C6S Install only partly Successful

Hi, my serial number arrived today and I tried installing CS6 on my XP Pro SP3 machine and only half installed...?
The error message I received (in Full) is below - it seems to imply I dod not have enough system resources but the minimum specs (on the Adobe website) are met ..?
The other scarey bit is where it says the configuration data is corrupt WTF?
Any help is appreciated...
Product Specs:
DSST CS6 WIN ESDR
System Specs:
Intell Core 2 CPU 2.33Ghz
2Gig of Ram
XP Pro SP3
Error Mesage:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF012, DW063 ... WARNING: DW024, DW064 ...
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 13 error(s), 2 warning(s)
WARNING: DW024: The payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS6 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DW064: Memory requirements not met for {CFB770D7-8D43-1014-922B-CC2715FADE3F} Adobe InDesign CS6 Application Base Files 8.0.0.0
----------- Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1610 - The configuration data for this product is corrupt.  Contact your support personnel.
MSI Error message:
----------- Payload: {7D4E9D10-AED6-485D-A2B0-9A1DF1A55545} Adobe Illustrator CS6 Core 16.0.0.0 -----------
ERROR: DF012: Unable to locate file at "C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{7D4E9D10-AED6-485D-A2B0-9A1DF1A55545}\_3_d41da349e4c033 3f1216ecd73e817f07"(Seq 3)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 3)
----------- Payload: {CFB770D7-8D43-1014-922B-CC2715FADE3F} Adobe InDesign CS6 Application Base Files 8.0.0.0 -----------
FATAL: DS003: Cannot extract 'D:\Adobe CS6\payloads\AdobeInDesign8AppBase-mul\Assets1_1.zip' to 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{CFB770D7-8D43-1014-922B-CC2715FADE3F}'. Error: Error 23 Data error (cyclic redundancy check).
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050:  - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050:  - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_GB: Install failed
ERROR: DW050:  - Adobe InDesign CS6 Common Language Files_AdobeInDesign8CommonLang-en_US: Install failed
ERROR: DW050:  - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050:  - Adobe InDesign CS6 Application Language Files_AdobeInDesign8AppLang-en_GB: Install failed
ERROR: DW050:  - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050:  - Adobe Illustrator CS6 Core_AdobeIllustrator16en_GBLanguagePack: Install failed
ERROR: DW050:  - Adobe Mini Bridge CS6: Install failed
ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed
ERROR: DW050:  - Adobe InDesign CS6 Application Base Files: Failed due to Language Pack installation failure

Download the MSVC runtimes 2008 and 2009 from Microsoft and install them manually. Run the Creative Suite Cleaner Tool and try the install again.
Mylenium

Similar Messages

  • Importing from  HDD camera panasonic only partly successful : one third of images imported. The rest can't be imported ! Problem has arisen since update to iMovie 10.0.2

    Since the  latest update to iMovie 10.0.2   uploading video has become a problem : only one third of the videoscenes has been imported.
    I don't succeed in importing the rest. 
    There's a symbol     ( triangle above a dash )  that I get , but I have no idea what it means .
    I didn't use to have any problem with the preceding version.
    My camera is a Panasonic HDD    six years old.
    All help and suggestions welcome

    I'afraid it was a mistake to remove the event from the library using the Finder.  (It is never a good idea to mess with the contents of libraries with the Finder).  It would have been better to move the event from within iMovie to a different library then move that library to some external storage to free up space.
    You can't replace the event with the Import function - that is for adding clips to an event. 
    Libraries containing events from earlier versions of iMovie should be updated automatically, (after you accept a notification that they need to be updated) but you now have an event that iMovie no longer "knows about" and which contains projects which are also out of date.   At least you have the original media from the event back but I don't know how you can restore the projects unless you have a backup of the library from the earlier version of iMovie that contains the problem event. 
    probably not a solution but I hope this helps.
    Geoff.

