C6380 doesn't find network *solved*

I successfully setup our new Photosmart C6380 on my wireless network several days ago, but today the printer no longer will find any wireless network. I went back and reset the printer to default settings and ran through the Wireless Setup Wizard, but it cannot find my network. 3 out of 4 of my computers are connected to the network. The printer is sitting next to the computer that can't connect... maybe it caught whatever problem that computer had. 
I tried entering in our SSID manually in case someone had set it to not broadcast, but it still did not find it.
Any help would be GREATLY appreciated!!!!
SOLUTION FOUND - I turned the printer off & then on again........... (thought I'd share that excellent troubleshooting step)

Hi friscojatt,
According to your system profile, you are running OS
X 10.2.X. You cannot setup an Express with anything
less than Panther (10.3). This is from the Airport
Express Setup Guide:
What You Need to Get Started
To set up AirPort Express using a Macintosh, you must
have the following:
A Macintosh computer with an AirPort or AirPort
Extreme Card installed
Mac OS X v10.3 or later
iTunes 4.7 (included on the AirPort Express CD) or
later
The iTunes is needed if you want to stream music to a
stereo system but is not needed for internet
connection. It would be a good idea for you to
search further in the discussions or start a new
post. Good luck
17 in.
iMac G5 ALS (1.8 GHz) Mac OS X (10.4.6)
iMac G3 DV (400 MHz), Airport Express, 3rd gen
iPod
I Have Linksys rounter but it use to connect just fine and all of sounden is stop but m other computer can connect just fine
ibook G3   Mac OS X (10.2.x)  

Similar Messages

  • Doesn't find network anymore

    Why doesn't my iBook find my airless network anymore? I've set it up last night and everything was ok; then, when I put my computer to sleep, I selected "turn airport off". Today, I woke my computer up, selected "turn airport on" and tried to select my network. Instead, it only recognises another network, which is probably around my home.
    Airport base station with green light on.
    Any clues?
    Cheers,
    Paulo

    Hi friscojatt,
    According to your system profile, you are running OS
    X 10.2.X. You cannot setup an Express with anything
    less than Panther (10.3). This is from the Airport
    Express Setup Guide:
    What You Need to Get Started
    To set up AirPort Express using a Macintosh, you must
    have the following:
    A Macintosh computer with an AirPort or AirPort
    Extreme Card installed
    Mac OS X v10.3 or later
    iTunes 4.7 (included on the AirPort Express CD) or
    later
    The iTunes is needed if you want to stream music to a
    stereo system but is not needed for internet
    connection. It would be a good idea for you to
    search further in the discussions or start a new
    post. Good luck
    17 in.
    iMac G5 ALS (1.8 GHz) Mac OS X (10.4.6)
    iMac G3 DV (400 MHz), Airport Express, 3rd gen
    iPod
    I Have Linksys rounter but it use to connect just fine and all of sounden is stop but m other computer can connect just fine
    ibook G3   Mac OS X (10.2.x)  

  • WD TV Live, sometimes doesn't find network shares

    Hello everyone, I have WD TV Live and WD external and network harddrive. My problem is that sometimes, randomly,player does not find the WD external drive. The only thing which helps is turn off and turn on the playerby unplugging and plugin the power adapter. Harddrive is allright, because at the same time is availablefrom other devices such as tablet or notebook. Has anyone simililar problem? Tanks for helpHawkeye

    I don't have a solution, but I have a workaround.  I had the same issue - intermittent connectivity, slow.  There's absolutely nothing wrong with my network, it's all hard-wired, all the computers (win 7 / Win 8) can browse to each other, play media, etc.  The proper computer was filing the role of Master Browser. For approximately a year, I used a Synology NAS acting as a DLNA "media server".  It worked perfect, never an issue.  I took down the NAS and built a dedicated Windows (7) media center, or HTPC.  That's when the trouble started with my WD unit. To solve it, I stopped using network sharing to get to the media from the WD device and instead downloaded Universal Media Server (installed on the dedicated HTPC), which is free and acts as a media server, the same way the orginal Synology NAS did.  Problem solved, easy setup!  My WD unit is back to being fast, always finds the media server etc. I'm convinced there's something wrong with the unit or the firmware (for some) and WD isn't interested in solving it.

