C7 sync doesn't work after Anna update

I normally sync the agenda between outlook 2003 and C7 with Ovi-suite.
After update to symbian Anna it doesn't work.
Strange is that Ovi suite gives the number of events that did not sync.
So he can recognize them, but can't sync.
Any solutions?
Thanks!
Pietth

I have the same problem in C6-01 after Anna Update, there are another two posts around here with other people with the same issue, an, believe it or not, no answer from Nokia
My problem also affects Ovi Maps favourites. I just could update them once since Anna Update, and now that is failed too

Similar Messages

Sync doesn't work after latest update

I've got PC suite 7.1.180.94 and Outlook 2010 (commercial set up with Exchange). The latest PC suite update seems to have broken sync. I click the "Synchonize" icon and absolutely nothing happens.
I've tried a repair, remove-and-replace etc but no dice - any ideas? Happy to do some diagnosing as I'm a software engineer.
DON'T suggest Ovi, unless Nokia have added one-way sync - I don't want my employer's Contacts and Calendars on my phone!
Thanks,
Papadeltasierra

Hi papadeltasierra, can you download Nokia Suite 3.8.30 from www.nokia.com/nokiasuite and try with that?
Which phone do you have?
Cheers, Samuli

My SuperDrive doesn't work after Lion update

My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
Thanks

I too have had the problem since updating to Lion. My superdrive isn't even recognized. I have repaid hard disk permissions and also reset PRAM. Sure wish I had a fix.

E7 Nokia Messaging not working after anna update

hi
nokia messaging not working after anna update. when i
-choose provider (hotmail/gmail/yahoo...etc)
-enter username & password
-click OK to T&C
-get error message: "cannot enable this service on the device"
any ideas?

I'm having a similar issue. It appears to only impact Hotmail accounts. For me though, this happened without updating the OS. The email client is simply failing to connect to the Hotmail interface. Only two possibilities, either Microsoft changed something on the email gateway or Nokia changed something on their end. Either way, it's not working and has been out of commission for the past week. If this is how corporate friends get along, I'd hate to see what happens in a adversarial relationship.

E7 - MfE not working after Anna update

MfE not working with my E7 after Anna update.
Worked well before.
I have tried several settings but no help.
Also remove mobile settings from Outlook via web.
Please find info from admin_log1.txt:
05/09/2011 10:40:36 Mail for Exchange Build : 1.00.000
05/09/2011 10:40:36 Device Software Version: 022.014 2011-07-05 RM-626 (c) Nokia
05/09/2011 10:40:36 Device Model: E7-00
05/09/2011 10:40:36 Serial Number: xxxxxxxxxxxxxxx
05/09/2011 10:40:36 Profile Info
Peak sync schedule: Manual
Off-peak sync schedule: Manual
Heartbeat interval: 11
Access point: 4097, Destination: Internet
Secure connection: Yes
Port number: 443
E-mail sync: Enable
If conflict: Server wins
Sync completed task: No
05/09/2011 10:40:37 Profile Updated
05/09/2011 10:40:48 Connected to connection method named Internet with type Packet Data
05/09/2011 10:40:52 HTTP error code=403
05/09/2011 10:40:52 HTTP Server Error 403 : Forbidden