  • PDF Reading IE Add-In Install Only

    Hello,
    My firm is a little dated with our Adobe Acrobat software as we use Adobe Acrobat Pro 9. With the release of IE 11, there seems to be an issue with the compatibility between it and the Adobe Acrobat 9 Pro PDF add-in for Internet Explorer.
    I believe there's a way to install Adobe Reader and then enable just the Add-In, I understand that. My question is whether or not there's a way to use an up-to-date version of the Adobe Reader XI Internet Explorer Add-In by itself without installing Adobe Reader. I would like to avoid the confusion that my users will inevitably run into if I were to install both programs.
    Thanks for any input you may have. I will await with bated breath.
    BiiirdMan
    I mean..Biiird Laaaw

    I don't think it is possible, or permitted, to selectively install only parts of Reader. And indeed, it simply wouldn't work. The IE add-ins are not PDF viewers. They are simply little things that run Adobe Reader to do the work of displaying, and then the IE add in makes sure the results end up in the IE window.

  • HT1725 What do I do if only part of a song I purchased actually downloaded successfully and itunes is saying it downloaded successfully?

    What do I do if only part of a song I purchased actually downloaded successfully and itunes is saying it downloaded successfully?
    The song is supposed to last for 2mins 46sec but it cuts out less than a min in to the song.
    There is no notification that the download was unsuccessful or incomplete and the 'search for available downloads' option comes back that all songs are downloaded.
    What can I do without having to purchase the song again?

    Depending upon what country that you are in (music can't be re-downloaded in all countries) have you tried deleting it from your iTunes library and redownloading it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes ? If it's still in your iTunes library then iTunes will assume that it doesn't need re-downloading. Re-downloading.
    If you aren't in a country where you can re-download music or if it re-downloads in the state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link.

  • I have Adobe Acrobat installed as part of the CS6 suite.  It has stopped working (yet again -- it has done that three of four times over the last year).  I have spent days trying to repair it; etc. without any success.  The last time this happened, it was

    I have Adobe Acrobat installed as part of the CS6 suite.
    It has stopped working (yet again -- it has done that three of four times over the last year).
    I have spent days trying to repair it; etc. without any success.
    The last time this happened, it was necessary for someone from Adobe to reinstall it entirely, if I remember correctly.
    I give up. Can anyone tell me what I must do get the program to actually work?
    I spend more time trying to get Adobe Acrobat to work, than I do actually doing my work.
    My OS is Windows 8.1.  My system has 16 MB of RAM, and hard disks are not overfilled.
    I run update virus checker (Kaspersky) daily.
    Cheers,
    Hugh

    Hi Hugh ,
    Could you please tell what are the challenges you are facing while trying to access Acrobat ?
    Do you get any error message ?If yes ,please share the screen shot of the same.
    Please try the solution outlined here: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html
    OR
    Try repairing it from Control panel, or try launching it with a different user account and check if it works or not.
    Install the latest updates for Acrobat X from the link : http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
    and check.
    Let us know how it goes,
    Regards
    Sukrit Dhingra

  • Error Message on Web Premium Suite while opening Acrobat that Adobe Acrobat was installed as part of a Suite

    Can not open Acrobat Pro 9 out of my adobe creative suite 4 web premium.  Keeps giving an error message. Adobe Acrobat was installed as part of a suite.  To enable Adobe Acrobat start another component of this suite.  I am running Windows 7 64 and already have the CS6 Premium Production Suite loaded on my computer.  I really don't need to load all of the Web Premium since I have upgraded to CS6 programs but still need the Acrobat.  My hard drive crashed and I've had to start all over again.  This is the only glitch and it's becoming very frustrating.
    Can't find a link to actually speak to someone at Adobe.

    you'll need to install and open some other 32 bit cs4 app.

  • Why did only part of my song download?

    I downloaded a song and only part of it completed but it isn't still in the download section. How do I fix this?

    I have the same problem with many songs. More if the song is a track in an Album, se next song start and plays for the remaining time of the first one! I tryed to redownload with no success . The problem is not only with the uploaded songs but also with the matched!

  • CiscoWorks: Why all devices Sync archive only partially successful.

