C6180 All In One Photosmart. Software and drivers will not install on Windows 8.

C6180 All In One Photosmart
on
Windows 8 64bit
Acer Aspire V5-552PG
AMD A10- 5757M
Radeon HD 8750M dedicated
Software and drivers package will only unpack but not install.
When the unpacking bar reaches the end, it disapears without any following actions.
I have of course tried it over again many times, and I have deleted the download and redownloaded it again but the same happens every time.
Any idea on how to solve this?
Sincerly
FLFO

HI FLFO:
I have done some research on your post. I have found a document with steps to help resolve the stall you're experiencing during your printer installation.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&lc...
Happytohelp01
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7 in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
Any ideas on how to get this product installed in Windows 7 ?

I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

Photosmart C6180 All-In-One...Black Ink will not print...the page is almost blank

The Printer seems to work correctly, but the page is almost blank. The only exceptions are a few faint characters, and sometimes a light line down the side of the page. Can you please help? The printer has not had much mileage.
Thanks,
Ross

I ran all those tests and did all the upplugging, turning off, etc. Do not think is a software / connection problem. Somehow I think the issue is in the black print head. All ink levels are very good. In the past, I have been running the printer with the print settings in the software at ... print in Greyscale / Black Only. Though the old black cartridge showed plenty of ink, I put in a new black cartridge and that is not the problem.
Even when I put a paper on the glass to copy and use the black copy button, it prints very faintly...almost not even there. Yet when I copy by pushing the Color Copy button on the printer and use a color original, colors seem to show up better.
I have used the tool, clean print heads, several times. There is a lot of ink in the squares, but it is all color. My gut is somehow the black print head is still plugged, or something like that. Though it says to use the "clean print heads" sparingly because it uses up ink, I saw in the self help to do this 3 times or more.
What can I do to get the black print head to print? I appreciate your comments. My wife is ready to toss it and move on.
Hope you have a good weekend.
Thanks,
Ross

Software and drivers won't install on windows 8.1!!

I have a new computer running windows 8.1. After downloading the printer software for my all in one C4580, the files extract but then nothing happens. I've run the scan doctor and the install wizard and the same thing happens with those downloads. Hence, I have no way to install the software. In task manager the setup.exe is running and using alot of CPU's and so I ended the task. Went through the download and all the "fixes" and still with no luck. I've tried connecting my printer with the USB cable to see if that might help. It didn't. Please, I need help!

Hello ithacagoddess
Welcome to the HP Forums!
I understand the software will not run once it extracts. I will do my best to assist you! I am going to provide numerous suggestions that could assist you.
Please complete all of your Windows Updates. Doing this could install, or repair, what is necessary to resolve the issue. Use these steps when installing your updates:
1. Open "Windows Update" in Control Panel.
2. Click "Settings", and then click "Install optional updates".
3. Next, click "Check for updates".
Next, I will have you install the latest redistributable package. This is the latest version and should be installed. This is very crucial towards the success of the installation. Please download and install if from this link: Visual C++ Redistributable Packages for Visual Studio 2013
There have been certain .dat files that have been known to cause this issue. They are HPOIN*.DAT and HPWINS*.DAT. Deleting whatever of these files exist could resolve the issue. To do this, go to the Charms Bar, then search and %WINDIR% and hit Enter. Once the %WINDIR% window is open, look for any files that state with HPOIN or HPWINS and delete them.
If you have McAfee Live Safe installed, this program might be causing the issue. This software directly interferes with our printer software. Disabling the entire program should be done. The Spyware Realtime Scanner is the particular function that causes these issues.
In addition to disabling that program, you can perform a clean boot to disable everything else that might cause an issue. Here are some instructions on how to do this: Performing a Clean Boot in Windows
At this point, I would try reinstalling the printer software. Please use the Printer Install Wizard when installing the software: HP Printer Install Wizard for Windows
Please respond to this post after you try everything! I do have additional troubleshooting to suggest if this fails. Thanks for choosing the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Rescue and Recovery will not install on Windows 7 upgrade

I have a thinkpad SL500 that I upgraded from Vista to Windows 7 a week ago. I have tried to install Thinkvantage Rescue and Recovery but get this error message during the initial install: "Rescue and Recovery does not support installing from the operating system which upgrade from legacy preload system."
I did load Win 7 32 bit from a legacy Vista preload system. I have been trying to install R&R v4.5. Is there a workaround to get ThinkVantage R&R on this Windows 7 machine? Thanks, John

Win 7 does come with it's RE environment. On my pc I can:
(1) boot into windows 7 (default)
(2) PF8 boot windows into Safe mode, which will allow me to Launch the Windows recovery environment. This is
mostly a Repair environment, but can invoke other items, such as Windows restore. This is NOT an restore from backup tool , per se.
(3) PF 11 boot into RNR standalone environment.
All 3 have Bootable software on my C drive, and entries in the BCD (boot control data). Could you document what your pc/laptop was shipped with from Lenovo. An original windows vista or windows 7? A shipped Lenovo, with win 7,should have a Z partition and a X partition. One has the RNR standalone, the other has the Factory install data to reset back to OBE, out of the box experience.
Did you purchase a WIN 7 DVD upgrade disc from a retailer? Could you also post a screen shot from Disk management that shows the attributes of the D drive. I am trying to find out if the D drive is Active
Check under the status line, HEALTHY(Active,primary partition). Did you try the Diskpart command?.
You do not need to worry about SYSPREP. It is mainly an Administrator tool for deploying system images.
By the button, do you mean the Thinkvantage blue button? This just tells the BIOS to boot into the RNR standalone environment. My original system was a Vista. Thus I have no experience verifying the X and Z drives. This info is just from reading other posts.
===
As a side note, Does your win 7 support Bitlocker? Can you view the contents of YOUR D drive?