We are aware of the issue and investigation is ongoing.
We have received lot of feedback, but It seems also that all cases are not similar. That's why I request to contact to Nokia Support.
One of the first things we should be looking at with MfE issue is the Admin log files which are located under c:\MailForExchange folder. These logs should help us identify the issues. Please list the settings along with an attachment of those admin log files. Please send them to Nokia Support (Contact Us from this page).
In Symbian Anna, when there is a policy which is not supported, Exchange server may not allow the sync based on one of the server settings. For example the roaming policy may be the one causing the failure, Policy SyncWhileRoaming =1 on the admin log. This will be changed on next update.
However this can happen due to any unsupported policy.
You can identify the problem on the policy and if necessary, then the administrator can toggle it, or set the tick box Allow non provisionable devices on the Exchange server. Otherwise, the device can’t sync.
To make sure you can open the admin logs and compare them to this table:
10/07/2011 17:17:32 Policy AllowTextMessaging = 1
10/07/2011 17:17:32 Policy SyncWhileRoaming = 0
10/07/2011 17:17:32 Policy AllowHtmlEmail = 1
10/07/2011 17:17:32 Policy RequireSignedSMIMEMessages = 0
10/07/2011 17:17:32 Policy RequireEncryptedSMIMEMessages = 0
10/07/2011 17:17:32 Policy RequireSignedSMIMEAlgorithm = 0
10/07/2011 17:17:32 Policy RequireEncryptionSMIMEAlgorithm = 0
10/07/2011 17:17:32 Policy AllowUnsignedApplications = 1
10/07/2011 17:17:32 Policy AllowUnsignedInstallationPackages = 1
10/07/2011 17:17:32 Policy AllowInternetSharing = 1
10/07/2011 17:17:32 Policy AllowPOPIMAPEmail = 1
10/07/2011 17:17:32 Policy AllowConsumerEmail = 1
10/07/2011 17:17:32 Policy AllowBrowser = 1
If any of these 0's or 1's is different than above, you may not sync.
The MFE Client writes the following line to admin log when there is a policy that can’t be enforced: Warning: Some unsupported server policies were found -- syncing may fail.

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

Hello Dear,
I've using my Epson Stylus CX5600 for a long time with OSX 10.7 Lion on my Mac.
The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
on my macbook doesn't works anymore
I've re-installed a lot but when I try to print the sheets appears in blank
The driver-version available in Mountain Lion is 1.5
I guess this is the problem and need a urgent correction driver update
I'm looking forward to the internet and Epsons websites but didn't find nothing,
in Epson website doesn't
Can you help me please?
Thankyou

Hi my friend,
I've tryed Bonjour, but only works Windows to install a print for Mac.
I need the opposite... print from Mac to Windows.
Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
I can't remember but I did this:
1. In iMac System Preferences->Print&Fax->"+"
2. In "Add Printer" click and Tool Bar->Customize Toolbar...
3. Add "Advanced" to Tool Bar and click "Done"
4. Click Advanced->Type->LPD/LPR Host or Printer
5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
Do you have any idea?
Thank's again

HTML animation effects doesn't work after last update

After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
Various animated png in html project appears immediatly without shows transitions or deformations.
I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
The same animation made with Hedge produce more the 100MB folio.
why new version of dps don't show my html anim correctly ? I hope adobe correct this proble.

We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
Neil

RM 900 remote doesn't work after driver update

Hi!
After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
Any clue how to make it work again?
Using Windows XP SP3 and Audigy Platinum Ex.
Thank you again in advance.
PD: Excuse my poor english, it's not my nati've language.

Hello Jashue67,
Sorry to hear about all the trouble with the Apple TV. It sounds like you have done a restore but need to pair your Apple TV remote at this point. You can follow these steps to pair the remote:
Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
You can find the full article here:
Apple TV: Pairing and unpairing the Apple Remote
http://support.apple.com/kb/ht1555
Thank you for using Apple Support Communities.
Best,
Sheila M.

N73: restore doesn't work after firmware update

Hello!
I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
After the update I tried to restore the backup via the same app.
Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
Is there another solution that doesn't involve buying this 3rd party software?
TIA

The phone is working well...
I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before.