  • Airport doesn't find network anymore

    Hello,
    since 2 days ago i have a problem finding my wireless network.
    The first thing i did was to reset the airport base, which worked. my powerbook found the network again. Then another weird thing happened when i tried to set the password back. I told me that my computer wasn't WPA-capable. But I used a WPA password all the time before and never had an issue.
    so i set it to a WEP 128bit password and it worked. but now since 10mins it won't recognize the network AGAIN. I reset the base again but still the network doesn't appear but other networks do. just not mine
    my roommate's laptop (Windows XP) recognizes the network btw
    is it possible that i caught a virus?
    thanks for any help
    thomas

    is it possible that i caught a virus?
    Not likely at all.
    One thing that can work, try this, please ignore the exact symptoms and connection and Hardware types, it's worked for many others than the stated...
    http://docs.info.apple.com/article.html?artnum=304482
    It's worked for WEP, WPA/WPA2, G3s, G4s, G5s, Desktop, and laptops.
    The Interface that connects to the Internet, needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON.
    Does rebooting the Mac only fix it temporarily?
    Was the Mac going to Sleep before the disconnection?
    Next time it happens try one or both of these lines in Terminal...
    sudo ipconfig set en1 BOOTP;sudo ipconfig set en1 DHCP
    sudo ifconfig en1 down;sudo ifconfig en1 up

  • OSD: TS deployed to Vista SCCM 2012 client, reboots then doesn't find network drivers

    Hi,
    We deploy SCCM 2012 client to a SCCM 2007 Vista pc.
    We then deploy a task sequence to install Windows 7.
    Everything works fine on a vm, it reboots in winpe then starts the task sequence. On a laptop however, it does not work. F8 shows it does not get an ip address, it seems as if no network adaptor is recognized.
    However, the same task sequence works fine on the same laptop when pxe booting + I added the driver to winpe. Didn’t help. Please advise.
    J.
    Jan Hoedt

    I think I know what the root cause is, but not how to solve it.
    In diskpart, I can see 3 volumes:
    *Volume 0 = D-drive, DVD-rom,
    *Volume 1 = no drive letter, partition of 400 GB
    *Volume 2 = C-drive, label "Configuratio", type "removable" 4 GB
    It should install to the 400 GB drive but it seems that its installing to the removable drive.
    Not sure what that is since there is no USB attached. Probably it is the winpe temporarely mounted(?)
    The behaviour I have is described
    here and is also referring to USB.
    => I guess I have to tell the temporarely mounted drive to be f.e. Z when installing in full OS.
    Any idea howto do this?
    J.
    Jan Hoedt

  • Airport doesn't find network after startup when wireless router is hidden

    If I have the Wireless Network setting on my router set to "Hide Wireless Network" my Mac can't find the network after I have restarted it.
    If I leave the "hide wireless network" box unticked everything works fine, but I would prefer to have it hidden.
    Two windows-based laptops also use this router and they work fine with the wireless network hidden.
    The router is a D-link DSL-2740B.
    Has anyone else had this problem?

    I also confirm the same problem. I do not have any bridges etc on my network. Direct connect from Comcast cable modem to Airport router. The only way to set it correctly so far is to allow the network name to be visible. Whats strange is that I have this same router type at my other place and the other one is working just fine. Perhaps there is some slight hw change recently?

  • Lion doesn't show network disk in finder!

    Hi guys, sometimes (mostly) Mac os X Lion doesn't show network disk (drive) in finder!!
    System is:
    MAC OS X LION 10.7.2
    imac 27 inch  i5
    8 GB Memory
    Thanks in advance.

    Hi Carolyn... Thanks for the tip but I forgot to say that I'm expert user
    I mean... I checked already and I and problem continue.
    I solved the problem in this way.
    Finder > Go > Connect Server > Network disk
    But normally I have to see my disk under devices are in the finder.

  • Using my Actiontec modem's wifi, it doesn't find my new airport express.  When I use the new airport express network I created error message says ip address is wrong.  Help setting this new airport express up

    Using my Actiontec modem's wifi, it doesn't find my new airport express.  Using the new airport express network I just set up it says the ip address is invalid.  What can I do to overcome this blinking amber light and error messages?

    You need to begin by configuring the AEX to Join an existing network (Bridge Mode.) You can then connect to it using Wi-Fi, but the AEX will not extend your existing network.
    If you can connect the AEX to your existing router using Ethernet, then you could use it to Create a new network. Otherwise, if you want to extend your existing network you will need to get a Wireless Access Point - WAP - from a non-Apple product like D-Link.

