C7280 printer and Mac OS X yosemite

Photosmart C7280 printing OK but unable to scan with Mac OS X Yosemite. Is there a driver for the latest version of OS X?

Hi,
Apple's done this again. Please check the following link first:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04473034&tmp_task=prodinfoCategory&cc=us&dlc=en...
and the following link shows how to install new patch:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04469325&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Good luck.
ps For the sake of us (WE, USERS) vendors (all of them) MUST work together before release their products.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Photosmart 6520 and Mac OS X Yosemite: What utility should I install?

I uninstalled the utility for my Photosmart 6520 e All-in-One because it wasn't working with new Mac OS X Yosemite. In hindsight, I wish I had just used the Apple Upgrade, but I didn't know about it. I tried installing the utility for Mac 10.10 Maverick (I think that's what it's called), but am having no luck. My printer is on and it is not showing up to select in my printer queue. What should I do?
This question was solved.
View Solution.

Hi,
Please use the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04473034&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Design Jet 450C Printing from Mac OS X Yosemite 10.10.4 (Graphisoft ArchiCad to .pdf)

Please let me know which Driver I can install to print successfully from Mac OS X.10 Yosemite to HP Design Jet 450C. THANK YOU!!

Hi Guys I am having similar issues with My network printer / Photocopier Doc C3100I have tried the following : Connecting to it VIA IP address used the Xerox firmware for MAC - dindt work - it wioll beep Used PCL generic provided by MAC and didnt work - will print alot of pages that has numbers and letters on them I have checked the logs on the printer and it state error 016-749. Abvioulsy the printer is using PCL but then why it wouldnt even work with the generic PCL driver or the xerox mac firmware ?? It is using LPD but i also tried HP socket with no rsults other than again printing rubbish The printer works fine in windows i have disabled the accounting function within the printer. I have also revret to MAC 10.10.3 from 10.10.4 with no luck I have tried to fix all premisions within mAC but again with no luck I can creat PDF files so MAC printing software dopes work Apple couldnt help me as they think it should work with treh generic soft at least Help please Jason

Dell printer and Mac OS

Hi, we just switched over to Mac and am trying to get my Dell 2130cn printer to work with these computers. Many thanks to the help in this forum, i was able to find and download the recommended pxlmono driver and can now print in color. However, i'm not able to use the duplexer, second tray, and printing photos takes forever. We are using the comps/printer in a business application, and printing newsletters, envelopes/graphics etc is a necessary daily event. Does Mac offer a translating software that will allow me to install the Dell drivers to run the printer as I did on our PCs, or should I buy a new printer?? Many thanks

Thanks for the replies guys. Just to double check--would it work if I installed Windows with a Mac program that allowed me to run Windows parallel to the Mac os (i'm sick of windows) just to run the printer? I know it seems like an easier solution to just buy a new printer, but frankly I'm not excited about the options out there--really like this printer and have $500 of toners we just bought for it. But i don't really want to compromise--I'd like it to work like it did on a PC. Thanks again

HT3500 I cannot connect Macbook (OS 10.6.8) to Epson XP 400 wirelessly. It works when connected to a USB cable. Both printer and Mac are on the same network and Norton/symantic is OFF. The Epson will not show up in "add printer". is off.

I cannot connect my Macbook to Epson printer XP 400. Both are on the same network and Symantic anti virus is disconneted.
Add printer does not find the Epson. All works when I use the USB cable.

Further information on my question about the epson wireless printer and macbook.
It seems that the epson xp-400 works wirelessly only with 802.11n wireless network not with 802.11g or earlier.
Does anyone else know about this. I read it on the epson support site for epson xp-400.
Also epson xp-400 will not work wirelessly if it is already connected to a computer with a USB cable.

HP psc 1210 all-in-one printer and Mac OS 10.9 (Mavericks)

I just installed the new OS X (Mavericks) on my mac yesterday, and now my printer, an old but reliable HP psc 1210 all-in-one, will not install. I was previously running OS 10.6 (Snow Leopord) and had no problems with the printer. Is there anything I can do to install my printer on the new OS? My computer doesn't even recognize that there is a printer connected via USB when I try to install it... is there anything I can do?