Internal camera doesn't work after Firmware Update

Hi everybody,
I had some troubles after updating the Firmware to version 1.1 on my MacBook (the black model). Since the update my camera (the one mounted on top of the screen) doesn't work any longer (it keeps capturing a plain green picture) and the led near the camera is always lighted. Is there anyone who had the same problem? Any idea to solve it?
thanks
MacBook Mac OS X (10.4.8)

Hi,
problem solved restarting with OptAlt+PR

Ipod doesn't work after firmware update

I have an old ipod and I tried to update the firmware. After the update It did'n work. ON the Ipod screen it appear like a plug indicating to charge it, but I charged it several times and the result is the same.
Now i'm trying to recover it again but my computer doesn't recognize it.
¿Is there anything I can do?
Thanks in advance.
Jse

The best place to look for help first is Genuine Apple help directly from Apple.
Read the iPod Touch Users Guide.
http://support.apple.com/manuals/#ipodtouch
Also start with the basics from Apple.
1. *Restart iPod touch:* Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you can’t turn off iPod touch or if the problem continues, you may need to reset iPod touch. A reset should be done only if turning iPod touch off and on doesn’t resolve the problem.
2. *Reset iPod touch:* Press and hold both the On/Off Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
For more troubleshooting suggestions, see Appendix B, “Support and Other Information,” on page 214.
And More..........

Few apps don't work after Anna update

I got a new N8 recently (my last one was stolen, insurance covered most of it though) but with the same product code and everything. Of corse, it didn't come with Anna pre-installed (it actually came with PR1.0 and I remembered how horrible the phone used to be). However, I updated to Anna with Ovi Suite without problems but I had a few weird experiences with the additional 1/2 and 2/2, for instance, when the phone found these updates it said that they were about 30-40 kB which obviously is wrong, and it took a while to install them. Then later I got them both again but this time they had the right size. 1/2 installed without problems but I had to try with 2/2 several times before it (")worked(").
Anyways, some apps like fMobi (pay-version) and the swedish app for public transportation don't work anymore. Don't know if they did on my last N8 after update. The additional updates were supposed to fix some non-working apps but it certainly isn't that way with my N8...advice please?

Just to point out that the fMobi stopped working in my N8 too after the update.
Uninstalled and reinstalled no end.
But I found that if you go to the fMobi facebook page, he say's that wiith the new controls put in by facebook, it has somehow messed up the App. Check his page out and see what he says.
Jurassic Park, Sam Neill to Dickie Attenborough " Mr. Hammond, the phones are working !"
N8-00 Tesco UK 059C951, Lumia 920

HP Laserjet m1214nfh MFP Doesn't work after firmware updating

Hello
HP Laserjet m1214nfh MFP (USB Connetcion).
I downloaded the latest firmware (ver: 20130211 4 Mars 2013) and updated it.Now it doesn't work and on its LCD it prompts "Initializing" and after some seconds LCD turns off and again prompts "Initializing".
Please guide me.
thank you

Hi,
Please try plugging the printer to a direct power source without any power hub or surge protector usage and check if that may help.
If the same persists please contact HP support by following Technical support after you buy for your region below:
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Flash doesn't work after I updated it

I am using Firefox 34.0.5 and updated my flash player but after the update it stopped working. The videos doesn't show up. I tried disabling all add-ons and found out that Shockwave Flash 16.0 is causing the problem. What should I do to make it work again?
I don't know why but some videos work just fine and other videos doesn't show anything even a white or black screen, even though they're from the same site. When a video doesn't show up, the cursor changes from the normal cursor to "working in background" cursor rapidly.

''Talha [[#answer-672921|said]]''
<blockquote>
Hey,
Did you try these typical Flash fixes?
(1) Disable hardware graphics acceleration in Firefox and in Flash
(A) In Firefox, un-check the box here and restart:
orange Firefox button or classic Tools menu > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(2) Disable protected mode (Win Vista & Win 7 & maybe Win 8)
See this support article from Adobe under the heading "Last Resort": Adobe Forums: https://forums.adobe.com/message/4468493#TemporaryWorkaround
Hope it helps.
</blockquote>
I did both of these but it still didn't work. I tried using another browser and found out that the problem only occurs in firefox.

C7 sync doesn't work after Anna update

Similar Messages

Maybe you are looking for