C7 firmware 14.002....need help
I updated my C7-00 to version 14.002 through PC but after the update there was no loss of data from my phone which is shocking for me as in every update data is lost. It is showing me that my firmware version is 14.002. So has it really been updated or not??
And does this phone has push mail service or not??
Please help as soon as possible:-)
Its more like 24hr pull mail instead of pushmail, but the end result is the same (Use Nokia Messaging).
I dont know what happened to your old updates why they ended up that way. Probably due to old conflicting data.
If you find my post helpful please click the green star on the left under the avatar. Thanks.
Similar Messages
-
Micro 6gb /install/firmware PLEASE I NEED HELP A
I already have a 5gb micro working great on our 98se, bought a 6gb, computer wouldn't reconize using existing software, tryed to install software from 6gb, had errors, uninstalled and reinstalled, but won't find drivers for the 6gb. Someone told me to update drivers, I did , din't work, then told me to reload firm ware, on the micro. I did, but now how do you reload when the player cannot connect to usb port on computer?? Please help!!!!
Hi, which operating system are you running?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
Just installed security update 2014-002, now Itunes will not open, I have rebooted twice with no effect, I don't know what else to do to get my itunes back. Need help please
Believe I've firxed my problem, at least, ITunes is now working again. I followed the information provided from a couple of posts on this thread, (1) re restarting with command-s held down; did it twice, made no differerence; (2) manually re-installed the Security update; no difference; each time restarting, no effect; (3) shutdown the computer; I did for 35 minutes, upon restart, ITunes is back to normal, seems to be working fine. Turning the computer off must clear the cache?
-
Need help Firmware 6.0.2 updated yesterday draining
Need help updated Firmware to 6.0.2 crazy mad battery draining. This phone even switch to airplane mode the last three hours still drained about 30% battery life what is going on apple please sort this problem out.
Mines drains over 40% in two hours this is terrible I hardly even use it at all.
-
Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.
Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?
-
I need help with my EtreCheck report
Hi All -
Thanks for taking the time -
I NEED HELP WITH MY EtreCheck report
Problem description:
running slow
EtreCheck version: 2.1.8 (121)
Report generated February 19, 2015 at 3:18:49 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.6 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 130
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:12:52
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (362.64 GB free)
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.6) [Click for support]
[not loaded] com.sony.filesystem.prodisc_fs (2.3.0) [Click for support]
[not loaded] com.sony.protocol.prodisc (2.3.0) [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.versioncueCS3.plist [Click for support]
[loaded] com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist [Click for support]
User Launch Agents: ℹ️
[failed] [email protected] [Click for details]
[loaded] com.google.keystone.agent.plist [Click for support]
[failed] com.jdibackup.ZipCloud.autostart.plist [Click for support] [Click for details]
[loaded] com.jdibackup.ZipCloud.notify.plist [Click for support]
User Login Items: ℹ️
RED Watchdog Application (/Applications/REDCINE-X Professional/Utilities/RED Watchdog.app)
GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
GrowlHelperApp Application (/Users/[redacted]/Library/PreferencePanes/Growl.prefPane/Contents/Resources/Gr owlHelperApp.app)
iTunesHelper UNKNOWN Hidden (missing value)
QmasterStatusMenu Application (/Incompatible Software/Apple Qmaster.prefPane/Contents/Resources/QmasterStatusMenu.app)
SpyderUtility Application (/Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app)
Spyder3Utility Application (/Applications/Datacolor/Spyder3Elite/Spyder3Utility.app)
Google Drive Application (/Applications/Google Drive.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 8.1.0 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS3 [Click for support]
Flash Player [Click for support]
Growl [Click for support]
REDcode [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
10% mds
5% WindowServer
0% Google Drive
0% Google Chrome
0% fontd
Top Processes by Memory: ℹ️
172 MB Google Chrome
155 MB mds_stores
155 MB Mail
103 MB Google Chrome Helper
94 MB Google Drive
Virtual Memory Information: ℹ️
4.52 GB Free RAM
2.72 GB Active RAM
451 MB Inactive RAM
895 MB Wired RAM
1.30 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 19, 2015, 03:03:40 PM Self test - passedWhy Put it off I say ... Here you go Linc
Start time: 12:05:29 02/20/15
Revision: 1250
Model Identifier: MacBookPro9,1
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 2:42
UID: 504
I/O wait time (ms/s)
kernel_task (UID 0): 39
Font issues: 263
Trust settings: admin 4, user 4
TCP/IP
Subnet mask: 255.255.252.0
Listeners
cupsd: ipp
nfsd: 1023
rpc.lockd: 1017
rpc.rquotad: garcon
rpc.statd: exp1
rpcbind: sunrpc
System caches/logs
3319 MB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
2015-02-02 Mail crash
2015-02-04 Spyder3Utility crash
2015-02-20 Acrobat hang x3
2015-02-20 Final Cut Pro crash x2
HID errors: 22
Kernel log
Feb 20 10:20:53 Google Chrome He (map: 0xffffff801e1b7c30) triggered DYLD shared region unnest for map: 0xffffff801e1b7c30, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:31:10 ARPT: 3921.321063: MacAuthEvent en1 Auth result for: 00:19:92:35:03:01 Auth request tx failed
Feb 20 10:41:10 Google Chrome He (map: 0xffffff801e116870) triggered DYLD shared region unnest for map: 0xffffff801e116870, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:41:14 Google Chrome He (map: 0xffffff802265ee10) triggered DYLD shared region unnest for map: 0xffffff802265ee10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 10:41:30 Google Chrome He (map: 0xffffff802265ee10) triggered DYLD shared region unnest for map: 0xffffff802265ee10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome (map: 0xffffff801e116870) triggered DYLD shared region unnest for map: 0xffffff801e116870, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff802b72a960) triggered DYLD shared region unnest for map: 0xffffff802b72a960, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff802b72a3c0) triggered DYLD shared region unnest for map: 0xffffff802b72a3c0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:20:59 Google Chrome He (map: 0xffffff8023819f00) triggered DYLD shared region unnest for map: 0xffffff8023819f00, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff802cdb0e10) triggered DYLD shared region unnest for map: 0xffffff802cdb0e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff8022da2e10) triggered DYLD shared region unnest for map: 0xffffff8022da2e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:21:01 Google Chrome He (map: 0xffffff8023819b40) triggered DYLD shared region unnest for map: 0xffffff8023819b40, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:30:46 Sandbox: fontworker(1439) deny file-read-data /Library/Fonts/MyriadPro-LightCond.otf
Feb 20 11:30:46 Sandbox: fontworker(1439) deny file-read-data /Library/Fonts/MyriadPro-LightCondIt.otf
Feb 20 11:49:11 Google Chrome (map: 0xffffff802b72a2d0) triggered DYLD shared region unnest for map: 0xffffff802b72a2d0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff802cdb0780) triggered DYLD shared region unnest for map: 0xffffff802cdb0780, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63e10) triggered DYLD shared region unnest for map: 0xffffff8022a63e10, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63c30) triggered DYLD shared region unnest for map: 0xffffff8022a63c30, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff802cdb05a0) triggered DYLD shared region unnest for map: 0xffffff802cdb05a0, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63f00) triggered DYLD shared region unnest for map: 0xffffff8022a63f00, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:49:11 Google Chrome He (map: 0xffffff8022a63690) triggered DYLD shared region unnest for map: 0xffffff8022a63690, region 0x7fff8aa00000->0x7fff8ac00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Feb 20 11:59:29 Sandbox: fontworker(1671) deny file-read-data /Library/Fonts/MyriadPro-LightCond.otf
Feb 20 11:59:29 Sandbox: fontworker(1671) deny file-read-data /Library/Fonts/MyriadPro-LightCondIt.otf
Feb 20 12:08:01 ARPT: 8890.600067: MacAuthEvent en1 Auth result for: 00:19:92:35:7d:e1 Auth request tx failed
Feb 20 12:08:01 ARPT: 8890.950534: MacAuthEvent en1 Auth result for: 00:19:92:35:03:01 Auth timed out
System log
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:24:49 WindowServer: CGXGetConnectionProperty: Invalid connection 125827
Feb 20 11:25:05 airportd: _handleLinkEvent: WiFi is not powered. Resetting state variables.
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:01 WindowServer: WSGetSurfaceInWindow Invalid surface 489574406 for window 1303
Feb 20 11:28:49 WindowServer: WSBindSurface Invalid surface 723885656 for window 1311
Feb 20 11:29:13 fseventsd: event logs in /Volumes/WDA_1T/.fseventsd out of sync with volume. destroying old logs. (461 2 59825)
Feb 20 11:29:13 fseventsd: log dir: /Volumes/WDA_1T/.fseventsd getting new uuid: UUID
Feb 20 11:30:16 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:30:16 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:32:32 bird: Assertion failed: ![_xpcClients containsObject:client]
Feb 20 11:36:11 WindowServer: _CGXSetWindowHasKeyAppearance: Operation on a window 0x18 requiring rights kCGSWindowRightOwner by caller Dashboard
Feb 20 11:36:11 WindowServer: _CGXSetWindowHasMainAppearance: Operation on a window 0x18 requiring rights kCGSWindowRightOwner by caller Dashboard
Feb 20 11:41:24 apsd: Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[1532]
Feb 20 11:43:40 Mail: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
Feb 20 11:43:40 Mail: CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
Feb 20 12:01:17 WindowServer: WSGetSurfaceInWindow Invalid surface 710322265 for window 1327
Feb 20 12:04:39 fseventsd: implementation_removed_client: did not find client 0x7f9eec210660 for path = '/.docid'
Feb 20 12:11:28 apsd: Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[2262]
Console log
Feb 15 12:07:08 ReportCrash: Invoking spindump for pid=644 wakeups_rate=158 duration=285 because of excessive wakeups
Feb 15 12:55:36 ReportCrash: Invoking spindump for pid=754 wakeups_rate=200 duration=225 because of excessive wakeups
Feb 15 13:59:55 ReportCrash: Invoking spindump for pid=913 wakeups_rate=186 duration=242 because of excessive wakeups
Feb 15 16:54:59 ReportCrash: Invoking spindump for pid=964 wakeups_rate=188 duration=240 because of excessive wakeups
Feb 16 10:35:10 ReportCrash: Invoking spindump for pid=1059 wakeups_rate=337 duration=134 because of excessive wakeups
Feb 16 10:51:21 ReportCrash: Invoking spindump for pid=1080 wakeups_rate=161 duration=280 because of excessive wakeups
Feb 16 11:59:13 ReportCrash: Invoking spindump for pid=1168 wakeups_rate=243 duration=186 because of excessive wakeups
Feb 16 12:02:57 ReportCrash: Invoking spindump for pid=1175 wakeups_rate=382 duration=118 because of excessive wakeups
Feb 16 13:07:53 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.ic.searchinstaller/Cache.db is NOT valid. Unable to determine schema version.
