C6180 All In One Printer only prints 1 page per document after Windows 7 64 bit upgrade

I loaded the software for my Photosmart C6180 all-in-one printer as part of a computer upgrade from Windows XP to Windows 7. My printer is networked and everyone else in the house can print to this printer with no problem. However, whenever I try to print a document I only am able to print the last page of a multiple page document. I have uninstalled and reinstalled the driver/software package multiple times to no avail.
Any suggestions? Thank you.

This document may offer some help:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02002372&lc=en&product=1153494&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Similar Messages

Deskjet 3050 All-In-One J610 only prints blank pages

Hi,
All of a sudden, my printer stopped printing. The ink levels in the cartridges look fine in the HP utlity, and I did the self-cleaning steps, but when I print something, only a blank page comes out. There is some ink around the edge of the paper, though, but nothing on the actual page.
Any idea how I can fix this?
Thanks.

Hello jennydel,
Welcome to the HP Support Forums!
Cleaning the printheads is a great way to resolve print quality issues on the Deskjet 3050. On the cleaning page, does anything print on it?
In this HP document: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems you will see the full HP suggested troubleshooting steps. I hope they are able to help get the printer working again.
Thanks for posting.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Photosmart C6180 All-in-One won't print magenta or light magenta, even with new cartridges

The printer suddenly stopped printing magenta and light magenta. I installed new cartridges from LD, which have always worked in the past, but none worked. No error messages.

Hi there @Optical32 and welcome to the forums
I read about how your Photosmart C6180 is no longer printing in light magenta and magenta, with no error messages. I'd like to offer my suggestion for you that may help.
Click this link and try these steps: Color Mix or Missing Colors on the Diagnostic Page
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Photosmart All in one C4780 Printer prints only blank pages, connected to a MacBook Pro

My Photosmart C4780 all in one printer which is connected by USB to my MacBook Pro OS 10.6.8 prints only blank pages, and no text; I have turned it on and off; disconnected and reconnected; uninstalled the HP software and reloaded and updated drivers, firmware and patches. The scan function works and scans the document to my Mac. The copy function also does not work; when I press the OK function next to the copy icon, nothing happens

Hi mpmehta
I understand you are not able to print in black and the copy function isn't working.
I will be happy to assist you with this.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
Try and print a hardware self test on the printer to find out if it is a hardware or
software issue. Click Here.
I have included a document for not being able to print in black.
Here is a document for the copy function not working.
If you require further assistance please provide the following so I can assist you better.
Did the configuration page print?
Any black print on the page?
What are the ink levels?
Are you getting a error when trying to copy?
Please let me know the results.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I am using window.print() to print the data of my webpage, it prints only first page and left the remaining while it works fine with IE and Google Chrome, ie print all the pages.

My Page has data more than one page, it has verticle scroll bar to view all data .
I used window.print() to print the data of webpage, but it prints only first page and left the remaining information.
This works fine with Internet Explorer 6+ and Google Chrome.

Does the entire webpage appear in Print Preview? <br />
File > Print Preview

I upgraded my AirPort to 5.6.1 and can no longer print to my HP Photosmart C6180 all in one printer from my MacBook? - help.

I upgraded my Airport to 5.6.1 and it stopped printing from my HPPhotosmart c6180 all in one printer. I have a Macbook with version 10.6.8
I also have a Xfinitiy internet connection. Help

Figured out that as long as a scan is unreadable & RAW, it can never be used or open. Boo.

Have a HP C6180 all-in-one and I can never really do printing on bot sides of paper, even when it is selected in my i Mac all in one

Have a HP C6180 all-in-one and I can never really do printing on bot sides of paper, even when it is selected in my i Mac all in one

HI,
You should be able to just leave it on, it should have a sleep mode which it will enter after a while.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

IPhone 4 print coupons from app Grocery ID directly to my HP Photosmart C6180 All-in-One BUT

iPhone 4 print coupons from app Grocery ID directly to my HP Photosmart C6180 All-in-One BUT the iPhone cannot find the wifi printer when I try to print from email or Safari or Contacts, etc.
Why doesn't HP list this printer in the approved list? They have the HP Officejet listed and many photosmart printers as well.
This question was solved.
View Solution.