    Hi,
    Whenever we sync archive a device, its always partially successfull only,  and when we click partial successfull , below details appears. We have 4000 devices and all are only partially successful only Below details are from partial successful device, it has the vlan. dat and before it was working ok.
    *** Device Details for Device1 *** Protocol ==> Telnet Selected Protocols with order ==> SSH,Telnet,TFTP,RCP,HTTPS
    Execution Result: CM0062 Polling Device1 for changes to configuration. CM0065 No change in PRIMARY STARTUP config, config fetch not required CM0065 No change in PRIMARY RUNNING config, config fetch not required CM00 Polling not supported on VLAN RUNNING config, defaulting to fetch. VLAN CM0057 VLAN RUNNING Config fetch SUCCESS, archival failed for Device1 Cause: CM0005: Archive does not exist for Device1 Action: Verify that archive exists for device.
    Also If I goto e:\NMSROOT\files\rme\jobs\ArchiveMgmt\6523(JOBID) and then log, below is output from logs.
    [ Mon Nov 14  14:55:37 GMT 2011 ],ERROR,[main],com.cisco.nm.rmeng.dcma.jobdriver.DcmaJobExecutor,initJobPolicies,925,Could not configure Thread.
    [ Mon Nov 14  14:55:37 GMT 2011 ],ERROR,[main],com.cisco.nm.rmeng.dcma.jobdriver.DcmaJobExecutor,sendMail,1334,sendEmailMessage: Null recipient list
    [ Mon Nov 14  14:56:20 GMT 2011 ],ERROR,[main],com.cisco.nm.rmeng.dcma.jobdriver.DcmaJobExecutor,sendMail,1334,sendEmailMessage: Null recipient list
    I am getting below logs,please advice, how to resolve the issue.
    Thanks.
    I am using LMS 3.2.1

    Yes you are right that we have restore from backup and since then this problem occurs. We have uninstall the CiscoWorks from c: drive and install it on e:drive, due to high disk utilization issue on c: drive.
    I have checked the
    RME > Administration > Config Management > Archive Management > Archive settings and setting is already e: /CIS~1/files/rme/dcma,
    Also from dbreade, by executing the sql "select * from Config_Device_Archive" in rmeng, I can see that some file location is C:drive and orther files location is E: drive, so I have run the below sql to correct it, although it executed correctly, by I can see that Config_Device_Archive table that still some devices location is c:, others is e: drive.
    update Config_Device_Archive set
    location=replace(location,'C:\\PROGRA~1\\CSCOpx','E:\\CAPCIS~1')
    Please advice, that how to resolve this issue.
    Thanks

  • Install only 32bit version of AX Flash Player for IE8 and Windows 7 64bit

    Hi,
    For several reasons I would like to install only the 32bit version of Flash Player AX for IE 8 and Windows 7 64bit.
    It was possible to do it when the installers where separated but I see no information how to do that now.
    It is very convenient for me to have my 64 bit IE 8 browser without Flash that I use to browse and not get annoyed by the flash on the web and use the 32bit IE 8 on youtube, vimeo, etc when flash is necessary.
    I hope the option to choose which version to install will get back if it is not possible now.
    Please let me know if such kind of request should be made somewhere else as new feature or whatever.
    Thank you.

    That was the first thing I tried. It either works on both or disables on both versions. Something is messed with the settings as well, or has been made that way on purpose. Also the next thing I tried was to uninstall only the part residing in System 32 (leaving the one in SysWOW64) but the result was both not working after the uninstall. It remained in Programs but wasn't working anymore in both versions of IE 8. So I just put back the latest 32bit version which is not security wise..

  • 64-bit version of  "libucb.so.1" not installed as part of SUNWscpu

    Hi,
    64-bit version of "libucb.so.1" not installed as part of SUNWscpu in solaris 9 server. Where as it is present in solaris 10 server. Please suggest.
    Solaris 9 System
    # pwd
    /var/sadm/install
    # more contents | grep libucb.so.1
    /usr/ucblib/libucb.so=./libucb.so.1 s none SUNWscpu
    /usr/ucblib/libucb.so.1 f none 0755 root bin 53516 11571 1018135482 SUNWscpu
    # cd /usr/ucblib
    # file libucb.so.1
    libucb.so.1: ELF 32-bit MSB dynamic lib SPARC Version 1, dynamically linked, not stripped
    Solaris 10 system
    # pwd
    /var/sadm/install
    # more contents | grep libucb.so.1
    /usr/ucblib/libucb.so=./libucb.so.1 s none SUNWscpu
    /usr/ucblib/libucb.so.1 f none 0755 root bin 60768 2901 1106443753 SUNWscpu
    /usr/ucblib/sparcv9/libucb.so=./libucb.so.1 s none SUNWscpu
    /usr/ucblib/sparcv9/libucb.so.1 f none 0755 root bin 75448 59258 1106443754 SUNWscpu
    # cd /usr/ucblib/sparcv9
    # file libucb.so.1
    libucb.so.1: ELF 64-bit MSB dynamic lib SPARCV9 Version 1, dynamically linked, not stripped, no debugging information available
    Thanks & Regards

    I assume this is a SPARC system.
    The Solaris 10 version for SPARC only comes in 64 bit version, whereas the Solaris 9 came in both a 32 bit and a 64 bit version, hence, where there is only one (64 bit) package for Solaris 10 there will be two packages for Solaris 9.
    The 64-bit packages for Solaris 9 had an "x" at the end, hence, the Solaris 9 64-bit version of libucb.so.1 should be found in a package called SUNWscpux.
    .7/M.

  • Teredo Win7 x64 works only partly no ping

    Hi,
    System is W510 Lenovo, Win7 Ultimate, x64, all updates installed, only win7 firewall running. Network is IPV4 Router. All XP clients have successful teredo client running and can access ipv6 Websites (www.six.heise.de).
    On win7 PCs:
    -Teredo is running in qualified state. (both clients tested, client and enterprise client)
    -LAN adapter has static ipv6 adress and route to Teredo; see attached setting.
    -nslookup six.heise.de delivers ipv6 adress Server: 
    google-public-dns-a.google.com
    Address:  8.8.8.8
    Name:    six.heise.de
    Address:  2a02:2e0:3fe:1001:302::
    of the website but I can't ping it and even not open it in IE. Same behavior for other IPV6 Websites.
    I have the same problem on my win7 PCs (Leneovo W510 and X61t). Attached the basic system settings. By the way, vmplayer 6 is installed on both.
    Thx for any help.
    Kind regards,
    Andreas
    Setting of the system
    ipconfig -all*************************
    Windows-IP-Konfiguration
       Hostname  . . . . . . . . . . . . : W-64
       Prim„res DNS-Suffix . . . . . . . :
       Knotentyp . . . . . . . . . . . . : Hybrid
       IP-Routing aktiviert  . . . . . . : Nein
       WINS-Proxy aktiviert  . . . . . . : Nein
    Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung Intel:
       Verbindungsspezifisches DNS-Suffix:
       Beschreibung. . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6200 AGN
       Physikalische Adresse . . . . . . : 00-27-10-32-B5-A8
       DHCP aktiviert. . . . . . . . . . : Ja
       Autokonfiguration aktiviert . . . : Ja
       IPv6-Adresse. . . . . . . . . . . : 2002:c0a8:102::(Dupliziert)
       Verbindungslokale IPv6-Adresse  . : fe80::e0e1:491:39ba:81cf%21(Bevorzugt)
       IPv4-Adresse  . . . . . . . . . . : 192.168.4.177(Bevorzugt)
       Subnetzmaske  . . . . . . . . . . : 255.255.255.0
       Lease erhalten. . . . . . . . . . : Montag, 21. April 2014 10:55:09
       Lease l„uft ab. . . . . . . . . . : Donnerstag, 28. Mai 2150 17:27:53
       Standardgateway . . . . . . . . . : 192.168.4.1
       DHCP-Server . . . . . . . . . . . : 192.168.4.1
       DHCPv6-IAID . . . . . . . . . . . : 553658128
       DHCPv6-Client-DUID. . . . . . . . : 00-01-00-01-18-BF-E1-DB-00-1D-72-9E-05-51
       DNS-Server  . . . . . . . . . . . : 8.8.8.8
                                           8.8.4.4
       Prim„rer WINS-Server. . . . . . . : 192.168.4.187
       Sekund„rer WINS-Server. . . . . . : 192.168.4.187
       NetBIOS ber TCP/IP . . . . . . . : Aktiviert
    Ethernet-Adapter LAN-Verbindung :
       Medienstatus. . . . . . . . . . . : Medium getrennt
       Verbindungsspezifisches DNS-Suffix:
       Beschreibung. . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Connection
       Physikalische Adresse . . . . . . : F0-DE-F1-0B-B6-FD
       DHCP aktiviert. . . . . . . . . . : Ja
       Autokonfiguration aktiviert . . . : Ja
    Tunneladapter Teredo Tunneling Pseudo-Interface:
       Verbindungsspezifisches DNS-Suffix:
       Beschreibung. . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP aktiviert. . . . . . . . . . : Nein
       Autokonfiguration aktiviert . . . : Ja
       IPv6-Adresse. . . . . . . . . . . : 2001:0:5ef5:79fb:1095:a7b:dafa:caa7(Bevorzugt)
       Verbindungslokale IPv6-Adresse  . : fe80::1095:a7b:dafa:caa7%41(Bevorzugt)
       Standardgateway . . . . . . . . . : ::
       NetBIOS ber TCP/IP . . . . . . . : Deaktiviert
    Tunneladapter isatap.{2BEC77EE-1DEB-4ED3-929A-5A882F8BDD3C}:
       Verbindungsspezifisches DNS-Suffix:
       Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter #2
       Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP aktiviert. . . . . . . . . . : Nein
       Autokonfiguration aktiviert . . . : Ja
       Verbindungslokale IPv6-Adresse  . : fe80::5efe:192.168.4.177%42(Bevorzugt)
       Standardgateway . . . . . . . . . :
       DNS-Server  . . . . . . . . . . . : 8.8.8.8
                                           8.8.4.4
       NetBIOS ber TCP/IP . . . . . . . : Deaktiviert
    Tunneladapter isatap.{64A42BE7-9839-4B7D-B0C9-388760205EFF}:
       Medienstatus. . . . . . . . . . . : Medium getrennt
       Verbindungsspezifisches DNS-Suffix:
       Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter #3
       Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP aktiviert. . . . . . . . . . : Nein
       Autokonfiguration aktiviert . . . : Ja
    Tunneladapter 6TO4 Adapter:
       Medienstatus. . . . . . . . . . . : Medium getrennt
       Verbindungsspezifisches DNS-Suffix:
       Beschreibung. . . . . . . . . . . : Microsoft-6zu4-Adapter
       Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP aktiviert. . . . . . . . . . : Nein
       Autokonfiguration aktiviert . . . : Ja
    ***************************************route
    ===========================================================================
    Schnittstellenliste
     21...00 27 10 32 b5 a8 ......Intel(R) Centrino(R) Advanced-N 6200 AGN
     20...f0 de f1 0b b6 fd ......Intel(R) 82577LM Gigabit Network Connection
      1...........................Software Loopback Interface 1
     41...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
     42...00 00 00 00 00 00 00 e0 Microsoft-ISATAP-Adapter #2
     43...00 00 00 00 00 00 00 e0 Microsoft-ISATAP-Adapter #3
     44...00 00 00 00 00 00 00 e0 Microsoft-6zu4-Adapter
    ===========================================================================
    IPv4-Routentabelle
    ===========================================================================
    Aktive Routen:
         Netzwerkziel    Netzwerkmaske          Gateway    Schnittstelle Metrik
              0.0.0.0          0.0.0.0      192.168.4.1    192.168.4.177     25
            127.0.0.0        255.0.0.0   Auf Verbindung         127.0.0.1    306
            127.0.0.1  255.255.255.255   Auf Verbindung         127.0.0.1    306
      127.255.255.255  255.255.255.255   Auf Verbindung         127.0.0.1    306
          192.168.4.0    255.255.255.0   Auf Verbindung     192.168.4.177    281
        192.168.4.177  255.255.255.255   Auf Verbindung     192.168.4.177    281
        192.168.4.255  255.255.255.255   Auf Verbindung     192.168.4.177    281
            224.0.0.0        240.0.0.0   Auf Verbindung         127.0.0.1    306
            224.0.0.0        240.0.0.0   Auf Verbindung     192.168.4.177    281
      255.255.255.255  255.255.255.255   Auf Verbindung         127.0.0.1    306
      255.255.255.255  255.255.255.255   Auf Verbindung     192.168.4.177    281
    ===========================================================================
    St„ndige Routen:
      Keine
    IPv6-Routentabelle
    ===========================================================================
    Aktive Routen:
     If Metrik Netzwerkziel             Gateway
     41    306 ::/0                     Auf Verbindung
      1    306 ::1/128                  Auf Verbindung
     41     58 2001::/32                Auf Verbindung
     41    306 2001:0:5ef5:79fb:1095:a7b:dafa:caa7/128
                                        Auf Verbindung
     21    281 fe80::/64                Auf Verbindung
     41    306 fe80::/64                Auf Verbindung
     42    276 fe80::5efe:192.168.4.177/128
                                        Auf Verbindung
     41    306 fe80::1095:a7b:dafa:caa7/128
                                        Auf Verbindung
     21    281 fe80::e0e1:491:39ba:81cf/128
                                        Auf Verbindung
      1    306 ff00::/8                 Auf Verbindung
     41    306 ff00::/8                 Auf Verbindung
     21    281 ff00::/8                 Auf Verbindung
    ===========================================================================
    St„ndige Routen:
     If Metrik Netzwerkziel             Gateway
      0 4294967295 ::/0                     Auf Verbindung
    ===========================================================================
    **************************Teredo state
    Teredo-Parameter
    Typ                     : enterpriseclient
    Servername              : teredo.ipv6.microsoft.com.
    Clientaktual.-intervall : 30 Sekunden
    Clientport              : unspecified
    Status                  : qualified
    Clienttyp             : Teredo client
    Netzwerk                 : managed
    NAT                     : restricted
    NAT-spezifisches Verhalten   : UPNP: Ja, Portbeibehaltung: Nein
    Lokale Zuordnung           : 192.168.4.177:57598
    Externe NAT-Zuordnung    : 37.5.53.88:62852

    Hi,
    Sorry for the German version of Win7. If you aggree I would liket to say in the US Forum.
    tracert has timeout.
    Kind regards,
    Andreas
    Routenverfolgung zu six.heise.de [2a02:2e0:3fe:1001:302::] ber maximal 30 Abschnitte:
      1     *        *        *     Zeitberschreitung der Anforderung.
      2     *        *        *     Zeitberschreitung der Anforderung.
      3     *        *        *     Zeitberschreitung der Anforderung.
      4     *        *        *     Zeitberschreitung der Anforderung.
      5     *        *        *     Zeitberschreitung der Anforderung.
      6     *        *        *     Zeitberschreitung der Anforderung.
      7     *        *        *     Zeitberschreitung der Anforderung.
      8     *        *        *     Zeitberschreitung der Anforderung.
      9     *        *        *     Zeitberschreitung der Anforderung.
     10     *        *        *     Zeitberschreitung der Anforderung.
     11     *        *        *     Zeitberschreitung der Anforderung.
     12     *        *        *     Zeitberschreitung der Anforderung.
     13     *        *        *     Zeitberschreitung der Anforderung.
     14     *        *        *     Zeitberschreitung der Anforderung.
     15     *        *        *     Zeitberschreitung der Anforderung.
     16     *        *        *     Zeitberschreitung der Anforderung.
     17     *        *        *     Zeitberschreitung der Anforderung.
     18     *        *        *     Zeitberschreitung der Anforderung.
     19     *        *        *     Zeitberschreitung der Anforderung.
     20     *        *        *     Zeitberschreitung der Anforderung.
     21     *        *        *     Zeitberschreitung der Anforderung.
     22     *        *        *     Zeitberschreitung der Anforderung.
     23     *        *        *     Zeitberschreitung der Anforderung.
     24     *        *        *     Zeitberschreitung der Anforderung.
     25     *        *        *     Zeitberschreitung der Anforderung.
     26     *        *        *     Zeitberschreitung der Anforderung.
     27     *        *        *     Zeitberschreitung der Anforderung.
     28     *        *        *     Zeitberschreitung der Anforderung.
     29     *        *        *     Zeitberschreitung der Anforderung.
     30     *        *        *     Zeitberschreitung der Anforderung.
    Ablaufverfolgung beendet.

  • When I try to move an object in Illustrator CS3 only part of it moves, so the object "stretches".

    This doesnt always happen, but I cant figure out what I do differently when I  am able to move the object successfully. Obviously these are multipart objects.  My workaround is to copy the object an paste it...then most times it moves correctly.

    mridude wrote:
    Yes. I usually select the group of objects with the white arrow by dragging around them. Then change to the black arrow to move them.
    Obviously you're not 'capturing' all the anchor points... so, you're getting only part and not the entire object. Use the black arrow to select.... you'll get the whole object... then drag or use the Transform tool to move it.

