C7 catching 2G network but not catching 3G/3.5G ne...

I have been using Nokia C7, operator being Vodafone 3G SIM. My Nokia C7 is not catching 3G signal, but when i am using same SIM in anogther Nokia 5230 its getting full access to 3G network at same place. but when I am using 2G network I get good signal in both the mobiles.
When I go towards my tarrace in that case my C7 mobile gets bit of 3.5G signal. Also, when I use same Voda SIM in laptop modem I get full 3G signal. Please suggest how do I solve this problem?
Also, I have used all type of setting manual/dual mode/Automatic mode everything....in C7. But the problem remains the same...

Hi saurabh815,
welcome to the forums the problem you told may be your hardware prob. Your nokia C7 isn't ctchng sgnl in your room, I think that it is nt able to catch 3g sgnls in enclosd room.

Similar Messages

I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use Lightr

I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use Lightroom.

Hi,
could you please give us some info on what kind of network you have?
Can other application communicate with the web?
Thanks,
Ignacio

Problem viewing streaming video in some wifi networks, but not others

When I am at work (university), I can not view YouTube videos or video streaming from news sites such as cnn mobile on my ipod touch 2g.
<m.cnn.com/videos.jsp?ckey-cnn)06#__1_>
When I called Apple support, they had me reset-restore. I still had the problem. I went to the Apple store Genius bar and the problem no longer existed, the videaos downloaded and played from both sites!
But at my diner and at work, I get the message, "This movie could not be played" in a popup box with an OK button. The same message appears if I use the YouTube application. I click on any video, and the same popup appears. In Cnn the popup is preceded by a shaded capital Q that looks like the blue Quicktime Q; in Youtube the pupup is preceded by a YouTube icon in gray with the "Tube" surrounded by the rounded rectangle, their icoon...
At the Apple store the popup never appeared, and the videos downloaded and played.
I have no trouble playing movies I have downloaded from iTunes.
I did not have this problem when I initially got my iPod Touch, and I think it appeared after one of the last two system upgrades, but I am not sure.
I am curious that it the problem happens at two places, my diner and at work.
The speed of my wireless work network, as judged by the ipod app speed test is 9915 kbps download and 6971 kbps upload, so plenty fast.
The first time I noticed this issue was with the application "At Bat Lite" which also won't play video highlights at work.
I do not have WiFi at home
Any thoughts about what would cause this lack of functionality apparantly only at some networks but not others?
Oh, one more piece of data: at work a Macbook will play YouTube both on ethernet and using wifi...
Thanks for any thoughts or suggestions,
Paul

It seems I have two networks available at work, one is behind our firewall, and I login to it. This is the network that I can't view streaming video. There is also a "Guest" network that I don't need to login to. This one works with the YouTube and the news site videos.
Thus, I conclude there is a setting that WiFi network administrators can invoke that specifically can block streaming video on some protocols (whatever the ipod touch uses) and not others (whatever the Macbook uses). But the same router hardware supplying the Guest network does not block these protocols. Presumably this has to do with security on one side of the firewall(?)
Anyway, apparently outside of the WiFi controls available in the ipod touch settings.
Weird...
Paul

HT1595 apple tv will connect to network but not internet

apple tv will connect to network but not internet

I have unplugged the apple TV but it still says noat connected. However, it has accessed some movies but when I try to purchase or download from say netflix, it cannot.

WRTG54S Connect to network but not internet

I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell running Vista) It sat in a box for about 6 months and now that I have a new one (Sony running 7) I can connect to my network but not the internet. I have upgraded the firmware from 7.6 to 7.8 with no change. I have tried no security, wep, and wap with no change. I also cloned the MAC, again no change. Windows cannot detect any problems and when I try to enable the router to connect to the internet it always says connection failed. I can connect when directly wired to the modem but not when wired to the router or wirelessly. Any ideas? Thanks
Solved!
Go to Solution.

Wire your computer directly to your modem, open a command prompt window and enter "ipconfig /all". Post the full output. That will show what kind of modem you have and what the best configuration for your WRT should be.