  • IPhone 4 doesn't find Wi-Fi networks

    When I search for available Wi-Fi networks, my iPhone 4 (on iOS 7.1.2) fails to find networks that my iPad Mini finds immediately.  e.g. in the office today, the iPad finds 7 networks whilst the iPhone finds none.  Both devices appear to have the same settings.
    If I switch off the phone and switch it on again, it will occasionally find networks that I have connected to before (home, friends, etc) but that isn't reliable enough.
    I have previously tried resetting Network Settings but that didn't help.  
    I work away from home during the week, so this leaves me relying heavily on 3G data. I have often have app store updates that are weeks old and downloading music or books is a pipedream.

    This is what finally worked for me: launch Airport Utility, select your base station and check to see if the Radio Mode is set to 802.11n (only). If so, try changing it to 802.11n (802.11b/g compatible), and see if your iPhone detects your network after the base station restarts.

  • My ipad doesn't find my printer....

    How do I make my hp 3510 discoverable to my ipad? The wireless printing works from my laptop which has the same wifi settings, but the ipad cannot find the printer????

    Hi Kiwisteve77,
    I understand the Ipad doesn't find the printer.
    Thank you for your reply.
    I will be happy to help you with this.
    Try turning the wi-fi off and on again on the Ipad.
    If that doesn't work turn the Ipad off and on again.
    Check to make sure it is connected to the proper network.
    Power cycle the router, Ipad and the printer and try it again if you are still having issues.
    I have provided a document for How to Use Apple's AirPrint Over a Wireless Network. Go to the section What if a 'No AirPrint Printers Found' message displays on my Apple device?
    Hope this helps.
    Thank you for posting on the HP Forums. Have a great day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Display ethernet doesn't find IP, but does work with manual IP

    My MacBook Pro is connected to my thunderbolt display. Recently the display ethernet stopped working. When I set the setting on 'Using DHCP' it doesn't find an IP address. I can select 'Using DHCP with manual address' and choose a random IP address and it works fine. The wifi also works fine (so that does find an IP address using DHCP...).
    Any ideas how to solve this? Is it a mac or a router problem?
    Thanks in advance,
    Rugen Heidbuchel

    If you remove display ethernet in the Network menu then add it back in does it find the IP address?

  • MacBook doesn't find Wifi and mouse behaves weird...

    When the new iOS came out I received an update message also for my MacBook Pro. Since I installed the update the system doesn't find any Wifi connection any more! Even not when I try to choose a connection in the system settings: There is no single connection listed in the network list and the Wifi-sign keeps blank without any signal sign.
    Since the same time also my mouse refused to work properly: Scrolling is now impossible and when the Magic-Mouse is switched on, the active window starts to move up and down.
    Don't know exactly if this strange behavior came from the iOS (iTunes, whatever) update or from another one: At the same time I downloaded also a Firefox and a Skype Update.
    Does anyone observe similar problems since the last iOS update release?

    I'm having the same problems recently. Bought my white MacBook in Jan. '09, worked great for several months; now it won't stay on the Internet for more than five minutes at a time unless I'm right next to the router. The Airport icon, when selected, shows my network but for some reason it has been deselected. My husband's Dell has no problem at all, even if he's out on the back porch, so it's not a signal issue.
    I've updated the software to the latest Airport but that seems to have made it worse. I've tried nearly all the things Solvi did to no avail. Has there been an answer yet from Apple on this?
    (Had to re-select network to sent this short post!!)

  • HP Deskjet 3050a cannot find network printer

    I need to find out what my IP address is for my printer.  I may have changed it accidently when I was trying to set up my printer to a new router.  I have reset the default settings.  I have tried to go to HP file where it says I can change my IP address and I get the error "cannot find network printer".  I have done all of the obvious deinstall, reinstall, added MAC address to router. Nothing will recognize my printer.  Please help.  Thank you

