C7 restarting after update firmware 013.016

Yesterday I seen that new firmware is out and I start updating from my operator network,everything was OK finish update and then start the problems with my C7.My phone restarted a couple of times from yesterday,last time I was in middle of call when C7 shutdown and start again alone.what happen I suppose that new firmware is for solving bugs not to make them My phone work "OK" until I update firmware,there was some bugs with widgets but nothing serious like this.Its very unprofessional when your phone is resetting in middle of some important conversation.Any solution Nokia?Has someone else have same problem?
sorry if there are some mistakes in english its not my language but I think that you understand problem

I don't have nokia care center in my town ,I must send phone over the mail express,because of that, I first called them but only what they can told me is to send phone and they will update software.
So they think, that's the software problem,I didn't send phone yet, I wanted to try to reinstall software over PC suite, but that was problem too. PC suite doesn't recognize operators version of software.from nokia ovi suite the latest software is 012.004 ( my previous ) and don't let me to reinstall because I have newer on the phone.
"Slint" I see that you have same problem ,I noticed one more thing my battery drain to fast (much faster then with previous firmware) also after upgrading software, do you have same experience maybe?
I am working now 16 hours without restarting if you think that's the temperature problem I will warm up a little this machine now , to see what happen
I didn't expect these problems ,I am very disappointed, its big many for phone and you expect everything fine.
The phone is great I loved him but these bugs kill my love for him.
I have also N86 and he works perfectly ,I wanted a touch screen and now I have a problem.
I don't understand how can be software problem if update pass well.and if there is differences between update from operator or by PC , why nokia gave option to update by operator?
I think that the problem is stupid firmware , phone work well until the update of firmware.conlusion by me is that I hope for new firmware soon to resolve these problems.i also make complain to my operator, will see what to do next .

Similar Messages

WLAN icon changed when update to firmware 013.016 ...

Its that true when updating to firmware 013.016 on Nokia C6-01 and user will get then new WLAN icon?
Nokia C6-01 firmware v013.016
16GB MicroSD Class 4.
History = Nokia N73 ME, Nokia N-Gage QD, Nokia 3220, Nokia 3315, Nokia 3210.

but..the new wlan icon look too small or look very transparent..
Nokia C6-01 firmware v013.016
16GB MicroSD Class 4.
History = Nokia N73 ME, Nokia N-Gage QD, Nokia 3220, Nokia 3315, Nokia 3210.

Kernel panics after updating firmware

Kernel panics began at startup after updating firmware about 2 weeks ago. Went through the KP repair routines prescribed by thexlab.com. Found no problems with the hard drive, permissions, etc. Did erase and install (with Leopard OS dvd bought from best buy) after archiving files to external HD and was able to startup normally. Updated OS to 10.5.7, along with several other items (iTunes was one of them). Put previously copied files (mostly iTunes). The computer ran successfully for a few days and then started getting KP's at startup again. Did another erase and install. Had success. Loaded iLife and Office 08 to have something to try to test the machine with. Shut down the computer and restarted successfully. I had forgotten I had not tested the RAM so downloaded Memtest. Tried to run it but the computer froze half way through the test. Did a hard shutdown, then tried to restart normally and got the KP again at startup. Here is the panic log:
Sun Jul 5 18:24:05 2009
panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
EAX: 0x43ec9630, EBX: 0x049cf804, ECX: 0x04e15800, EDX: 0x00000000
CR2: 0x000000b8, EBP: 0x43ec9668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04e10010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x43ec9408 : 0x12b0e1 (0x4555b4 0x43ec943c 0x133238 0x0)
0x43ec9458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
0x43ec9538 : 0x19e517 (0x43ec9550 0x1 0x43ec9668 0xb10612)
0x43ec9548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
0x43ec9668 : 0xb1753d (0xc1d00005 0x1000000 0x1000003 0x40)
0x43ec96c8 : 0xb0bfc0 (0x43ec9858 0x43ec9808 0x0 0xafe41c)
0x43ec9828 : 0xb00132 (0x0 0x600d600d 0x7027 0x43ec9858)
0x43ec98e8 : 0xca58de (0xc1d00005 0x1000000 0x1000003 0x40)
0x43ec9918 : 0xcae273 (0x2436f000 0x1000000 0x88100090 0x3e)
0x43ecb8a8 : 0xc92d8a (0x2436f000 0x1000000 0x15 0x2436f01c)
0x43ecb9a8 : 0xafa472 (0x2436f000 0x0 0x43ecbab2 0x80)
0x43ecba08 : 0xaf15a5 (0x48af000 0x0 0x43ecbab2 0x80)
0x43ecbb38 : 0xaf2d74 (0x48af000 0xaf6358 0x43ecbbec 0x4)
0x43ecbc08 : 0xade139 (0x48af000 0x1 0x0 0x13)
0x43ecbc68 : 0xad7940 (0x48af000 0x2407 0x43ecbd2c 0x48af000)
0x43ecbc98 : 0x40c515 (0x48af000 0x4a40130 0x4a40130 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
Was able to start up in safe mode and ran memtest again, this time having success and finding no RAM problems from the single run of Memtest. Shut down and restarted successfully.
Turned the computer off for the night and just restarted it successfully about 24 hours later, and it is still running.
I presently have about 130GB of free space on my HD. I don't have any peripherals attached. The computer gets fairly warm at times but certainly not excessively.
Can anyone decipher my KP log and see if there is a fixable problem?
thanks in advance,
Pat Leopard

