C7 | Connection Failed - Access Denied - Invalid S...
Hi,
Whenever I am trying to connect to WLAN, it got connected but the moment I start browsing, it displays message 'Connection Failed - Access Denied'. Sometimes, it shows 'Invalid Server'. I am really not sure why it is happening as 3G is working fine in my phone.
If someone can help me to understand the problem and resolution to it.
Thanks-
Amit
Hey Amitbbb, Welcome to the Nokia Forums!
The apps SPB Wireless Monitor Lite and SPB Wireless Monitor may be preventing your phone from accessing the internet, if they have been downloaded to your phone before the Nokia Belle update. If possible, please uninstall these apps before updating to Nokia Belle.
If you are experiencing data connection problems after the Nokia Belle update, then please check if you had downloaded either of these apps earlier on your phone by browsing via your PC to Nokia Store: www.nokia.com/store > My stuff. If you can see either of these apps, then first try fix the problem by redownloading these apps on your phone:
Connect your phone with a USB cable to PC and ensure that you have Nokia Suite running.
In Nokia Store, select the name of these apps under My stuff and then select Download >Download on PC.
After the apps have been redownloaded, please reboot your phone and verify that you are able to browse the internet on your phone for example by opening www.nokia.com in your phone’s browser.
If you still get the same error message or if you not able to re-install these apps from Nokia Store for some reason, only then follow the remaining steps to manually disable these apps:
Close Nokia Suite via File > Exit.
Connect your phone to computer with a USB cable in mass storage mode. You can set this in the Notification bar via USB > Mass storage on your device.
Open Windows Explorer on your computer and open your phone’s mass memory drive (typically named Nokia Ovi Suite).
Go to folder private\101f7989\esock\ and delete following file if it exists: ip.wrlmonsnf_20042D1F.esk.
Close Windows Explorer, and unplug the USB cable after using the safely remove hardware and reject media function on PC.
Reboot your phone.
Verify that you are able to browse Internet on your phone.
If you want to reinstall SPB Wireless monitor, go to Nokia store to redownload it.
I hope this helps and that you manage to resolve your issue!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!
Similar Messages
-
N8 Belle connection failed- access denied. NO INTE...
After the Belle update I have a problem with my internet connections. Both WiFi and mobile internet are not working at all. At first it was ok but after a while or a reboot of the device I simply cannot connect to any wifi wether it's a known one or an open one. I always get an box message on the top of the screen that says
"Connection failed
Access denied"
There's nothing I can do about it! I tried reinstalling Belle and it was ok at first but shortly the problem occurred. So I have a phone with NO INTERNET CONNECTION at all!!! It's almost useless.
I would like a nokia support response please. This is a huge problem!
Solved!
Go to Solution.Posts: 3
Re: N8 Belle connection failed- access denied. NO INTERNET![ Edited ]
19-Feb-2012 11:12 AM - last edited on 19-Feb-2012 11:30 AM
Hi Torben
Thank you for contacting Nokia Care customer support.
Since we wrote last I have got a lot more experience with the Belles situation in this area.
Recently suspicion fell on a bug in old saved data from the "Anna" that causes general network error.
To solve it, there must be a backup - but NOT the programs / settings, since they bear the error.
Subsequently, disconnect the phone from, select the Offline profile (Press and hold the cards on the off button and choose the one on this list)
"Ring" now * # 7370 # accept and enter the security code is 12345, if it asks for it.
Your security code if you have change it.
Set Time & Date and reviewing start-up menus.
Get immediately sent to the settings for data and multimedia.
Restart your phone and try now about the Internet is working properly.
Do they do it; you can safely restore contacts and whatever else you have in your backup.
I would personally appreciate it if you want to participate in a brief survey that will be about my response to you. Customer survey will receive a separate e-mail.
If there is anything I can do for you, then you're obviously more than welcome to contact me again.
Sincerely
Jannik Petersen
Nokia Care
Thanks, these steps resolved my Connectivity issues -
Mifi 2200 - Error 691: Connection Failed - Access was denied ...
I have set up a Mifi 2200. It CAN work great. Intermittently though, I can't get connected wheen using the device as a USB modem. It will ALWAYS connect fine when I connect through Wifi.
The error I get: Mifi 2200 - Error 691: Connection Failed - Access was denied because the username and/or password was invalid in the domain.
I have done all the usual things:
1. Reinstalled the VZAccess Manager software including latest update. I am at 7.3.13.1 (2635a)
2. Obtained all latest Windows updates (XP SP2).
3. Removed, replaced, manually, auto-configured a Dial Up Connection many times.
4. Replaced the USB to microUSB cable.
I found the VZAccess Managers diagnostic tool where you press CTRL-D and enter the password diagvzw and see some additional settings.
There I had a minor break through. There is a setting where I can force the modem to only use 1X. If I do that, I connect every time without fail. No problems, no errors. The moment I put that setting back to Auto or forced EVDO, I fail again, or only work every 20th try or so after a reboot of the device etc.
Is anyone else seeing this, or getting this error? It can't be an account issue since it works sometimes on EVDO and ALWAYS fine on 1X.
Thanks for any help or ideas.
PNI think I have an update that might be a clue that it IS an Verizon issue either with the device itself or at the towers.
I have determined that when I connect to it through WiFi where I mentioned it seems to ALWAYS work. Well, it always works in 1X mode there. It fails in EVDO mode.
Something up at the towers? Although multiple towers have been tried.
Anyone any ideas? -
Opening device /dev/sg3 failed - access denied to /dev/sg* device file
Opening device /dev/sg3 failed - access denied to /dev/sg* device file (OB scsi device driver)
Got this message when running an automated RMAN job.
To my knowledge the only thing that has changed since being able to run RMAN jobs with OSB and not being able to run them is that the permissions on /usr/tmp were changed from drwxr-xr-x, not drwxrwxrwx.
Transcript below:
2010/01/27.04:03:20 ______________________________________________________________________
2010/01/27.04:03:20
2010/01/27.04:03:20 Transcript for job oracle/6142.1 running on backup01
2010/01/27.04:03:20
2010/01/27.04:03:20 (amh) qdv__automount_in_mh tape1 at 2010/01/27.04:03:20, flags 0x100
2010/01/27.04:03:20 (amh) mount volume options list contains:
2010/01/27.04:03:20 (amh) vtype 3, vid (null), vs_create 0, family PAS-RMAN, retain (null), size 0, scratch 0
2010/01/27.04:03:21 (amh) don't preserve previous mh automount state
2010/01/27.04:03:21 (amh) loaded volume has no barcode
2010/01/27.04:03:22 (amh) beginning pass 1
2010/01/27.04:03:22 (mmr) volset containing oid 20859 (vid PASWLY-000215, tag 000086L3) is closed
2010/01/27.04:03:22 (amh) 1 oid 20859 doesn't meet mount requirements - volume set is closed to further update (OB device mgr)
2010/01/27.04:03:22 (mmr) need next volume after oid 20543 (vid PAS-RMAN-018887, tag 000048L3) for append; its oid 20604
2010/01/27.04:03:22 (amh) 2 oid 20543 doesn't meet mount requirements - the next volume of this set is needed (OB device mgr)
2010/01/27.04:03:22 (mmr) oid 20949 (vid PAS-RMAN-018935, tag 000021L3) passes criteria
2010/01/27.04:03:22 (amh) 3 loading
2010/01/27.04:04:04 (mt) qdv__read_label() succeeded; read 65536 bytes
2010/01/27.04:04:05 (atv) automount worked
2010/01/27.04:04:05 (amh) 3 automount worked - returning
2010/01/27.04:04:05 (amh) end of automount at 2010/01/27.04:04:05 (0x0)
2010/01/27.04:04:05 Info: volume in tape1 is usable for this operation.
2010/01/27.04:04:05 (pvfw) at BOT
2010/01/27.04:04:05 (pvfw) previous state is invalid
2010/01/27.04:04:05 (alv) backup image label is valid, file 1, section 1
2010/01/27.04:04:05 (pvfw) invalidating tape position in mount db
2010/01/27.04:04:05 (ial) invalidate backup image label (was valid)
2010/01/27.04:05:17 (pvfw) space to EOD
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [0] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [1] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [2] = data
2010/01/27.04:05:26 (pvfw) inspect_recs BSR: rtypes [3] = filemark
2010/01/27.04:05:26 (pvfw) inspect_recs FSF
2010/01/27.04:05:26 (pvfw) inspect_recs ready to mount
2010/01/27.04:05:26 (pvfw) mounting at inspect_rec's request in rw_mode 2
2010/01/27.04:05:28 (pvfw) mounted ok
2010/01/27.04:05:28 (pvfw) at OB EOD, returning (2)
2010/01/27.04:05:28 (pvfw) pos_vol_cleanup not returning pstate
2010/01/27.04:05:28 (dmap) tape1 success
04:05:28 OBTR: obtar version 10.2.0.3.0 (linuxamd64) -- Wed Sep 24 11:12:44 PDT 2008
Copyright (c) 1992, 2007, Oracle. All rights reserved.
