C7 compatibility with FIAT Punto Evo BLUE&ME

Hi everyone.
does anyone know if NOKIA c7 is compatible with PUNTO EVO FIAT and its system BLUE&ME?
thx 4 reply

the problem is that the list is up to date at 1 october 2010.
i was trying to find someone who tried C7 with Blue&me.
sometimes phone that are not in the list are full compatible with blue&me...this is because list is not updated

Similar Messages

MSI GX660R with intel motherboard and compatibility with Samsung 840 EVO SSD

Hi
Im am new to this forum, so I apologize in advance if this post is in the wrong section.
I am considering to replace the hard drive in my MSI GX660R with a Samsung 840 EVO 250 gb ssd, since it has the best benchmark ratings and are very afordable. My laptop has an Intel motherboard with an i7 core processor.
My question in relation to the upgrade is, whether the laptop is compatible with that excact ssd. I plan to run it in AHCI mode, since I have bad expirience with loss of data under RAID. If i chose to run the extra HDD as a secondary drive, it will therefore still be under AHCI.
Can anyone refer me to some sort of compatibility list, or tell me if the above mentioned drive is compatible? I havent been able to find out myself, and MSI is farily difficult to get in contact with.
Any help is appreciated.

Yes, your early 2013 Retina model uses 6.0 Gbps SATA but it's not a standard mSATA connection. You could upgrade using Transcend's JetFlash -> http://www.transcend-info.com/apple/jetdrive/ - to space up to 960GB, however.
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Blue Ray Disk drive compatibility with DVD S Pro, Mac Pro

Ok, I'll make this an official question, where might I find info on BDR drive compatibility with DVD S Pro, Mac Pro, etc? I'm a little surprised that there doesn't seem to be much info available.
I can always use my Pioneer BDR-202 with a windows box, I have several, but I'm trying to get AWAY from them.
Any thoughts, links, etc. welcome, thanks
Les

Blu-ray offers a level of interacivity that is not possible with DVDs, so it isn't just an different drive that you are getting with Blu-ray. Seeing how Apple didn't upgrade DVD SP with the new FCP Suite 2, it is reasonable to assume they are working on a separate Blu-Ray Studio Pro, that is going to be completely different than DVD SP. Adobe Encore's support for Blu-Ray is extremely buggy, so obviously moving from DVD programming to Blu-Ray programming isn't just a simple tweak to the code.
Apple doesn't pre-announce software they are working on so this is all guess work, but it is reasonable to assume that they are working on a Blu-Ray programming application. Be patient. Do you really have the money to burn on the bleeding edge of new technology? A single Blu-Ray burnable disc sells for $20. Two months ago the exact same disc sold for $45. Prices will continue to fall as things stablize.

After updated ios4.1, I can't pairing with Fiat Blue&me

Everything was working fine until I updated iOS4.1 couple days ago. My iphone stop working with Fiat Blue&me.. It's won't see Blue&me device...
I shouldn't updated it
Can anyone help plz!!!!! T_T

You're going to have to restore your iPad on your computer via iTunes. Make sure you have the latest version of iTunes on your computer (11.1) click help and check for downloads. Then connect your iPad to your computer via USB and follow the directions in the link I have provided:
http://support.apple.com/kb/ht1212

Blu-ray compatibility with Panasonic DMP-BD60

I made a blu-ray disk from Encore CS4 with my internal Pioneer blu-ray burner using Power DVD9 and it played back fine with this burner. But when played through the Panasonic which is connect with HDMI to Denon receiver to HD TV it stops and starts intermittently throughout the sequence. What is really strange is before I upgraded to Win 7 Ultimate had Vistainstalled and at that time tested a Blu-ray disk and it worked fine. Only diifferences between the two is a few page curls and audio fade in /out. I updated the firmware on Panasonic, but did not make a difference. I used Shintaro blu- ray REfor both. DVD disks work fine on both. Could it be if I did my transcoding before I made an Encore project. I used dynamic links this time without transcoding first.
Any ideas Please

You are most correct, a lot of consumers are going to take it out of the box and use it, and not know or care about firmware updates. Eventually the problem will be sorted out by manufacturers (indeed I think it mostly already has, most if not all of the new release blu-ray players now support BD-R), this is just the same case when DVD players started getting big, some did not support DVD-Rs or RWs, etc. but most do now. I suppose the solution now would be to set up an email address (thats included in the BD-R packaging) and if people have trouble address them individually by email and inform them of firmware updates.
All blu-rays that we've released have a CYA statement about firmware updates and a link to the Sony site. If we have several major clients who can't seem to figure it out, have them email their model numbers and ship them a DVD with the update on it with instructions how to use it. I suppose a fee could/should be charged for that.
Hopefully we'll be out of this awkward phase soon....but only time will tell.

Windows logo testing to verify compatibility with 80GB Classic Problem

Hi All,
I purchased my son a 80GB Classic for christmas and it has been great. Then out of the blue when he hooked it up to his computer two weeks ago to purchase new music the computer would not recognize it. I have tried the five R's as recommended and updated all his programs as suggested. Any advice would be Greatly appreciated. This is the message we get when we plug the ipod into the usb " The software you are installing for hardware has not passed Windows Logo testing to verify its compatibility with Windows XP." Thank you!

Since I'm on a Mac, I can't offer a whole lot of help. I did find this article on the Microsoft website which may be helpful.
http://support.microsoft.com/kb/293765

Is eSATA compatable with SATA2 drives?