    Hello again,
    OK, thanks for the updated information.  Try these steps...
    Changing wireless settings
    If you decide to change the wireless network settings for your wireless home network, you will need to configure your wireless printer with the new settings.
    To configure the new wireless settings on a printer that features a Wireless Setup Wizard:
    From the printer’s control panel, open the Wireless Settings menu. Many products provide access to the Wireless Settings by pressing the Wireless Button or touching the Wireless icon on the printer’s control panel. Consult the printer’s help documentation if you do not know how to access the Wireless Settings menu.
    From the Wireless Settings menu select Wireless Setup Wizard. The Wireless Setup Wizard will guide you through the process of configuring your printer with the new wireless settings. Input your Wireless Network Name and Wireless Password when prompted.
    You can print a Wireless Network Test report from the Wireless settings menu to confirm the printer was successfully connected to your network.
    To configure your wireless settings on a printer that does not feature a Wireless Setup Wizard:
    First, make sure your computer is connected to your network. You will also need a USB cable, which is temporarily used during the configuration. Be sure NOT to connect the USB cable between the computer and printer until instructed to do so by the software.
    If your HP printer software is already installed on your computer Windows XP, Windows Vista or Windows 7:
    Use Start -> Programs -> HP -> <your printer model> -> Printer Setup & Software. Windows 8:
    Launch the Printer Software from the Start screen (icon for the printer model name) or from the tile named for your printer.
    Select (click or touch) Utilities on the top of the Printer Software screen
    Select Printer Setup & Software
    Also,
    Link below for some useful information on getting your printer back on the network........Good Luck!
    http://www.hp.com/global/us/en/wireless/reconfiguring-system-help3.html
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • ITunes Diagnostic Doesn't Find Audio CD or iPhone/iPad - Help!

    I
    I’m having issues with iTune to recognize my iPhone and iPad.  My iPod nano (G5) is recognized.  I’ve run diagnostics with two failures (No Audio CD Found, and No iPod, iPhone, iPad connected).  A month ago everything was working.  What happened?  I’ve spend many hours following the instructions that’s on the web without success.  BTW – the music list that’s on my ‘test’ CD is displayed in iTunes and can be played.  It’s very strange that the diagnostic shows a CD/DVD issue.  I don’t have a virtual drive.  'Importing the CD' works cleanly - no problems.
    I am at a loss.  Any suggestions, phones numbers?
    Thanks, Pat
    Below is the diagnostic report
    Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
    HP-Pavilion RP826AV-ABA a1750e
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 0014B5E0092A3C90
    Current user is not an administrator.
    The current local date and time is 2011-07-17 16:22:10.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA , NVIDIA GeForce 7500 LE
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 72dfc61552d02f347bc3653b3c001aea
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:      {3D6285FF-7CD0-4784-99E2-8F34C6839F81}
    Description:          NVIDIA nForce 10/100/1000 Mbps Ethernet
    IP Address:           192.168.0.105
    Subnet Mask:        255.255.255.0
    Default Gateway:  192.168.0.1
    DHCP Enabled:    Yes
    DHCP Server:       192.168.0.1
    Lease Obtained:   Sun Jul 17 15:28:25 2011
    Lease Expires:     Sun Jul 24 15:28:25 2011
    DNS Servers:       192.168.0.1
    Active Connection:               LAN Connection
    Connected:           Yes
    Online:                  Yes
    Using Modem:      No
    Using LAN:           Yes
    Using Proxy:         No
    SSL 3.0 Support:   Enabled
    TLS 1.0 Support:   Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-07-17 16:18:57.
    **** CD/DVD Drive Tests ****
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    Failed while scanning for CD / DVD drives, error 2510.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    E: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
    **** Device Connectivity Tests ****
    iPodService 10.3.1.55 is currently running.
    iTunesHelper 10.3.1.55 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller.  Device is working properly.
    Standard Enhanced PCI to USB Host Controller.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    AGERE OHCI Compliant IEEE 1394 Host Controller.  Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPod nano (5th Generation) running firmware version 1.0.2
    Serial Number:     YM015EPQ71V
    iPhone 4 running firmware version 4.3.3
    Serial Number:     61120JJWA4S
    iPad running firmware version 4.3.3
    Serial Number:     DLXFPEWMDFHW
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    After trials and tribulation I found the fix to the iPhone issue.   I removed the USB connect to my external drive (buffalo backup).  After booting up, iTunes recognized my iPhone and iPad.  Major issue resolved.  iTunes diagnostic still doesn't find the Audio CD/DVD, but seems to function correctly.  I will following other discussion topic "Error 2510 regarding CD/DVD drives"
    - Pat