Had another kernel panic at startup this morning. I had the Leopard DVD in and was contemplating another erase and install, but tried to back out of it. On restart the KP happened. Here is the log:
Wed Jul 8 10:44:41 2009
panic(cpu 0 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
EAX: 0x2ebb1630, EBX: 0x04e20404, ECX: 0x04de7000, EDX: 0x00000000
CR2: 0x000000b8, EBP: 0x2ebb1668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04de0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2ebb1408 : 0x12b0e1 (0x4555b4 0x2ebb143c 0x133238 0x0)
0x2ebb1458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
0x2ebb1538 : 0x19e517 (0x2ebb1550 0x1 0x2ebb1668 0xb10612)
0x2ebb1548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
0x2ebb1668 : 0xb1753d (0xc1d00001 0x1000000 0x1000003 0x40)
0x2ebb16c8 : 0xb0bfc0 (0x2ebb1858 0x2ebb1808 0x0 0xafe41c)
0x2ebb1828 : 0xb00132 (0x0 0x600d600d 0x7027 0x2ebb1858)
0x2ebb18e8 : 0xca58de (0xc1d00001 0x1000000 0x1000003 0x40)
0x2ebb1918 : 0xcae273 (0x2435f000 0x1000000 0x88100090 0x3e)
0x2ebb38a8 : 0xc92d8a (0x2435f000 0x1000000 0x15 0x2435f01c)
0x2ebb39a8 : 0xafa472 (0x2435f000 0x0 0x2ebb3ab2 0x80)
0x2ebb3a08 : 0xaf15a5 (0x4837800 0x0 0x2ebb3ab2 0x80)
0x2ebb3b38 : 0xaf2d74 (0x4837800 0xaf6358 0x2ebb3bec 0x4)
0x2ebb3c08 : 0xade139 (0x4837800 0x1 0x0 0x13)
0x2ebb3c68 : 0xad7940 (0x4837800 0x2407 0x2ebb3d2c 0x4837800)
0x2ebb3c98 : 0x40c515 (0x4837800 0x4a0bc40 0x4a0bc40 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
I left the computer alone for a while and when I hit the power button it came right up.
I'm going to pull RAM modules per your suggestion.
thanks,
Pat Leopard

Installed latest iOS on my iPad mini, it got stuck while restarting after update. It is still in that stage even after 7 hours.

installed latest iOS on my iPad mini, it got stuck while restarting after update. It is still in that stage even after 7 hours.

Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

After Updateing Firmware defult password is What?

Sir
i have router RV215W and i was update my router firmware to 1.1.0.5 . After finishing updation my router was restart than after i found wifi name is "ciscosb1" but old password is not work . So please tell me the defulted password after updateing firmware .

Hi Udayaraj,
Even if you do a firmware upgrade the password wont get changed until and unless if you do a device factory reset.
once try cisco/cisco or admin/admin.
Thanks,
Phanikrishna

HT4623 My ipad2 is not restarting after updating to iOS7, I now only get the apple symbol? Please advise what I need to do to get it working again. Thanks.

My ipad2 is not restarting after updating to iOS7, I now only get the apple symbol? Please advise what I need to do to get it working again. Thanks.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Mac won't restart after updating to OS X Mountain Lion

Mac won't restart after updating to OS X Mountain Lion. Please help?

Like what happens? Is it just spinning?
If you've waited sufficiently long (say 10 minutes) you could just hit the power button which will do the trick. A little more gentle would be to open a terminal window (if you can) and type 'sudo reboot' (without the quotes) and enter your password when it asks. That will do it too.

