C7 Micro SDHC Card Problem

I am having problems with my Nokia C7 which fails to start after installing a Kingston Class 4 16 GB Micro SDHC card. The card works perfectly in other devices (including a Nokia 6120 Classic!)
The C7 works OK  with a 2 GB micro SD card.
The card appears to be within specification and whilst a C7 is not listed on the Kingston website the card is approved for the C6 and various other earlier models.
Any suggestions on how to get the card to work would be welcome.

Try formatting the memory card. If formatting via phone not possible or its not working try Connect your phone to a PC via mass storage mode and try and format the memory card.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

Similar Messages

  • Toshiba 16gb micro SDHC card problem, please need help!

    Hello,
    I didnt know where to post about this problem, so I just post it here. I bought few months ago Toshiba 16gb micro SD HC card for my android Huawei Acend G300 it worked fine for two months, in computer and in my phone, but yesteday after I listened music my android made restart by itself. I tought it was nothing so I went to sleep. But in the morning I saw that my mobile says that I have no sd card insterted into phone. I made restart to my phone, took battery out and took sd card off and put those back in, but still didnt find my sd card. Then I put my sd card into computer with micro sd card adapter but it cant find my sd card too. it doesnt reconize it. Please does anyone can help me with that? I had important stuff on that card,
    Thank You For Reading
    PS! Sorry for my english I hope you understood what I was saying.

    Greetings,
    I realize it's been quite awhile since your post but, did you ever get a response on how to correct the issue with your 16GB MicroSD HC card that 'died' suddenly?  I ask because I had a similar issue. My card suddenly unmounted itself (it was in a Galaxy S3) then it just was 'gone'.  Phone doesn't see it, pc doesn't see it...
    From what I was able to determine it would appear that this card is history and unrepairable but was curious if you ever had any luck in either recovering data and/or getting the card to be useable again.
    thanks,
    nataswon

  • Micro SDHC Card Support ?

    Hello,
    Does the Classic support micro SDHC cards (could be useful for faster exchanges between the phone and the card) ?
    Solved!
    Go to Solution.

    Yes they are supported
    Supported MicroSD media card storage sizes for use with BlackBerry smartphones   
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • N95-1 V21.0.016 WITH 8GB MICRO SDHC CARD ?

    Any one hav used n95-1 with latest version V21.0.016 8GB micro SDHC card up to more than 50% of the card capacities? any problems of slow response or other kind of problems? Which brand is better? Sandisk or Kingston or ? pls help! thanks

    18-Jun-2008 01:32 PM
    psychomania wrote:
    Definitely a no brainer!
    I find it very odd that a sandisk class 6 card is cheaper than a sandisk class 4 card???
    Of course it's odd!
    I think the answer is just that prices are quickly dropping, especially on newer models, and the "class 4" prices are just "old" prices of items already in stock.
    The italian online-shop site I was browsing (a reliable site, AFAIK), looking for the card, sells "class 4" for 39,49 euros and "class 6" for 35,89 euros.
    And it seems they just retouched the higher price: just a couple of days ago, on the same site, "class 4" model price was about 45 euros! I think now they are trying to sell all "class 4" they have in stock, whereas they say they have no "class 6" in stock at the moment (I could just order it).
    Thanks everybody for the clarifications.
    Message Edited by freesailor on 18-Jun-2008 01:48 PM
    Message Edited by freesailor on 18-Jun-2008 01:59 PM

  • Optimum allocation size Toshiba Class 2 16GB Micro SDHC card

    Hi --
    Be gentle, please. I am newly registered here and am not sure that I found the correct forum to post this question.
    I have a new Toshiba Class 2 16GB Micro SDHC card, just received today. Before I used it and while it is still under warranty, I wanted to test it for genuineness with the H2TestW program, which requires that I format it first.
    Certainly I want to retain the default fat32 format but what file allocation size is best?
    The card will mostly be used in my Sandisk Clip Plus to play MP3 files. A quick glance shows most of those files to be 5,500-10,000 KBs.
    Suggestions, please?
    Thanks.

    Hi buddy,
    I use different SD and SDHC cards for years now and I always use the default settings for allocation size. I never had any problems with that.

