C6280 won't print on 80C stock

Is there a special setting to allow the printer to print 80 cover stock? The paper feeds in, but comes out without stopping to print.

Hi jood,
When the printer is set to current settings and receives a request to print media that is not currently installed and configured in the printer, it will prompt for you to load the media that it is being requested to print on.
Based on the description, it sounds like the printer has not been told the type of media that is loaded in the tray. When it the driver you select Labels, the printer itself thinks it has Plain loaded and requests that you load the labels.
The following is a section from the User Guide. On Page 57 there are instructions for changing the default paper type setting. If this setting is changed to "Labels" and request "Labels" from the driver, you should not get the prompt on the control panel again.
Please give this a try and see if the prompt goes away.
Kazman
I am an HP Employee
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

Photosmart C6280 won't print after trying to clear library/startupitems error

I have had a Library/Startupitems error ever since updating my HP software a couple of years ago. In trying to finally resolve this issue myself, the HP website suggested removing and reinstalling the software. There is no active link within the HP support pages for a download. I found a C6200 series driver online, which I've installed, but now I cannot print anything but a test page, and I still have the Library/Startupitems error. As it is, I cannot even find that file at all to fix the error.
This question was solved.
View Solution.

Hi @Eric_V67
Since the C6280 doesn't have full feature software and drivers, I can't image the error is stemming from the printer. I can however, provide you with instructions to remove ALL HP software including the HP driver that was provided from the apple software update.
If I understand one of your previous messages, it looks like perhaps you had this printer installed previously and then upgraded the Mac OS. If this is the case, then old software that was previously compatible could be the root cause.
Once the HP software and drivers are removed, you can restart the computer and see if the error persists. The final step would then to be reinstall the Apple software update.
Follow the instructions below. I apologize in advanced this is not a fun task! I will try to make it easy to follow. Some of the files described in the following steps may not be found, if you can't find one of the files or folders on your computer, don't be alarmed.
Move the files and/or folders to the trash, drag and drop
Macintosh HD/Applications//Hewlett-Packard folder
Macintosh HD/Library/Application Support/ - delete all files and folders regarding HP/Hewlett Packard
In Macintosh HD/Library/Caches - delete all files and folders regarding HP/Hewlett Packard
Macintosh HD/Library/Documentation/Help/ - delete all files and folders regarding HP/Hewlett Packard
Macintosh HD/Library/Frameworks/HPServicesInterface.framework
Macintosh HD/Library/Frameworks/HPSmartX.framework
Macintosh HD/Library/Image Capture/TWAIN Data Sources/HP Scan Pro
In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders regarding HP/Hewlett Packard
In Macintosh HD/Library/Preferences - delete all files and folders regarding HP/Hewlett Packard
Move Macintosh HD/Library/Preferences/loginwindow.plist to the desktop. NOTE: Not removing the file loginwindow.plist during the manual uninstall could cause the uninstall to be unsuccessful.
In Macintosh HD/Library/Printer/hp - delete folder
In Macintosh HD/Library/StartupItems, drag the following folders to the trash, HP IO and HP Trap Monitor
In Macintosh HD/Users/USERNAME (this should have a symbol of a house next to it)/Library/Preferences, drag the following folders to the trash: *Any files beginning with com.apple.print, *Any files beginning with com.hp, *Any files beginning with Hewlett-Packard, *Any files beginning with HP or hp
In MacintoshHD/Users/USERNAME/Library/Printers, drag any All-in-One printers listed here into the trash.
Drag the HP icons from the Dock and drop it on an empty space on the desktop. The icon will disappear.
Close all open windows.
Restart the computer. - The startup error may be gone now.
Empty the Trash.
If the error is indeed gone, download and install the HP Printer Drivers for OS X and you should now be able to print and the start up error should cease to exist. If the error is still present, proceed to the next set of steps.
Remove the print driver and other software from a computer.
From the computer desktop, double-click the Macintosh HD  icon.
Double-click the Library folder.
Double-click the Printers folder.
Right-click the HP folder, and then select Move to Trash.
When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.
Double-click the PPDs  folder.
Double-click the Contents  folder.
Double-click the Resources  folder.
Locate your printer in the printer list, and then right-click on your printer and select Move to Trash.
When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.
Click the Trash icon on the taskbar, click the Empty  button, and then click OK to empty the trash.
NOTEBy clicking OK, all items in your trash will be permanently deleted from your computer. To delete one item in the trash, click that item to highlight it, and then click OK.
On the upper-left corner of the computer desktop, click the Apple menu icon, and then click System Preferences on the drop-down menu.
Double-click Print & Scan.
In the Printers list, click your HP printer, and then click the Minus button to delete it.
Restart the computer and now you have a fresh start. - The start up error should be gone now (If the error is gone now, there is no need to proceed to the repair Disk Permissions step, instead simply download the HP Printer Drivers for OS X.
After logging in, Repair Disk Permissions
On the Dock, click  Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer .
Restart the computer - At this point you should no longer see the startup error
Download and install the HP Printer Drivers for OS X, once the install is successful we can then delete the loginwindow.plist from the desktop.
If by chance you still see the error please post a screenshot of it so I can continue to work with you towards a complete solution!!
How to take a screenshot on a Mac.     How to post a picture on the HP Forums.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printer won't print too- need a new printer head. i want to know if you have one in stock