HT204347 My MacBook Pro won't restart after update to lion

My Mac book pro won't restart after updating to lion ! Said problem a cured at startup press any key ! No Goodrich

Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

Compass application can't running well after update firmware to 20120726

my windpad7 can't run compass application well after update firmware to Android_2.3.1_MSI_02_20120726 but it can pointing well if i turn it upside down (face down). i use the same application that running well on earlier firmware and I've try using another typical application and the result is the same,.. anyone experienced it?

on my n73 i can go to app manager and reinstall them.
if u wanna remove it, then reinstall them and uninstall.
Blackberry Bold

HT2827 i just updated my software for the apple tv and the light is flashing and it wont restart after update thoughts?

i tried to update my software for apple tv and it will not restart after update. flashing lights

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Sony A7 failed to turn on after updating firmware 2.00

As i mentioned, my Sony A7 failed to turn on after updating firmware 2.00. It just appear a blank screen after click the finished button on the updating app on Mac. I waited for more than an hour and there is still no thing happened.

I bought the Sony A7II a few days ago. It initially charged just fine, but today I tried to charge it using the cable with an electrical outlet as well as the USB to computer. Neither one would get the charge light to illuminate. Not feeling the love Sony. I just purchased a Flash, wrist belt, filters, etc... I'm definitely not happy. It seems this is a problem!

Some buttons without tones after updating firmware...

Hi.
After updated firmware to version 20.0.080 (5530 Xpress Music), some tones and vibrates at dialing pad (just numbers) and at Contacts (main screen) don't work any more.
All other functions work normaly just as described, but some tones and vibrating functions doest'n seem to react. I have set touch screen tones on level 2, also the vibrate on level 2. Tryed to reinstal the latest firmware again, done succesfuly, but no changes.
Should I try to restore the phone by *#7370# ???
Is anybody facing the same issue ???
br,

Hey,
I have the same problem with my phone. After the update, installing v.20.0.080 the dial tone from the keypad just dissapeared. These morons at Nokia instead of adding letters to the keypad dialer with the new firmware, they went further and removed the dial tone. Such a progressive step..

Stop requiring system restart after update

I turn on my machine. Acrobat says there's an update available. I let it update. Then I get a dialog saying:
"You must restart the system before using Acrobat. Click Restart Now to restart automatically".
Come on! It's 2010... Requiring system restart after update is sooo 1990's...
Or put another way, I cannot remember when another app required system restart after updating. Only Acrobat does this nowadays. Please, stop this madness!

While Adobe doesn't deliberately try to annoy users,
it does not deliberately try to remove documented annoyances either.
There are still bugs in Acrobat 9 which have been documented for years, and no one seems interested to fix them.
Serious flaws ... like crashes and corruption of PDF files so they cannot be saved. Hours of work lost.
Every 3rd time I select the Crop icon, I can expect Acrobat 9.4.5 to crash.
There is no excuse for an app to require full reboot on update. C'mon, spend some time at
Microsoft Tech Support and figure it out. Acrobat is also the last application I can remember
requiring reboot.
I turn off Auto Update on both Acrobat and Windows.

My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help?

My MacBook Pro won't restart after updating iTunes, and so the update doesn't work. I have just purchased an iPad mini and can't sync it - can anyone help

Press and hold power button for up to 30 seconds. Remove battery and reinsert then repeat.

MBP 17" will not restart after updating Java... why?

MBP 17" will not restart after updating Java...why?
It would actually try to restart for about 10-15 seconds but would quit and then shut down. Tried using P_R_Command_Options but that too failed and again it just shut down. Tried using D at startup which ran a test of the hard drive. No issues there which tells me there's a software problem.
Can any one help?

Disk Utility suggest reformating
Reformatting is not a Recovery Aid. When Disk Utility suggests reformatting, it is because it considers your drive unsalvageable. Yes, you lose all the data on the drive when you reformat.
And yes, Mac OS X Extended, journaled is the method you will need for a Mac OS X Boot drive.
You should also consider buying a replacement drive to have on hand the next time this internal drive gives you the slightest bit of trouble. Possibly an external enclosure to put it in as well. and it would not hurt to go ahead and Install Mac OS X on it and try booting from it, to make sure it is ready.
And make sure your Backups are current, as the next time that internal drive screws up you may get no warning whatsoever.

C7 restarting after update firmware 013.016

Similar Messages

Maybe you are looking for