Feb 16 13:07:53 nsurlstoraged: ERROR: unable to determine file-system usage for FS-backed cache at /Users/USER/Library/Caches/com.ic.searchinstaller/fsCachedData. Errno=13
Feb 16 13:22:31 ReportCrash: Invoking spindump for pid=2237 wakeups_rate=326 duration=139 because of excessive wakeups
Feb 16 14:17:37 ReportCrash: Invoking spindump for pid=2420 wakeups_rate=228 duration=198 because of excessive wakeups
Feb 16 14:33:29 ReportCrash: Invoking spindump for pid=2438 wakeups_rate=240 duration=188 because of excessive wakeups
Feb 16 14:46:36 ReportCrash: Invoking spindump for pid=2454 wakeups_rate=305 duration=148 because of excessive wakeups
Feb 17 12:58:26 ReportCrash: Invoking spindump for pid=2894 wakeups_rate=689 duration=66 because of excessive wakeups
Feb 17 13:13:41 ReportCrash: Invoking spindump for pid=2914 wakeups_rate=487 duration=93 because of excessive wakeups
Feb 17 16:54:57 ReportCrash: Invoking spindump for pid=1965 wakeups_rate=162 duration=278 because of excessive wakeups
Feb 18 13:50:58 ReportCrash: Invoking spindump for pid=3869 wakeups_rate=160 duration=282 because of excessive wakeups
Feb 19 08:17:10 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 14:59:30 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 15:04:57 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 19 15:18:06 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
Feb 19 16:50:23 ReportCrash: Invoking spindump for pid=3308 wakeups_rate=189 duration=239 because of excessive wakeups
Feb 20 09:24:49 nsurlstoraged: The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Daemons
com.adobe.fpsaud
com.adobe.versioncueCS3
com.ambrosiasw.ambrosiaaudiosupporthelper.daemon
com.apple.watchdogd
Agents
[email protected]
- status: 78
com.apple.Finder
- status: -15
com.google.keystone.user.agent
com.jdibackup.ZipCloud.autostart
- status: 1
com.jdibackup.ZipCloud.notify
- status: 1
User login items
RED Watchdog
- /Applications/REDCINE-X Professional/Utilities/RED Watchdog.app
GrowlHelperApp
- /Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app
GrowlHelperApp
- /Users/USER/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelp erApp.app
iTunesHelper
- missing value
QmasterStatusMenu
- /Incompatible Software/Apple Qmaster.prefPane/Contents/Resources/QmasterStatusMenu.app
SpyderUtility
- /Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app
Spyder3Utility
- /Applications/Datacolor/Spyder3Elite/Spyder3Utility.app
Google Drive
- /Applications/Google Drive.app
Google Chrome
- /Applications/Google Chrome.app
Firefox extensions
Live PageRank
Web Developer
Exif Viewer
iCloud errors
bird 418
cloudd 65
Continuity errors
sharingd 21
Restricted files: 335
Lockfiles: 48
Contents of /Library/LaunchDaemons/com.adobe.versioncueCS3.plist
- mod date: Oct 20 14:05:00 2009
- checksum: 714202969
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GroupName</key>
<string>wheel</string>
<key>Label</key>
<string>com.adobe.versioncueCS3</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3d</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ServiceDescription</key>
<string>Adobe Version Cue CS3</string>
<key>UserName</key>
<string>root</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist
- mod date: Dec 21 11:32:33 2012
- checksum: 1980407752
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.ambrosiasw.ambrosiaaudiosupporthelper.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/System/Library/Extensions/AmbrosiaAudioSupport.kext/Contents/MacOS/amb rosiaaudiosupporthelper</string>
</array>
<key>KeepAlive</key>
<false/>
<key>Disabled</key>
<false/>
<key>LaunchEvents</key>
<dict>
<key>com.apple.iokit.matching</key>
<dict>
<key>AmbrosiaAudioSupport</key>
<dict>
<key>IOMatchLaunchStream</key>
<true/>
<key>IOProviderClass</key>
<string>com_AmbrosiaSW_AudioSupport</string>
</dict>
...and 4 more line(s)
Contents of /Library/LaunchDaemons/com.apple.qmaster.qmasterd.plist
- mod date: Aug 25 21:24:23 2010
- checksum: 681742547
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.qmaster.qmasterd</string>
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/qmasterd</string>
</array>
<key>OnDemand</key>
<false/>
</dict>
</plist>
Contents of /private/etc/hosts
- mod date: Sep 20 11:46:00 2013
- checksum: 1921340845
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
Contents of Library/LaunchAgents/[email protected]
- mod date: Sep 15 12:18:45 2009
- checksum: 2526625188
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>[email protected]</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>LowPriorityIO</key>
<true/>
<key>Nice</key>
<integer>10</integer>
<key>ProgramArguments</key>
<array>
<string>/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices .framework/Versions/A/Support/CSConfigDotMacCert</string>
<string>-l</string>
<string>/Users/USER/Library/Logs/[email protected]</string>
<string>-u</string>
<string>@me.com</string>
<string>-t</string>
<string>SharedServices</string>
<string>-s</string>
</array>
...and 4 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist
- mod date: Nov 28 13:56:29 2014
- checksum: 3826001454
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.jdibackup.ZipCloud.autostart.plist
- mod date: Feb 19 15:00:08 2015
- checksum: 2356528749
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.jdibackup.ZipCloud.autostart</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>/Applications/ZipCloud.app/Contents/Resources/Utility.app</string>
<string>-n</string>
<string>--args</string>
<string>9</string>
<string>-l</string>
</array>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_out.log</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_err.log</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.jdibackup.ZipCloud.notify.plist
- mod date: Feb 19 15:00:08 2015
- checksum: 1841511774
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.jdibackup.ZipCloud.notify</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>/Applications/ZipCloud.app/Contents/Resources/Utility.app</string>
<string>--args</string>
<string>7</string>
<string>1</string>
</array>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_out.log</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/ZipCloud/lagent_err.log</string>
<key>StartInterval</key>
<integer>1200</integer>
<key>RunAtLoad</key>
<false/>
</dict>
</plist>
Extensions
/System/Library/Extensions/AmbrosiaAudioSupport.kext
- com.AmbrosiaSW.AudioSupport
/System/Library/Extensions/FAMProtocol.kext
- com.sony.protocol.prodisc
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/prodisc_fs.kext
- com.sony.filesystem.prodisc_fs
Applications
/Applications/Adobe Acrobat 8 Professional/Acrobat Distiller.app
- com.adobe.distiller
/Applications/Adobe Acrobat 8 Professional/Acrobat Uninstaller.app
- com.adobe.Acrobat.Uninstaller
/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app
- com.adobe.Acrobat.Pro
/Applications/Adobe Bridge CS3/Bridge CS3.app
- com.adobe.bridge2
/Applications/Adobe Device Central CS3/Device Central.app
- com.adobe.devicecentral.application
/Applications/Adobe Dreamweaver CS3/Dreamweaver.app
- com.adobe.dreamweaver-9.0
/Applications/Adobe Extension Manager/Extension Manager.app
- com.adobe.ExtensionManager
/Applications/Adobe Fireworks CS3/Adobe Fireworks CS3.app
- com.macromedia.fireworks
/Applications/Adobe Flash CS3 Video Encoder/Adobe Flash CS3 Video Encoder.app
- com.macromedia.FLVEncoder
/Applications/Adobe Flash CS3/Adobe Flash CS3.app
- com.adobe.flash-9.0-en_us
/Applications/Adobe Flash CS3/Players/Debug/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Debug/Install Flash Player 9 UB.app
- com.MindVision.VISEX
/Applications/Adobe Flash CS3/Players/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Release/Flash Player.app
- com.macromedia.Flash Player.app
/Applications/Adobe Flash CS3/Players/Release/Install Flash Player 9 UB.app
- com.MindVision.VISEX
/Applications/Adobe Help Viewer 1.0.app
- com.adobe.Adobe Help Viewer
/Applications/Adobe Help Viewer 1.1.app
- com.adobe.Adobe Help Viewer
/Applications/Adobe Illustrator CS3/Adobe Illustrator.app
- com.adobe.illustrator
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Analyze Documents.localized/Analyze Documents.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Calendar.localized/Make Calendar.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Collect for Output.localized/Collect for Output.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Contact Sheet Demo.localized/Contact Sheets.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Export Flash Animation.localized/Export Flash Animation.app
- N/A
/Applications/Adobe Illustrator CS3/Scripting.localized/Sample Scripts.localized/AppleScript/Web Gallery.localized/Web Gallery.app
- N/A
/Applications/Adobe Photoshop CS3/Adobe Photoshop CS3.app
- com.adobe.Photoshop
/Applications/Adobe Premiere Pro CS3/Adobe Premiere Pro CS3.app
- com.adobe.AdobePremierePro
/Applications/Adobe Stock Photos CS3/Adobe Stock Photos CS3.app
- com.adobe.stockphotos-1.5
/Applications/Audacity/Audacity.app
- net.sourceforge.audacity
/Applications/Beak.app
- com.flyosity.beak
/Applications/Buzzbird.app
- org.buzzbird.buzzbird
/Applications/Celtx.app
- ca.greyfirst.celtx
/Applications/Datacolor/Spyder3Elite/Spyder3Elite.app
- com.datacolor.spyder3elite
/Applications/Datacolor/Spyder3Elite/Spyder3Utility.app
- com.datacolor.spyder3utility
/Applications/Datacolor/Spyder3Elite/Support/SpyderUtility.app
- com.datacolor.spyderutility
/Applications/Disk Inventory X.app
- com.derlien.DiskInventoryX
/Applications/Epson Software/Print CD/Print CD.app
- jp.co.epson.PrintCD2
/Applications/FileZilla.app
- de.filezilla
/Applications/FlashVideo Converter.app
- com.geovid.