  • Pkg-config doesn't find libmfx

    Hi,
    I'm trying to build ffmpeg with h264_qsv (QuickSync) support. In order to do that, I need libmfx. But pkg-config doesn't find the libmfx files, although they are present:
    PKG_CONFIG_PATH is filled with the correct path:
    [root@nuc FFmpeg]# echo $PKG_CONFIG_PATH
    /usr/lib/pkgconfig/
    The libmfx files are there:
    [root@nuc FFmpeg]# ls -l /usr/lib/pkgconfig/libmfx.*
    -rw-r--r-- 1 root root 120284 Jun 20 19:25 /usr/lib/pkgconfig/libmfx.a
    -rwxr-xr-x 1 root root 893 Jun 20 19:25 /usr/lib/pkgconfig/libmfx.la
    -rw-r--r-- 1 root root 339 Jun 20 20:05 /usr/lib/pkgconfig/libmfx.pc
    The libmfx.pc contents seems ok?
    [root@nuc FFmpeg]# cat /usr/lib/pkgconfig/libmfx.pc
    prefix=/usr/local
    exec_prefix=${prefix}
    libdir=${prefix}/lib
    includedir=${prefix}/include
    Name: libmfx
    Description: Intel Media SDK Dispatched static library
    Version: 2013
    Requires:
    Requires.private:
    Conflicts:
    Libs: -L${libdir} -lsupc++ ${libdir}/libmfx.a
    Libs.private:
    Cflags: -I${includedir} -I/media/downloads/opensource/SDK/include/
    The header files are at the included in the SDK dir:
    [root@nuc FFmpeg]# ls -l /media/downloads/opensource/SDK/include/
    total 168
    -rw-r--r-- 1 zao zao 4835 Jun 3 09:58 mfxastructures.h
    -rw-r--r-- 1 zao zao 5479 Jun 3 09:58 mfxaudio++.h
    -rw-r--r-- 1 zao zao 3493 Jun 3 10:02 mfxaudio.h
    -rw-r--r-- 1 zao zao 4767 Jun 3 10:00 mfxcommon.h
    -rw-r--r-- 1 zao zao 6306 Jun 3 09:58 mfxdefs.h
    -rw-r--r-- 1 zao zao 2865 Jun 3 10:00 mfxenc.h
    -rw-r--r-- 1 zao zao 2976 Jun 3 09:58 mfxjpeg.h
    -rw-r--r-- 1 zao zao 2900 Jun 3 10:00 mfxla.h
    -rw-r--r-- 1 zao zao 3048 Jun 3 09:58 mfxmvc.h
    -rw-r--r-- 1 zao zao 2881 Jun 3 09:58 mfxpak.h
    -rw-r--r-- 1 zao zao 28117 Jun 3 09:58 mfxplugin++.h
    -rw-r--r-- 1 zao zao 11066 Jun 3 10:00 mfxplugin.h
    -rw-r--r-- 1 zao zao 2647 Jun 3 09:58 mfxsession.h
    -rw-r--r-- 1 zao zao 38541 Jun 3 10:00 mfxstructures.h
    -rw-r--r-- 1 zao zao 10411 Jun 3 10:00 mfxvideo++.h
    -rw-r--r-- 1 zao zao 6257 Jun 3 10:00 mfxvideo.h
    -rw-r--r-- 1 zao zao 2690 Jun 3 09:58 mfxvp8.h
    -rw-r--r-- 1 zao zao 1662 Jun 3 09:58 mfxvstructures.h
    But configure cant't find the files:
    [root@nuc FFmpeg]# git pull
    Already up-to-date.
    [root@nuc FFmpeg]# ./configure --enable-libmfx --enable-nonfree --enable-iconv --arch=x86 --disable-debug --disable-shared --disable-doc --disable-w32threads --enable-gpl --enable-version3 --enable-runtime-cpudetect --enable-avfilter --enable-bzlib --enable-zlib --enable-librtmp --enable-gnutls --enable-avisynth --enable-frei0r --enable-filter=frei0r --enable-libbluray --enable-libcaca --enable-libopenjpeg --enable-fontconfig --enable-libfreetype --enable-libass --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvo-amrwbenc --enable-libschroedinger --enable-libsoxr --enable-libtwolame --enable-libspeex --enable-libtheora --enable-libutvideo --enable-libvorbis --enable-libvo-aacenc --enable-libopus --enable-libvidstab --enable-libvpx --enable-libwavpack --enable-libxavs --enable-libx264 --enable-libx265 --enable-libxvid --enable-libzvbi
    ERROR: libmfx not found using pkg-config
    If you think configure made a mistake, make sure you are using the latest
    version from Git. If the latest version fails, report the problem to the
    [email protected] mailing list or IRC #ffmpeg on irc.freenode.net.
    Include the log file "config.log" produced by configure as this will help
    solve the problem.
    Sorry for being new at this, but I really want to learn
    Thanks in advance, zAo