Airport card 802.11b sees other networks but NOT my network!

Hi. Having a very strange tech issue today...
I have a 1ghz ti-book that no longer wants to connect or even SEE my home network after waking up from sleep. Up until today there has never been an issue. My home network is distributed via a Netgear 802.11b and g wireless router. Again, I have never ever had any issue whatsoever connecting to my network. WEP is enabled. There are also 6 other computers all connecting to the same network via wireless too. No problems.
The crazy thing is I know the card is still functioning properly because I can still see all the other available networks around in my area. Even when I place the ti-book RIGHT NEXT to the antenna on the netgear router, it refuses to acknowledge that it is there. Meanwhile, it is showing all of my neighbors networks just fine!
The only variable in this equation is that the hinge of the display is damaged, such that it won't stay open "by itself". The display normally has to be propped up against something. The machine works fine otherwise, no issues. The weak bezel breaking is an issue that many ti-book owners faced and it has been broken for a LONG time with no performance issues at all. The only thing I can think of is that maybe the wire to the antenna for the Airport card goes up the side of the display and somehow the wire is damaged or frayed. I don't know if this is how the ti-book was designed....does anyone know? Specifically, if the wire for the airport card runs along inside the case of the display on the 15 inch 1ghz ti-book?
If it does not...and it seems like it is not hardware damage to the cable because how else could I still be getting other networks but not my own...then I am stumped as to how to trick my machine into recognizing the network again. I have done the basic things such as booting into single user mode and rebuilding my index, logging in as root and other users to see if the preferences were corrupt, and even installing a bunch of wifi wardriving apps to force recognition of my network and still nothing!
Again the machine is right next to the access point, so what is causing it to no longer "see" it? I also updated the firmware in the router and checked configurations but no changes have been made and all the other machines work fine. Also it has NEVER done this before so I don't know how to troubleshoot it!
*What would cause an airport card to reject the signal that it is configured to connect to? How should I go about getting it to see the network again...without reconfiguring the network which would mean having to update all the other machines, etc.* I have macstumbler and istumble running and they see PLENTY of networks except for the closest one. It is so bizarre. It was working when I went to bed and now today, no network. I have rebooted numerous times, etc.
please help!! i need some ideas!!!
thanks!

a somewhat in depth search across the interwebs has lead me to the conclusion that this problem is also affecting Leopard users as well. (I am on old hardware and running the latest Tiger) To be honest, I can not remember if there was an Apple update right before this problem started to happen. However, it seems real enough and many users out there are having problems re-connecting to their home/work networks after waking from sleep.
just to clarify:
Using a ti-book with normal airport card installed (b not g)
Connected to a Netgear wireless router (configured to manage both b and g traffic)
WEP 64bit encryption key is being used for network
No problems whatsoever until a few days ago
what works:
unplugging the power to the Netgear router (cycling power)
what doesn't work:
waking from sleep
restarting
manually entering network name and password
using 3rd party apps to find network
resetting/deleting Network location preferences and creating new one
deleting AppleAirPort2.kext from /System/Library/Extensions/
using either Diagnostic or Assistant mode to reconnect from scratch
it should NOT be this difficult to solve a networking issue. what is going on here?

My PC is connected to my airport by Ethernet. I can connect to the network, but not the internet. My wireless devices can access the internet

My PC is connected to AirPort Extreme by ethernet, I can access the network, but not the internet. The wireless devices on the extreme can access the internet

Hey DM,
Is the Wireless(WL) router signal coming through the wired-router?
My ISP requires that my Wireless Router is identified from their end. I use AirPort Express, so they need its MAC address from the router. Without that, my network will show up, but my ISP doesn't recognize it and won't allow it to route he internet. I don't know your exact situation though.
Can other wireless computers access the internet? If they can through the WL router, then it might be the MacBook. If they can't, then you might want to contact your ISP and ask if they can see your wireless router?
Let us know.
Adam

WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

Hi,
WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

The answer to your question is - neither!
Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

Can Management Studio connect to a server that is on the same network but not on the same domain?

