C6180 does not appear in my list of printers in Printer setup utility (mac OS X 10.4.11)

My C6180 was printing slowly so I followed the steps in the forum (unplugging, holding down the buttons, etc. ... Shut down, restart, etc.) Now it doesn't appear in my list of available printers when I try to set up again in the Printer Setup Utility. My software is updated. How to I get it in the list. I've been around in circles and I may have messed up some settings in trying to solve this. I have to print stuff for work. Freaking out a little. Help.

Hello,
Thanks for the post.  Murphy's Law, as soon as you really need to print something for work, this happens!!  I've pasted a link below that should help you resolve this one.  I hope this helps..........GOOD LUCK!
http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00653122&tmp_task=solveCategory&cc=us&dlc=en&la​...
Just in case, below is a link for the drivers should you need to download.  There is a Universal Driver that supports MAC OS 10.3/10.4 if you need a quick and dirty......
http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=11534​...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Similar Messages

  • New Downloaded/Installed Cannon PPD Print Driver does not appear in driver list

    I have downloaded and installed every new driver, 5 times, including he PPD driver for the Canon imagerunner 5570 printer, however when I add the printer the PPD driver does not appear in the list of drivers. the printer is on a wireless network and I was able to print before updating.  I had not set up Time Machine until today so I can't go back, or can I.   I am a new Mac owner so please be gentle.
    Thanks

    The PPD installer will copy files to HD > Library > Printers > PPDs > Contents > Resources > en.lproj and the file names will be "cnxxxx.pdd". Can you first check that you have all the files installed.
    If you do have the files then you can add the printer using IP > LPD for the protocol. Note that the iR5570 does not support Bonjour so it won't appear in the Default view of Add Printer as Zlig suggested. You then enter the IP address of the iR5570, leave the queue name blank, change the name to something meaningful and then search for the ir5570 in the Print Using menu.
    If there are no Canon iR models listed in the Printer List (typing iR in the Search field will determine this) then you should try resetting the printing system as follows.
    1. Open System Preferences > Print & Fax
    2. Move the mouse over the Printers list.
    3. Hold down the Control key and then click the mouse
    4. Click on the 'Reset printing system' pop-up
    5. Close Print & Fax and restart your Mac
    This will remove all the printer queues from Print & Fax but will not remove the printer drivers installed on the Mac. So you can try adding your print queue to the iR5570 again using the process above.

  • I still use Aperture 2.1.4.  I need to export an image file with a CMYK profile.  Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue.  Help?

    I still use Aperture 2.1.4.  I need to export an image file with a CMYK profile.  Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue.  Help?  Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

    leonieDF
    Thanks for your response.  My profiles are located within color sync utility as you can see here:   
    These profiles do not respond to clicking and dragging.  Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them.  Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement.  I have never needed the CMYK profile until recently, and that need has now past.  However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices).  I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space.  I don't face these restrictions with all the others, so it remains a curious circumstance for me.  I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether.  Again, many thanks for your attention to this matter.  The reach of this community is astounding.

  • I need to reset my security questions, I don't have a rescue email and I live in Lebanon (Does not appear in the list of countries for apple calls)

    Hi,
    I forgot my security questions and I don't have a rescue email setup.
    I serached the internet and the only solution I found for that is to call apple. The proble is there is no phone to call, they have to call you and there is a list of countries.
    I live in Lebanon and it does not appear in the list of countries listed for apple customer support call.
    How can I reset the security questions.
    thank you

    The Three Best Alternatives for Security Questions and Rescue Mail
        1. Use Apple's Express Lane.
              Go to https://expresslane.apple.com ; click 'See all products and services' at the
              bottom of the page. In the next page click 'More Products and Services, then
              'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
              ID security questions' and click 'Continue'.
         2.  Call Apple Support in your country: Customer Service: Contact Apple support.
         3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • ITunes Does Not Appear in the List of Default Programs?

    My wife is trying to get iTunes to be her default media player, using the instructions found at this link: http://support.apple.com/kb/HT3202.
    However, when she goes to the list of default programs, following steps 1 and 2 at that link, iTunes does not appear in the list.
    How can we correct this?
    Thanks very much in advance for any info.

    Vik-
    I was having this same problem. I understood how to change the default program but like yours my iTunes was not in the list so therefore I was unable to set it to default.
    This worked for me: (I have Vista)
    I checked for updates on my iTunes program and there was an overdue update. I installed and restarted iTunes. Then went to my Default Programs tab and followed the instructions just as described in the support material and after my installation of the newest update my iTunes was now listed in the lineup of available default programs.
    I hope this works for you as well!
    Thanks and good luck!

  • CDs loaded, Artist name does not appear in ARTISTS list

    Among all the CDs I've loaded and songs purchased, I have 2 Carly Simon
    CDs on my video iPod. However, Carly Simon's name does not appear in my
    list of ARTISTS in the Music Menu.
    I did a sync with my iTunes list and the songs are indeed loaded.
    Why is her name missing from the list and how do I get it back?
    It used to be there!
    Thanks-

    I just found the answer on the discussion board.
    In my SETTINGS I had compilations turned on.
    When I switched it off, Carly Simon was back in my
    ARTISTS list.

  • Why MSDAORA provider does not appear in the list of providers of management studio?