/Applications/Gorilla Folder/Gorilla Program 4.0.0/Gorilla 4.0.0
- N/A
/Applications/HandBrake.app
- org.m0k.handbrake
/Applications/Levelator.app
- org.conversationsnetwork.levelator
/Applications/OpenOffice.org.app
- org.openoffice.script
/Applications/RecBoot.app
- com.lepidu.RecBoot
/Applications/Smultron.app
- org.smultron.Smultron
/Applications/TouchCopy.app
- N/A
/Applications/Uninstall MM Scheduling/Uninstall MM Scheduling.app
- N/A
/Applications/Utilities/Adobe Utilities.localized/Adobe Updater5/Adobe Updater.app
- "com.Adobe.ESD.AdobeUpdaterApplication"
/Applications/Utilities/Adobe Utilities.localized/ExtendScript Toolkit 2/ExtendScript Toolkit 2.app
- com.adobe.estoolkit-2.0
/Applications/Utilities/Bluetooth Firmware Update.app
- com.apple.updaters.btfirmwareupdate201
/Applications/Utilities/FAM Driver Tool.app
- com.sony.famdrivertool
/Applications/VLC.app
- org.videolan.vlc
/Applications/XDCAM Transfer.app
- com.sony.bprl.xdcamtransfer
/Applications/YouSendIt Desktop App.app
- com.yousendit.YouSendIt
/Applications/YouSendIt.app
- com.yousendit.YouSendItExpress
/Applications/gedit.app
- org.gnome.gedit
/Applications/iWork '08/Keynote.app
- com.apple.iWork.Keynote
/Applications/iWork '08/Numbers.app
- com.apple.iWork.Numbers
/Applications/iWork '08/Pages.app
- com.apple.iWork.Pages
/Developer/Applications/Utilities/MacPython 2.5/Build Applet.app
- org.python.buildapplet
/Developer/Applications/Utilities/Python 2.6/Build Applet.app
- org.python.buildapplet
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS4.2.sdk/System/Li brary/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.0/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.3/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1.3/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.1/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.1/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/3.2/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.1/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0.2/Symbols/System/Libra ry/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.0/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneOS.platform/DeviceSupport/4.1/Symbols/System/Library /CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileAddressBook.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator3.2 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Contacts.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Game Center.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.0 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Contacts.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Game Center~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.1 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/AdSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/AdSheet~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Camera.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Contacts~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Contacts~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/DataActivation.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Game Center~ipad.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Game Center~iphone.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/MobileSafari.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/MobileSlideShow.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Preferences.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/TrustMe.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/Web.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/WebSheet.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/Applications/iPodOut.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/MobileStorageMounter.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/SpringBoard.app
- N/A
/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.2 .sdk/System/Library/CoreServices/VoiceOverTouch.app
- N/A
/Library/Application Support/Adobe/Adobe Asset Services CS3/AssetServicesCS3.app
- com.adobe.assetServicesCS3
/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3.app
- com.adobe.versioncueCS3.VersionCueCS3
/Library/Application Support/Adobe/Adobe Version Cue CS3/Server/bin/VersionCueCS3Status.app
- com.adobe.versioncueCS3.VCStatusMenu
/Library/Application Support/Adobe/Installers/UUID/Setup.app
- com.adobe.Installers.Redirector
/Library/Application Support/Adobe/Installers/R1/Setup.app
- com.adobe.Installers.Setup
/Library/Application Support/Intuit/QuickBooks/2007/JHandShake.app
- com.intuit.JHandShake
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
- com.microsoft.silverlight.sllauncher
/Library/Application Support/ProApps/MIO/RAD/Plugins/ReadMe(Image Handling Library).app
- jp.co.canon.DocumentLauncher
/Library/Application Support/iWork '08/iWork Tour.app
- com.apple.iWorkTour
/Library/Documentation/User Guides And Information.localized/Apple Hardware Test Read Me.app
- com.apple.AppleHardwareTestReadMe
/Library/Printers/EPSON/InkjetPrinter/AutoSetupTool/EPIJAutoSetupTool.app
- com.epson.ijprinter.EPIJAutoSetupTool
/Library/Printers/EPSON/InkjetPrinter/Filter/rastertoescp.app
- com.epson.ijprinter.rastertoescp
/Library/Printers/EPSON/InkjetPrinter/Utilities/EPSON Printer Utility3.app
- com.epson.ijprinter.Utility3
/Library/Printers/hp/Fax/fax.backend
- com.hp.fax
/Library/Printers/hp/Fax/rastertofax.filter
- com.hp.rastertofax
/Library/Printers/hp/cups/filters/pdftopdf.filter
- com.hp.print.cups.filter.pdftopdf
/Users/USER/Documents/iPhone Apps/Archivers/build/Debug-iphonesimulator/Archivers.app
- N/A
/Users/USER/Documents/iPhone Apps/Archivers_test/build/Debug-iphonesimulator/Archivers.app
- N/A
/Users/USER/Documents/iPhone Apps/DateCell/build/Debug-iphonesimulator/DateCell.app
- N/A
/Users/USER/Documents/iPhone Apps/EasyCustomTable/build/Debug-iphonesimulator/EasyCustomTable.app
- N/A
/Users/USER/Documents/iPhone Apps/Grids/build/Debug-iphonesimulator/Grids.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug-iphoneos/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug-iphonesimulator/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Debug/Metalsmith Suite.app
- com.yourcompany.Metalsmith-Suite
/Users/USER/Documents/iPhone Apps/Metalsmith Suite/build/Distrobution-iphoneos/Metalsmith Suite.app
- N/A
/Users/USER/Documents/iPhone Apps/Scrolling/build/Debug-iphonesimulator/Scrolling.app
- N/A
/Users/USER/Documents/iPhone Apps/UICatalog/build/Debug-iphonesimulator/UICatalog.app
- N/A
/Users/USER/Documents/iPhone Apps/WebViewTutorial/build/Debug-iphonesimulator/WebViewTutorial.app
- N/A
/Users/USER/Documents/iPhone Apps/XML/build/Debug-iphonesimulator/XML.app
- N/A
/Users/USER/Documents/sites/nvrslp.com/dev/the_lab/ns_resize
- N/A
/Users/USER/Documents/sites/zoomify/Zoomifyer EZ v3.1/Zoomifyer EZ.app
- N/A
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_apdfllckaahabafndbhieahigkjlhalf/Default apdfllckaahabafndbhieahigkjlhalf.app
- com.google.Chrome.app.Default-apdfllckaahabafndbhieahigkjlhalf-internal
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_bepbmhgboaologfdajaanbcjmnhjmhfn/Default bepbmhgboaologfdajaanbcjmnhjmhfn.app
- com.google.Chrome.app.Default-bepbmhgboaologfdajaanbcjmnhjmhfn-internal
/Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_blpebaehgfgkcmmjjknibibbjacnplim/Default blpebaehgfgkcmmjjknibibbjacnplim.app
- com.google.Chrome.app.Default-blpebaehgfgkcmmjjknibibbjacnplim-internal
/Users/USER/Library/Application Support/iPhone Simulator/3.1.2/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/UICatalog.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/WebViewTutorial.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/Archivers.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.1.3/Applications/UUID/AnimatedGifExample.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/3.2/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/4.2/Applications/UUID/Spinspiration.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/XML.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/DateCell.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/UICatalog.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Metalsmith Suite.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Scrolling.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Autoscroll.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/Grids.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/TapToZoom.app
- N/A
/Users/USER/Library/Application Support/iPhone Simulator/User/Applications/UUID/EasyCustomTable.app
- N/A
/Users/USER/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/octoshape/octoshape
- N/A
Frameworks
/Library/Frameworks/REDCODE.Color.framework
- com.red.redcode.color
/Users/USER/Library/Frameworks/EWSMac-GC.framework
- com.eSellerate.EWSMac67108872
PrefPane
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/REDcode.prefPane
- com.red.prefpanel
/Library/PreferencePanes/VersionCueCS3.prefPane
- com.adobe.versioncueCS3.VCPrefPane
/Users/USER/Library/PreferencePanes/Growl.prefPane
- com.growl.prefpanel
Bundles
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/ASEFormat.plugin
- com.adobe.aseformat
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/BMP.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Cineon.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/EPS Parser.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/GIF.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/JPEG2000.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/OpenEXR.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PBM.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PCX.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/PNG.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Pixar.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Radiance.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/Targa.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/WBMP.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/altiveccore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/dicom.plugin
- com.adobe.dicom
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/mmxcore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/multiprocessor support.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Plug-Ins/ppccore.plugin
- null
/Library/Application Support/Adobe/Adobe Asset Services CS3/Required/Photoshop Adapter.plugin
- null
/Library/Application Support/Adobe/Flash Player/Flash Player.plugin
- com.macromedia.Flash Player.plugin
/Library/Application Support/Adobe/Plug-Ins/CS3/File Formats/Camera Raw.plugin
- com.adobe.CameraRaw
/Library/Frameworks/HPDeviceModel.framework/Versions/2.0/Frameworks/Core.framew ork/Versions/2.0/Resources/PlugIns/CFXmlParser.plugin
- com.hp.dmf.plugins.CFXmlParser
/Library/Frameworks/HPDeviceModel.framework/Versions/2.0/Frameworks/Core.framew ork/ -
Need help on how to a user can control a video clip using their mouse
I need help. I've got a video clip of a rotating 3D
object(left to right) and i would like the user to be able to
control the rotation of the object using their mouse. I've looked
everywhere and i'm at a lost. Can anyone help me
Here is a link to what i'm trying to achieve:
http://www.sun.com/servers/blades/6000/gallery/index.xml?p=1&s=2
I know they use Java but i'm sure this can be done in Flash.
Thanks
RayHere are the instructions...
Update firmware with DOS CD
To boot from CD you have to hold down the option key (<alt>) during startup. A HDD icon and a CD should appear on the gray screen. The HDD has the volume name written below and the CD is named Windows. Select the CD and boot to DOS.
Hit <ESC> to skip the README.TXT
Use PG UP/DOWN keys on an external keyboard to scroll through the readme, using arrow keys may lock DOS.
SeaFlash offers some options you should explore before performing the update. If you just want to do it ASAP then hit <D>.
Hit <L> to list compatible drives and FW version. (Column New FW version should state SD24, hit <ESC> to go back to main menu.)
Hit to scan your drive(s). (Shows your model and FW, <ESC> for main menu)
Finally hit <D> to update your Momentus XT to SD24. (takes about 15s to update)
Power off your Mac.
-- Although it did made sense to what you are saying to just follow Seagate's instructions. But they only had instructions outside the realm of MS Windows is to burn it on a disk and run a cold boot to the disk drive. Otherwise if Seagate did provide detail instruction on how to install this then can you provide me a link?
Thanks again.... -
hi friends,
I need to learn hr abap.I need help from u ...if anyone have hr abap documents or books please give me..or suggest me some basic hr abap book names
Thank u.
Pinky.sample programs
REPORT ZPETROL_EXCLUDE .
TABLES SSCRFIELDS.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECTION-SCREEN SKIP 9.
PARAMETERS NUMBER(200) TYPE C.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN:
BEGIN OF LINE,
PUSHBUTTON 2(10) TEXT-001 USER-COMMAND PROC,
END OF LINE.
SELECTION-SCREEN END OF SCREEN 100.
CALL SCREEN 100.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'PROC'.
SET PARAMETER ID: 'NUM' FIELD NUMBER.
CALL TRANSACTION 'ZP_PALLOWANCE'.
LEAVE TO SCREEN 0.
ENDCASE.
SECOND PRG
REPORT ZPR_PETROL_ALLOWANCE NO STANDARD PAGE
HEADING .