Should management studio be able to connect to an instance of an sql server that is on the same network but not on the same domain? I am trying to have it do so but am unsuccessful, so to continue to troubleshoot what the issue might be I need to know
whether I am embarking on an exercise in futility.

Hello,
That's your issue!
Since you're attempting to use Windows Authentication you'll need to start the SSMS process under the domain credentials of the domain account that has access to that SQL Server. Otherwise windows is going to send you local user token which is going to quickly
be rejected as your local computer user account is not the correct domain account.
You can do this by either using shift+right-click run as different user or from the command line using RunAs /user.
In either case, if you want to use Windows Authentication you'll need to run the SSMS process as that domain user so that you can pass a valid security token.
Edit:
I read that backwards... If it's not on any domain (or member of a workgroup) you'll have a really hard time in using windows authentication as you're limited to LOCAL users on that machine. Thus you could really only use windows auth if you were logged
in locally on that server. I'd either setup a SQL Login for this or join it to a domain.
Sean Gallardy | Blog |
Twitter

Airport Express I can connect to my wireless network but not the internet.

The computer I set up my Airport express on works fine. But my other laptop in my house connects to the network but not internet. Why is this?

i was having the same issue with all my devices. everything would cut out and i would have to reboot my router...my internet service provider is ATT and i have a Uverse router. i went to their online support and i was able to chat with a tech support agent and they ended up changing the channel of my router and that has resolved my problem....i am currently steaming pics from my iphoto library to my apple tv and my wife is streaming music from her iphone at the same time...support tech stated that usually they have the router set to a generic channel that usually has a lot of traffic.

I can connect to my wireless network but not the internet

Hi. I've had my iBook G4 for just about a year and it's worked fantastically... until recently. My roommate has a PC and a linksys wireless router, and I've always been able to connect wirelessly to the internet until last week. I came home from work one day, and my iBook "saw" our wireless network and could "see" other computers on the network, but could not access the internet. My roommate had no problem accessing the internet through the wi-fi on his Dell laptop. So I zapped my p-ram and fiddled with some settings, but I still had the same problem.
Next I re-installed OS X, and tried again. Still the same issue. Of course, by this time I'm getting frustrated, but then about 12 hours later I decide to try it again and it just works! Like there was never any problem....
So anyway, it worked like a dream for about a week and now I have the same exact problem again! It connects to the network but not the internet. Is this a known problem? Any help would be GREATLY appreciated.
Thanks,
-joe.
iBook G4, 1.2 ghz Mac OS X (10.3.9) 256mb, combo drive

i was having the same issue with all my devices. everything would cut out and i would have to reboot my router...my internet service provider is ATT and i have a Uverse router. i went to their online support and i was able to chat with a tech support agent and they ended up changing the channel of my router and that has resolved my problem....i am currently steaming pics from my iphoto library to my apple tv and my wife is streaming music from her iphone at the same time...support tech stated that usually they have the router set to a generic channel that usually has a lot of traffic.

My macbook pro shows some wifi networks, but not mine. i dont know whats wrong, the wifi networks works on my phone as well as other laptops.

my macbook pro shows some wifi networks but not mine. it comes up on other computers as well as my phone but will not show up on my wifi network options.

Direct you to the proper forum for MacBook :
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

[SOLVED] Puzzled: Web site visible on network but not outside network

Edit: Ok, nevermind . . . somehow the problem has resolved itself. Perhaps my ISP was having a bad hair day or something.
I'm puzzled by this small problem I'm having. It is NOT a critical problem or anything, just something I'd like to solve.
I've installed the LAMP packages, set up a small MySQL database and made a very simple web interface for it. The web pages open fine on my main computer and all the other computers on our network, but it is not visible outside our network.
I am behind a router and I have forwarded port 80 to my local IP. I've set httpd: ALL, http: ALL and (finally) ALL: ALL: ACCEPT in /etc/hosts.
I got to thinking maybe my ISP (RoadRunner) is blocking port 80 requests to my home, so I changed the port to 9292 and forwarded that to my local IP. Still not visible from the outside.
I've tinkered with the /etc/httpd/conf/httpd.conf file (pasted in below) but still there is no outside connectivity, changing the listen settings and the server name settings. I can still access it fine from this side of the router. I've restarted the httpd service many times.
I've done all I can think to do to solve the issue. it is likely I am overlooking something very basic. Any help or ideas are appreciated. Below is my httpd.conf.
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 192.168.1.100:9292
#Listen *:9292
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
LoadModule php5_module /usr/lib/httpd/modules/libphp5.so
AddHandler php5-script php
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
ServerName 192.168.1.100:9292
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
Include conf/extra/php5_module.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Last edited by Rumor (2009-01-29 15:04:27)