    I have a Windows Server 2008R2
    64-bit standard. with SQL Server
    Express with Advanced Services 2008R2
    64-bit. After performing the
    above installation and do all the updates, I installed
    Oracle 10G 32 bit client.
    open sql server management studio and looked
    at the list of providers. MSDAORA
    does not appear in the list. I can do to make the
    management studio put it in the list of
    providers.
    ps: this server must have the client
    installed Oracle 10G 32
    bit because I have several 32-bit applications
    that use this client

    Hello,
    MsDaOra is the old (bases on Ora 8.5) deprecated Microsoft driver for Oracle; you should avoid to use this driver.
    You can install the 32 bit and 64 bit Oracle OleDb driver parallel on the machine, that works. The you can use the driver version depending on the tool you work with.
    Olaf Helper
    * cogito ergo sum * errare humanum est * quote erat demonstrandum *
    Wenn ich denke, ist das ein Fehler und das beweise ich täglich
    Blog
    Xing

  • Enhancement view does not appear in my list of views

    Hi ,
    I have created an enhancement and now I used the wizard to add a new view to this application.The view created does not appear in my list of views but it appears in my Z BSP application.
    Please help!
    Regards
    Shilpi

    Check whether you are in Enhanced Version of UI Component !  (Original UI CMP name and Enhanceset : Z*)
    Thanks
    Allot points if this helps !

  • Album artwork does not appear in album list or grid

    I added album artwork (did get info then copy and paste) and it shows up fine in cover flow but does not appear in album list or grid view.
    What am I doing wrong?  Artwork files were scanned from album covers that I have.

    Your album artwork cache may be corrupt. Provided most, if not all, of your artwork is embedded you can simply delete the Album Artwork folder that you will find inside your main iTunes folder and then scroll slowly through the library in Grid/Albums mode to rebuild it. Any images that were "downloaded" rather than embedded will need to be reacquired.
    Threre are separate folders for the downloaded and cached images, but I've always gone for a complete rebuild so I don't know it would work to delete just the cached folder.
    tt2

  • CD does not appear in Source list

    Hi
    when trying to import from CD, the first CD appears in the source list but subsequent CDs don't. I've looked at the iTunes support page and seen the post about running msconfig but the file mentioned does not appear startup item list (so I cant disable it ).
    I have the latest patches for XP and the CD drive.
    Any further thoughts ?
    Thanks

    That did not work either. I get another message that says the disk image failed to mount.
    I did finally get the updates for Panther last night via software update, but it has not solved anything. Also had someone come over and see what they could figure out -- to no avail.
    Digital data CD's appear on desktop just fine. CDr's load. Just not music cd's. It's driving me crazy!

  • In Apple mail, the attachment symbol does not appear in the list of sent items

    In Apple mail, the attachment symbol does not appear in the list of sent items. So you cannot sort sent emails based on whether or not they have an attachment. Is there a way to fix this?

    I think my question wasn't clear. I know how to display the attachment header (I use classic layout) but the problem is that the paperclip icon does not appear against the messages that contain attachments. See screenshot below. The attachment column is displayed but is blank. These are my sent items and I know for a fact that most of them have attachments. Can you help?

  • App asks to have location services turned on but App does not appear in location list.

    I start the EZ Word Cheats and it starts with the menu open. I click on Quick Import and a blue box appears with the message to turn on Location services in settings. I start the settings app, click Privacy, click Location Services, but EZ Word Cheats does not appear in the list of Apps that can have Location Services turn on. Shutting the iPad off or resetting it does not help.

    I reset location services in Setting>General>Reset>Reset Location & Privacy and that fixed the problem. I need not need to restore from new. When I ran EZ Word Cheats after the resetting location services and then clicked on the Quick import under the menu, a message came up asking access to Photos instead of location services. This is the correct behavior since the program does need access to my photos but does not need Location services.

  • I have a Sony DCR -SR32 which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way to import files from this camera ?

    I have a Sony DCR-SR32 HDD video camera which does not appear in the list of compatible cameras for imovie '11. Does anyone know if there is way of importing video from this camera to imovie ?
    Thanks
    Pheona

    Greetings Pheona,
    That appears to be a hard drive based camecorder.  Usually these mount on the desktop of your computer as a little white hard drive icon.  If you go inside you should be able to find the movie files the camera is saving.  See what format they are (the last 3 letters at the end of the file name is a good place to start).
    You can drag the movie files from the camera hard drive to the computer to copy them.  Then convert them with a video file conversion program to a format iMovie can understand.
    Try converting one of the files using a video file conversion program like Video Monkey: http://videomonkey.org/downloads/
    In the "Convert to" drop down menu choose "DV" (Preferred), "Quicktime", or "MP4".  Then import the resulting file into iMovie and see if that works any better.
    If that program can't convert the files you can try another file conversion program:
    http://www.southpolesoftware.com/iVI/iVI.php
    http://shedworx.com/voltaichd
    http://www.elgato.com/elgato/na/mainmenu/products/Turbo264HD-software/product1.e n.html
    Hope that helps.

  • When I open iTunes my iPod nano does not appear in the list of divides so that I can click on what I want to since.

    When I connect my Ipod Nano to my Mac it does not appear in the list of devices, so I can't check what I want it to sinc, such as music videos. It will sinc thr music automaticlly. I can't tell it to sinc anything else.

    the same exact thing happens to me except that when i plug it in it tells me not to disconnect it. i had a friend who told me to leave it plugged in no matter how long it took.. i waited for 5 hours or more for my ipod to do something and i got so mad i just disconnected it.it didn't do ANYTHING AT ALL. so, if someday you find out how to make yours work.. can you tell me please? i'm desperate!
      Windows XP  

  • I downloaded the ebates shopping toolbar and wish to remove it but it does not appear in my list of add ons or plug ins. I have just now downloaded the newest version of Firefox.

    I downloaded the ebates shopping toolbar and wish to remove it but it does not appear in my list of add ons or plug ins. I have just now downloaded the newest version of Firefox.

    I am not able to remove the ebates tool bar because it does not appear when i go to tools then addons or extentions or plugins. Where is it?

Maybe you are looking for