Hello,
Here is a link to a support document on hp.com on how to install on OS X Mavericks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
Let me know if this was usefull by clicking on the Kudos button.
I work for HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Wireless printing and Mac OS 10.6.8

I have recently upgraded to Mac OS 10.6.8 (Software Update) and it appears to have removed my wireless connection to my HP Printer All in One C8180. Computer instructions do not feed into the printer. It was fine before the upgrade. I have a Mac OS X (10.6.8), Mac 2.4Ghz Intel Core 2 Duo.
Can anyone suggest what to do?

Unless you've tried this already, before you roll back to 10.6.7 it may be worth re-installing the 10.6.8 update using the combo updater: http://support.apple.com/kb/DL1399
The combo has all the updates since 10.6. Sometimes on this forum people report issues after doing the latest point update to the OS. Using the combo often, though not always, fixes things.
It's worth repairing disk permissions before and after updating.

Idle printer and Mac

I havephotosmark a 2009 Macbook OSX system and a photosmart 6380. I get the printer idle message, too. Have followed instructions to no avail. The printer prints out blank sheets, but the printer message says that it is idle. It has new HP Idcartridges.

Hi Krypton,
Welcome to the HP Forums!
I understand that your HP Photosmart 6380 is idle and printing out blank sheets.
I have a few questions for you:
1.) What version of Mac are you using? OS X: Finding your OS version and build information
2.) How is the printer connected? Wireless or USB?
3.) Can you make copies with the printer?
In The meantime, please take a look at this guide. Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
Hope to hear back from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Photosmart e-station printer and Mac 250 Pro

I am having problems printing 3 x 5 photos because the error code says that the paper tray is not loaded. It is loaded and I think I just do not have everything set correctly from my Mac. Any suggestions??? j-9

Hi,
First try a forced shutdown of the "Zeen". Hold in the power button until the Zeen completely powers off. Not just the screen. Usually, the Zeen will make a small sound from the speaker when the Zeen is completely off.
Turn the printer off as well. leave it off for about 30 seconds.
Power the printer on. Power the Zeen on. Wait until all is completely powered on and connected to each other.
You can tell this from the home screen of the Zeen.
Also ensure that the Zeen is loaded with the latest Android version for the Zeen. That is Version 2.11
visit this link to find out how:
Link to Updating the Zeen
Hope this Helps
Russ@HP
Say thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
(Although I am employed by HP, I am speaking for myself and not for HP)
+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Problems with Epson R2400 printer and Mac

I'm a photographer and I switched to an imac a while ago. When I tried out my Epson R2400 printer, it worked really awful, comparing to when I used it with PC. I still haven't managed to fix these prolems. The printer menu is diminished (less options, many inaccessible in grey), there are problems with print density, with color adjustment, what I see on my screen is not what I get on my print (a black and white photo in grayscale mode can appear almost light blue when printed), there are even alignment problems (centred photos appear closer to the left edge of the paper). And I don't have a clue why all this is happening. The printer driver I installed is apparently the latest one. So I don't know where to go from here. I have installed and I use the profiles of the specific papers I'm using, but the results are NASTY. Please help.

By the way, I have read the links under "More like this", but those threads don't seem to clarify my question. Originally I had installed my Epson driver from the original (old) Epson CD. When that didn't work I uninstalled and installed the newer Epson driver from the Epson's site. Doesn't work and the problems I'm having are the ones I mentioned above.

LEXMARK PRINTER and MAC

Hello,
I have a Lexmark all-in-1, S400 Series. Has worked fine up to a few days ago. Nothing is printing. I am getting the message: "There is a problem communicating with the printer" although the MBP printer window also indicates "printer ready"
I've not changed any settings/preferences. I've checked the addresses (SSID are the same, i.e., computer name and printer name), pinged; . All appear fine.
By the way, I print wirelessly (or had been up to now).
Please help.
Thank you,
FMW

I have a different Lexmark (x5410) but here are a few trouble-shooting hints...
Open System Preferences, go to Printers, select the printer, click on "Open Printer". This will show you the print queue. Sometimes a wonky job will fail and back up everything behind it.
Go to /Applications/Utilities/Console and run it right after the printer misbehaves. Look for messages with time stamps that line up with when you had the problem.
If the message is something about trying to write to a freed object, there is a bug in the driver for the printer. What probably happened is that somewhere along the line you got a software update for the printer drivers -- or should we call that a "software downgrade"! You can try going to the lexmark site and downloading the driver from there, and if the old driver works, then whenever software update offers to "update" your driver just refuse!

