C7280 all-in-one. Suddenly, printed pages come out blank.

Actsand sounds like it is printing and copying but pages come out blank. No error message on printer or either of the computers connected.

Hello,
Please print a Self - Test report.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01448018&cc=us&dlc=en&lc=en&product=3204785&tmp...
Can you see any of the colors as appear on the report sample?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank.

    Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank. I have used genuine HP cartridges. All four cartridges have have over 40% ink levels as per Self Test Diagnostic page.Printhead diagnostic says the print heads are "GOOD". Scanner  works fine.  Self Test Diagnostic Page prints in PINK color.Print quality TEST does not have black print on page.Printing and phot copying all come out blank.HELP.

    Hi Equi_nut,
    Do you have the same printer as the user above? 

  • I have a Canon Pixima MP530, ALL Pages Come out Blank, ink tanks are full!

    I have a Canon Pixima MP530, all ink tanks are full, printer goes through the motions of printing but all pages come out blank. I am using windows 7. all functions seem to work, except no ink comes out it was working perfectly 2 nights ago. I called canon tech support but they have no idea whats going on with it. am thinking maybe the print head is shot? Any suggestions are welcomed, I LOVE this printer and need it to work.

    with that kind of issue it could be the print head oooor it could be the part of the printer that suctions ink into the print head, it's hard to tell. You could take it to a service facility, but it would probably cost you more to repair it to replace it.

  • Canon Pixma 922 - when I copy a document the pages come out blank.

    When I copy a document the pages came out blank.
    Also, when I print an MS-Word document, the pages come out blank, however, if I print an HTML document from a website, the printer prints fine.

    Hi dstei33162,
    Since HTML documents are printing correctly, it is possible that the large black ink tank in the unit may be clogged.  You can print a nozzle check pattern from the printer to see if the inkjet nozzles are dispensing the ink correctly.  To do this, please follow the steps located here.  Once it is printed, please examine it and compare it to a correctly print pattern here.  If all of the colors are not appearing, including the black grid at the top above the colors, performing print head cleanings on the unit may resolve the issue.  To perform the cleanings, please follow the steps located here.  We recommend performing at least one cleaning and two deep cleanings.
    Should you still experience difficulty, the printer may require servicing; please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • First page comes out blank

    Photosmart 8250 Every time I print after turning the printer on, the first page comes out blank then every thing goes allright. What/how to correct?
    Thank you. 

    the problem you are facing might be because in first page general attributes you had not defined next page as page 2 ..as you  are saying the desired thing is happening oon pages 2 and 3 but not for 1 and 2
    so from this it seems that linking of pages might be missing.
    Hope it helps you
    RICha

  • I have changed cartridges, re-installed drivers, re-started computer. Still pages come out blank

    I have changed cartridges, re-installed drivers, re-started computer, aligned cartridges, cleaned printer head. Still pages come out blank even when just making copies.  What else can I do?

    Please read this post then provide some details.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

    I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
    Does anyone have any suggestions?
    This question was solved.
    View Solution.

    Hey Spider! First off welcome to the forum.
    I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
    After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
    Thanks,
    SeanS
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Print activates but page comes out blank

    I have a Photosmart eStation C510a that I have been using for over two years with no problems.  The problem I have now is that when I send a file to print a page comes out but it is blank like no ink is being disbursed.  I have new ink cartridges installed and they read as full.  Is there a fix or do I need to send for repairs?
    This question was solved.
    View Solution.

    I cleaned the printheads and it fixed the issue for now thanks to the response to another post.  It is great to have a group where you can find potential fixes before having to go for repairs or a replacement.

  • I have an hp photosmart c7280 all-in-one series printer won't print. error message, system problem

    I have an HP Photosmart All-in-One C7280 series printer/fax/copier/scanner. I have been having issues with printing for the past few weeks. It is a wireless printer, with a jack into the wall (for fax) and it is plugged into a power source. I never used to have issues with it before, but recently, it won't print when I send a document to it to print. It will print its configuration pages, reports, etc if I select them from the Printer's menu but not when I send a doc to it to print. First it was saying it was offline, but I figured out how to override that by operating as an administrator and selecting "Use Printer Online" from the dropdown menu when I right clicked on the printer from the control panel. But now it says "Error: Printer failed to print document. System error".
    Noooo clue what to do now. This is the only color printer we have so we kind of need it to work. We bought this printer off the shelf at a office store (before I started working here) and so we don't have any designated technichians to work on it. I asked the guy who services our Image Runner Copier to look at it but he had no clue what was wrong with it. Hopefully someone can help?

    goestherain,
    I need to know what operating system you are using to helps narrow troubleshooting a bit, what OS are you running?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Using scanner on an HP C7280 all in one when printer component doesnt work

    I have an HP C7280 that has been having problems not printing for a lot of reasons that are not fixable.  However, I would like to use the scanner portion of the printer.  Is there a way to get the printer to scan/copy only and eliminate the printer side of the "all in one"?