Hi, my printer won't print and the error message states "bad printerhead". My printer model is HP officejet d 155xi. I need to know how much it costs or would it be cheaper to buy a new printer. Still have four cartridges of ink. Please advise. Thanks.

HI,
You can find the General prices for the printheads HERE, if you only have to replace one its ok, but keep in mind that the other printhead are likely to be just as old and might break down as wel.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Just bought deskjet 1055 won't print card stock

I'm really upset most of my printing is greeting cards and this printer won't print them. what can I do?

Return the 1055 and get a printer that has a custom paper size option.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HP Officejet 7500A Wide Format - Can't reset the paper size - won't print!!!

I have a new HP Officejet 7500A Wide Format All-in-one printer. I love it and have had no problems with it...until now. The other day I went into Photoshop and printed a 4x6 photo and now my printer will not allow me to print on 8.5X11. I have checked the paper size in Photoshop, Word, Excel, Acrobat...everything I used that day, but it all shows "letter" size paper in the properties. I also checked the printer utilities...letter size paper is selected.
But when I try to print, the printer and the computer both give me a "paper mismatch" error and my only option is to change the paper or cancel. I went back into photoshop again and was able to print a 4x6 photo again - once I put in 4x6 paper - but then I changed it back to an 8.5X11 size photo sheet and tried to print on letter size paper and..."paper mismatch'.
I changed the printer back to factory settings. Nothing. I just had to reset up my printer on my network, but it still won't print. I tried to re-install the printer software from the installation disk, but it won't install. It says "already installed".
HELP!!!!!! I honestly don't know what to do at this point!!!!!
Thanks in advance!!

I have struggled with a similer problem with my new 7500A. I've done all the things you did. I made sure I had all updates and the firm ware update. I spent time on the phone with a lady who meant well but clearly didn't know the product. I had a difficult time communicating with her. Her accent was in the way. This morning I realy didn't want to face another day of this struggle. As I walked into my studio I had a idea. Instead of going to the computer to try to solve my problem through menues, HP Customer Service and or communities. I went dirrectly to the printer. I turned the printer on, the little screen on the printer lit up I touched the arrow to go to the next screen of menus. I touched "Set Up" then scrolled down through the choices. I picked "Preferences". At the bottom of the list was.............. Media Width/Type Sensing (ON)............I promptly turned it (OFF) ......................I am printing as I was told I would be able to do prior to buying. I am not getting that anoying screen "Paper Mismatch" . The printer is printing now on my 12 x 12 stock regardless of the type. ie: cardstock, plain paper, colored paper, construction paper. I hope this helps some of you out there. Clearly HP was of "NO" help to me. I have read that others are installing HP 7000 drivers etc. I've solved the problem without going to those lengths, no thanks to HP.

I have an hp photosmart c7280 all-in-one series printer won't print. error message, system problem

I have an HP Photosmart All-in-One C7280 series printer/fax/copier/scanner. I have been having issues with printing for the past few weeks. It is a wireless printer, with a jack into the wall (for fax) and it is plugged into a power source. I never used to have issues with it before, but recently, it won't print when I send a document to it to print. It will print its configuration pages, reports, etc if I select them from the Printer's menu but not when I send a doc to it to print. First it was saying it was offline, but I figured out how to override that by operating as an administrator and selecting "Use Printer Online" from the dropdown menu when I right clicked on the printer from the control panel. But now it says "Error: Printer failed to print document. System error".
Noooo clue what to do now. This is the only color printer we have so we kind of need it to work. We bought this printer off the shelf at a office store (before I started working here) and so we don't have any designated technichians to work on it. I asked the guy who services our Image Runner Copier to look at it but he had no clue what was wrong with it. Hopefully someone can help?