*-- Infotypes
INFOTYPES : 0000, "Actions
0002, "Personal Data
0008. "Basic pay details
*-- Tables
TABLES : PERNR, "Standard Selections for HR Master Data Reporting
PC207, "Payroll Results: Results Table
PCL1, "HR Cluster 1
PCL2, "HR Cluster 2
T510, "Pay scales
T549A, "Payroll areas
T549Q, "Payroll Periods
PA0002. "Personal details
*-- Internal Tables
*-- Internal Table Declaration For Holding The Data
DATA: BEGIN OF INT_PETROL OCCURS 0,
PERNR LIKE PA0008-PERNR, "Personnel Number
TRFST LIKE PA0008-TRFST, "Pay Scale Level
NAME(40), "Name of Employee
PALLOWANCE TYPE P DECIMALS 2, "Petrol Allowance Amount
END OF INT_PETROL.
DATA: BEGIN OF PA0015_DATA OCCURS 0,
PERNR LIKE PA0015-PERNR,
BETRG LIKE PA0015-BETRG,
END OF PA0015_DATA.
DATA:BEGIN OF INT_PETROL2 OCCURS 0,
PERNR LIKE PA0008-PERNR, "Personnel Number
VORNA LIKE PA0002-VORNA, "First Name
NACHN LIKE PA0002-NACHN, "Last Name
TRFST LIKE PA0008-TRFST, "Pay Scale Level
NAME(40), "Name of Employee
PALLOWANCE TYPE P DECIMALS 2, "Petrol Allowance Amount
END OF INT_PETROL2.
DATA : TITLE TYPE LVC_TITLE.
DATA: BEGIN OF PER_NO OCCURS 0,
PERNR LIKE PA0008-PERNR,
TRFST LIKE PA0008-TRFST,
END OF PER_NO.
DATA: BEGIN OF MSG OCCURS 0,
MSG1(100) TYPE C,
END OF MSG.
DATA: FLAG TYPE I VALUE '0',
DIS_FLAG TYPE I VALUE '0'.
DATA: INT_PETROL3 LIKE STANDARD TABLE OF INT_PETROL2 INITIAL SIZE 0
WITH HEADER LINE.
DATA: INT_PETROL1 LIKE STANDARD TABLE OF INT_PETROL INITIAL SIZE 0 WITH
HEADER LINE.
DATA: WA_PET_ALLOWANCE TYPE ZBPETROL_ALL. "WORKAREA FOR INSERTING
VALUES.
*DATA: P_LGART1 LIKE T512T-LGART VALUE '0010'. "CHANGE WAGE TYPE HERE
DATA: P_LGART1 LIKE T512T-LGART VALUE '0077'. "CHANGE WAGE TYPE HERE
DATA: BEGIN OF INT_0015 OCCURS 0,
PERNR(038),
BEGDA(010),
BETRG(018),
END OF INT_0015.
*-- Internal Table To Store Error Records.
DATA: E_INT_0015 LIKE INT_0015 OCCURS 0 WITH HEADER LINE.
*-- Batch Input Data of Single Transaction
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*-- Internal Table For Export and Import Payroll Results
DATA: INT_RGDIR LIKE PC261 OCCURS 0 WITH HEADER LINE,
LGTXT LIKE T512T-LGTXT.
DATA: BEGIN OF EMP_NO OCCURS 0,
PERNR(4) TYPE C,
END OF EMP_NO.
DATA: BEGIN OF EMP_NO1 OCCURS 0,
PERNR TYPE I,
END OF EMP_NO1.
DATA EMPNO LIKE STANDARD TABLE OF EMP_NO INITIAL SIZE 0.
DATA EMPNO1 LIKE STANDARD TABLE OF EMP_NO1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA LEN1 TYPE I.
DATA: ERR LIKE MESSAGE.
DATA TEMP_NUM(200) TYPE C.
*-- Includes
*-- International Include
INCLUDE RPC2CD09. "Cluster CD data definition
INCLUDE RPC2CA00. "Cluster CA Data-Definition
INCLUDE RPPPXD00. "Data Definition buffer PCL1/PCL2 Buffer INCLUDE RPPPXD10.
"Common part buffer PCL1/PCL2 INCLUDE RPPPXM00. "Buffer Handling routine
*-- Country Specific Include
INCLUDE PC2RXIN0. "Cluster IN data definition
INCLUDE RPC2RX09.
*-- ALV Declaration
TYPE-POOLS : SLIS.
DATA: INT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
INT_EVENTS TYPE SLIS_T_EVENT,
INT_LAYOUT TYPE SLIS_LAYOUT_ALV,
WS_EVENTS TYPE SLIS_ALV_EVENT,
WS_REPID LIKE SY-REPID.
*-- Initialization
INITIALIZATION.
WS_REPID = SY-REPID.
*-- At Selection-Screen
START-OF-SELECTION.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) TEXT-002.
SELECTION-SCREEN POSITION 33.
PARAMETERS: P_RATE TYPE P DECIMALS 2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF BLOCK B3.
PARAMETERS: P_UPLOAD AS CHECKBOX,
P_FG RADIOBUTTON GROUP G1,
P_BG RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B4.
PARAMETERS: P_DI AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK B4.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN.
*-- Wate Type Text
SELECT SINGLE LGTXT INTO LGTXT FROM T512T WHERE SPRSL = 'E' AND
MOLGA = '40' AND LGART = P_LGART1 .
*-- Data Retrieval From Logical Database PNP
GET PERNR.
PROVIDE PERNR FROM P0000 VORNA NACHN FROM P0002 BETWEEN PN-BEGDA AND
PN-ENDDA.
INT_PETROL1-PERNR = P0000-PERNR.
CONCATENATE P0002-VORNA P0002-NACHN INTO INT_PETROL1-NAME SEPARATED
BY SPACE.
ENDPROVIDE.
*-- Clear Data
CLEAR: RGDIR, INT_RGDIR.
REFRESH: RGDIR, INT_RGDIR.
*-- Read All The Payroll Runs For An Employee
CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
CHECK RP-IMP-CD-SUBRC EQ 0.
*-- Clear Data
REFRESH: RT.
Read IN Cluster.
LOOP AT RGDIR WHERE FPBEG >= PN-BEGDA AND FPEND <= PN-ENDDA.
MOVE-CORRESPONDING RGDIR TO INT_RGDIR.
APPEND INT_RGDIR.
CLEAR INT_RGDIR.
ENDLOOP.
Read the last record.
SORT INT_RGDIR BY SEQNR DESCENDING.
READ TABLE INT_RGDIR INDEX 1.
RX-KEY-SEQNO = INT_RGDIR-SEQNR.
RX-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-IN.
CHECK RP-IMP-IN-SUBRC EQ 0.
READ TABLE RT WITH KEY LGART = P_LGART1.
IF SY-SUBRC = 0.
INT_PETROL1-PALLOWANCE = RT-BETRG.
ENDIF.
APPEND INT_PETROL1.
CLEAR INT_PETROL1.
SELECT TRFST PERNR
INTO CORRESPONDING FIELDS OF TABLE PER_NO
FROM PA0008
WHERE TRFST LIKE 'L%'
AND BET01 > 0.
SORT PER_NO.
DELETE ADJACENT DUPLICATES FROM PER_NO.
*-- END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT INT_PETROL1.
READ TABLE PER_NO WITH KEY PERNR = INT_PETROL1-PERNR.
IF SY-SUBRC = 0.
INT_PETROL-TRFST = PER_NO-TRFST.
MODIFY INT_PETROL1 FROM INT_PETROL TRANSPORTING TRFST.
ENDIF.
ENDLOOP.
SORT INT_PETROL1.
DELETE ADJACENT DUPLICATES FROM INT_PETROL1.
CONCATENATE 'From' ' : ' PN-BEGDA6(2) '.' PN-BEGDA4(2) '.' PN-
BEGDA+0(4)
' To' ' : ' PN-ENDDA6(2) '.' PN-ENDDA4(2) '.' PN-ENDDA+0(4)
INTO TITLE.
IF P_DI = 'X'. "TO DISPLAY PETROL ALLOWANCE ONLY
IF PNPTIMRA = 'X'. "CHECK OTHER PERIOD CHECKED
DIS_FLAG = 1.
ENDIF.
IF PNPTIMR9 = 'X'. "CHECK TO SEE CURRENT PERIOD SELECTED
CASES - NO RATE GIVEN, RATE GIVEN
CURRENT PERIOD UPLOADED BUT PAYROLL NOT WRITTEN SO NO RESULT FROM LDB
SELECT RATE INTO P_RATE FROM ZBPETROL_ALL WHERE BEGDA = PN- BEGDA AND ENDDA = PN-ENDDA.
ENDSELECT.
IF SY-DBCNT = 0.
MESSAGE I455(0) WITH 'NO PETROL RATE EXSISTS'.
ELSE.
FLAG = 1.
ENDIF. "OF SY-DBCNT
IF P_RATE > 0 AND FLAG = 1. " PETROL RATE EXSISTS.
SELECT PERNR SUM( BETRG ) INTO TABLE PA0015_DATA
FROM PA0015
WHERE BEGDA BETWEEN PN-BEGDA AND PN-ENDDA
GROUP BY PERNR.
SELECT APERNR ATRFST BVORNA BNACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON BPERNR = APERNR
WHERE A~TRFST LIKE 'L%'
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE PA0015_DATA WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC = 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
INT_PETROL-PALLOWANCE = PA0015_DATA-BETRG.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
DIS_FLAG = 1.
ENDIF. "P_RATE > 0 AND FLAG = 1.
IF P_RATE > 0 AND FLAG = 0. "CURRENT PERIOD AND DATA NOT UPLOADED
SELECT APERNR ATRFST BVORNA BNACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON BPERNR = APERNR
WHERE A~TRFST LIKE 'L%'
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
PERFORM GET_VALUE. "TO CONVERT THE FIRST SCREEN PERNR INTO
NUMBER FORMATE
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE EMPNO1 WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC <> 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
PERFORM CAL_ALLOWANCE.
ENDIF. " OF P_RATE > 0
DIS_FLAG = 1.
ENDIF. " OF CURRENT PERIOD CHECK.
ENDIF. " OF CHECK DISPLAY.
*----BDC
IF P_UPLOAD = 'X'.
IF PNPTIMRA = 'X'. "CHECK OTHER PERIOD CHECKED
MESSAGE I455(0) WITH 'Petrol Allowance cannot be uploaded'.
LEAVE SCREEN.
ENDIF.
IF P_RATE > 0.
IF P_RATE > 0 OR P_RATE = 0.
IF PNPTIMR9 = 'X'. "CHECK TO SEE CURRENT PERIOD SELECTED
WA_PET_ALLOWANCE-BEGDA = PN-BEGDA.
WA_PET_ALLOWANCE-ENDDA = PN-ENDDA.
WA_PET_ALLOWANCE-RATE = P_RATE.
WA_PET_ALLOWANCE-CURR = 'INR'.
INSERT INTO ZBPETROL_ALL VALUES WA_PET_ALLOWANCE.
SELECT A~PERNR A~TRFST B~VORNA B~NACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON B~PERNR = A~PERNR
WHERE A~TRFST IN ('L1' , 'L2' , 'L3')
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
PERFORM GET_VALUE. "TO CONVERT THE FIRST SCREEN PERNR INTO
NUMBER FORMATE
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE EMPNO1 WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC <> 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
PERFORM CAL_ALLOWANCE.
DIS_FLAG = 1.
SORT INT_PETROL1.
LOOP AT INT_PETROL1.
MOVE: INT_PETROL1-PERNR TO INT_0015-PERNR,
INT_PETROL1-PALLOWANCE TO INT_0015-BETRG.
CONCATENATE PN-ENDDA6(2) PN-ENDDA4(2) PN-ENDDA+0(4) INTO
INT_0015-BEGDA SEPARATED BY '.'.
APPEND INT_0015.
CLEAR INT_0015.
ENDLOOP.
LOOP AT INT_0015.
PERFORM F_BDCDATA.
IF P_FG = 'X'.
CALL TRANSACTION 'PA30' USING BDCDATA MODE 'A' UPDATE 'S'.
ELSE.
CALL TRANSACTION 'PA30' USING BDCDATA MODE 'N' UPDATE 'S'.
ENDIF.
*-- Handling Error records.
IF SY-SUBRC <> 0.
*-- Handling Error Messages
PERFORM ERROR_MSG.
MOVE-CORRESPONDING INT_0015 TO E_INT_0015.
APPEND E_INT_0015.
CLEAR E_INT_0015.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
*-- Downloading Error Records.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\Errors.Txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = E_INT_0015.
*-- Downloading Error Messages.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\Err_Msg.Txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = MSG.
ENDIF. " FOR CURRENT PERIOD
ENDIF.
ELSE.
MESSAGE I455(0) WITH 'Enter Petrol Rate'.
LEAVE TO SCREEN 0.
ENDIF. " FOR PETROL RATE
ENDIF. " FOR UPLOAD
IF DIS_FLAG = 1.
INT_LAYOUT-SUBTOTALS_TEXT = TEXT-004.
INT_LAYOUT-TOTALS_TEXT = TEXT-004.
INT_LAYOUT-ZEBRA = 'X'.
PERFORM FILL_FIELDCAT.
PERFORM GET_EVENTS_ALV.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = WS_REPID
IS_LAYOUT = INT_LAYOUT
IT_FIELDCAT = INT_FIELDCAT[]
I_DEFAULT = 'X'
I_SAVE = 'X'
IT_EVENTS = INT_EVENTS
TABLES
T_OUTTAB = INT_PETROL1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*& Form GET_VALUE
text
FORM GET_VALUE.
GET PARAMETER ID: 'NUM' FIELD TEMP_NUM.
IF TEMP_NUM <> ''.
LEN1 = STRLEN( TEMP_NUM ).
PERFORM GET_PERNR.
APPEND TEMP_NUM TO EMPNO.
LOOP AT EMPNO INTO EMP_NO.
CALL FUNCTION 'CHECK_AND_CONVERT_NUMERICS'
EXPORTING
DFELD = ' '
DMZEI = ','
DTYPE = 'STRING'
DYPNO = ' '
EFELD = EMP_NO-PERNR
FNAME = ' '
PROGR = ' '
IMP_DECIMALS = '0'
IMPORTING
ERROR =
IFELD = EMP_NO1-PERNR
MESSG = ERR
MSGLN =
IF ( ERR-MSGID = '' ).
APPEND EMP_NO1 TO EMPNO1.
CLEAR EMP_NO1-PERNR.
ELSE.
MESSAGE I455(0) WITH 'Could not convert employee number'.
LEAVE TO SCREEN 0.
ENDIF.
ENDLOOP.
ENDIF.
ENDFORM. "GET_VALUE
*& Form GET_PERNR
text
FORM GET_PERNR.
SPLIT TEMP_NUM AT ',' INTO EMP_NO TEMP_NUM.
APPEND EMP_NO TO EMPNO.
CLEAR EMP_NO.
SEARCH TEMP_NUM FOR ','.
IF SY-SUBRC = 0.
PERFORM GET_PERNR.
ENDIF.
ENDFORM. "GET_PERNR
*& Form ERROR_MSG
text
--> p1 text
<-- p2 text
FORM ERROR_MSG.
IF SY-SUBRC <> 0.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
LANG = SY-LANGU
IMPORTING
MSG = MSG-MSG1.
APPEND MSG.
CLEAR MSG.
ENDIF.
ENDFORM. "ERROR_MSG
*& Form F_BDCDATA
text
FORM F_BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPMP50A' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=INS'.
PERFORM BDC_FIELD USING 'RP50G-PERNR'
INT_0015-PERNR.
PERFORM BDC_FIELD USING 'RP50G-TIMR6'
'X'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RP50G-CHOIC'.
PERFORM BDC_FIELD USING 'RP50G-CHOIC'
'0015'.
PERFORM BDC_DYNPRO USING 'MP001500' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'Q0015-BETRG'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'P0015-LGART'
'0077'. "CHANGE WAGE TYPE HERE
ALSO
PERFORM BDC_FIELD USING 'Q0015-BETRG'
INT_0015-BETRG.
PERFORM BDC_FIELD USING 'P0015-WAERS'
'INR'.
PERFORM BDC_FIELD USING 'P0015-BEGDA'
INT_0015-BEGDA.
PERFORM BDC_DYNPRO USING 'MP001500' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'P0015-LGART'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=UPD'.
PERFORM BDC_FIELD USING 'P0015-LGART'
'0077'. "CHANGE WAGE TYPE HERE
ALSO
PERFORM BDC_FIELD USING 'Q0015-BETRG'
INT_0015-BETRG.
PERFORM BDC_FIELD USING 'P0015-WAERS'
'INR'.
PERFORM BDC_FIELD USING 'P0015-BEGDA'
INT_0015-BEGDA.
ENDFORM. "F_BDCDATA
*& Form BDC_DYNPRO
text
-->P_0732 text
-->P_0733 text
FORM BDC_DYNPRO USING VALUE(P_0732) TYPE C
VALUE(P_0733) TYPE C.
CLEAR BDCDATA.
BDCDATA-PROGRAM = P_0732.
BDCDATA-DYNPRO = P_0733.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. " BDC_DYNPRO
*& Form BDC_FIELD
text
-->P_0755 text
-->P_0756 text
FORM BDC_FIELD USING VALUE(P_0755) TYPE C
VALUE(P_0756) TYPE C.
CLEAR BDCDATA.
BDCDATA-FNAM = P_0755.
BDCDATA-FVAL = P_0756.
APPEND BDCDATA.
ENDFORM. " BDC_FIELD
*& Form CAL_ALLOWANCE
text
FORM CAL_ALLOWANCE.
LOOP AT INT_PETROL1 INTO INT_PETROL.
IF INT_PETROL-TRFST = 'L1'.
INT_PETROL-PALLOWANCE = P_RATE * 100. "CHANGE TO SELECT WHEN
DISPLAY
ELSEIF INT_PETROL-TRFST = 'L2'.
INT_PETROL-PALLOWANCE = P_RATE * 150.
ELSEIF INT_PETROL-TRFST = 'L3'.
INT_PETROL-PALLOWANCE = P_RATE * 150.
ELSEIF INT_PETROL-TRFST = 'L4'.
INT_PETROL-PALLOWANCE = P_RATE * 200.
ELSEIF INT_PETROL-TRFST = 'L5'.
INT_PETROL-PALLOWANCE = P_RATE * 250.
ENDIF.
MODIFY INT_PETROL1 FROM INT_PETROL TRANSPORTING PALLOWANCE.
ENDLOOP.
ENDFORM. "CAL_ALLOWANCE
*& Form FILL_FIELDCAT
text
--> p1 text
<-- p2 text
FORM FILL_FIELDCAT.
INT_FIELDCAT-COL_POS = 1.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'PERNR'.
INT_FIELDCAT-SELTEXT_L = TEXT-005.
INT_FIELDCAT-OUTPUTLEN = 10.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 2.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'NAME'.
INT_FIELDCAT-SELTEXT_L = TEXT-006.
INT_FIELDCAT-OUTPUTLEN = 25.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 3.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'TRFST'.
INT_FIELDCAT-SELTEXT_L = TEXT-007.
INT_FIELDCAT-OUTPUTLEN = 5.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 4.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'PALLOWANCE'.
INT_FIELDCAT-SELTEXT_L = TEXT-008.
INT_FIELDCAT-OUTPUTLEN = 16.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
ENDFORM. " FILL_FIELDCAT
*& Form GET_EVENTS_ALV
text
--> p1 text
<-- p2 text
FORM GET_EVENTS_ALV.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 1
IMPORTING
ET_EVENTS = INT_EVENTS[]
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE INT_EVENTS INTO WS_EVENTS WITH KEY NAME =
SLIS_EV_TOP_OF_PAGE.
IF SY-SUBRC = 0.
WS_EVENTS-FORM = 'TOP'.
MODIFY INT_EVENTS FROM WS_EVENTS INDEX SY-TABIX.
ENDIF.
ENDFORM. " GET_EVENTS_ALV
*& Form TOP-OF-PAGE
text
FORM TOP.
*-- ALV Declarations
DATA: WS_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER TYPE SLIS_LISTHEADER.
*-- Title
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = TEXT-009.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = TITLE.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = ' '.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = ' '.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = WS_HEADER
I_LOGO = 'LOGO'.
ENDFORM. "TOP-OF-PAGE
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
Check these links -
http://help.sap.com/saphelp_erp2005vp/helpdata/en/8a/6a46347969e94be10000009b38f83b/frameset.htm
Re: INFOTYPE
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://www.sap-img.com/sap-hr.htm
HR abap
Go through the SAp doc for HR programming and start doing.
Refer this link
http://www.sapdevelopment.co.uk/fmodules/fmshr.htm
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://www.sapdevelopment.co.uk/hr/hrhome.htm
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
sites regarding hr-abap:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
These are the FAQ's that might helps you as well.
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.atomhr.com/library_full.htm
HR Long texts Upload
Look at the below link
BDC - hr maintain text
Please refer to the following sample program for accessing PCH LDB.
For concept to start with refer url:
http://www.sap-press.de/download/dateien/860/sappress_mysap_hr_technical_principles2.pdf -
Need help with my Pioneer dvd-rw dvr-115d. HLEP!!
Hello i need help with my G4, i havent been useing it for a while and i started using it again. As i was trying to burn a DVD it didnt read my cd at all even if i put a DVD in there it dont read it just come right back out.. on my mac it shows that is there but not reading . what can i do????!!! i need help with this..
PIONEER DVD-RW DVR-115D:
Firmware Revision: 1.18
Interconnect: ATAPI
Burn Support: Yes (Vendor Supported Drive)
Profile Path: /Library/DiscRecording/DeviceProfiles/PatchBurn-pioneerdvdrwdvr115d.drprof ile
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
this is what it say in the system profiler.
Power PC Mac os x 10.5.8The new user account didn't work?
Or, the firmware flash didn't work?
I would try reconnecting the data ribbon. It is cramped and difficult to get to, but it may be some corrosion or a poor connection causing the issue.
It's worth a try, as the DVR-115 is a good drive. They don't make them any more........
You can find an optical drive installation video (on the following page) to help you with your efforts:
http://eshop.macsales.com/installvideos/ -
Router's Web-based page not loaded correctly.. Need Help!!
I'm using WRT54G v2.2 router and recently i noticed tat i've flashed a wrong firmware which is WRT54GL version, so wat i did was i flash the original v2.2 firmware which i noticed it had not been updated since 2007... after i flashed the router and i log into the 192.168.1.1 webpage.. all the tabs and many options are missing as though the page was not loaded correctly or fully loaded and i cant even get into the management page and so on..
I really need help on this..Hold the reset button down for 30seconds and then release it. Unplug the power cable for 10 seconds. try accessing the set up page once again and see if it makes a difference.
-
Today i was listening to music and my zen micro just froze while playing and no buttons could be pressed and the lock button wasnt on. So i took the battery out and rebooted the player but it froze at the creative screen. I went home and i went to recovery mode and tried to reload the firmware but it said erasing firmware for more than 2 hours. So then i tried a format but it said formating for the same amount of time. I need help please. Also, recently i've had problems witht the headphone jack. When ever i would stick it in it would sound distorted and i would have to move it around until i got it to a certain spot to hear it good again. If anyone else has this problem please tell me. One more thing i had returned my other micro zen in for hard dri've probems and this was my new one do u think if i have to return in (hopefully not) that they would accept it.
If the functions in Rescue Mode aren't working properly then you need to contact Creative Support.
-
Need help accessing the router web page. I have been tol...
Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanksWhat router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM -
HI gurus,
I AM KISHORE i am SD consultant.here my client is asking to create some programmes. i need help in simple programmes so that as per that i can change the fiels as per my requirement.
i am in real big problem now .i know these are very simple programmes but i don't know ABC of programming.
can some one help me in this regard. this ABAP help is needed for me only for some time.
the requirement:
create program which will produce list with:
Materia number; Material description ; Valuation class, Standard price with curency and unit.
Select conditions:
Material number,
Plant,
Material type as mandatory
Material Group as mandatory,
LP/KD/MIP (LABOR) as mandatory,
Replenishment strategy (TEMPB) as mandatory,
Valuation class,
Flag for deletion-Client Level with initial value <> X (only materials without flag for deletion)
Simple List is enough
reagrds
kishoreHi
Eventhough i cant fullfill your complete requirement. I'm giving u a report performed by me in which most of the fields are covered ask any of abaper to make modifications in this report and change it to accordingly ur requirement. I think it will solve 80% of ur work
* tables
TABLES: ekko,ekbe,ekpo,ekkn,konh,konv,esll,ekbz,rseg,lfa1,j_1ipart1,
j_1igrxref.
TYPE-POOLS: slis.
*data definituon
DATA:
wa_ekko LIKE ekko,
wa_ekbe LIKE ekbe,
wa_ekkn LIKE ekkn,
wa_konp LIKE konp,
wa_ekpo LIKE ekpo,
wa_rbkp LIKE rbkp,
wa_j_1ipart1 LIKE j_1ipart1,
wa_j_1igrxref LIKE j_1igrxref,
wa_rseg LIKE rseg OCCURS 0 WITH HEADER LINE.
DATA: ws_vakey LIKE konh-vakey,
ws_kbetr LIKE konp-kbetr,
ws_kbetr1 LIKE konp-kbetr,
ws_kbetr2 LIKE konp-kbetr,
ws_ecs LIKE j_1igrxref-ecs,
ws_ebelp LIKE ekbz-ebelp,
ws_ebeln LIKE ekko-ebeln,
ws_belnr LIKE ekbe-belnr,
ws_beznk LIKE rbkp-beznk,
ws_wrbtr_f LIKE ekbz-wrbtr,
ws_rmwwr LIKE rbkp-rmwwr,
ws_rbkp_benz.
*internal tables
DATA: BEGIN OF int_outtab OCCURS 0,
lifnr LIKE ekko-lifnr, " vend no
name1 LIKE lfa1-name1, " vend name
werks LIKE ekpo-werks, " plant
ebeln LIKE ekko-ebeln, " po no
knumv LIKE ekko-knumv,
ebelp LIKE ekbe-ebelp,
matnr LIKE ekpo-matnr, " mat no
txz01 LIKE ekpo-txz01, " mat desceiption
kostl LIKE ekkn-kostl, " cost center
ps_psp_pnr LIKE ekkn-ps_psp_pnr, " WBS element
netwr LIKE ekpo-netwr,
" basic value (po)
kbetr LIKE konp-kbetr,
" excise value (po)
kwert_i LIKE konv-kwert,
" insurance value (po)
kwert_f LIKE konv-kwert,
" frieght value (po)
kwert_t LIKE konv-kwert,
" vat/tax value (po)
kwert_o LIKE konv-kwert,
" others (po)
kwert_total LIKE konv-kwert,
" total (po)
ecs LIKE j_1igrxref-ecs,
" excise (ap)
wmwst1 LIKE rbkp-wmwst1,
" tax amount (ap)
wrbtr_f TYPE ekbz-wrbtr,
" freight (ap)
wrbtr TYPE ekbz-wrbtr,
beznk LIKE rbkp-beznk,
" Unplanned cost (ap)
refwr_g TYPE ekbe-refwr,
" gross (ap)
rmwwr LIKE rbkp-rmwwr,
" Actual Invoice Total (ap)
buzei LIKE ekbz-buzei, "item for material doc
gjahr LIKE ekbe-gjahr,
tax LIKE ekbe-wrbtr, " tax (ap)
actual_total LIKE ekbe-wrbtr,
* belnr LIKE rseg-belnr,
belnr LIKE ekbe-belnr,
vakey LIKE konh-vakey,
cpudt LIKE ekbe-cpudt,
budat LIKE ekbz-budat,
belnr_ekbz LIKE ekbz-belnr, "to get excise value
* aedat LIKE ekpo-aedat,
bedat LIKE ekko-bedat,
waers LIKE lfm1-waers, " currency
END OF int_outtab.
DATA: int_konv LIKE konv OCCURS 0 WITH HEADER LINE,
* int_ekbe LIKE ekbe OCCURS 0 WITH HEADER LINE,
int_ekbz LIKE ekbz OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF int_konh OCCURS 0,
knumh LIKE konh-knumh,
kschl LIKE konh-kschl,
vakey LIKE konh-vakey,
END OF int_konh.
DATA: BEGIN OF int_konp OCCURS 0,
knumh LIKE konp-knumh,
kschl LIKE konp-kschl,
kbetr LIKE konp-kbetr,
END OF int_konp.
DATA: BEGIN OF int_ekkn OCCURS 0,
ebeln LIKE ekkn-ebeln,
ebelp LIKE ekkn-ebelp,
kostl LIKE ekkn-kostl,
ps_psp_pnr LIKE ekkn-ps_psp_pnr,
END OF int_ekkn.
DATA: BEGIN OF int_outtab1 OCCURS 0,
exbed LIKE j_1igrxref-exbed,
ecs LIKE j_1igrxref-ecs,
END OF int_outtab1.
DATA: BEGIN OF int_ekbe OCCURS 0,
ebelp LIKE ekbe-ebelp,
refwr LIKE ekbe-refwr,
wrbtr LIKE ekbe-wrbtr,
shkzg LIKE ekbe-shkzg,
END OF int_ekbe.
DATA: BEGIN OF int_total OCCURS 0,
ebeln LIKE ekko-ebeln,
ebelp LIKE ekbe-ebelp,
actual_total LIKE ekbe-wrbtr,
END OF int_total.
DATA: BEGIN OF int_excise OCCURS 0,
ebeln LIKE ekko-ebeln,
kbetr LIKE konp-kbetr,
END OF int_excise.
DATA: BEGIN OF int_rseg OCCURS 0,
ebeln LIKE rseg-ebeln,
ebelp LIKE rseg-ebelp,
lfbnr LIKE rseg-lfbnr,
matnr LIKE rseg-matnr,
lfgja LIKE rseg-lfgja,
belnr LIKE rseg-belnr,
ecs LIKE j_1igrxref-ecs,
beznk LIKE rbkp-beznk,
wrbtr_f LIKE ekbz-wrbtr,
rmwwr LIKE rbkp-rmwwr,
END OF int_rseg.
DATA: BEGIN OF int_rbkp OCCURS 0,
belnr LIKE rbkp-belnr,
beznk LIKE rbkp-beznk,
rmwwr LIKE rbkp-rmwwr,
tcode LIKE rbkp-tcode,
END OF int_rbkp.
****ALV list definintion
DATA: ws_cat TYPE slis_t_fieldcat_alv ,
int_cat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA: g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
g_custom_container TYPE REF TO cl_gui_custom_container.
*selection-screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 19(23) text-002.
SELECT-OPTIONS: s_lifnr FOR ekko-lifnr obligatory.
*PARAMETERS:p_lifnr LIKE ekko-lifnr .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 25(17) text-006.
*PARAMETERS:p_ebeln LIKE ekko-ebeln obligatory.
SELECT-OPTIONS:s_ebeln FOR ekko-ebeln .
SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT 25(23) text-003.
*PARAMETERS:p_ekorg LIKE ekko-ekorg.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT 25(20) text-004.
*PARAMETERS:p_werks LIKE ekpo-werks obligatory.
*SELECT-OPTIONS: S_werks FOR ekpo-werks obligatory.
SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT 25(23) text-005.
*SELECT-OPTIONS:s_bedat FOR ekko-bedat.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
PERFORM get_data.
PERFORM field_catalog.
PERFORM display_data.
END-OF-SELECTION.
*& Form get_data
* text
FORM get_data.
* start of Vender details
***vender no, vender name, po no,service/mat no, service/mat description
SELECT ekko~lifnr ekko~ebeln ekko~knumv ekko~bedat
ekpo~werks ekpo~matnr ekpo~txz01 ekpo~werks
ekpo~netwr
* ekpo~aedat
ekbe~ebelp ekbe~belnr
lfa1~name1
INTO CORRESPONDING FIELDS OF TABLE int_outtab
FROM ( ( ( ekko
JOIN ekbe ON ekbe~ebeln = ekko~ebeln AND
ekbe~vgabe = '2' )
JOIN ekpo ON ekpo~ebeln = ekko~ebeln AND
ekpo~ebelp = ekbe~ebelp )
JOIN lfa1 ON lfa1~lifnr = ekko~lifnr )
WHERE
* ekko~lifnr = P_lifnr AND
* ekko~ebeln IN S_ebeln AND
** ekpo~werks IN S_werks AND
ekbe~vgabe = '2'.
***WBS/Cost center
SELECT ebeln ebelp kostl ps_psp_pnr FROM ekkn INTO int_ekkn
FOR ALL ENTRIES IN int_outtab
WHERE ebeln = int_outtab-ebeln AND
ebelp = int_outtab-ebelp.
APPEND int_ekkn.
ENDSELECT.
LOOP AT int_outtab.
ON CHANGE OF int_outtab-ebeln OR int_outtab-ebelp.
LOOP AT int_ekkn WHERE ebeln = int_outtab-ebeln AND
ebelp = int_outtab-ebelp.
IF int_ekkn-kostl <> ' '.
MOVE int_ekkn-kostl TO int_outtab-kostl.
ELSE.
MOVE int_ekkn-ps_psp_pnr TO int_outtab-kostl.
" int_outtab-ps_psp_pnr.
ENDIF.
ENDLOOP.
MODIFY int_outtab.
ENDON.
ENDLOOP.
*end of Vender details*****
*******Start of calculation of PO
*****Excise calculation of po
LOOP AT int_outtab.
CONCATENATE int_outtab-werks int_outtab-lifnr int_outtab-matnr INTO
ws_vakey.
MOVE ws_vakey TO int_outtab-vakey.
MODIFY int_outtab.
ENDLOOP.
LOOP AT int_outtab.
* ON CHANGE OF int_outtab-ebeln OR int_outtab-vakey.
ON CHANGE OF int_outtab-ebelp.
SELECT knumh kschl vakey FROM konh INTO int_konh
* FOR ALL ENTRIES IN int_outtab
WHERE vakey = int_outtab-vakey AND
datab <= int_outtab-bedat AND
datbi > int_outtab-bedat AND
( kschl = 'JMOP' OR kschl = 'JEC1' ).
SELECT knumh kschl kbetr FROM konp INTO int_konp
WHERE knumh = int_konh-knumh .
IF int_konp-kschl = 'JMOP'.
ws_kbetr = int_konp-kbetr / 1000 * int_outtab-netwr.
ws_kbetr1 = ws_kbetr.
ENDIF.
IF int_konp-kschl = 'JEC1'.
ws_kbetr2 = int_konp-kbetr / 1000 * ws_kbetr1.
ENDIF.
ws_kbetr = ws_kbetr + ws_kbetr2.
ENDSELECT.
ENDSELECT.
ENDON.
* ENDON.
MOVE ws_kbetr TO int_outtab-kbetr.
MODIFY int_outtab.
CLEAR: ws_kbetr, ws_kbetr1, ws_kbetr2.
ENDLOOP.
LOOP AT int_outtab.
* ON CHANGE OF int_outtab-ebeln OR int_outtab-vakey.
int_excise-kbetr = int_outtab-kbetr.
int_excise-ebeln = int_outtab-ebeln.
APPEND int_excise.
* ENDON.
ENDLOOP.
LOOP AT int_outtab.
ON CHANGE OF int_outtab-ebeln.
LOOP AT int_excise WHERE ebeln = int_outtab-ebeln.
ws_kbetr = ws_kbetr + int_excise-kbetr.
ENDLOOP.
ENDON.
int_outtab-kbetr = ws_kbetr.
MODIFY int_outtab.
CLEAR ws_kbetr.
ENDLOOP.
***** Insurance, Freight,Vat/ST, Other, Total***********
LOOP AT int_outtab.
ON CHANGE OF int_outtab-ebelp OR int_outtab-ebeln.
CLEAR int_konv.
SELECT * FROM konv INTO CORRESPONDING FIELDS OF int_konv
WHERE knumv = int_outtab-knumv AND
kposn = int_outtab-ebelp AND
( ( kschl <> 'RA00' )
AND ( kschl <> 'RA01' ) AND ( kschl <> 'RB00' )
AND ( kschl <> 'PBXX' ) AND ( kschl <> 'PB00' )
AND ( kschl <> 'RC00' ) AND ( kschl <> 'RL01' )
AND ( kschl <> 'ZC00' ) AND ( kschl <> 'ZA00' )
AND ( kschl <> 'ZA01' ) AND ( kschl <> 'HB01' )
AND ( kschl <> 'ZBED' ) AND ( kschl <> 'ZAED' )
AND ( kschl <> 'ZSED' ) AND ( kschl <> 'ZAE1' )
AND ( kschl <> 'ZSE1' ) AND ( kschl <> 'ZCEX' )
AND ( kschl <> 'ZPRO' ) AND ( kschl <> 'ZTRD' )
AND ( kschl <> 'ZPK4' ) AND ( kschl <> 'ZSTX' )
AND ( kschl <> 'ZASS' ) AND ( kschl <> 'ZJCD' )
AND ( kschl <> 'HB00') ).
APPEND int_konv.
ENDSELECT.
ENDON.
ENDLOOP.
LOOP AT int_outtab.
ON CHANGE OF int_outtab-ebelp OR int_outtab-knumv.
LOOP AT int_konv WHERE kposn = int_outtab-ebelp AND
knumv = int_outtab-knumv.
* lifnr = int_outtab-lifnr.
***** tax
IF ( ( int_konv-kschl = 'NAVS' ) OR ( int_konv-kschl = 'NAVM' )
int_outtab-kwert_t = int_outtab-kwert_t + int_konv-kwert.
ELSE.
*****freight
IF ( ( int_konv-kschl = 'FRA1' ) OR ( int_konv-kschl = 'FRB1'
OR ( int_konv-kschl = 'FRC1'
int_outtab-kwert_f = int_outtab-kwert_f + int_konv-kwert.
ELSE.
*****insurance
IF ( ( int_konv-kschl = 'ZGIN' ) OR ( int_konv-kschl =
'ZIN2' ) ).
int_outtab-kwert_i = int_outtab-kwert_i + int_konv-kwert.
ELSE.
****others
IF NOT ( ( int_konv-kschl = 'NAVS' ) OR (
int_konv-kschl = 'NAVM' )
OR ( int_konv-kschl = 'FRA1' ) OR (
int_konv-kschl = 'FRB1' )
OR ( int_konv-kschl = 'FRC1' ) OR (
int_konv-kschl = 'ZGIN' )
OR ( int_konv-kschl = 'ZIN2' ) OR (
int_konv-kschl = 'RA00' )
OR ( int_konv-kschl = 'RA01' ) OR (
int_konv-kschl = 'RB00' )
OR ( int_konv-kschl = 'PBXX' ) OR (
int_konv-kschl = 'PB00' )
OR ( int_konv-kschl = 'RC00' ) OR (
int_konv-kschl = 'RL01' ) ).
int_outtab-kwert_o = int_outtab-kwert_o +
int_konv-kwert.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
****total
int_outtab-kwert_total = int_outtab-kwert_t
+ int_outtab-kwert_f
+ int_outtab-kwert_i
+ int_outtab-kwert_o
+ int_outtab-netwr.
ENDON.
MODIFY int_outtab.
ENDLOOP.
******End of calculation of PO
*start of calculation for actual payment
*****Excise
sort int_outtab by ebelp ebeln.
LOOP AT int_outtab.
ON CHANGE OF int_outtab-ebelp OR int_outtab-ebeln.
SELECT * FROM rseg INTO CORRESPONDING FIELDS OF int_rseg
* FOR ALL ENTRIES IN int_outtab
WHERE ebeln = int_outtab-ebeln AND
ebelp = int_outtab-ebelp.
APPEND int_rseg.
ENDSELECT.
ENDON.
ENDLOOP.
sort int_rseg by ebelp lfbnr matnr.
LOOP AT int_rseg.
ON CHANGE OF int_outtab-ebelp OR int_rseg-lfbnr OR int_rseg-matnr OR
int_rseg-lfgja.
SELECT * FROM j_1ipart1 INTO wa_j_1ipart1
WHERE mblnr = int_rseg-lfbnr AND
mjahr = int_rseg-lfgja AND
matnr = int_rseg-matnr.
ON CHANGE OF wa_j_1ipart1-mblnr OR wa_j_1ipart1-zeile.
SELECT * FROM j_1igrxref INTO wa_j_1igrxref
WHERE mblnr = wa_j_1ipart1-mblnr AND
zeile = wa_j_1ipart1-zeile.
IF sy-subrc EQ 0.
ws_ecs = ws_ecs + wa_j_1igrxref-exbed + wa_j_1igrxref-ecs.
ENDIF.
ENDSELECT.
ENDON.
ENDSELECT.
ENDON.
MOVE ws_ecs TO int_rseg-ecs.
MODIFY int_rseg TRANSPORTING ecs.
CLEAR: ws_ecs.
ENDLOOP.
LOOP AT int_outtab.
ON CHANGE OF int_outtab-ebeln.
LOOP AT int_rseg WHERE ebeln = int_outtab-ebeln.
ws_ecs = ws_ecs + int_rseg-ecs.
ENDLOOP.
ENDON.
MOVE ws_ecs TO int_outtab-ecs.
MODIFY int_outtab TRANSPORTING ecs.
CLEAR ws_ecs.
ENDLOOP.
******unplanned costs and actual_invoice_total
SORT int_rseg BY belnr.
LOOP AT int_rseg .
ON CHANGE OF int_rseg-belnr.
SELECT belnr beznk rmwwr tcode FROM rbkp INTO int_rbkp
WHERE belnr = int_rseg-belnr .
APPEND int_rbkp.
ENDSELECT.
ENDON.
ENDLOOP.
SORT int_rseg BY belnr.
SORT int_rbkp BY belnr.
LOOP AT int_rseg.
ON CHANGE OF int_rseg-ebeln OR int_rseg-belnr.
LOOP AT int_rbkp WHERE belnr = int_rseg-belnr.
IF int_rbkp-tcode = 'MR8M'.
int_rbkp-rmwwr = int_rbkp-rmwwr * ( - 1 ).
int_rbkp-beznk = int_rbkp-beznk * ( - 1 ).
ENDIF.
ws_beznk = ws_beznk + int_rbkp-beznk.
ws_rmwwr = ws_rmwwr + int_rbkp-rmwwr.
ENDLOOP.
ENDON.
MOVE ws_beznk TO int_rseg-beznk.
MOVE ws_rmwwr TO int_rseg-rmwwr.
MODIFY int_rseg.
CLEAR: ws_rmwwr, ws_beznk.
ENDLOOP.
LOOP AT int_outtab.
ON CHANGE OF int_outtab-ebeln.
LOOP AT int_rseg WHERE ebeln = int_rseg-ebeln.
ws_beznk = ws_beznk + int_rseg-beznk.
ws_rmwwr = ws_rmwwr + int_rseg-rmwwr.
ENDLOOP.
ENDON.
MOVE ws_beznk TO int_outtab-beznk.
MOVE ws_rmwwr TO int_outtab-rmwwr.
MODIFY int_outtab.
CLEAR: ws_rmwwr, ws_beznk.
ENDLOOP.
*freight of actual payment
sort int_rseg by belnr ebelp.
LOOP AT int_rseg.
ON CHANGE OF int_rseg-belnr or int_rseg-ebelp..
SELECT * FROM ekbz INTO CORRESPONDING FIELDS OF int_ekbz
WHERE ebeln = int_rseg-ebeln AND
belnr = int_rseg-belnr AND
ebelp = int_rseg-ebelp AND
vgabe = '2' .
IF int_ekbz-shkzg = 'H'.
int_ekbz-wrbtr = int_ekbz-wrbtr * ( - 1 ).
ENDIF.
int_rseg-wrbtr_f = int_rseg-wrbtr_f + int_ekbz-wrbtr.
ENDSELECT.
ENDON.
MODIFY int_rseg.
CLEAR int_rseg-wrbtr_f.
ENDLOOP.
sort int_rseg by ebelp.
LOOP AT int_outtab.
ON CHANGE OF int_outtab-ebeln OR int_outtab-ebelp.
LOOP AT int_rseg WHERE ebeln = int_outtab-ebeln AND
ebelp = int_outtab-ebelp.
ws_wrbtr_f = ws_wrbtr_f + int_rseg-wrbtr_f.
ENDLOOP.
ENDON.
MOVE ws_wrbtr_f TO int_outtab-wrbtr_f.
MODIFY int_outtab TRANSPORTING wrbtr_f.
CLEAR ws_wrbtr_f.
ENDLOOP.
**tax and gross amt of actual payment
LOOP AT int_outtab.
ON CHANGE OF int_outtab-ebelp OR int_outtab-ebeln.
" or int_outtab-belnr.
SELECT ebelp refwr wrbtr shkzg FROM ekbe INTO int_ekbe
WHERE ebelp = int_outtab-ebelp AND
ebeln = int_outtab-ebeln AND
vgabe = '2' .
IF int_ekbe-shkzg = 'H'.
int_ekbe-refwr = int_ekbe-refwr * ( - 1 ).
int_ekbe-wrbtr = int_ekbe-wrbtr * ( - 1 ).
ENDIF.
int_outtab-refwr_g = int_outtab-refwr_g + int_ekbe-refwr.
int_outtab-tax = int_outtab-tax + ( int_ekbe-wrbtr -
int_ekbe-refwr ).
ENDSELECT.
ENDON.
MODIFY int_outtab.
CLEAR int_outtab-refwr_g.
CLEAR int_outtab-tax.
ENDLOOP.
****total
LOOP AT int_outtab.
ON CHANGE OF int_outtab-ebelp OR int_outtab-ebeln.
int_outtab-actual_total = int_outtab-actual_total
+ int_outtab-ecs
+ int_outtab-wrbtr_f
+ int_outtab-tax
+ int_outtab-beznk
+ int_outtab-refwr_g.
int_total-actual_total = int_outtab-actual_total.
int_total-ebelp = int_outtab-ebelp.
int_total-ebeln = int_outtab-ebeln.
APPEND int_total.
ENDON.
ENDLOOP.
*end of calculation for actaul payment
*************Modification in internal table*****
LOOP AT int_outtab.
IF int_outtab-ebelp = ws_ebelp AND
int_outtab-ebeln = ws_ebeln.
int_outtab-netwr = 0.
MODIFY int_outtab.
ENDIF.
ws_ebelp = int_outtab-ebelp.
ws_ebeln = int_outtab-ebeln.
ENDLOOP.
LOOP AT int_outtab.
IF int_outtab-netwr IS INITIAL.
DELETE int_outtab INDEX sy-tabix.
ENDIF.
ENDLOOP.
LOOP AT int_outtab.
ON CHANGE OF int_outtab-ebeln.
LOOP AT int_total WHERE ebeln = int_outtab-ebeln.
int_outtab-actual_total = int_outtab-actual_total
+ int_total-actual_total.
ENDLOOP.
ENDON.
MODIFY int_outtab.
ENDLOOP.
LOOP AT int_outtab.
SELECT SINGLE * FROM lfm1 INTO CORRESPONDING FIELDS OF int_outtab
WHERE lifnr = int_outtab-lifnr.
MODIFY int_outtab.
ENDLOOP.
********** end of modification*********
ENDFORM. "get_data
*& Form field_catalog
* text
FORM field_catalog.
***vender no
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'LIFNR'.
int_cat-reptext_ddic = 'Vender No'.
APPEND int_cat TO ws_cat.
*vender name
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'NAME1'.
int_cat-reptext_ddic = 'Vender Name'.
APPEND int_cat TO ws_cat.
** PO No
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'EBELN'.
int_cat-reptext_ddic = 'PO No'.
APPEND int_cat TO ws_cat.
** Mat No
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'MATNR'.
int_cat-reptext_ddic = 'Mat No'.
APPEND int_cat TO ws_cat.
** Matdescription
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'TXZ01'.
int_cat-reptext_ddic = 'Mat description'.
APPEND int_cat TO ws_cat.
**WBS/Cost center
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'KOSTL'.
int_cat-reptext_ddic = 'WBS/Cost center'.
APPEND int_cat TO ws_cat.
**Currency
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'WAERS'.
int_cat-reptext_ddic = 'Currency'.
APPEND int_cat TO ws_cat.
**Basic
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'NETWR'.
int_cat-reptext_ddic = 'Basic'.
APPEND int_cat TO ws_cat.
**Excise
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'KBETR'.
int_cat-reptext_ddic = 'Excise'.
APPEND int_cat TO ws_cat.
**Insurance
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'KWERT_I'.
int_cat-reptext_ddic = 'Insurance'.
APPEND int_cat TO ws_cat.
**Frieght
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'KWERT_F'.
int_cat-reptext_ddic = 'Frieght'.
APPEND int_cat TO ws_cat.
**VAT/ST
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'KWERT_T'.
int_cat-reptext_ddic = 'VAT/ST'.
APPEND int_cat TO ws_cat.
**Other
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'KWERT_O'.
int_cat-reptext_ddic = 'Others'.
APPEND int_cat TO ws_cat.
**Total
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'KWERT_TOTAL'.
int_cat-reptext_ddic = 'Total'.
APPEND int_cat TO ws_cat.
***Excise
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'ECS'.
int_cat-reptext_ddic = 'Excise'.
APPEND int_cat TO ws_cat.
*****Freight
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'WRBTR_F'.
int_cat-reptext_ddic = 'Freight'.
APPEND int_cat TO ws_cat.
*****Tax
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'TAX'.
int_cat-reptext_ddic = 'Tax'.
APPEND int_cat TO ws_cat.
***Unplanned Del Cost
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'BEZNK'.
int_cat-reptext_ddic = 'Unplanned Del Cost'.
APPEND int_cat TO ws_cat.
****Gross
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'REFWR_G'.
int_cat-reptext_ddic = 'Gross'.
APPEND int_cat TO ws_cat.
**Total
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'ACTUAL_TOTAL'.
int_cat-reptext_ddic = 'Total'.
APPEND int_cat TO ws_cat.
**Actual Invoice Total
int_cat-tabname = 'INT_OUTTAB'.
int_cat-fieldname = 'RMWWR'.
int_cat-reptext_ddic = 'Actual Invoice Total'.
APPEND int_cat TO ws_cat.
ENDFORM. "field_catalog
*& Form display_data
* text
FORM display_data.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'Z_MM_TEST1'
it_fieldcat = ws_cat[]
TABLES
t_outtab = int_outtab
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. "display_data
Reward for all helpfull answers
Regards
Pavan -
Need help with a terminal command
Ever since Lion, or maybe even earlier, I am fighting a losing battle against memory leaks on my MacBook Pro. Safari for example takes over time 2GB+ for just 2 or 3 tabs open with almost no extensions active. Really strange.
Someone told me about the "purge" command in Terminal to free some of the sequestered memory, so I am doing this a few times a day to be able to use Photoshop, Keynote, Premiere and other stuff concurrently without opening and closing apps like I did 10 or 15 years ago, remember those days?
So here are my 2 questions:
Will this frequent "purge" command harm anything in the long run?
If no, is it possible to automate this "purge" Terminal action somehow? Maybe a desktop icon to click, or fully automated? I am a designer, not a coder, so I would need help with that.
Thank you for your input!
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B27Hello, do any modifier keys work, like Optio/alt?
Could you have Firmware password protection in Mac OS X ...
http://support.apple.com/kb/HT1352
It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
Force Removing Password Protection
1) Add or remove DIMMs to change the total amount of RAM in the computer.
2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
http://www.securemac.com/openfirmwarepasswordprotection.php -
NEED HELP!!! with my Micro Photo
i need help i was having problems with my computer recognizing my Micro Photo so i was in to recovery menu so then i accidentally hit the reload firmware option and now i cant get it to work it only goes onto the Recovery Menu and i cant get the firmware updater to work and i cnat find no files of the firmware itself...but the weird thing is i can access the Micro Photo itself through my computer and browse it but idk wat to do some plzzz help me
themagooshow,
You don't need USB2.0 but you will need to have at least Service Pack for your Windows XP and Windows Media Player 0 installed.
Jason -
I have a 13 inch MacBook Pro (2009). Recently I bought an extended hard drive because I had used up the memory on my iDisk. As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down. Once I hooked up my Pro to the power cord & logged in, the "White Screen of Death" appeared on the home display. Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains. I need help in determining the cause of this issue & the steps I'll need to take in order to resolve this. I love my Pro, all my documents, photos & music are on it & the last thing I want to do is kill my wallet by buying a new Pro. So could someone on here please help me? It would be greatly appreciated & I thank you in advance!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.
Maybe you are looking for
-
Issue in workflow mailer configuration
Hi all, I have to configure notification mailer, for that I have an IP address of smtp server and an email username and password. Using these 3 details I can configure the mail in MS Outlook and send/recieve mails. When I give the same details
-
How can you tell how much space is taken by checked items?
I have a large iTunes library (over 270 gb) and managed what goes onto my 160 gb iPod using the checked items. It took me a long time to get it right and I would make changes (unchecking items) to accomodate new songs as I loaded them. Somehow rece
-
Creative Zen Portable Media Center + Windows 7 = Good Stuff
Found my old Creative Zen Portable Media Center the other day while cleaning. I had put it aside since I found the process of moving/converting AVIs to it really cumbersome. Just for fun I hooked it up to my new laptop running Windows 7. It found the
-
How to add new rows to LOV dynamically?
We have requirement as follows: in a multirow region, each row has fields like from_serial and to_serial. A serial can have state (defined but not used/In stores) and status (Good/Bad). Each field is associated with LOV that lists 'Defined but not us
-
I can't print tabloid 11x17 on my 9650 deskjet, help!
need complete install software for hp9650 that works with windows 7, I cant print tabloid 11x17 help