    I coveredwgn,
    Welcome to the HP Support Forums.  I understand that you would like to retire your printer and only use it as a copier/scanner.
    To better assist you, would you please give me some information on the reasons why the printing side is being retired?  I’m asking because there are some errors that can occur that will stop you from using the scanner/copying features, in particular copying as it will use the printer side of things.  In addition would you please let me know how the printer is connected (USB  cable, ethernet, or wireless)?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP C7280 all-in-one duplex printing problem - Long and short sided binding!

    I use a HP 7280 all-in-one printer and have the duplexer attached. Up to installing snow leopard I have been able to print two sided documents from ipages no problems. But now every time I try to print a two sided document in flips the second side vertically (basically meaning it is binding is always long edge). When I change the setting from long edge binding to short side it makes no difference at all!!! I know this used to work, but it appears snow leopard changed that!! Any suggestion to fix the problem, thanks

    One of the common issues with automatic duplexing, is the requirement of increased margins due to the way that the process works. It is not a defect, it is simply the way that the process needs to ensure print quality when auto duplexing. In contrast, manual duplexing does not have the same needs, as it draws directly from the tray. From testing of other brands, I can say that I have seen the margin issue occur with other manufacturers as well. Seems to be a necessary evil when auto duplexing.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • HP Photosmart C7280 All in One - not printing

    have replaced black & cyan cartridges but still get printer message saying Out of Ink. Have restarted printer and computer, downloaded printer driver, unplugged and reconnected.  Control Panel shows cartridges all have ink, but still get Out of Ink in Print menu.

    Hi luddite3,
    I would like to help you with this. I suggest removing the cartridges and reinstalling them, if an alignment does not begin automatically, I recommend performing an alignment manually. Please follow the instructions below.
    Remove the cartridges.
    If the alignment page does not print, press the Setup button ( ) on the front screen of the printer
    Press the Down Arrow button ( ) to select Tools, and then press OK.
    Press the Down Arrow button ( ) to select Align Printer, and then press OK. The product prints an alignment page, aligns the printhead, and then calibrates the product.
    After the success or failure message appears on the control panel display, press OK to continue.
    If the issue persists, clean the printheads
    Open the HP Solution Center, click on settings
    Under Print Settings , click Printer Toolbox . The Printer Toolbox opens in a new window.
    Click the Device Services tab.
    Click Clean the Printhead.
    Please let me know if this resolves the issue, I hope it helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • When printing/copying pages come out blank on hp psc 2175

    When I print or copy the printer processes a page like it is printing but the pages are blank.  The ink cartridges are new and the print head (?) goes across the page like it is printing.  The printer is an hp psc 2175 and I am using windows 7.  The last thing I did on this printer before it would not print/copy was to scan several documents using Windows Live Photo Gallery and this scanned correctly.  What can I do to get it to print/copy again?
    Thanks!
    This question was solved.
    View Solution.

    When the printer is not printing black ink and printing out blank sheets ... beware the cartidge sometimes does not insert in proper alignment even though you hear the click. Look closely at the cartridge after you insert it. Make sure it is not slightly tilted. And make sure it is dead center, not further to one side than the other because it will not make proper contact. Also 2 more good suggestions here... http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead/HP-Officejet-6500-Wireless-will-not-print...
    PS- the HP 1210 will print without the color cartridge installed!
    Also it is not that hard to refill cartridges yourself. Look how much ink you get for so cheap... http://www.amazon.com/gp/search?ie=UTF8&tag=ie8search-20&index=blended&linkCode=qs&camp=1789&creativ...
    --ThatPat

  • IPhone 5s can't connect to HP C7280 All-in-One wireless printer

    I'm trying to connect to my IPhone 5s to my wireless HP C7280 AiO printer. I just downloaded HP AiO Remote app. My printer is connected by ethernet to
    the same wireless network as my phone. My phone can't locate the printer when selecting this wireless configuration. My printer is in the list of supported printers. Please help. Thanks!

    The printer needs to be connected through the same WiFi network as the iPhone in order to use AirPrint. Connecting via Ethernet will not work.

  • OS X 10.6.7 Canon All-in-One 480 Printer will not print files, only blank pages. Have to go to Utilities, Disk Utility  and Repair permissions for a temporary fix. How can I get a permanent fix?

    After upgrading to OS X 10.6.7., my Canon All-in One MP 480 printer will not print. it says it is printing, but the sheet of paper just runs through the printer and comes out blank. I finally went online to just answers.com and got a fix involving the System preferences, printer and fax. i was told to go to Applications in the HD, thenUtilities, then Disk Utilities, highlight the HD and check on Verify Disk. If it says Disk is OK, click on Repair Permissions. At first, that worked, but the next time I went to print after turning the printer off, it refused to print and just ran the sheet of paper through blank. Once that happens, there is no way to go back to printing the file that failed. I fiinally had to copy and paste the info from the file that would not print and put it in an email to myself and then print that. This is very frustrating, and I would really like a final solution for the problem.
    bettyfroomneedham

    There's a lot there, so I'll start with the parts I can answer quickly.
    The "ACL found but not expected..." messages can be safely ignored, so says this article
    http://docs.info.apple.com/article.html?artnum=306925
    (look below all the "SUID" examples)
    I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
    Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
    Please post back with the remaining point of concern.

Maybe you are looking for