04:05:28 OBTR: obtar -c -Xjob:oracle/6142.1 -Xob:10.2 -Xstat -X shm:/usr/tmp/obsbt_10985_0_126458300010985a -Xbga:oracle/6142.1 -y /usr/tmp/[email protected] -J -F5 -f tape1 -Xrescookie:0x99ECC895 -H backup01 -zR
04:05:28 OBTR: running as root/root
04:05:28 OBTR: record storage set to internal memory
04:05:28 ATAL: reserved drive tape1, cookie 0x99ECC895
04:05:28 OBTR: obsd=1, is_job=1, is_priv=0, os=15
04:05:28 OBTR: rights established for user oracle, class admin
04:05:28 SUUI: user info oracle/oinstall, ??/??
04:05:28 STTY: background terminal I/O or is a tty
04:05:28 MAIN: interactive
04:05:28 SET: volume has no expiration time
04:05:28 CNPC: data host reports this butype_info:
04:05:28 CNPC: tar (attr 0x2C78: B_DIRECT, R_DIRECT, B_INCR, R_INCR, B_FH_DIR)
04:05:28 CNPC: DIRECT = y
04:05:28 CNPC: HISTORY = y
04:05:28 CNPC: LEVEL = 0
04:05:29 DOLM: nop (for tape1 (raw device "/dev/sg3"))
04:05:29 DOLM: ok
04:05:30 RLE: connecting to volume/archive database host
04:05:30 RLE: device tape1 (raw device "/dev/sg3")
04:05:30 RLE: mount_info is valid
04:05:30 A_O: tape device is local
04:05:30 A_O: Devname: HP,Ultrium 3-SCSI,G63Z
04:05:30 Info version: 11
04:05:30 WS version: 10.2
04:05:30 Driver version: 10.2
04:05:30 Max DMA: 2097152
04:05:30 Blocksize in use: 65536
04:05:30 Query frequency: 134217728
04:05:30 Rewind on close: false
04:05:30 Can compress: true
04:05:30 Compression enabled: true
04:05:30 8200 media: false
04:05:30 Error threshold: 8%
04:05:30 Remaining tape: 403359744
04:05:30 A_GB: ar_block at 0x2B544951A000, size=2097152
04:05:30 A_GB: ar_block_enc at 0x2B544971E000, size=2097152
04:05:30 ADMS: reset library tape selection state
04:05:30 ADMS: reset complete
04:05:30 VLBR: not at bot: 0x9
04:05:30 VLBR: tag on label just read: "000021L3"
04:05:30 VLBR: master tag now "000021L3"
04:05:30 RLE: set kb remaining to 403359744
04:05:30 RLE: noticed nil label
04:05:30 ARVI: resetting volume id from nil to PAS-RMAN-018935
04:05:30 PF: here's the label at the current position:
Volume label:
Volume tag: 000021L3
Intro time: Tue Jun 02 17:00:51 2009
Volume UUID: d0e25812-ed54-102c-a34d-001143fd735c
Volume ID: PAS-RMAN-018935
Volume sequence: 1
Volume set owner: root
Volume set created: Tue Jan 26 23:32:25 2010
Media family: PAS-RMAN
Volume set expires: never; content manages reuse
Original UUID: d0e25812-ed54-102c-a34d-001143fd735c
Archive label:
File number: 5
File section: 1
Owner: root
Client host: merge01
Backup level: 0
S/w compression: no
Archive created: Wed Jan 27 00:08:56 2010
Marker: End of data
04:05:30 PF: at desired location
04:05:30 RCVW: volume "PAS-RMAN-018935" / vuuid d0e25812-ed54-102c-a34d-001143fd735c reserved for writing
04:05:30 CREA: tape position after open_archive() is 0001A1800000
04:05:30 GLMT: returning "000021L3", code = 0x0
04:05:30 IMF: inherited media family PAS-RMAN is content-managed
04:05:30 CREA: setting history tag to "000021L3" from volume label
04:05:30 RLE: overwrite invalid/blank/marker section
04:05:30 VLBW: on entry, l->tag = "", master tag = "000021L3", bot = 0
04:05:30 VLBW: setting voltag from "" to "000021L3"
04:05:30 VLBW: volume is content-managed
04:05:30 RLE: write volume PAS-RMAN-018935, file 5, section 1, vltime 1264566745, vowner root, voltag 000021L3
04:05:30 VSLW: set last write time for volume oid 20949
04:05:31 ULVI: set mh db volume id "PAS-RMAN-018935" (retid "000021L3"), volume oid 20949, code 0
04:05:31 ULTG: set mh db tag "000021L3" (retid "PAS-RMAN-018935"), volume oid 20949, code 0
04:05:31 RLE: set kb remaining to "invalid or unknown"
Volume label:
Volume tag: 000021L3
Intro time: Tue Jun 02 17:00:51 2009
Volume UUID: d0e25812-ed54-102c-a34d-001143fd735c
Volume ID: PAS-RMAN-018935
Volume sequence: 1
Volume set owner: root
Volume set created: Tue Jan 26 23:32:25 2010
Media family: PAS-RMAN
Volume set expires: never; content manages reuse
Original UUID: d0e25812-ed54-102c-a34d-001143fd735c
Archive label:
File number: 5
File section: 1
Owner: root
Client host: backup01
Backup level: 0
S/w compression: no
Archive created: Wed Jan 27 04:05:28 2010
Archive owner UUID: 9d92d00e-0368-102b-89f6-001143fd735c
Owner class UUID: edde6dc8-f857-102a-a357-001143fd735c
Backup piece name: 8sl4ft06_1_1
Backup db name: emrep
Backup db id: 3844670930
Backup copy number: not applicable
Backup content: archivelog
04:05:31 RCVW: volume "PAS-RMAN-018935" / vuuid d0e25812-ed54-102c-a34d-001143fd735c reserved for writing
04:05:31 ADMS: reset library tape selection state
04:05:31 ADMS: reset complete
04:05:31 SNP: using NDMP protocol version 4
04:05:36 FLDB: drive buffer flush to medium took 0:05 (min:sec)
04:05:36 BNPC: volume position "0001A181" added to s_vol_start_pos
04:05:36 BNPC: initial volume label "PAS-RMAN-018935" added to s_vids, s_last_section 1
04:05:36 BNPC: initial volume tag "000021L3" added to s_vtags, s_last_section 1
04:05:36 BNPC: environment variable DATA_BLOCK_SIZE = 64
04:05:36 BNPC: environment variable DATA_ARCH_UUID = f3ccd49e-ed7a-102c-be2b-001143fd735c
04:05:36 MGS: ms.record_size 65536, ms.record_num 0x0, ms.bytes_moved 0x0
04:05:36 SMWB: setting mover window for possible checkpoint during backup
04:05:36 MLIS: mover listen ok for local connection
04:05:36 APNI: a preferred network interface does not apply to this connection
04:05:36 DPNI: a local NDMP data connection is in use
04:05:36 BNPC: directing data service to connect to mover
04:05:42 BNPC: issuing NDMP_DATA_START_BACKUP
04:05:47 BNPC: started OSB NDMP backup of backup01 to tape1
04:16:51 MNPO: data service halted with reason=successful
04:16:51 SNPD: Data Service reported bytes processed 0x6DF20000
Opening device /dev/sg3 failed - access denied to /dev/sg* device file (OB scsi device driver)Permissions problem on the drive for the user running the job.
-
550 Access denied - Invalid HELO name
Can someone tell me if this error message is my problem or the recipients? 99% of our email goes through fine, but we now have 3 customers we get this error from. The email was sent from Snow Leopard Server 10.6.5. I did an MX check and MXToolbox reported back my ISP's IP address and not the static IP address of our server.
Return-Path: <MAILER-DAEMON>
Delivered-To: [email protected]
Received: by mail (Postfix)
id CBBB646C13E; Thu, 30 Dec 2010 11:26:53 -0600 (CST)
Date: Thu, 30 Dec 2010 11:26:53 -0600 (CST)
From: [email protected] (Mail Delivery System)
Subject: Undelivered Mail Returned to Sender
To: [email protected]
Auto-Submitted: auto-replied
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="4B5E246C13C.1293730013/mail"
Content-Transfer-Encoding: 7bit
Message-Id: <20101230172653.CBBB646C13E@mail>
This is a MIME-encapsulated message.
--4B5E246C13C.1293730013/mail
Content-Description: Notification
Content-Type: text/plain; charset=us-ascii
This is the mail system at host mail.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
The mail system
<[email protected]>: host THEIRSERVER.com[66.117.3.196] said: 550 Access denied -
Invalid HELO name (See RFC2821 4.1.1.1) (in reply to MAIL FROM command)
--4B5E246C13C.1293730013/mail
Content-Description: Delivery report
Content-Type: message/delivery-status
Reporting-MTA: dns; mail
X-Postfix-Queue-ID: 4B5E246C13C
X-Postfix-Sender: rfc822; [email protected]
Arrival-Date: Thu, 30 Dec 2010 11:26:51 -0600 (CST)
Final-Recipient: rfc822; [email protected]
Original-Recipient: rfc822;[email protected]
Action: failed
Status: 5.0.0
Remote-MTA: dns; THEIRSERVER.com
Diagnostic-Code: smtp; 550 Access denied - Invalid HELO name (See RFC2821
4.1.1.1)
--4B5E246C13C.1293730013/mail
Content-Description: Undelivered Message
Content-Type: message/rfc822
Content-Transfer-Encoding: 7bit
Received: from localhost (localhost [127.0.0.1])
by mail (Postfix) with ESMTP id 4B5E246C13C
for <[email protected]>; Thu, 30 Dec 2010 11:26:51 -0600 (CST)
X-Virus-Scanned: amavisd-new at MYSERVER.com
Received: from mail ([127.0.0.1])
by localhost (MYSERVER.com [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id XlYy8X32jZDY for <[email protected]>;
Thu, 30 Dec 2010 11:26:51 -0600 (CST)
Received: from [192.168.88.11] (mail.MYSERVER.com [96.226.0.23])
by mail (Postfix) with ESMTPSA id 3512046C135
for <[email protected]>; Thu, 30 Dec 2010 11:26:51 -0600 (CST)
From: Brian Jagielski <[email protected]>
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Subject: Test
Date: Thu, 30 Dec 2010 11:26:51 -0600
Message-Id: <[email protected]>
To: [email protected]
Mime-Version: 1.0 (Apple Message framework v1082)
X-Mailer: Apple Mail (2.1082)
--4B5E246C13C.1293730013/mail--Sorry. Was trying to be safe, but if it doesn't matter here it is
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
header_checks = pcre:/etc/postfix/customheaderchecks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 20971520
mydestination = $myhostname, localhost.$mydomain, mail.youngamericagroup.com, youngamericagroup.com, $mydomain
mydomain = youngamericagroup.com
mydomain_fallback = localhost
myhostname = mail
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpdclientrestrictions = permit_mynetworks permitsaslauthenticated permit
smtpdenforcetls = no
smtpdhelorequired = yes
smtpdhelorestrictions = permitsaslauthenticated permit_mynetworks rejectinvalid_helohostname rejectnon_fqdn_helohostname
smtpdpw_server_securityoptions = cram-md5,gssapi,login,plain
smtpdrecipientrestrictions = permitsaslauthenticated permit_mynetworks rejectunauthdestination permit
smtpdsasl_authenable = yes
smtpdtlsCAfile = /etc/certificates/youngamericagroup.com.EAC01934DECC18B36C5A42CBFED35A0C2C93C0E 5.chain.pem
smtpdtls_certfile = /etc/certificates/youngamericagroup.com.EAC01934DECC18B36C5A42CBFED35A0C2C93C0E 5.cert.pem
smtpdtls_excludeciphers = SSLv2, aNULL, ADH, eNULL
smtpdtls_keyfile = /etc/certificates/youngamericagroup.com.EAC01934DECC18B36C5A42CBFED35A0C2C93C0E 5.key.pem
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = yes
tlsrandomsource = dev:/dev/urandom
unknownlocal_recipient_rejectcode = 550
virtualaliasdomains = $virtualaliasmaps
virtualaliasmaps =
youngamericagroup:~ administrator$
Return-Path: <MAILER-DAEMON>
Delivered-To: [email protected]
Received: by mail (Postfix)
id CBBB646C13E; Thu, 30 Dec 2010 11:26:53 -0600 (CST)
Date: Thu, 30 Dec 2010 11:26:53 -0600 (CST)
From: [email protected] (Mail Delivery System)
Subject: Undelivered Mail Returned to Sender
To: [email protected]
Auto-Submitted: auto-replied
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="4B5E246C13C.1293730013/mail"
Content-Transfer-Encoding: 7bit
Message-Id: <20101230172653.CBBB646C13E@mail>
This is a MIME-encapsulated message.