  • New Curve not recognizing an 8gig micro SDHC card

    Hi - I am totally new to the BB and to this forum. Here's my dilemma - I just bought and "installed" an 8gig micro SDHC card last night. The phone does not recorgnize it. First when I went to take video, it told me to install a formatted card. When I try to format, I get the message "Media Card Format Failed". I have tried many times, checked on how it looks in it's spot behind the battery, etc. Everything else seems OK. Any help??
    Thanks much.

    friki wrote:
    What I can deduce from my experience is that one should not buy a SDHC card if you've got a curve 9300 or 9330 phone. Even if the SP tell you the model is compatible with the technology, blackberry specs only mention that SD cards are accepted 
    http://worldwide.blackberry.com/blackberrycurve/3G/curve_specifications.jsp
    Hello,
    Sorry...but wrong. The only difference between SD and SDHC is the capacity of the card. SD goes up to 2GB (officially...some have labeled themselves SD but go to 4GB). SDHC goes from 4GB to 32GB. HC simply stands for "High Capacity." More information is available in the Wiki:
    http://en.wikipedia.org/wiki/Secure_Digital
    So, while the BB specs may only say "SD", they must include SDHC since they further indicate the capacity of Media Cards that various OS levels support:
    KB05461MicroSD card sizes supported by the BlackBerry device software
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • E65 and 4gb Micro SDHC card

    Hi out there
    I bought a 4gb Kingston Micro SDHC card for my new E65, but the phone don't regognize the card.
    Can the card be used with the phone, and if so - how.
    My phone has softwareversion 3.0633.69.00 from 06-02-08
    Thanks in advance

    The card cannot be used with the E65.
    The E65 only supports the micro SD standard so it's maximum is 2GB. 4GB cards are the newer SDHC standard and cannot be made to work on older hardware.

  • Micro sdhc card

    hello does E51 support 8GB micro sdhc cards??

    oh a 4GB will not slow down your phone.
    I heard ppl speak about 8GB slowing down, causing trouble restoring the phone memory after a firmware update etc etc. But I think a sandisk of 8GB could be ok. Still I will not try it.
    remember that industry standards as spoken of in the above link are not always equally well implemented by all manufacturers. That is why I simply do not believe all of the good talk about the 8GB micro cards. I had my experiences with memory cards on all sorts of devices and you always end up loosing things if you're not careful.
    But most important is NOT to buy a Kingston card. A sandisk works fine in my phone. I even have over 1GB of Nokia Maps installed and that application runs smooth. So I would say buy 4GB. Cause if you ever want to have some maps on your phone you can use a little extra memory.

  • Speed class number of a micro sdhc card

    Does the speed class number of a micro sdhc card make any difference for a Sprint 8330?
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

    I guess what I'm asking is the following:
    1. Does the 8330 support/accept any of the speed class ratings?
    2. Is a, for example, Class 4 card 'faster' than a Class 2 card?  Or is it the other way around?
    I have a 1 Gb in my BB now and don't do a lot of the downloading of videos/ringtones etc so I should be fine for a while, but was curious to know the above in case I see a great price on a larger card.  My 8330 will support 8 gb.
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Re: 8GB Verbatim Micro SDHC card recognized as 1GB Micro SDHC Card

    Dear All,
    A brandnew VERBATIM 8GB Micro SDHC Card is only recognized as 1GB in my T130 / WIN 7 - funny enough: A brandnew SANDISC 8G SDHC Card is recognized as 8GB
    Anything I can do here to use the VERBATIM Card ?
    Any Feedback is much appreciated
    Ciao Gerhard

    Where did you buy that 8GB SD Card? Are you sure it's genuine?
    If you got it from eBay or similar, it may be a fake SD Card that is physically 1GB but reformatted and re-badged as 8GB.

  • Curve 8330 and I'm using a 16 gig micro sdhc card

    believe it or not, I am using a 16 gig micro sdhc card in my sprint 8330 curve.  At the time of purchasing I had no idea that certain OS supported a max amount of gigs.  So of course imagine my surprise when the desktop software would not recognize the card -- luckily the sender of the card sent me a usb flash drive with a sdhc card adapter -- so I just put the micro sdhc card into the adapter and put the adapter into usb the flash drive and I just upload all of my music, etc. onto the card, then insert the card back into my bberry and voila, it works.  Everything shows up.  Mind you, it's a pain b/c if you want to add/remove things you can only do it this way vs. using the desktop software, but for the amount of space, I can deal with it.  I actually sold my itouch (16 gig) and now am just using my phone as a media player.  It's pretty cool!  Anyhow, just thought I would share.

    thanks for the info
    Message Edited by bbhorrigan on 12-17-2008 03:54 PM
    If someone helped you give them kudos. Research all info!

  • Nokia 5700 512 mb bundled micro sd card problem.

    hi,
    i am getting "certifictae error.Contact application supplier" error after about 80% installation is complete on most of my .jar files on this nokia supplied micro sd card.i cud install some of these apps. earlier.( the phone is only 7 days old). the same apps. insatll without a hitch on the phone memory or on another Transcend sd card which i hv.i cannot format the card also as it has bundled songs on it.is there any particular file on it which can be deleted to remove the problem.
    please help.

    is there any other forum where i can get help for this?