No, its not that easy. AirPrint is a "driverless" print environment and must have hardware and firmware support in the printer to be able to print. Other apps are more of a traditional driver-based print apps and can find and print to the printer on a network without it having to support AirPrint.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Why do I have to continually redown load the driver for my c6180 all in one printer every few months

why do I have to continually redown load the driver for my c6180 all in one printer every few months

Please read this post then provide some details. What operating system? Are there any error messages on the printer or computer screen when printing fails?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Blasted printer problems - HP Photosmart C6180 All-in-One

Bought a spanking new HP Photosmart C6180 All-in-One and installed the drivers. When running the HP Setup Assistant it had a blank list to select from.
I came across this tip from macosxhints.com
"If your system drive was set up with a case-sensitive HFS file system, HP's All-in-One installer will fail when it gets to the HP Setup Assistant -- it will ask you to "Select Device" and give you an empty list. To get the installer to work, you have to install it on a case-insensitive file system. I've confirmed this with version 7.9.1 of the PhotoSmart C6100 series and version 7.9 of the Officejet 7310 series drivers.
The solution? The only one I've found is to re-format and install on a file system that is not case sensitive. After hearing back from HP's tech support, they confirmed the problem and the solution:
Thank you for contacting HP Total Care.
The software for the Photosmart C6180 is not supported on a case sensitive partition. You will have to install the drivers on a case-insensitive partition.
I only wish they had mentioned that anywhere in the online troubleshooting section. Sigh." http://www.macosxhints.com/article.php?story=20070623004646642
Can someone point me in the direction of:
"Setting up a case-insensitive partition"
thanks!

post not answered

Photosmart C6380 only prints the last page in documents

My printer only prints the last page of multi page documents. To choose more than one page in a page interval in the print menu does not help, but it is possible to print all pages in a document if I only print one page at a time which takes forever for longer documents. I use Windows 7 64 bits and it used to work until the end of 2011. If I uninstall drivers and reinstall, it sometimes work for a short while and then the problem comes back. All my drivers are updated and I run the printer on wifi.

Just to add some information: I do not get any error messages, blinking lamps or anything like that. I've got the same problem independent of file-format as it seems. I have tried word-files, pdf-files and to print from the web browser Explorer.

Printer will print only partial page

I have a HP all in one printer C6250. Sometimes but not always it will print only a partial part of a page or just select information. For instance, I tried to print out a request form for an absentee ballot and it printed only the bottom part of the page. All the print on the page was the same.
The day before, I printed out some concert tickets and airline tickets (in color) and they printed fine.
Last week, I tried to print a rebate form and only parts of the form printed (mainly the top part).
I have the latest drivers as I ran a test and all ink cartridges are full. I have to admit that I don't have all HP cartridges but the black one is an original one.
I also ran a print test page today and only the header printed with some partial character marks under.
I have windows vista operating system.

My HP C6380 printer only prints a partial page in Excel or Publisher. All others print fine. K

HP printer only prints blank pages from Word or Pages

My HP all in one printer only prints blank pages from Word or Pages documents, prints ok from anything else. Any ideas? Have deleted and readded printer removed HP software reinstalled software from Apple etc. Help please!

If this just happens from these two programs, it's most likely a driver conflict. If typically using an alternate driver will alow you to get around this. To try this, add the printer's que to the Mac. Click the dropdown next to Use and choose a driver that's not for your printer. Typically the best one to try is another Photosmart dirver, but Deskjet drivers will work as well. I would make the instructions a bit more clear, but I don't have access to a 10.6 Mac. Let me know if this works or not.
I am a printer tech for HP.

Printer only printing two pages, any application

I have a Samsung ml-4600 laser printer connected via USB to an Ibook. It worked great for years, but now, no matter which application I'm using (TextEdit, Word, Powerpoint, Safari), the printer only prints two pages. Even if I print using the printer as a shared device, it'll only print TWO pages!
I've tried:
- printing ranges instead of just selecting 'all'
- tried different applications
- switched USB ports and cable
- uninstall and reinstalled driver from Samsung
- removed and re-added printer to printer list
- removed the printpref preference files from library/prefs
- repair disk permissions
- update all OS X software
Now, I can print from a different powerbook using a direct cable connection and it'll print no problem, so the problem is limited to this 800 mhz g4 ibook.
This just started happening, any ideas?
thanks
Kevin

This thread may help:
http://discussions.apple.com/thread.jspa?threadID=2250765&tstart=0
Make sure you are using the 1.2.0.224 version of the driver. If you already are, you can try using the gutenprint driver.

HP 6510 printing only blank pages after changing print cartridges

Hi,
My HP 6510 is printing only blank pages after I installed new print ink cartridges. I tried cleaning the print heads, aligning the printer... which did result in some pages printing with a little color (but it seemed "off" to me). That said, when I try to print a regular document from my PC it only prints a blank page.
I can't seem to figure this one out on my own - please help!
Thanks!
Chloe

The document here may help resolve black not printing on your Photosmart 6510. Be sure the cartridges are vented as shown in solution two.
Is your printer still in warranty? You can check with HP's warranty tool here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

C6180 All In One Printer only prints 1 page per document after Windows 7 64 bit upgrade

Similar Messages

Maybe you are looking for