--4B5E246C13C.1293730013/mail
Content-Description: Notification
Content-Type: text/plain; charset=us-ascii
This is the mail system at host mail.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
The mail system
<[email protected]>: host plaztex.com[66.117.3.196] said: 550 Access denied -
Invalid HELO name (See RFC2821 4.1.1.1) (in reply to MAIL FROM command)
--4B5E246C13C.1293730013/mail
Content-Description: Delivery report
Content-Type: message/delivery-status
Reporting-MTA: dns; mail
X-Postfix-Queue-ID: 4B5E246C13C
X-Postfix-Sender: rfc822; [email protected]
Arrival-Date: Thu, 30 Dec 2010 11:26:51 -0600 (CST)
Final-Recipient: rfc822; [email protected]
Original-Recipient: rfc822;[email protected]
Action: failed
Status: 5.0.0
Remote-MTA: dns; plaztex.com
Diagnostic-Code: smtp; 550 Access denied - Invalid HELO name (See RFC2821
4.1.1.1)
--4B5E246C13C.1293730013/mail
Content-Description: Undelivered Message
Content-Type: message/rfc822
Content-Transfer-Encoding: 7bit
Received: from localhost (localhost [127.0.0.1])
by mail (Postfix) with ESMTP id 4B5E246C13C
for <[email protected]>; Thu, 30 Dec 2010 11:26:51 -0600 (CST)
X-Virus-Scanned: amavisd-new at youngamericagroup.com
Received: from mail ([127.0.0.1])
by localhost (youngamericagroup.com [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id XlYy8X32jZDY for <[email protected]>;
Thu, 30 Dec 2010 11:26:51 -0600 (CST)
Received: from [192.168.88.11] (mail.youngamericagroup.com [96.226.0.23])
by mail (Postfix) with ESMTPSA id 3512046C135
for <[email protected]>; Thu, 30 Dec 2010 11:26:51 -0600 (CST)
From: Brian Jagielski <[email protected]>
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Subject: Test
Date: Thu, 30 Dec 2010 11:26:51 -0600
Message-Id: <[email protected]>
To: [email protected]
Mime-Version: 1.0 (Apple Message framework v1082)
X-Mailer: Apple Mail (2.1082)
--4B5E246C13C.1293730013/mail-- -
550 Access denied-invalid HELO name (See RFC2821 4.1.1.1.1)
Hello All
I am facing some problem while sending mail which is as:
I have developed a form for sending mail with attachment for this i am using smtp mail server. For this i get some help from OTN. It work well on XP Operating System but when it deployee on Window professional 2003 SP2 (server) then it give message as
Oracle.forms.demos.javamail.SendMessageException:
SendMessage: 550 Access denied-invalid HELO name (See RFC2821 4.1.1.1.1)
Please help me.
Thanks in Advance.Most likely the name service isn't properly configured on your Windows machine
and it can't get the correct host name for your machine. You can try working
around the problem by setting the mail.smtp.localhost property; see the javadocs
for the com.sun.mail.smtp package. -
Hi all,
We just recently installed SP1 for AQ6.0 and it has helped out alot. Fixed alot of our small issues, but seems to have brougt up a new one. Our Audit Log Management job is now failing every run. It is getting an Access denied error. Actually the error line is JobShell: Exception occurred when processing operation operation 0:103: \\ntapmd01\Plumtree5\PtAudit\audit 9-8-06 2.log (Access is denied). Running verbose dosen't help. I see that the job is running as owner Administrator and I am trying to copy the audit log to a shared network location, but this worked before. Nothing changed except for installing the SP. Any ideas?
BerneyFirst off, it seems like installing the patch reset the user account that ran the plumtree automation service. All I had to do was change the user who runs the automation service and that fixed it.
As far as service patch 1 goes we had alot of issues when we went to 6.0 with remote users opening documents. SSO redirect kept sending them back to the home page. We had issues with the Intrinsic Community Links portlet, protected excel files, along with some others I can't think of right now. Everything looked fine from the admin point of view, but users were going crazy. All of that went away with the service patch.
Thanks,
Berney -
ActiveSync 401 Access Denied, invalid user/password?
Hi everyone,
Just getting started on trying out Exchange Activesync and I'm having a few problems.
First, a little background:
Windows 2000 Server
Exchange 2003 with SP2
Global Settings , Mobile Service Properties:
* User Initiated synchronization
* up to date notifications via smtp and text messaging
* notifications to user specified smtp address
* direct push over https
* outlook mobile access
* unsupported devices
* all enabled *
All Exchange Features tab options enabled in 'nick' user account mobile services
Outlook Web Access works properly for everyone with a proper root CA SSL cert (thawte).
Treo 650 Sprint with Palm EAS upgrade and VersaMail 3.5.
Versamail set to Exchange ActiveSync, pointing to the external Exchange host, SSL checked.
I go to sync messages and it begins "receiving" a few times before erroring out telling me that my username/password isnt correct (which it is.. unless it's a formatting issue).
VersaMail responds with: There was a problem with syncing. The server did not recognize your username and/or password. Please check and try again.