HT203345 quicktime and itunes will not install on windows 7 (64) ?

I have been trying for hours and hours to download and install Quicktime/iTunes on a PC with windows 7 (64bit).
It installs until 'Publishing Product Information' then it says congratulations its loaded. then I get :
Apple application was not found.....Apple Application Support is required to run iTunes Helper, please uninstall iTunes and the install again.
which I have over and over and over for hours and hours.
all I want to do is install Quicktime for Windows can someone please help me with what I am doing wrong ?
Regards.

Hello db133,
Thanks for using Apple Support Communities.
From your post I understand that you're unable to open iTunes after installing it due to an error with the Apple Application Support. I see that you've gone through and reinstalled multiple times, but there are specific steps for removing and reinstalling iTunes which I think would help resolve this issue. Those steps are found in the article linked to below.
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
Have a great weekend,
Alex H.

HT4759 iCloud and iTunes will not install on Windows 8

I've had to upgrade to Windows 8 and I cannot get either iTunes or iCloud to install.
I have tried:
-installing as Administrator
-installing in Compatibility Mode as Windows 7
-installing as Administrator in Compatibility Mode
-disabling my firewall while doing the above
Does anyone have any more suggestions? I really need to be able to connect my iPhone and offload photos and organize my music again.
Thanks,
Lisa

Thank you for your beautiful input.
If you wrote that it wasn't a fresh installation, I missed it.
Of course, for removal of iTunes and its re-installation there is a comprehensive document.
Which is quite an involved procedure and all 'Apple' components have to be removed in specified order, removal verified and then iTunes installed.
Regards

C6180 All In One Printer only prints 1 page per document after Windows 7 64 bit upgrade

I loaded the software for my Photosmart C6180 all-in-one printer as part of a computer upgrade from Windows XP to Windows 7. My printer is networked and everyone else in the house can print to this printer with no problem. However, whenever I try to print a document I only am able to print the last page of a multiple page document. I have uninstalled and reinstalled the driver/software package multiple times to no avail.
Any suggestions? Thank you.

This document may offer some help:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02002372&lc=en&product=1153494&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

My phone was updating the new software and now will not turn back on, what do i do?

my phone was updating the new software and now will not turn back on, what do i do?

Never fear, help is here jpeterson4! Have you attempted to plug your device into your home computer? Have you verified that the device is charged? Does anything appear on the device when you plug the device into a charger? Please keep us posted, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT

HT5654 I am trying to update my itunes software and it will not update.

I am trying to update my itunes software and it will not update.

Hi Oleruss32,
Welcome to the Support Communities!
The article below may be able to help you with this.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
- Judy

Canon 5030 advanced printer drivers will not install on my hp dv6000 laptop

my company is trying to install their canon 5030 advanced printer drivers onto to dv6000 laptop so i can print at work and they will not install. there are no error messages it just won't install. i do not, cannot get a new laptop. i need to make this work. HELP
my os is xp sp2 with most recent updates installed.

You would probably get better luck with your question if you post this on the HP Notebook board as this board mainly deals with hp printers and the Notebook board will help with your HP Laptop.
Good Luck !
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

TS3212 i had to reinstall iTunes and it will not install

i had to reinstall iTunes and it will not install it keep on relling back

You won't be able to install your original Acrobat 7 at all, or use your original serial number. The server which used to allow this was switched off.
But assuming you have a compatible system, like Mac OS 5 or Windows XP, licensed users of Acrobat 7 can download a replacement and get a replacement serial number.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

HT1338 I have iMac 105.8 and want to upgrade to Snow Leopard, so got the disc from apple on line store and it will not install, just keeps ejecting from my desktop

I have iMac 105.8 and want to upgrade to Snow Leopard, so got the disc from apple on line store and it will not install, just keeps ejecting from my desktop

You have entirely too little free space on the boot drive, for best performance it's best to have hard drives only 50% filled max and never more than 80% filled.
See Storage Drive here and reduce some space also make a seperate bootable clone backup of all your data BEFORE upgrading
Most commonly used backup methods
see here for how to find your disk space
Why is my computer slow?
If you upgrade and it doesn't go right or slows the machine down you might need to erase and install, which all your programs will have to be reinstalled from original sources and files from backup.
How to erase and install Snow Leopard 10.6
If you can't do this, then hire a local PC/Mac specialist.
Do not upgrade to 10.7 or 10.8 on that older machine, it will slow down and you will lose all your PPC based programs.
Leave the Lions for a brand new machine with a SSD drive.

I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone

I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone know where I can go for help?

You won't be able to install your original Acrobat 7 at all, or use your original serial number. The server which used to allow this was switched off.
But assuming you have a compatible system, like Mac OS 5 or Windows XP, licensed users of Acrobat 7 can download a replacement and get a replacement serial number.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

C6180 All In One Photosmart​. Software and drivers will not install on Windows 8.

Similar Messages

Maybe you are looking for

C6180 All In One Photosmart. Software and drivers will not install on Windows 8.