C6180 Win7 driver fails to install

I have downloaded the latest full feature driver package for my C6180. When I run the downloaded file, it goes almost entirely through the installation process, recognizes the printer on the wireless network, then gives me a message that "Printer setup has failed to complete." I've tried uninstalling and reinstalling, with and without firewall and/or anti-virus -- nothing works. Any suggestions to fix this?

I have the same problem with a C6180 with a direct USB connection. The installation goes up to "configure device" and sits there for about 15 minutes before issuing a fatal installation error. I have been with HP support 6 times to no avail. They are finally esculating my issue. I'll let you know the outcome.
Message Edited by rich1039 on 11-27-2009 11:58 AM

Similar Messages

WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.

Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

USB Console (Serial) Driver fails to install on Windows 8.1 x64

The USB console cable driver v3.1 will not install on Windows 8.1 x64. Had a similar problem with Windows 7 x64 but this was fixed using Greg's (greggar25) excellent step-by-step procedure (see post: https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing).
I am using the driver from this link: http://software.cisco.com/download/release.html?mdfid=282774228&flowid=7442&softwareid=282855122&release=3.1&relind=AVAILABLE&rellifecycle=&reltype=latest
I followed the same procedures I did for Windows 7 and the install goes without a hitch. Reboot and connect the USB cable, opened Device Manager and now I have a COM Port randomly appearing and disappearing with its number incrementing well above 1,000.
A few times while it appeared for a few seconds, I was able to right click on the properties, update the driver and chose Cisco Serial and it settled down but it did not assign a COM port. Then a few seconds later, it starts the disappearing/reappearing thing again.
Anyone have luck getting this to work with Windows 8.1 x64?

Hi,
open Device Manager by simply typing the words on the Windows 8.1 Start Screen. The Search Charm opens and click Device Manager in the displayed list.
In Device Manager a new hardware category, CiscoUsbConsoleWindowsDriver, is displayed. It has two components: the Cisco Bus enumerator and the Cisco USB to Serial adapter. Expanding the Ports hardware category shows a new Cisco Serial port.
or
Look into below
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing
1) Install the usb console driver\windows 64\setup(x64)
2) Follow the wizard and accept the defaults
3) Restart the computer (the installer usually says it needs a restart)
4) After restarting the computer, plug in the usb cable
5) The computer should say installing Device driver software and fail at the Cisco Virtual Comm Port00
6) Click the Windows button, right click computer, manage
7) Under Computer Management, Click Device Management
8) Go to Ports (COM & LPT)
9) You should see the Cisco Virtual Comm Port00 with a Yellow Exclamation point on it
10) Right Click on the Cisco Virtual Comm Port00 and select Properties
11) Click the Driver Tab
12) Click Update Driver
13) Select Browse my computer for driver software
14) Select Let me pick from a list of device drivers on my computer
15) Choose the Cisco Serial Driver
16) Device Driver is installed successfully, take note of the com port it is using and enjoy.
HTH
Sandy

Hard Drive Fail after install Photoshop CS6?

Hi! I downloaded Photoshop CS6 six days ago. Three days later my hard drive failed... and now can not find the installation. The repair put my system back to a previous time when the computer worked fine. Did this erase the install???
Thanks,
CeCe1019

What is your operating system & version?
If Windows, how was the system reset - by System Restore? Or a complete restore from backup?
While a System Restore will leave the installed programs in your Program Files, all registry data and system files will have disappeared. So either way you will have to reinstall.

Xperia Z2 driver fails to install.

I have reciently upgraded to the Z2 phone, my iphone 4 was stolen. My issue is that my phone won't connect to my pc.
I have tried a pc at the phone store and it connects, so I know it's not the phone. I have pc companion on my computer as well as what I'm told is drivers for the phone in a downloaded file. I've extracte the drivers into the same file but when I search for the files via update driver computer does not find it even though I'm in the correct folder. I've searched the net for drivers via update driver, computer starts install, then tells me it fails. S1 driver fails (fast boot) D4305 fails (this is another name for the phone not sure if I got the numbers right in this post but I'm close. I've tried rebooting system, unpluging all usb devices, turning off win firewall and antivirus software. I'm not sure what's blocking the installation of the phone drivers. I'm pretty sure if I can get the driver's installed on my ccomputer, I can get pc companion to see my phone. I've got it to connect to my Null, which I assume is my phone, but when I open pc companion It's not connected, probably because of drivers. Tried connecting with phone turned off and on, turning on with up volume key pressed, debugging with developer still can't find thi issue.
Solved!
Go to Solution.