    Did a restart from scratch: removed all *mfx* files from /usr/*, removed all build files and downloaded them again. Apart from make install, everything is run as my desktop user.
    [zao@nuc mfx_dispatch]$ mkdir build && cd build
    [zao@nuc build]$ cmake .. -DCMAKE_INSTALL_PREFIX=/usr/local
    -- The C compiler identification is GNU 5.1.0
    -- The CXX compiler identification is GNU 5.1.0
    -- Check for working C compiler: /usr/bin/cc
    -- Check for working C compiler: /usr/bin/cc -- works
    -- Detecting C compiler ABI info
    -- Detecting C compiler ABI info - done
    -- Detecting C compile features
    -- Detecting C compile features - done
    -- Check for working CXX compiler: /usr/bin/c++
    -- Check for working CXX compiler: /usr/bin/c++ -- works
    -- Detecting CXX compiler ABI info
    -- Detecting CXX compiler ABI info - done
    -- Detecting CXX compile features
    -- Detecting CXX compile features - done
    -- Intel Media SDK is here: /media/downloads/git/mfx_dispatch
    -- Configuring done
    -- Generating done
    -- Build files have been written to: /media/downloads/git/mfx_dispatch/build
    Start build
    [zao@nuc build]$ make -j
    Scanning dependencies of target mfx
    [ 8%] [ 16%] [ 25%] [ 50%] [ 41%] [100%] [ 41%] [ 66%] [ 66%] [ 75%] [ 83%] [ 91%] Building CXX object CMakeFiles/mfx.dir/src/mfx_dxva2_device.cpp.o
    Building CXX object CMakeFiles/mfx.dir/src/main.cpp.o
    Building CXX object CMakeFiles/mfx.dir/src/mfx_library_iterator.cpp.o
    Building CXX object CMakeFiles/mfx.dir/src/mfx_library_iterator_linux.cpp.o
    Building CXX object CMakeFiles/mfx.dir/src/mfx_critical_section.cpp.o
    Building CXX object CMakeFiles/mfx.dir/src/mfx_load_dll.cpp.o
    Building CXX object CMakeFiles/mfx.dir/src/mfx_dispatcher_log.cpp.o
    Building CXX object CMakeFiles/mfx.dir/src/mfx_function_table.cpp.o
    Building CXX object CMakeFiles/mfx.dir/src/mfx_critical_section_linux.cpp.o
    Building CXX object CMakeFiles/mfx.dir/src/mfx_load_dll_linux.cpp.o
    Building CXX object CMakeFiles/mfx.dir/src/mfx_dispatcher.cpp.o
    Building CXX object CMakeFiles/mfx.dir/src/mfx_win_reg_key.cpp.o
    Linking CXX static library libmfx.a
    [100%] Built target mfx
    Install
    [zao@nuc build]$ sudo make install
    [100%] Built target mfx
    Install the project...
    -- Install configuration: ""
    -- Installing: /usr/local/include/mfxjpeg.h
    -- Installing: /usr/local/include/mfxplugin++.h
    -- Installing: /usr/local/include/mfxastructures.h
    -- Installing: /usr/local/include/mfxla.h
    -- Installing: /usr/local/include/mfxenc.h
    -- Installing: /usr/local/include/mfxcommon.h
    -- Installing: /usr/local/include/mfxplugin.h
    -- Installing: /usr/local/include/mfxvp8.h
    -- Installing: /usr/local/include/mfxdefs.h
    -- Installing: /usr/local/include/mfxmvc.h
    -- Installing: /usr/local/include/mfxstructures.h
    -- Installing: /usr/local/include/mfxvideo.h
    -- Installing: /usr/local/include/mfxvstructures.h
    -- Installing: /usr/local/include/mfxaudio++.h
    -- Installing: /usr/local/include/mfxpak.h
    -- Installing: /usr/local/include/mfxvideo++.h
    -- Installing: /usr/local/include/mfxaudio.h
    -- Installing: /usr/local/include/mfxsession.h
    -- Installing: /usr/local/lib/pkgconfig/libmfx.pc
    -- Installing: /usr/local/lib/libmfx.a
    pkg-config doesn’t find the right files:
    [zao@nuc build]$ pkg-config --list-all| grep mfx
    [zao@nuc build]$ echo $?
    1
    I know that building via PKGBUILD is much cleaner, but -for me- it add additional levels of complexity.
    Any tips or ideas? Thanks for your patience

Maybe you are looking for