get an error message 'Loading failed   Reason: Connection reset by server'.  I traced this to a conflict with the port used by Cisco Anyconnect (5001) which seems to be something JDeveloper uses as well to render the page.  Is there a way to change the port used to render the page in design mode?  I could not find any settings in the preferences.

    Hi Frank,
    The proxy settings are set to use the system default proxy settings in JDev and I have not needed to change it when VPN'ed. 
    The product that is in conflict is the 'AnyConnect Web Security Agent' (acwebsecagent.exe) which runs whether I am on vpn or am in the office - it is listening on port 5001 and that is the same port jdev64w.exe is listening to when rendering the page in the design mode.  I confirmed this using netstat -ab.  After  getting the conflicting program switched off temporarily, the design mode of the page was rendered within the IDE so that I could then drop components on the design surface.
    Since I cannot get the Cisco product to listen on a different port, I am hopeful there is a way to modify the port used by JDev.
    Thanks,
    Sunil

  • OIM Database Applications Table fails to connect via GTC - Weblogic, Linux

    Environment:
    OIM - 9100 (public download)
    Red Hat Linux
    XLADM Oracle 10g
    Weblogic 8.1 SP6 - no cluster
    I have installed the Database Application Connector and am trying to configure it via the Generic Technology Connector, but it keeps failing to connect. I know those parameters are correct and have validated via sqlplus \ SQLDeveloper. Also its the exact same database (not SID) that is hosting XLADM as well, so I know it can find the machine and such. I had another previous OIM on JBoss install locally on my Windows workstation that worked fine too. I can see in the log that the DBProvisioningTransportProvider is getting the props fine and then blows up when trying to connect. I have tried even updating the ojdb14.jar drivers in XELLERATE_HOME/ext and that doesn't matter. I'm sure it's something simple, environment related, or a bug. Any help is appreciated.
    DEBUG,16 Oct 2008 09:07:44,735,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName......
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],getProviderClassName--->
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider...providerName = DBProvisioningFormat
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......1
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......2
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......2
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......6
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName.....found provider.
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName....provider class name = ..com.thortech.xl.gc.impl.prov.DBProvisioningFormatProvider
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION], provider nameDBProvisioningFormat
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION], provider def attribnull
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION], provider parm, listnull
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION], provider resp codes{DB_LOAD_DRIVER_CLASS_ERROR=The target database JDBC driver class cannot be loaded}
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName. ..found transformation provider.....com.thortech.xl.gc.impl.prov.DBProvisioningFormatProvider
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName......
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],getProviderClassName--->
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider...providerName = DBProvisioningTransport
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......3
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider name = WebServices
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider providername = DBProvisioningTransport
    DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider name = DBProvisioningTransport
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider providername = DBProvisioningTransport
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider name = DBProvisioningTransport
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider name = DBProvisioningTransport
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provider = provTransportprovider name = DBProvisioningTransport
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......6
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName.....found provider.
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName....provider class name = ..com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION], provider nameDBProvisioningTransport
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION], provider def attribnull
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION], provider parm, list[name: driver, datatype: String, encrypted: false, type: Runtime.
    validValueList is following
    , name: url, datatype: String, encrypted: false, type: Runtime.
    validValueList is following
    , name: username, datatype: String, encrypted: false, type: Runtime.
    validValueList is following
    , name: password, datatype: String, encrypted: true, type: Runtime.
    validValueList is following
    , name: connectionProp, datatype: String, encrypted: false, type: Runtime.
    validValueList is following
    , name: parentContainerName, datatype: String, encrypted: false, type: Design.
    validValueList is following
    , name: childContainerTableNames, datatype: String, encrypted: false, type: Design.
    validValueList is following
    , name: parentContainerUniqueKey, datatype: String, encrypted: false, type: Design.
    validValueList is following
    , name: statusField, datatype: String, encrypted: false, type: Design.
    validValueList is following
    , name: statusLookupCode, datatype: String, encrypted: false, type: Design.
    validValueList is following
    , name: dbDateFormat, datatype: String, encrypted: false, type: Design.
    validValueList is following
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION], provider resp codes{DB_GET_METADATA_ERROR=The target database schema detection failed, DB_UPDATE_CHILDRECORD_ERROR=A database error was encountered during a row update in a child table, DB_COL_DETECTION_ERROR=The column information of the database table cannot be detected, DB_UPDATE_EMPTY_RECORD_ERROR=Empty record cannot be updated. Please ensure to run reconciliation task to bring the systems in sync., DB_OP_NOTSUPPORTED=This operation is currently not supported, DB_TYPE_DETECTION_ERROR=The type of the database column cannot be detected, DB_LOAD_DRIVER_CLASS_ERROR=The target database JDBC driver class cannot be loaded, DB_FK_DETECTION_ERROR=The foreign keys of the database table cannot be detected, DB_CREATE_CHILDRECORD_ERROR=A database error was encountered when inserting data into a child table, DB_UPDATE_PARENTRECORD_ERROR=A database error was encountered during a row update in a parent table, DB_DELETE_EMPTY_RECORD_ERROR=Empty record cannot be deleted. Please ensure to run reconciliation task to bring the systems in sync., DB_CREATE_PARENTRECORD_ERROR=A database error was encountered when inserting data into a parent table, DB_CHILD_FK_ERROR=The child table does not have foreign keys that reference to the parent table, DB_ROWCOUNT_ERROR=A database error was encountered when retrieving the row count from a resultset, DB_DELETE_RECORD_ERROR=A database error was encountered when deleting data from a parent table, DB_DELETE_CHILDRECORD_ERROR=A database error was encountered when deleting data from a child table, DB_PK_DETECTION_ERROR=The primary keys of the database table cannot be detected, DB_PK_UPDATE_ERROR=The process form key field update is not supported}