Details include: AirSAMStateMachine.c 2214 5 HTTP/1.1 401 Access Denied Server: Microsoft-IIS/5.0 Date: Thu, 22 Mar 2007 21:44:16 GMT WWW-Authenticate:
It obviously does not appear to be an SSL problem (which is just about all I can find information online over), but rather an authentication issue.. but I know definitively that the username and password are correct.
I have tried entering the Username as follows based on random posts ive come across:
nick
domain\nick
domain/nick
/domain/nick
DOMAIN/nick
all of which fail with the same error.. I turn around and login to the OWA over SSL with a username of domain\nick and the same password, and it works fine.
Anyone have any idea what I'm missing here?
Post relates to: Treo 650 (Sprint)I'm also having this exact issue, did you find a resolution? Thanks in advance
-
Extraction failed access denied
Hi,
i have SQL Server express 2008 R2 running. Now i wanted to install advanced services like SSRS. So downloaded SQLEXPRADV_x86_ENU.exe file.
When i try to install the same I get error "Access Denied" during extraction of Autorun.inf file. I updated local security rights as advised in KB2000257. But still issue remains the same.
Please helpHi Ram,
Based on your description, the error might be caused by different factors. For example, your account has no permissions to extract the setup file, or firewall blocks the Autorun.inf file. There are some proposals for you troubleshooting this issue as follows.
1. As Shanky’s post, please make sure that your account has admin permissions, and choose ‘Run as administratror’ to complete the extraction.
2. If your account has admin permissions, turn off firewall and disable any third-party software such as antivirus software, then try to extract the setup file again and check if the error still occurs.
3. You can also extract the SQLEXPRADV_x86_ENU.exe file from command prompt. Navigate to the folder containing the SQLEXPRADV_x86_ENU.exe file, and type SQLEXPRADV_x86_ENU.exe /X, then you will get a window to specify the location where it needs to extract
the file, specify a different location and check if it is successful.
Thanks,
Lydia Zhang -
I have just been looking through a failure report on zenworks inventory,
it seems that I have approx 30% of all my workstations have failed to
install a small script, this has worked fine on all the rest of them.
All the workstations are xp pro and as far as I know the same service
pack.
When I look on failure advanced report it is telling me...... The
network path or Access is denied (most of them say access is denied)
Whats the problem?
Thanks
Total5Woo Hoo.... Cheers Shaun, try this
AXT_FILE 3.1
[Application Name]
Value=File and print sharing
[Application Caption]
Value=File and print sharing
[Application Path]
Value=\\Midzfd\DATA\IT\Applications\File_Printer\s netcfg.exe
[Application Flags]
Flag=Run Once
Flag=Force Reboot
Flag=Run As System User
Flag=Report Events
[Application Parameters]
Value=-v -l c:\windows\inf\netserv.inf -c s -i MS_Server
[Application Platform]
Flag=Windows 95
Flag=Windows NT
[Filter OS Version]
Type=Windows 95
Major Version=-1
Minor Version=-1
Revision Version=-1
Build Version=-1
Flag=Greater Than or Equal
[Filter OS Version]
Type=Windows NT
Major Version=-1
Minor Version=-1
Revision Version=-1
Build Version=-1
Flag=Greater Than or Equal
[Application Association Flags]
Flag=Force Run
[Application Report Output Flags]
[Application Report Event Flags]
[Application Version Number]
Value=5
[Application Report Event Flags For Log File]
[Application Report Event Flags For Database]
Flag=Distribute Success
Flag=Distribute Failure
Flag=Launch Success
Flag=Launch Failure
Flag=Terminate Process
[Application Report Event Flags For SNMP]
[Application Report Event Flags For XML]
Total5 -
BRARCHIVE from SAP failed: access denied
Hi!
I am facing with the problem that the online redo log backups from SAP endes with following error:
R0203I to
192.168.20.45\backup\abc\archive\abc...
R0278E Command output of 'E: && cd E:\oracle\abc\102\database && E:\usr\sap\abcSYS\exe\nuc\NTAMD64\brtools.exe -f copyfile
192.168.195.47\backup\gsr\archive\ABC initABC.ora s
ccess is denied.
0 file(s) copied.