  • Nokia c1-02 micro sd card problem

    I have a 4GB kingston class-4 micro SD card
    In my old samsung corbypro in mass storage(connected via cable) mode the transfer speed is 3.8MB/s
    In my new nokia c1-02 in mass storage(connected via cable) mode the transfer speed is just 0.8 MB/s and windows says "this device can perform faster" and suggests me to connect it to Hi-speed usb 2.0 port(all ports in my biostar ta790gxb motherboard are usb 2.0).
    Its the same cable, same usb port and same memory card. Only the phone is different. I didn't get the windows suggestion in samsung corbypro.
    I think the problem is with the phone. Maybe some firmware update in future will fix it. Or do I have to do something else?

    It's nice if you have successed to update software. I have same problem as you but I can't even update firmware. You are lucky man even 
    I've tried to upgrade firmqare via Nokia Ovi Suite and Nokia Software Updater but same problem, always show after ~2 minutes that PC lost connection with device. I've tried it in several computers and different Windows but same problem.
    I would add one more interesting thing, at official site there's written that firmware update is possible also directly via phone by using "Select Menu > Settings > Phone > Phone Updates." but my phone doesn't have that option. Also doesn't have :
    "Set auto-check on in 30 seconds
    1. Select Menu > Applications > SW Update
    2. Select Options > Settings > Auto-check for updates
    3. Select On and OK."
     By the way, I wanted to update firmware because I loose all sms messages from every folder when I restart device and restoring to factory default doesn't help. Also USB works slow "Device can perform faster" but I thought it's normal. 
     Be happy that you, at least, successed to upgrade firmware

  • E90 micro SD card problem

    Hi.
    I've got Apacer 1 Gb micro SD card. Everything was working fine. But after I renewed the software of my Nokia E90, the micro SD cannot be found by PC with USB adapter. I thought the card crashed or smthng. So I bought a SanDisk 4Gb card. Firstly everything OK. After that I put this card to E90 card slot. Made some copyings. Back to USB adapter and again not working. My PC shows no card present in the adaptor.
    Does anybody face the same problem?
    Any solution for that?
    Thanks.
    Elyga

    Hi all;
    I was facing the same issue
    Got my card replaced several times and tried several times to hard-reset also but could not have this fixed until ... few hours ago
    When I hardReset my phone, I setup the "remote lock by SMS feature" on the phone - which allows me to lock rapidly the phone if lost or whatever
    Once done I test the feature (send myself an SMS and make sure it's properly setup)
    Once locked, I just push the "unlock" button, enter my code and that's it
    But did not pay attention to the message "Phone and Card locked"
    So I went to "Memory" app on the phone and choosed "Option/remove password"
    then entered the lockCode sent over SMS
    And ... wouaaaahhhh I got my 8Gb back available via my standard diskReader
    issue solved now
    I hope this could be helpfull to some of you
    -- DaWaBZ --

  • Micro SDHC card 16gb for X-Fi2?

    I'm interested in buying another micro SD card for my X-Fi2. I plan to use it to store movies, so obviously I'd like it to be a decent size.
    From the list of supported SD cards it looks like the SDHC cards from Sandisk are only supported up to 8gb. Ie, that the 6gb size is only supported in SD, not in SDHC.
    I find this rather strange as micro cards that size aren't readily available in anything other than HC these days, as far as I can tell.
    My question is this: has anyone had any experience using the 6gb Sandisk SDHC micro cards with the X-Fi2, and if so, does it work? I'm not too eager to spend the money on it and then find out it's no good. :-)
    Thank you to anyone who can help!! :-)

    Hi,
    SD cards that are not listed are not tested by Creative, it may or may not work. You might want to bring along the X-Fi2 for testing if you are planning to make a shopping trip.

Maybe you are looking for

  • How to catch and display a link content in another portlet page?

    Can you tell me how to display a URL content into next page after an user click s on this link? I am developing a JSR 168 portlet under a Portal. I have 3 pages so far in my portlet. view.jsp, view2.jsp and IpByHourPage.jsp. view2.jsp displays a lis

  • How to get the current user name of the host who is occupying a specific VM?

    I'm developing a winform app with c# code to manage Hyper-V. I need to remind someone if he/she would take a VM which has already been occupied by others. Is there any powershell cmd or WMI interface to get the current user of a specific VM? Thanks!

  • Full Width Composition

    I know you can do a full width slideshow now, but that is not what I'm looking for. I want the ability to have a button that makes a hidden full width object appear.  Currently I don't know of a way to accomplish this with any of the default widgets

  • Windows 7 Won't work with GT704WGB - Connects, but can't access internet or ping router

    Upgraded my Verizon DSL. I replaced an old WireStream DLS router and NetGear wireless access/router with Verizon's GT704WGB. After  I replaced it, Wireless connections from Windows 7 no longer work. Help. Any ideas? 1. The GT704WGB installation seeme

  • Batch determination for STO

    Hi, How to configure batch determination for Stock transport orders? I just wanted to know to which business process we need to assign the search procedure