You could try a factory reset of the home hub, as sometimes the config can get corrupted.
There is some general help on this page.
Help with setting up routers, wireless repeaters, TVs and printers, CCTV cameras, VOIP Phones
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Weird: Backup file works fine from the network but not when moved into sandbox environment

We have a valid full backup of a database. We know it is valid, we have restored it twice from the network with no problems, but we do not have access to the network location from our sandbox environment.
The .bak file is sizable at about 9GB. The .bak file resides on our internal network, in a SAN drive. No problems there. When we copy the file from there into a sandbox environment to attempt the restore in the sandbox environment it gets corrupted. We've
tried three different times and all three different times it gets corrupted. First time we copied the file over to the sandbox the restore went up to 50% and failed. The second time we copied the file again and attempted the restore again it failed at 70%.
The third time it failed at 60%. The error message we get during the restore is "...Read on ... failed: 13(The data is invalid) Msg 3013, Level 16, State 1, Line 1 Restore database is terminating abnormally."
Now some background here. To move the file our network team is doing this: they have this .vmdk file that they mount out in our production environment (which has access to the network location where the .bak file is), copy the file into the drive, then move
the .vmdk file into the sandbox environment(which does not have access to the network location), mount the drive in the sandbox environment, and then I have access to the .bak file from within the sandbox environment.
Something in the process of using the .vmdk file to move the .bak file from production into the sandbox is causing the file to get corrupted.
Any thoughts? Has anyone seen this before? Any idea? TIA,
Raphael
rferreira

Original server that generated the .bak file:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64)
Jun 11 2012 16:41:53
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server where I CAN restore the .bak file from the network location (not inside the sandbox):
Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server inside the sandbox where I get the error when attempting to restore the backup:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64) Jun 11 2012 16:41:53 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
rferreira

Access AFP, email, Remote Desktop via VPN and local network but NOT web

How can I do this? Right now I can set up all these services where I can access them via VPN only, but not on the local network or via the web. If I want to access them via the local network I have to open up the ports in the firewall, however this opens up access via the web (not requiring VPN) which I do NOT want. How do I remedy this?

How can I do this? Right now I can set up all these services where I can access them via VPN only, but not on the local network or via the web. If I want to access them via the local network I have to open up the ports in the firewall, however this opens up access via the web (not requiring VPN) which I do NOT want. How do I remedy this?

HP Officejet Pro 8600 - Printer is on Network but not Discoverable with Typical Discovery Method

Hi all.
I need help! I have fought with this printer (HP Officejet Pro 8600) for about an hour. The error message I get says that the printer is on my network but is not discoverable using the typical network discovery method. I can set it up using the IP address (and will), but we frequently reset the router, and I don't want to deal with the printer everytime I do this. I figured it was something with the Windows firewall. I temporarily disabled it and tried again - nothing different. I am also running AVG free edition, but it does not have a firewall. Any help is appreciated! Forgot to add... I'm running Windows 7.

Hi Kelly,
The printer should be able to reconnect to the router by itself after the router is reset. Why do you have to reset the router? It might be part of the issue with the printer.
There are multiple ways for the software to discover the printer. There could be a setting in the router or even software services in the computer that are causing the normal methods to not work.
After you reset the router, does the printer not reconnect? The blue wireless light would continually blink if the printer cannot reconnect to the router after the reset.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

C7 catching 2G network but not catching 3G/3.5G ne...

Similar Messages

Maybe you are looking for