R0280I BRARCHIVE time stamp: 2009-10-29 14.15.59
R0279E Return code from 'E: && cd E:\oracle\ABC\102\database && E:\usr\sap\GSR\SYS\exe\nuc\NTAMD64\brtools.exe -f copyfile
192.168.195.47\backup\gsr\archive\ABC initABC.ora sp
R0222E Copying init_ora to/from
192.168.20.45\backup\abc\archive\ABC failed due to previous errors
R0016I 0 offline redo log files processed, total size 0.000 MB
R0007I End of offline redo log processing: aebuhwjm.svd 2009-10-29 14.15.59
R0280I BRARCHIVE time stamp: 2009-10-29 14.15.59
R0005I BRARCHIVE terminated with errors
When I try from os-level with brarchive -c the redo log backup will be completed without any errors.
Any helpful information will be very appreciated!> I am facing with the problem that the online redo log backups from SAP endes with following error:
> R0203I to
192.168.20.45\backup\abc\archive\abc...
> R0278E Command output of 'E: && cd E:\oracle\abc\102\database && E:\usr\sap\abcSYS\exe\nuc\NTAMD64\brtools.exe -f copyfile
192.168.195.47\backup\gsr\archive\ABC initABC.ora s
> ccess is denied.
> When I try from os-level with brarchive -c the redo log backup will be completed without any errors.
Yes.
The SAP system runs under user SAPService<SID>. That user must be created on the target server.
Markus -
Conn. Failed Access Denied' Message
I only want to connect to the internet with my home network and I have set the n8 phone to do this.
Only thing is the phone keeps trying to access the internet and producing the above message this is using up the battery how do I fix this problem?
ThanksEither your password is wrong or you use MAC filtering on the router or accesspoint.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
550 Access denied - Invalid HELO name (See RFC2821 4.1.1.1)
i m trying to send the emails to some of the domains and i am getting the reply like this.................
Hi md,
Please refer to see RFC2821 4.1.1.1:
These commands are used to identify the SMTP client to the SMTP server. The argument field contains the fully-qualified domain name of the
SMTP client if one is available. In situations in which the SMTP client system does not have a meaningful domain name (e.g., when its address is dynamically allocated and no reverse mapping record is available), the client SHOULD send an address literal, optionally
followed by information that will help to identify the client system.
This issue may be caused by the FQDN on your send connector, you can change it to the proper name.
You can know more information from this document:
RTC 2821 Simple Mail Transfer Protocol
http://tools.ietf.org/html/rfc2821#section-4.1.1.1
Thanks,
Evan
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Hi, when i was deleted data and restored the factory setting. then i cant use wirelesslan or packet data!
it show me "connection failed. access denied"
pls help methanks for your help, i do hat but i still have problem... (
-
Oracle GoldenGate Veridata Exception (access denied)
Hello all,
I have recently installed weblogic 12.1.3 and Goldengate Veridata server on a Linux box successfully, and then successfully created a domain server to administer Veridata. After opening Veridata Web console with the newly created User from Weblogic Server that has all the privileges of veridata administration, in the new connection wizard, veridata shows following exception.
OGGV-00184: Error message: com.goldengate.wallet.WalletException: OGGV-80002: Put credential for CONN..IRIS2 failed: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=VERIDATA,keyName=CONN.IRIS2" "write").You have the wrong java version which i suppose is java8 which is not supported for 12c yet so downgrade to java 7. Not sure what flavour your OS is I used this How to Install Java 7 (Jdk 7u75) on CentOS/RHEL 7/6/5 and downgraded java restarted my weblogic and everything worked as expected.
Maybe you are looking for
-
Unable to get the JDBC from context
Dear experts I am new to Sun Application Server and I am trying hard to get the JDBC/ JMS connection factory via context factory. I tried two ways, one is the method in the development guide to get troough IIOP connection Properties lProps = new Prop
-
Latency type change (Slow speeds)
Hi there, I would like to request to have my Latency Type changed to Fast Path please, I understand the mods are able to help with this - here are my HH4 stats if they're needed? Thanks in advance 1. Product name: BT Home Hub 2. Serial number: +06834
-
My iphone4 will not connect to my network. My iPad and my wife's iPad and iphone4 all connect to my network. I have tried the solutions in Apple trouble shooting site. I even tried the freezer option. Still no connection.The "wheel" turns for 2 sec
-
Problems since 2.2.1 (applemobilebackup.exe error, long sync time)
After installing 2.2.1, I am experiencing the following and wondering if anyone on this forum has a solution to the following two issues. Thanks in advance. While syncing to my pc (it's a toshiba laptop running xp sp3), right before completing, there
-
Hi All, Any idea why Apple is not increasing the storage size of the iPads? The cost of Flash Storge drive is getting cheaper all the time: 128GB / $130 and 256GB is around $300, I'm sure Apple ordering in large volume could get the Flash memory at