goestherain,
I need to know what operating system you are using to helps narrow troubleshooting a bit, what OS are you running?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Hp deskjet 1510 series won't print

We mloved recently to la Gomera (Canarian isle) and there I bought a hp deskjet 1510. It won't print when connected to my lap top, also HP with Windows vista, although it is connected, is on, and is the default printer. I tried everything the print and scan doctor suggested (like switch off fire wall, chekc print ooler, remove and reinstall driver and software etc) and everything else I found in support from HP. it still does not print. When connected to our other lap top, also HP but with windows 7, it works fine. The only thing I managed to print is a diagnostic page but it give only numbers and letters like SN = CN39a19mmp05yr 21 PG =81 12 PER = -5yr 22 FB = 0/0 etc. Tjat does nog help me :-(. does anybody know how to solve this?
This question was solved.
View Solution.

Hello,
Please try the below mentioned steps..
Click START > Device and Printer > Add a Printer > Add a local printer >
( if the printer is connected with USB )
Select "Use Existing Port " then Virtual USB from drop down , Click NEXT, in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 6980 and complete the wizard
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Deskjet 3050 Won't Print Wirelessly

Hi there,
My new all in one 3050 won't print for me. It is "Offline" in the network page. I feel I have explored every avenue and it will still not print. The wireless network configuration page I printed says everything passed. The home network disagnostic tool says "software missing" after i click test connection. The print diagnostic tool fails on connectivity everytime. I can connect to the printer ip 192.168.1.3 in the browser 95% of the time but not always. My router is a Zyxel P-660HW-T1 v3. I'm really close to tears with frustration, I'm quite computer and networking savvy but I cannot fix this. please help, I'd be eternally grateful.
Kind Regards,
Larry.

Hello dkkenny1,
Are you running Windows on your computer? If so, I recommend running the HP Print and Scan Doctor. This tool provides a quick and easy way to diagnose and resolve many printing, scanning, and connectivity problems. Click the link below for details on how to download and run this tool:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03286146&lc=en&cc=us&dlc=en&product=4066452
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP Officejet Pro 8100 Everything fine; Just won't print

HP Officejet Pro 8100 working on a Windows 8 PC
I like this printer, had it for a few months, worked fine at the start. For more than a week now, it just won't print. Troubleshooting reveals no problems with set-up or anyhing. No error messages. Files go to the printer, listed on the queu, but nothing happens thereafter. Help!

This solution was created to address the issue you've described.
Print jobs stuck in queue / No response
I am an HP employee.

Remote laptop won't print to new HP4622 wireless printer

My new HP 4622 won't print from wife's laptop (Compaq Presario CQ-60-224NR w/ Windows Vista) in another part of the house on my home Centurylink DSL network with very good connectivity. I have the printer installed at my desktop (Gateway Microsoft XP SP3) and it prints fine from the desktop. Does the printer software also need to be installed on the laptop? I sent a .jpg file to the printer from the laptop and it printed one line of unicode? code per page until I cancelled the job from the print queue. I have gone thru the installation guide a couple of times and nothing is fixed. Test results say that everything passed and install is successful. I downloaded and tried the print doctor wizard and it says no problems found. I have McAfee total protection running, could there be a firewall problem? I'm not sure about enabling ports or that sort of thing. I dumped a perfectly good Lexmark X7170 all-in-one because it wasn't wireless and we couldn't get it configured to print peer-to-peer. Now I have a new wireless printer and con't get to print remotely either. Hope you can help. Let me know if you need more info. Thanks.
This question was solved.
View Solution.

Hi Ken,
I would recommend giving the printer a static IP address for the wireless connection (not USB):
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you will have delete and re-add the printer on your computer. Do it this way:
0. Go to Start > Control Panel > Devices & Printers and delete all instances of the printer.
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
If you're still experiencing issues try changing the channel on your router to 11 and the encyption to WPA.
Say "Thanks" by clicking the blue Kudos star in the post that helped you.

Report won't print to the end of width in Oracle E-Business Suite

Hello all,
I desperately need help to setup Reports 6i layout. I created a report for a 8.3 x 11.69" and it seems fine when I print directly from Reports Developer but when I register it in Oracle E-Business Suite 11.5.10.2 it won't print to the end of page width. It always cut the print in about 3/4 of page width. I already setup the report as a text and pdf but still no success. Enlarge the width and height of the report won't help either. Anyone can suggest something to help? Thanks.