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName. ..found transformation provider.....com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
    DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
    DEBUG,16 Oct 2008 09:07:44,737,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize entered.
    DEBUG,16 Oct 2008 09:07:44,737,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: driver - Value: oracle.jdbc.driver.OracleDriver
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: url - Value: jdbc:oracle:thin:MyIP:1521:MySID
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: username - Value: my_user
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: password - Value: *******
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: parentContainerName - Value: MY_USER_TABLE
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBReconTransportProvider/convertCSVToArraylist entered.
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBReconTransportProvider/convertCSVToArraylist - Data: Run Time Parameters - Value: []
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: childContainerTableNames - Value: []
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: parentContainerUniqueKey - Value: USER_ID
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: statusField - Value:
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: statusFieldLookup - Value:
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize left.
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: dbDateFormat - Value:
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/defineMetadata entered.
    DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBFacade/getConnectionProp entered.
    ERROR,16 Oct 2008 09:07:44,739,[OIMCP.DATC],Class/Method: DBFacade/getConnection encounter some problems: Io exception: The Network Adapter could not establish the connection
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
    at java.sql.DriverManager.getConnection(Ljava.lang.String;Ljava.util.Properties;Ljava.lang.ClassLoader;)Ljava.sql.Connection;(Unknown Source)
    at java.sql.DriverManager.getConnection(Ljava.lang.String;Ljava.util.Properties;)Ljava.sql.Connection;(Unknown Source)
    at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:51)
    at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
    at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:771)
    at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:95)
    at com.thortech.xl.gc.impl.common.DBFacade.getConnection()Ljava.sql.Connection;(Unknown Source)
    at com.thortech.xl.gc.impl.common.DBFacade.getMetadata()Ljava.sql.DatabaseMetaData;(Unknown Source)
    at com.thortech.xl.gc.impl.common.DBFacade.getDBType()Ljava.lang.String;(Unknown Source)
    at com.thortech.xl.gc.impl.common.DBFacade.getSchema(Ljava.lang.String;Ljava.lang.String;Ljava.util.ArrayList;)Lcom.thortech.xl.gc.impl.common.Schema;(Unknown Source)
    at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getSchema()Lcom.thortech.xl.gc.impl.common.Schema;(Unknown Source)
    at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.detectMetadata()Lcom.thortech.xl.gc.vo.designtime.TargetSchema;(Unknown Source)
    at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.defineMetadata()Lcom.thortech.xl.gc.vo.designtime.TargetSchema;(Unknown Source)
    at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter(Lcom.thortech.xl.gc.vo.designtime.GenericAdapter;Lcom.thortech.xl.webclient.actions.CreateConnectorForm;Ljavax.servlet.http.HttpSession;Ljava.util.ArrayList;Lorg.apache.struts.util.MessageResources;)Lorg.apache.struts.action.ActionErrors;(Unknown Source)
    at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
    at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
    at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
            at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
            at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
            at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
            at com.thortech.xl.webclient.actions.tcActionBase.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
    ERROR,16 Oct 2008 09:07:44,739,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/defineMetadata encounter some problems: DB_GET_CONNECTION_ERROR
    com.thortech.xl.gc.exception.DBException: DB_GET_CONNECTION_ERROR
    at com.thortech.xl.gc.impl.common.DBFacade.getConnection()Ljava.sql.Connection;(Unknown Source)
    at com.thortech.xl.gc.impl.common.DBFacade.getMetadata()Ljava.sql.DatabaseMetaData;(Unknown Source)
    at com.thortech.xl.gc.impl.common.DBFacade.getDBType()Ljava.lang.String;(Unknown Source)
    at com.thortech.xl.gc.impl.common.DBFacade.getSchema(Ljava.lang.String;Ljava.lang.String;Ljava.util.ArrayList;)Lcom.thortech.xl.gc.impl.common.Schema;(Unknown Source)
    at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getSchema()Lcom.thortech.xl.gc.impl.common.Schema;(Unknown Source)
    at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.detectMetadata()Lcom.thortech.xl.gc.vo.designtime.TargetSchema;(Unknown Source)
    at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.defineMetadata()Lcom.thortech.xl.gc.vo.designtime.TargetSchema;(Unknown Source)
    at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter(Lcom.thortech.xl.gc.vo.designtime.GenericAdapter;Lcom.thortech.xl.webclient.actions.CreateConnectorForm;Ljavax.servlet.http.HttpSession;Ljava.util.ArrayList;Lorg.apache.struts.util.MessageResources;)Lorg.apache.struts.action.ActionErrors;(Unknown Source)
    at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
    at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
    at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
            at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
            at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
            at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
            at com.thortech.xl.webclient.actions.tcActionBase.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
            at com.thortech.xl.webclient.actions.tcAction.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
            at com.thortech.xl.webclient.actions.CreateConnectorAction.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
            at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
            at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
            at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
            at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1077)
            at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
            at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(Unknown Source)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
    Caused by [Nested Exception]:

    shouldn't the connect string look like jdbc:oracle:thin:@MyIP:1521:MySID ?

  • E55 fails to connect via cable or turn on Bluetoot...

    Good afternoon!
    I have the following problem with my E-55:
    I was often using the phone as a modem, connecting it with a cable and using Nokia Suite. Some 2 months ago the computer (and Nokia Suite) suddenly stopped recognising that a phone was connected (it remained undetected, although the battery was beginning to charge). But it was still connecting via Bluetooth.
    About a month later a problem emerged with the phone's memory. Although all apps were installed on the memory card, and text messages occupied some 300kB, NetQin Mobile Guard was only finding 4.5kB files to delete from cache and I was constantly receiving an alert about lack of memory. I couldn't send text messages (although I could receive them), add new contacts, edit calendar entries or change mailbox settings (the e-mail boxes were empty). I could still use the phone as a modem connecting it via Bluetooth.
    The day before yesterday, for the first time I couldn't turn on Bluetooth, but when I closed all apps (using NetQin Mobile Guard to do that), it worked.
    But yesterday it didn't. I did a hard reset. The phone is working, now has over 50MB free memory (compared with the mere few kB earlier). But it still doesn't connect with the computer via cable, and I still can't turn BT on (alert: Cannot carry out Bluetooth operation).
    1. What can be the reason?
    2. Can it be repaired? (I expect deep reset does the same as hard reset, so won't change much?)
    3. If not, is it possible to carry over contact and setting backup from Nokia Suite (in .nbu format; I expect it would have to be converted) into the phone and running it without connection with Nokia Suite?
    Loads of thanks in advance for your help!
    Cheers!
    -Mike

    Hi m_b_p,
    Thanks for your post!
    We're sorry to hear that your device has suddenly become unresponsive to activating the bluetooth. A wire connecting the bluetooth part to the phone may have been dislodges some how. As you have performed a hard reset, we suggest you to take your device to your retailer or Nokia Care Point to have it inspected. 
    You may need to bring a proof of purchase.
    Let us know how you get on with this.
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • 10.5.2 - cannot print with Samsung CLP-510 connected via Airport

    After 10.5.2 Leopard upgrade, the printer Samsung CLP-510 prints only if it's connected directly to my MacBook (or my PowerBook), not if it's connected via Airport (Extreme): the printers become soon busy and give the message "Device busy, please retry...", and after some time the printer print an error page with "timeout" error.
    No luck resetting the Airport.
    Any workaround, please?
    Thanks in advance
    Salvo

    These steps may help:
    1. Open System Preferences and click on the "Print & Fax" icon
    2. Click on the "+" button to add a printer
    3. Click on the "IP" button in the toolbar
    4. Choose "HP Jetdirect - Socket" from the "Protocol" option menu
    5. Enter the hostname or IP of the Airport base station in the "Address" field - typically 10.0.0.1 or your base station name with ".local" on the end
    6. Leave the "Queue" field blank
    7. Replace the auto-generated name with something meaningful to you in the "Name" field
    8. Choose "Select a driver to use" from the "Print Using" option menu, and then type in the model number for your printer to locate the corresponding printer driver
    9. Click "Add" to add the printer, then try printing
    If you report back with your results, it would be appreciated.