I must admit I am running out ways to get around this. The only other things I have seen block this kind of install are below:
1. Do not use a USB Hub.
2. Do you have any MP3 Player software installed for another MTP device?
3. Do you have any camera software for connecting a camera that may also operate in MTP mode?
4. The last option would be to test on another PC if possible to rule out the phone/cable as the problem.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

HP LaserJet 1536dnf MFP Printer Driver fails on install

I have tried installing this as a network printer, and as a local one. Neither install will do anything but fail.
I don't have a previous issue of HP Universal Driver either, so that can't be it.

Hi @KCinTX ,
I see that you are having issues with the install failing over the network. I will do my best to assist you with this issue.
What is the error message that you are getting?
Remove the HP Universal driver from Devices and Printers and the Print Server Properties.
How to Locate Print Server Properties for Windows 7.
On the Driver tab, highlight and remove the printer.
I have provided a document with some steps to try to see if that will resolve the issue.
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

New printer driver failed to install on Windows 7

Hello everyone,
Yesterday I purchased a wireless printer HP Envy 5530. When I installed the driver on my HP Pavilion mini windows 7(I don't know what the product name is since it is about 3 years old) , it failed. I called the HP printer hotline and spoke with someone in India. He told me there were some errors in my computer and I should pay them $149 to have them fix my computer. I am not sure this is the way that should be, or if there is any other method I can use to solve this problem? Please advise.
Thanks in advance!

Hello @greengem
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact.
Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Synaptics touchpad driver fails to install.

Hi,
I have a HP Pavillion Dv7 t6100 series. I'm fairly proficient on computers (as I am an electrical and computer engineer) but I'm having some trouble resolving this problem:
My computer came with synaptics version 15 pre-installed, and a windows 7 OS. Since then I have upgraded to windows 8.1, and synaptics version 16.2 without any issues.
I recently saw that synaptics version 17 was released, so I went ahead and uninstalled synaptics 16.2 and rebooted my computer. After that I tried to install version 17 multiple times, and I get an error that says the "Install Failed" with no other useful information.
To trouble shoot I have turned off the Windows feature that checks for driver signing (which is now turned back on), and I have tried installing previous versions of synaptics drivers (like 15.2) and they now all return an "Install Failed" error.
Nothing has worked so far. Any ideas?
Tyler

Ok I fixed it formatting Windows 7.

Audio driver fails to install on xp 64 bit

hello i have an »HP Compaq dc5850 Small Form Factor PC (ENERGY STAR)
Serial Number: [Personal Information Removed]
Product Number: AM500AW
i installed windows xp 64 bit along with service pack to and i downloaded the xp/2000 adi hd audio drivers from hp's site but when ever i try to install the audio driver i get a message from xp saying the audio driver has failed and no audio codec is installed how do i fix this as i dont think hp has 64 bit xp drivers for download can i use the vista 64 bit drivers please help me out thanks
This question was solved.
View Solution.

The Microsoft UAA driver for Windows XP 64-bit must be installed before you install the audio codec.
Here is a location for the audio codec.
Post your results here in your thread.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP Envy I7 15" Notebook PC- Latest Intel Update for HD Graphics Adapter driver fails to install

My PC tried to install the driver update today, and both attempts failed after the installation. There are no diagnostic messages, only the X on the last step to indicate a failure. The HP support assistant continues to show the driver in need of updating. Any ideas how to fix the driver update issue? Thank you in advance.
PC Identification information: Windows 8.1, Product Number C8P48AV
What tries to update: SoftPaq SP630750, Version 10.18.10.3304
This question was solved.
View Solution.

Hi Vdolcourt,
Yes, I would recommend doing that. But make sure you uninstall the driver first.Here is the download from HP.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Connection to external hard drive fails since installing AEBS 7.4.2

Since installing 7.4.2 the connection to my external hard drive connected to the AEBS fails. I have used this hard drive for backup successfully for quite some time and now since 7.4.2 this problem exists. If I shut off the hard drive and turn it back on I can sometimes make it through a complete Time Machine backup but sometimes not. The hard drive works perfect when connected directly to my MacBook. Any suggestions. Has anyone else had this issue since installing AEBS 7.4.2
Thanks,
Raine

Many people have experienced this problem. If you do a search for "7.4.2" you will find many posts. The universal solution seems to be to downgrade to 7.4.1. This is accomplished from AirPort Utility by clicking on Base Station:Upload Firmware while holding down the Option key and then selecting the previous version.