Hi Clamarion,
Login as those users and check the preferences, or you can check the value from the backend (through FND_USER_PREFERENCES table).
About "Applications Start Page" profile option (Doc ID 729375.1)
https://forums.oracle.com/thread/940401
Thanks,
Hussein

Won't Print to Kodak 1400 Professional - "Printing" never ends

Hi - Using MacBook Pro 17" and Aperture. OS 10.4.x. Out of box, new Kodak 1400 Professional Printer worked fine, and printed several great pictures. A week later, I was unable to print anything at all. Printer Window shows "PRINTING" and the twirling barber pole thermometer, but it NEVER prints however long I wait and no error message.
I've opened and closed printer, restarted printer and computer, checked that the firmware is up to date, re-set the paper in tray, etc. ALSO, it won't print JPGS from Preview, or apparently anything.
What could have happened?
Fix?
David Ferleger
email [email protected]

I have no idea if this will help anyone, but it helped me. I had my Kodak 1400 working with no problems for quite a while. I never really printed much, but I did now and then. About two months ago, I ran out of paper and didn't purchase any more for a while. I finally got my two packs (so I could get the third free!) about two weeks ago. I now have two clients who need prints, a total of about 85 8x10s.
So, I setup the printer, installed the driver, and started going about my business. Setup the prints, got it all rolling, and prepared to run the first print through as I've found the first print on a new ribbon is a dud due to dust. Nothing happened. It went to "printing" and stared at me as though it were as dumbfounded I asked it to print as I was that it WASN'T printing.
That was yesterday. Since then, I've removed the driver about a bajillion times. Googled this, FAQ'd that, held my tongue appropriately, used different USB cables, different USB ports, removed the other printer, blahdy blahdy blah. Then, this afternoon while I was somewhere between awake and sleep, it hit me: why not try an older driver. I thought about it, and realized that since the last time I was using the 1400 successfully, I'd reinstalled OSX. What were the odds that when I downloaded the driver the last time, I downloaded the "wrong" driver and got the old one (1.0.2) instead of the NEW correct driver, 2.0.0.
So, I removed the old driver from everywhere I could. Restarted the computer. Installed 1.0.2, cliked print, and felt my heart sink as the red Error light blinked intermittently with the "Media" light. Shot through the heart... then, all of a sudden, it sucked in some paper, and started printing! Problem solved!
So, if you still can't print, try using 1.0.2. It might not work, but if you can't print with 2.0.0, what harm can it do? NONE! Muhahahaha. I feel so adventurous for using an old driver. (yes, this is what now counts as "adventure" for me... now go away or I shall taunt you a second time.)
Hope that works for someone!
--Mike
MBP 2.0ghz Mac OS X (10.4.7)

Won't print to photo tray, but will print test page

I have most current Vista driver, but can't print to photo tray. It won't pull the tray in, although it works great when printing test page. I tried various page/paper settings and "photo tray" light settings, but still won't print from Vista.
Tried 8250 printer properties, changing paper settings, but can't recognize settings, even though it sees the paper and prints the test page. Seemed to work just fine with XP.
This question was solved.
View Solution.

Plugged into an XP machine, photo printed.
Plugged back into Vista, fooled with the settings, then it worked!
I don't know what exactly fixed it...

IPad won't print to hp with AirPrint, was working fine earlier!

My hp printer worth AirPrint isn't printing from my iPad and iPhone. Has been working fine until tonight.
I have rebooted the router, printers, ipad2 and the iPhone. Still won't print.

Try restarting your wireless router by removing power to it for 30 seconds and restarting.
On your iPad go to Settings > General > Reset > Reset network settings.
Now try to connect.

Macbook won't print to lexmark z600 anymore

i cancelled a job the other day as a noticed a mistake. ever since then, my MB won't print. in the printer display it says job stopped. i clicked start, but nothing happens. when i connect to my printer at home i have no problem. whats going on?

nope ive tried restarting, reinstalling drivers, ive even deleted and re-added printers. still nothing. the macbook sees the printer, it even processes the job. but there is some kind of jam up in th printing queue. i delete all items in the queue, try again. still nothing.

C6280 won't print on 80C stock

Similar Messages

Maybe you are looking for