I have pavilion dv3000 laptop with eSATA port. Have run SATA external drives successfully.
I purchased larger SATA 2 drive (1.5TB) for backup data and computer will not recognise the drive using eSATA connection yet it does when I connect via USB. I want to use SATA connection because of speed advantage.
Is the eSATA port compatable with SATA2? If not, whats a fix?
Peter

Try partitioning your external 1.5 TB hard drive to something smaller than 1 TB (maybe two equal partitions). Your system may have a size limitation on the sata HD size.
I use an esata external enclosure containing a sata drive and I connect it to an internal sata port that I extended to the back of my PC. I can also use this device with the esata ports on my PC. It work both ways for me. Also works with USB since my enclosure has both port types. I see about 70 MBps using my 7200 rpm external HD. Almost twice that of USB2.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Bluetooth IP5 on fiat punto´s hand set

Hi, everybody, i have an iphone 5, and the bluetooth don´t working with the hand set of my car. My car is a FIAT PUNTO 2013.--
I need a solution.. ideas????

Problem solved. Found it ina previous post
Press the reset/power button and hold key for over 10 seconds.

What logic boards are compatable with macbook pro mid 2010

i'm just curious about what logic boards are compatable with my macbook pro mid 2010? didn't know if i needed to stay within the same year or if there are others that would work with mid 2010 layout inside the casing. right now i have 2.4 GHz Intel Core 2 Duo and NVIDIA GeForce 320M 256 MB and really looking to upgrade this if i can find one online from a mac with a broken screen or some defect with the logic board intact.

Rather than the Samsung EVO, I would get a Crucial M500 series - http://www.amazon.co.uk/Crucial-960GB-Solid-State-Drive/dp/B00BQ8RGL6/ref=pd_sim _computers_5 - they just seem to 'play well' with Macs where some people have reported problems with Macs and the EVO series.
Good luck,
Clinton

Windows 8 and itunes 11 compatibility with an ipod

I have itunes11 and Windows 8. I've called Apple and I've talked to Microsoft. This was months ago. I can download itunes and run it from my laptop but am unable to sync my ipod. I get an error and it automatically reboots my computer. I was told there were known compatibility with itunes and Windows 8. This was months ago.
I know how to downgrade itunes to XP or Win 7. This is not the issue. I can download to my laptop and place, it will not sync to my ipod device (which is a fear years old), but when I did talk to support I was told that it was supported. The ipod was not the issue.. It was the incompatibility between the programs.
I see recent updates in the support community in the past month about production resolution but this still has not resolved my issue. I don't believe purchasing a new ipod is going to resolve the issue either.
If anyone has successfully developed a workaround or recently downloaded itunes11 w/ Windows 8 and can sync to an apple ipod I would love to know how you did it.
Kia
[email protected]

Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

Is adobe photoshop cs2 compatable with windows 8?

Is adobe photoshop CS2 compatable with windows 8?

I have removed and re-installed CS2 twice now and still get the same library application error.
DO NOT INSTALL WINDOWS 8 ONTO YOUR COMPUTER IF YOU WANT TO KEEP CS2!
Telling us to spend more money to upgrade our software to meet OS does not show trust to the users. CS2 should be able to work with new OS systems and if not users should be allowed to update their current program for free to be able to use it on the new OS.
Thank you,
Eric

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

I have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?

i have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?
i had the facebook app but i could never upgrade it and i was ok with using the outdated version but when i reset the ipod so i could gift it to a friend it obviously got rid of the app and now i cant downloaded because it says its not compatable, how can i download the version i had before i reset it?

Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

Itunes 9.1 not compatable with XP?

Tried to download 9.1 and keep getting error message that says: The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. Continuing installation of this software may impair or destabilize operation of your system either immediately or in the future.
I have reboot computer several times, etc. Have never had a problem with any updates to itunes or iphone till now.
Thoughts?

Itunes 9.1 is definitely NOT compatible with Windows XP at this time. The culprit appears to be the Bonjour services package. I recently attempted to install via 3 methods: through Apple Update, via direct download over wireless and via direct download over wired connection. The result was the same in all three instances: when attempting to start itunes 9.1, it would immediately crash with a message "Itunes has encountered a problem and needs to close...". Upon checking the application event viewer (control panel > performance & maintenance > administrative tools > event viewer) I was able to determine that the itunes crashes were due to Bonjour in all but one instance. Bottom line: steer clear of itunes 9.1 until Apple gets their comparability issues corrected.

HELP printer compatability with computor.

Help...Have hp psc 1310 hp officejet 4200 series......Got a new gateway which is Vista and my old one was XP......my printer will print, but can not scan and tried to program the cd in again and computor would not accept it. Will I need to get a new printer that is compatable with Vista? Any thing to update of just have to get new?
thanks enhelder
Message Edited by enhelder on 07-07-2009 10:51 AM

Hello Highcountryhike,
Thank you for posting your request. You should have no issues updating to 10.10 Yosemite. Below are a couple links that should help.
If you run the Software Updates from the Apple Menu, to check for updates. Some have had issues not seeing updates, so simply click on "Store" from the top menu, and then click on Reload Page". Select to install HP Updates to ensure you have the latest drivers.
In some instances, the printer can be updated in the printer queue to resolve other issues, so check to make sure that the printer is listed with the HP Printer Series driver and not just AirPrint. System Prefernces/Printers & Scanners/ select your printer on the left and check on the right side under "Location:" that Kind: is the printer series. You can also click the "-" symbol to remove and then re-add the printer queue again, choosing the HP Printer series name to install the drivers.
Installing the Full Feature HP Printer Driver in OS X v10.10 Yosemite
Mac OS 10.10 Yosemite and HP Printer Support
Please post back with any further issues/questions.
Thanks,
Double-U-Dee
Don't forget to give Kudos where Kudos is Due - OR - if a Response Resolved your Issue, Click the "Accept as Solution"
I am an HP employee, but my posts and replies are my own and do not reflect the opinion of HP.

C7 compatibility with FIAT Punto Evo BLUE&ME

Similar Messages

Maybe you are looking for