HP Laserjet 4100n network printer driver fails to install

I am trying to install the printer driver for an HP 4100n laserjet on an XP machine. I have downloaded the file "hp LaserJet 4100 Printing System (61.3 MB) from the HP web site. First issue is that upon executing the setup exe file the InstallShield stops at 99%. I have to end it via Windows Task manager. Occassionally I can get to 100% but I have no idea why only occassionally. If I boot into Safe Mode I get to 100% everytime.
Once in Safe Mode the wizard seems to operate properly, finding the printer on the network and returning the correct TCP address. I get to the end of the wizard and I get a Sever Error message and the wizard terminates.
I have two laptops and one other desktop connected to the 4100n via the network. I must be doing something wrong and could use some suggestions.
Thanks

Hi Cupcakekid,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP F380 All in one printer 64 bit driver fails to install

I have a HP F380 All in one printer. I donwloaded the driver for Windows 7 (64 bit). The installation program abbruptly dies with an error
Please advise how I should proceed now.

Hello shrijoshi,
I see that you're getting a runtime error when you are trying to install the HP Deskjet F380 on your Windows 7 (64 bit) machine. Please follow the steps listed below:
Hold down the Windows Logo key ( ) on the keyboard and the 'R' to open the run box, type %temp%
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe . If you have a non-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Click Start , and then click Run .
In the Open box, type msiexec /unreg, and then click OK .
Click Start , and then click Run .
In the Open box, type msiexec /regserver, and then click OK
Run Disk cleanup from Accessories\ System Tools
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads .html
Now we can restart the computer
I would now like you to install the software using the HP Printer Install Wizard it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer
Your HP F380 should now be successfully installed, if you run into any problems please let me know.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Hard Drive Failed, issue installing windows 7 pro

Hi all, and thanks for the help. So, I have this HP computer that crashed. Unfortunetly I wasn't correctly running backups and something happened to the hard drive. So, I wiped it clean.....
I never had a Windows 7 Pro install disk. So when I went to reinstall Windows I only had a Windows 7 home disc to get it started up. Now that it's up and running, the Windows 7 pro serial number (attached to the tower) will not work to validate Windows as I have Home edition installed under trial right now.
Is there a way to get another install disk, or is there a correct way to reinstall Windows 7 pro with the serial number that I have so that I don't have to purchase another Windows serial?
I tried using Microsoft's windows recovery tool, but because this was an OEM installed product it said to contact HP?
Thanks for the help.

Hi:
You can try this trick to turn the files on your W7 Home Premium disk to any version of W7.
http://www.mydigitallife.info/how-to-select-any-edition-or-version-sku-of-windows-7-to-install-from-...
You can also download the free ImageBurn software (another program in addition to those listed in step 1) to create and burn the ISO file you created by following the info above.
http://imgburn.com/
Otherwise you will have to order a set of W7 Pro recovery disks for your specific model PC from HP.

Officejet H 470 windows 8.1 driver fails to install

I downloaded the full feature software driver for windows 8.1 for my officejet H 470.
When I run the downloaded exe file the software "cannot find the file" and closes out. it doesn't ask for a CD. It is looking in a temporary file on my harddrive. If I close the message the software closes down and the driver doesn' install. if I ignore the box nothing happens -- the software continues to look for the missing file for ever....
What is the solution?

Cheetah12: thank you for your interest in my problem.
I went back to the supermario advice. If isn't for the same printer nor the same missing file. My missing file is:
File Name: C:\Windows\system3hpzprl40.exe -inf-mPreload_Drivers\Msiexec.exe
However, I did try some of the advice. I ran the L3uninstall.bat [twice]. I definitely do not have any of the old printer files on my new laptop.
I tried to reinstall the updated driver from the HP website and it still will not install.
I have also run the disk cleanup in "administrative tools" [Supermario wrote in "System tools"]
Nothing has worked. I have rebooted my laptop as required and tried installing the driver from HP and I still get the same issue . I have a screen shot of the box if it is of interest to you.

C6180 Win7 driver fails to install

Similar Messages

Maybe you are looking for