  • Re-installing only OS X

    Hi,
    I run the latest OS on my MacMini Intel machine. My installversion on disc that I got with it is 10.4.5.
    The OS and programs were already installed when I got the Mac, but since there are some problems with booting up and also with Spotlight, etc. I would like to re-install ONLY the OS (not the programs).
    Is it possible to install only the Operating System WITHOUT formatting the HD or changing any of the preferencefiles, programfiles or my own files? If it is, how do I do that?
    Thanks,
    Kind regards,
    Webbie

    Re-installing OS X should always be used as a final/last resort.
    What are your problems with booting and also with Spotlight and what troubleshooting steps have you already tried to resolve these problems?
    You can re-install OS X with the install package that shipped with your Mini via an Archive & Install selecting preserve user and network settings. The OS is installed completely new (v10.4.5) and all user and network settings, user data and 3rd party applications are transferred to the new system. The old system is archived and saved as a Previous System Folder. You can't boot the computer from or use the archived Previous System Folder for any other purpose than to recover existing data or settings that were not successfully transferred to the new system. After confirming everything was successfully transferred to the new system, you can and should safely delete the archived Previous System Folder to free up hard drive space.
    Afterwards, you will also need to run Software Update to install all available updates included with 10.4.8.
    You should update your backup before re-installing.
    Before re-installing, boot from the Tiger install disc that shipped with your Mac, select your language and at the Installer screen, navigate to Disk Utility via the Installer menu bar. Select Macintosh HD in the list of drives and volumes and under the First Aid tab, select Repair Disk. If any problems are reported and successfully repaired, run repair again until no problems are reported.
    Quit Disk Utility and the focus will return to the Installer.
    http://docs.info.apple.com/article.html?artnum=107120

  • HT201272 Downloaded only part of songs

    Hi there,
    During an attempt to download purchases from iTunes Store, one album did not successfully download, for every song on the album only parts of each song are downloaded even thought the counter shows the full song as being there. How can I re-download?

    Your suggestion got me a reply from Apple which had some suggestions.  One of which was restarting iTunes.  I had already done that and finally after two shutdowns of the computer and restarting iTunes I was able to go to check available downloads.  The downloads began again and completed.
    I had tried to delete the partially downloaded songs so they could be reloaded but didn't knoe the trick to do this.  If you want to delet songs hold down the option and delete keys to get a dialog box to verify deletion.  here is the method from Apple.
    "On a Mac:  Press the Option key and the Delete key on the keyboard.
    On Windows: Press the Shift key and the Delete key on the keyboard.
    The following dialogue will appear: “Are you sure you want to remove the selected song from your iTunes library?”
    Note: If you do not see this message when deleting files from the library, you may have selected the option “Do not ask me again” at some point in the past. To allow iTunes to display this message again, open the Advanced tab of the iTunes Preferences, and click the Reset button next to “Reset all dialogue warnings.”
    This second dialogue may also appear: “Do you want to move the selected song to the Trash, or keep it in the iTunes Media folder? Only files in the iTunes Media folder will be moved to the Trash.”
    Note: This message will not appear if all of the selected files are stored outside of the iTunes Media folder location. iTunes will leave these files on your computer wherever they are located"

  • "Only Part I" for Goods receipt (MIGO) in excise invoice tab

    Dear Gurus,
    I have configured a material with all CIN configuration setting, while doing goods receipt for that material I want to capture excise invoice through excise invoice tab, for which i need to select " Only Part 1" in the invoice tab.
    But in my currrent senario while posting goods recipt, In excise invoice tab, I am not detting " Only part 1" option when i select excise invoice tab.
    How to configure "only part 1" option to appear in  excise invoice tab.
    Kindly help...
    Regards,
    Prashanth Pai

    Hi,
    Check in
    Tax on Goods Movements - India - Business Transactions - Incoming Excise Invoices -  Specify Which Movement Types Involve Excise Invoices -
    ensure that RG23A & RG23 C Register is maintained against the movement types you are using.
    Regards,
    Vikas

Maybe you are looking for