  • Airport Extreme with 2TB WD HDD connected via USB

    Hello all, have just joined this discussion group. I had been a windows user for several years now until recently when I replaced my laptop for Macbook Pro 13".
    MAC OS is good and stable. As my MAC HDD is only about 250 GB, it is not sufficient for my media files both Photos, Music & Video. Hence, I purchased a 2TB WD Essential USB Hard drive for storing the media files and using it as the backup for Time Machine. I want to use my media files both in my Mac as well as my IBM Thinkpad (Office), I decided to buy N class Router and connect the HDD which would enable me to share. However, I failed on my ideas as the Netgear Router N600 WINDR3700 does not support HFS+ File System! I was not willing for Fat32, but tried that too, the file transfer speeds are very slow.
    Now I am thinking as to whether return this WINDR3700 Router and buy Airport Extreme in-lieu of that. My questions are as follows:
    1) Does Airport Extreme support 2TB HDD via USB ? I assume it will support HFS+ FS.
    2) Would I be able to configure Time Machine for Backups to this HDD attached to the Airport Express ?
    3) Could I configure iTunes & iPhotos to store Media & Image Files Library in this HDD instead of my local Mac HDD ?
    4) How is the Speed of File Transfer to this HDD ?
    5) How is the Speed of Internet in N class in Airport Extreme ? I currently use a 50 Mb DSL ?
    I am even prepared to reformat my entire MAC and reinstall everything again based on your suggestion if there is a need.
    My decision to buy Airport Extreme is based on all of you users valuable inputs.
    Thanks in anticipation of your support.
    Cheers, Sriram

    Wow, and I thought my problem connecting to the Extreme router to my Kodak wireless printer was the problem.  You have multiple printers from various manufacturers that won't connect wirelessly.  I hope you get a reply that will help us both.  My printer finds theappropriate network but the Security Kkey (password), that works with my other connected PC's, does not connect the printer.  Ron

  • IPhone 5S with ios8 fail to connect my Bluetooth car audio system

    Dear apple users and developers,
    I have read many threads about this issue mostly for iPhone 5 (ok i have the 5S) perhaps this makes a difference. With the ios7 i had no issue and always connected to my MHV-8300BT Pioneer device in my car. After update, when i get connected, i says "Calling My number" and when i push the button on my device to answer it drops the line, it keeps the connection but i do not hear, speak. Then i have to change the source voice system and i set the speaker or the iPhone.
    On my fathers Bluetooth, a Motorola, it works, at the beginning i made a reset only for the Network settings,
    Do not know what else to do
    Thanks for reading my post
    Nikos

    Hi MJM 1,
    If you are having issues pairing your iPhone 5s to your car audio system via Bluetooth, you may find the following articles helpful (the first article also includes instructions on removing paired devices):
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/ht1664
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/ts3581
    Regards,
    - Brenden

  • Internal modem failing to connect via dial-up

    I'm new to posting questions. Every time I try to connect using dial-up I get the message failed to detect dial tone. I tried to connect in different buildings and using new phone line (wire?) with no success. Tonight I created a new location in network preferences, tried and failed. Created a new user as a test, tried and failed. I cannot try in another building for a day or so. Anybody able to help? Thanks.

    Hi Again starlite!
    I hope you're feeling better.
    Have you ever been able to connect with the PowerBook?
    I don't know about your PowerBook, but on my iMac, the Modem port & the Ethernet port look very similar. Make sure you haven't inadvertently plugged into the Ethernet port.
    Below is how I set my Network Preferences, using AOL. I don't know if the same configuration will work for you, but it may help to compare how yours are set. What ISP are you using? I'm guessing that you're on campus.
    If you have any questions, please ask them before preceeding.
    First, be sure you know what version of Modem you are using.
    Disconnect from the Internet.
    Navigate to:
    HD > USERS > YOUR HOME > LIBRARY > PREFERENCES
    If present, move to Trash:
    com.apple.internetpref.plist (a file)
    com.apple.internetconnect.plist (a file)
    com.apple.internetconfig.plist (a file)
    Don't empty the Trash just yet.
    Before you change the settings below, you might want to make notes, or take screen shots of your present configurations.
    Then, open System Preferences > Network
    Location: Select "Automatic"
    Show: Select "Internal Modem"
    On the PPP screen, click PPP Options. UNCHECK ALL options
    On the TCP/IP screen, Configure using IPv4: Select "Using PPP"
    On the Modem screen, Select your modem from the list. I'm using an iMac (Summer 2001), and I have "Apple Internal 56K Modem (v.90)" selected.
    Check "Enable error correction and compression in modem"
    "Wait for dial tone before dialing"
    "Dialing": Tone
    "Sound": On
    "Show modem status in menubar" (This isn't necessary, I just like to keep track of it)
    Also select your Country.
    Then, still in "Network" preferences,
    Location: "Automatic"
    Show: "Network Port Configurations"
    Make sure "Internal Modem" is checked and at the top of the window.
    Click "Apply Now" at the bottom of the screen.
    Quit System Preferences.
    Sometimes changing the access number that you use will also help. Do you know how to do that?
    Good Luck!
    ali b

  • Canon MX860 Fails to connect via wifi

    Our MX860 suddenly stopped working. It's been a reliable printer on our home network for a few years now.
    "Support code 300: The printer does not respond..."
    I turned it off/on, which has been sufficient to resolve any hiccups in the past. No change.
    I restarted the primary Mac (an iMac running 10.8.5). No change.
    I downloaded the latest driver from Canon and installed it. No change.
    I downloaded the Canon IJ Network Tool and connected to the printer via USB and ran through the setup process. It seemed to go smoothly, but at the end where the network version of the printer and scanner are supposed to appear in the Default section of the Add dialog for adding a printer, no dice. The USB printer and FAX entries are there, but no new network printer or scanner entries to select.
    On the front panel of the printer in the WLAN setting list it reports:
    Connection: Active
    SSID: <mywifinetwork>
    Communications mode: Infrastructure
    Channel: 6
    Data encryption: AES
    Network authentication: WPA2-PSK
    WEP bit: Disable
    IP address: 10.0.1.191
    Subnet mask: 255.255.255.0
    Default gateway: 10.0.1.1
    MAC address: 00:00:85:F5:DA:A1
    Any tips/insight on what I should try next would be appreciated.
    Thanks!

    Try turning off the power again, but this time disconnect the power cord and USB cable for 5 minutes.
    Then reconnect the power cord and turn on and check the network settings (in case the IP address has changed - it should not have but check anyway). Then open Network Utility (Applications > Utilities) and select the Ping tab. Enter the IP address of the MX860 and press Ping. You should get a ping response for each packet sent. If you do, then it shows there is a working path between the Mac and the MX. If there is no response, then there is an issue with the wireless connection between the Mac and the MX.

  • Does anyone else (or has anyone else) had an issue with their wireless keyboard connecting via the Bluetooth?

    The first day I got it, it was fine. Then when I woke up the next day which was less than 12 hours after hooking it up, it wouldn't connect..it let me type a couple of characters to my password, but then literally stopped. My trackpad has yet to have any issues whatsoever. Even during the keyboard malfunctioning it's been fine. In order to get the keyboard to work, I have to log into the guest account, let it be discovered, then pair it. It as now happened on 4 different days, more times than that, though. I've only had it for just over a week. I don't think there's a problem with the computer just because the trackpad is fine. The keyboard blinks that little green light when it's having this issue, too. As you know, it's normally off. Today I tried to log in for the first time and it did the same thing as the first day. It let me type a few characters, then stopped and wouldn't connect. This time, though, when I went into the guest account to let it be discovered it wouldn't let me type the numeric code to pair it. I had to hold down my power button to restart it because I was logged in on another user and it wouldn't let me restart it the normal way without typing the admin username/password...which I obviously couldn't do seeing as how I didn't have a keyboard. Does anyone else think this is a faulty keyboard I need to return? Or is this unfortunately how it works...or what? Help please...
    I was at the Apple Store that week 5 times for a messed up phone that they replaced with a total of 4 replacement phones because of different issues the ones they gave me had and driving there that much almost made me say screw it to the iPhone...now I buy this very expensive iMac spending 2 grand and this happens....I'm so mad I am thinking of just returning it and giving up on Apple altogether which Idon't WANT to do...but with all I've dealt with in a 2 week period with the iPhone and now this...oh and I bought a $100 cell phone case I had to replace because it wasn't working correctly. So you see, I am beyond frustartee over Apple.....if anyone could help I'd greatly appreciate it. With all of my problems I've had, you'd think they want to do more than apologize for my inconvenience. Even the techs that helped me said it was ridiculous I've had so many issues and now I'm just adding to the list..

    Try this:
    Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
    If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse.  ONce the computer starts up again, wait for the pop-up looking for a mouse.  Turn on the power to the bluetooth mouse.  It should work normally now.

Maybe you are looking for