C6380 is installed in Windows 7 64-bit but will not print

Question

I recently bought a Pavillion dv-2210ev windows 7 64bit, and would like to wi-fi connect it to my c6380. It works well with my desktop (wirelessly also), and got the Solutions Center installed perfectly on the Pavillion. It scans as requested from the computer.
However, it won't print. I will send a document to the printer (c6300 series), but it doesn't even get to the print queue, and won't print on the tray. No error messages at all. Just silence. Only the pop-up window down right corner of HP saying that print job is starting.
I tried 2-3 reinstalls, tried to create a port myself (locally and then standard IP/TCP as suggested by some people here), even created some rules for the firewall which I found from the Network Diagnostic Program that's on hp.com. I tried the trick with the bidirectional support and it didn't work either.
Any ideas? This c6380 starts to hit my nerves, since it works only with the desktop, and not painlessly all the time.

Answer 1

Try to delete printer in Control Panel and re-add:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP