C7 Firmware Question

I have an C7 and my product code is 059d6t1, i don't get pr2.0 update from NSU or ovi suite.I still using pr1.1.Any Nokia developer willing to help me?

Maybe it is not available yet in your country.
Nokia C7-00 Symbian Belle RM-675

Similar Messages

Mountain Lion / EFI Firmware Question

Hello All,
I have a straightforward question. I have a Mid-2009 15" 2.53ghz MacBook Pro, that currently has Lion installed on it. Last year, I wanted to upgrade the hard drive, encountered the EFI Firmware 1.7 issue, downgraded it to 1.6, and everything works fine now.
My Question: I want to upgrade to Mountain Lion, but dont want my hard drive issue to reemerge: Does EFI 1.7 automatically install as part of the Mountain Lion install? Can I upgrade OS X without disabling my machine's abililty to have a hard drive?
Thank you!
Jeremy.

I really appreciate any responses or opinions. I have found the Apple Support communities to be amazingly helpful so far.
Thank you again!

Stupid firmware question

Hi,
I have a question. I'm pretty sure I know the answer but I just want to put my mind at rest, or prepare in the event that I have to do something.
I'm awaiting an install disk of OS 9.2 before I eventually install the OS 10.3 disks, which are sitting next to me (quite frustrating). I know that I need to install firmware before installing 10.3. Do I install 9.2 and then get online and add firmware. I just want to make sure I don't add the firmware before I add 9.2.
Also, does someone happen to have the link to the firmware. I think it's on this Apple site, but I seem to have lost the link.
Thanks!

This document explains which one(s) and has links to the firmware download(s):
58174- Power PC-based iMac: When to install available updates
Download the firmware anytime. DO print out the instruction sheet. It's tricky.
You run the firmware updater under OS 9, and it pre-installs the firmware re-writer onto your Hard Drive. Then you re-boot and the firmware re-writer does its magic -- if and when you press the right buttons at the right times. If you miss, you have to start over at step 1.

Zen Extra 30GB Firmware Question.

I'm still with the original firmware and i like it. The only thing is that it doesn't have removable storage. I was wondering if there is any firmware that can make this happen because i would like to be able to connect to other computer without having to install everything. Also if it is possible to get removable storage will i need to install the drivers and programs on the computer i'm looking to transfer files from? And more question if there is a firmware with this option and i use it will i be able to go back to the original one if i don't like the audio quality?
Thank you for reading.
PS I don't want the playsforsure firmware either.

There is no removable storage option for the Zen Xtra. If you want to use the player on another PC, you will have to install the drivers and an application to use it.
The new MTP/PlaysForSure firmware makes connecting to other PCs (provided they have WindowsXP and WMP0) easier, but this firmware is not downgradable so be sure you want to have it before you install it, as you cannot reverse this procedure.
Cat

IDRAC 6 Express - Update Firmware Question

Hello,
does anyone know if updating the iDRAC 6 Express firmware via the web gui causes any issues? I know it needs to reset itself. But I am wondering if it requires a full reboot or does the NIC reboot? Thanks.

I posted a more general question about this is this post (http://community.spiceworks.com/topic/1087984-do-i-really-need-workgroup-agent-license-for-shoretel?.... ) , but unfortunately, it kind of went cold. So, I am reposting with a more condensed question. We have a group of employees that will be hot desking on their phones and will also be using Communicator. I want them to always be logged into a workgroup which I understand canbe done fromDirector. My question is,do the users that are logged in via Director stay logged in when they hot desk from phone to phone? Assuming that is the case, do I need workgroup access licenses if they are never going to be logged out of the workgroup?

UCS Firmware Question

Hi:
Just want a definitive answer to the following question:
1. If my FInterconnect and IOM are having a "lower' firmware version than my UCS Blades (CIMC, BIOS & Adapter) assuning they are all at 1.4(3#) level, will the FI "upgrade" the firmwares on UCS Blade automatically?
2. If my FInterconnect and IOM are having a "higher' firmware version than my UCS Blades (CIMC, BIOS & Adapter) assuning they are all at 1.4(3#) level, will the FI "downgrade" the firmwares on UCS Blade automatically?
I remember someone from Cisco told me before that the downgrade or upgrade will happen automatically or I am wrong.
Thanks.
SiM

The Correct Answers icon is to highlight a response to a Post that was marked by the Poster as helpful.
We appreciate it when people respond to quesitons, that the person who posts the question (or even others) mark them with a star rating.
Robert

Firmware question regarding the HP NC522SFP

Hi
Yesterday I updated the firmware on my NC522SFP NICs to the newest one availiable (4.0.593), but I have a question that I need some help answering. Why does the firmware update utility say that my active firmware is either of the old nor the new firmware? Take look at this:
Before the update:
C:\Users\Administrator\Desktop\Drivers\NC522SFP\Firmware\Extracted>nxflash_x64.exe -i "Ethernet 2" --info
Board Type                 : 0x26 (HP NC522SFP Dual Port 10GbE Server Adapter)
Board Chip Rev             : B2
Serial Id                  : [Personal Information Removed]
Efuse ID                   : 0x4e424d3530303e14
Firmware version(on Flash) : 4.0.579
Active Firmware version    : 4.0.590
Driver version             : 5.3.27
BIOS version               : 2.1.0
MAC Addr 0                 : 80:C1:6E:A9:61:78
Subsystem ID               : 0x705b103c
PXE Status 0               : Enabled
WOL Status 0               : Enabled
NCSI Status                : Enabled
After the update:
C:\Users\Administrator\Desktop\Drivers\NC522SFP\Firmware\Extracted>nxflash_x64.exe -i "Ethernet 2" -info
Board Type                 : 0x26 (HP NC522SFP Dual Port 10GbE Server Adapter)
Board Chip Rev             : B2
Serial Id                  : [Personal Information Removed]
Efuse ID                   : 0x4e424d3530303e14
Firmware version(on Flash) : 4.0.593
Active Firmware version    : 4.0.590
Driver version             : 5.3.27
BIOS version               : 2.1.0
MAC Addr 0                 : 80:C1:6E:A9:61:78
Subsystem ID               : 0x705b103c
PXE Status 0               : Enabled
WOL Status 0               : Enabled
NCSI Status                : Enabled
OS is 2012 R2 and driver version is the "HP QLogic P3P Multifunction Driver for Windows Server 2012 (American, International)" - HP QLogic P3P Multifunction Driver for Windows Server 2012 (American, International)
Where does the Active Firmware come from? It seems like there is a bundled firmware file within the driver?
Thanks in advance
BR
Dfir

Hi dfir
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
Thank you
Omar
I Work for HP

Firmware question for Color LaserJet: Two computers on my network, Win XP and Win 7. Does it matter?

I don't understand firmware, but I know I needed to update my CP2025dn printer's firmware. I used my older computer to do this. If I had used my newer computer with Windows 7, would this affect my printing from either computer? Thanks.

I have tried to install my HP color laserjet 2605 dn on my windows 7 operating system and I get an administrator error

5800 firmware question

Hi all,
a friend of mine has an 5800 and as soon as she bought it she tried to upgrade the firmware to version 40 (ovi suite said update was availiable). However, halfway through the update failed and the phone crashed and does not switch on anymore. The thing is it was not the pc's fault cause she succesfully uprgaded the firmware for both a n96 and n97 before. Do you know if she will have to pay for upraging and fixing her phone at nokia stores?
N95,N81,N96, N97
Solved!
Go to Solution.

If she has not done anything to it that could void the warranty, this should be fixed on warranty.
Have she tried to do a hard reset to see if it makes the phone boot? This will delete a clean your C memory, but it's worth a try if her phone wont boot at all. Pres and hold call-end-camerabutton while turning it on. Keep holding them untill handshakescreen is finnished.

WRT54G-Need to reconnect every day / firmware question

So each day my router stops connecting to the internet. I go through the same troubleshooting wizard, and each time all I do is unplug and plug back in the router as per it's directions. While this works, I don't want to do it every day. I'm trying to download the firmware for it, but I guess I'm not used to downloading firmware for things because the download is trying to run on a flash player on my computer >. I thought they were supposed to be executables? T.I.A. all.

Well, I updated the firmware, but still it has reset again today. The usual message I get when I open Easylink Advisor is "Different Network Detected". It can't connect to the internet, and I need to setup my network again, detecting my router, entering Network Name and unplugging the power so it will find it again. This computer doesn't connect to it wirelessly, it's a direct connection, and none of the cords and cables are ever touched, all of them are always plugged in. Nothing is being done wrong, it connects fine until one point during the day then it just stops and I need to go through the setup again. Anybody recognize the problem? Thanks.

Urgent firmware question (nokia E72)

i just update my nokia e72 firmware to 031.023...
but don have chinese in it....
do this new firmware got chinese + english version?
if got how i gonna to flash back to get it?

The product code of your device determines the language support for the firmware update. If you want to change the languages, you have to bring it in at a Nokia Care Point. Remember though, that at the next firmware update, the languages will be set to the original product code.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Wrt 150 n v1.1 firmware question --which one?

Release Date    : July 11, 2007
Current Firmware : 1.01.9
Product PartNo   : WRT150N ver. 1.x
or
Release Date    : July 11, 2007
Current Firmware : 1.51.3
Product PartNo   : WRT150N ver. 1.x
I bought in canada

The firmware should be 1.01.9....it will definately work!!!

Power Mac G4 400 AGP boot from CD/firmware question

Hello-
What is the firmware that I need for 9.0.4? I have 9.0.4 installed, but I want to erase and do a clean install and then move on to 9.1 and on. My system profiler says that my BootRom is 3.2.6f1.
I'm trying to boot from a CD (via inernal CD drive) and I'm not having any luck and I'm wondering if it's a firmware problem. My machine displays the start up disk on the desktop and will open its contents, so it seems that the cd drive is ok. When I hit the apple dropdown menu and restart, I press the "C" and all I get is grey. I get the start up chime, but then grey. I also tried the Start up disk function and was able to choose the OS disk for start up, but to no avail.
My start up disks did not come with the machine, but they are Apple G4 9.0.4 and the person I bought them from said they were intended for a G4 400 AGP computer, which I have. I might add that I have the 9.0.4power pc enabler installed as this was a school machine networked for school use. i don't know if this would make any difference. The problem may be the disks, but obviously, I'm hoping not.
Any help would be big help, thanks in advance.

Hi, veesh678 -
Early models of the G4 (AGP) models came with OS 8.6; later models came with an installer for a model-specific version of OS 9.0.4. The latter disk will have a blue-gray label, be named "Power Mac G4" with a subtitle "Software Install", and has a part number of 691-2657-A (the part number will be in fine print on the right-hand side of the label).
Non-current firmware will not preclude the machine from booting to that CD; a retail OS 9.0.4 Install CD (white label, gold 9, no model named) probably will not work, although a retail OS 9.1 or 9.2.1 Install CD should work fine.
The current firmware version for the G4 (AGP) model is v. 4.2.8, which can be downloaded from this article -
Article #120068 - G4 Firmware Update 4.2.8
Note that to install that version the machine must be booted to OS 9.1 or OS 9.2.x from its hard drive, and the firmware update must be run from the same hard drive.
Before installing firmware update v. 4.2.8, download and run DIMM First Aid (it's a free download) to verify the compliance of the RAM in the machine.

Nokia 5530...firmware question? upgrade 11.0.054 ...

I bought my Nokia 5530 from Dell with product code...0591858
Phone came with 11.xx.xx.. firmware version.
When I try updating firmware it doesn't allow me to do an update to 20.0.080 version. Is this common issue?
Enter your product code:0591858
Go
Latest available software for Nokia 5530XpressMusic, product code 0591858
Version: 11.0.054
Compare numbers
If this version is greater than your current software version, update now to get the latest features, applications and improvements. Go to Nokia Software Updater download

This means V20 is not available for your phone yet. Nokia releases updates in phases for all the different codes. They may not have gotten round to your code just yet.

IPod Touch Third Generation 8GB Firmware Question

What specific firmware file does this certain model have. I've had problems with it and when I try to restore it using shift+click and choose the iPod3,13.1.3_7E18Restore file which I used for my brother's Third Geberation 32GB it says not compatible or something like that. Why is that?

I have the same problem. I have accidently upgrade my 8gb(MC) 3rd gen Ipod touch to Ipod2.1 4.0 firmware. So, how can i get back to Ipod3.1 4.0? I hv try restore to the corrct firmware but it said the same thing as above. Help?

CT4760 drivers and firmware questions. PLEASE HE

I've searched the board and read the FAQ, but if the answer to my question is there, I
didn't recognize it. I have SoundBlaster Li've! Platinum installed in a Windows 98
machine. I am going to do a clean install of Windows XP Pro and have looked for the
drivers in SoundBlaster support. As near as I can tell, every package there for
Windows XP requires that a PREVIOUS package be installed; I can't seem to find a
starting point. I want a bundle for the driver and the accompanying Li'veWare. Any
help would be much appreciated.

The download for the SBLi've! family under Widows XP includes everything necessary, it is stansalone. Li'veDrvUni-Pack English.
It includes the Surround Mixer and AudioHQ I believe. The rest of the software that was available under Windows 9x is not available under Windows XP.

C7 Firmware Question

Similar Messages

Maybe you are looking for