Ibm printer and mac compatability

Hi
i'm having quite a hard time figuring out if an old IBM Laser Printer model 4019--made in 1990 for a then $3000 will be compatabile with my ibook g4--i have a great deal on this used printer but don't knowif it will work with my mac. can seomebody please HELP me?? thank you very much.
derek

The GimpPrint/GutenPrint drivers support the 4019
http://gimp-print.sourceforge.net/MacOSX.php3

AutoCAD 2015 and MAC 10.10 (Yosemite)

Hello,
I have a MAC and I'm an architecture student. In October I installed the new operating system and my AutoCAD crash all times. So I uninstalled the old verson and installed AutoCAD 2015, because in the site of AutoDesk it is the solution. Now I'm using the 2015 version and the problem continues, AutoCAD continues closing about 10 minutes using. I talked to people from Autodesk and they informed me that it is a problem because my video card. I don't project because the problem is so alarmant. Does anyone know solver the problem? When apple will provide an update available to solve the frequent problem in its users?
grafics: Intel HD Graphics 3000 384 MB
memory: 4 GB 1333 MHz DDR3
processor: 2,4 GHz Intel Core i5

Apr 7 14:30:55 Kevins-iMac.local AutoCAD[19839]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.2 instead of 10.10.2. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Apr 7 14:30:55 Kevins-iMac.local AutoCAD[19839]: 0   CarbonCore                          0x00007fff8efd3d9b ___Gestalt_SystemVersion_block_invoke + 113
Apr 7 14:30:55 Kevins-iMac.local AutoCAD[19839]: 1   libdispatch.dylib                   0x00007fff8ed0bc13 _dispatch_client_callout + 8
Apr 7 14:30:55 Kevins-iMac.local AutoCAD[19839]: 2   libdispatch.dylib                   0x00007fff8ed0bb26 dispatch_once_f + 117
Apr 7 14:30:55 Kevins-iMac.local AutoCAD[19839]: 3   CarbonCore                          0x00007fff8ef7c3ca _Gestalt_SystemVersion + 987
Apr 7 14:30:55 Kevins-iMac.local AutoCAD[19839]: 4   CarbonCore                          0x00007fff8ef7bfb7 Gestalt + 144
Apr 7 14:30:55 Kevins-iMac.local AutoCAD[19839]: 5   QtCore                              0x0000000114bb3916 _GLOBAL__I_a + 22
Apr 7 14:30:55 Kevins-iMac.local AutoCAD[19839]: 6   ???                                 0x00007fff65d74ceb 0x0 + 140734901996779
Apr 7 14:31:22 Kevins-iMac.local AutoCAD[19839]: ApplePersistenceIgnoreState: Existing state will not be touched. New state will be written to /var/folders/xq/vdwqld_j4sb6wld63t9hjvth0000gp/T/com.autodesk.AutoCAD2015.saved State
Apr 7 14:32:02 Kevins-iMac.local LMU[19852]: 19852 Execing /Applications/Autodesk/Adlm/R9/LMU.app/Contents/MacOS/lmuopen
Apr 7 14:32:02 Kevins-iMac.local LMU[19852]: 19852 with argument: /Applications/Autodesk/Adlm/R9/LMU.app/Contents/MacOS/LMU
Apr 7 14:32:03 Kevins-iMac.local lmuopen[19852]: Launching: /Applications/Autodesk/Adlm/R9/LMU.app/Contents/MacOS/LMU
Apr 7 14:32:08 Kevins-iMac kernel[0]: process AutoCAD[19839] caught causing excessive wakeups. Observed wakeups rate (per sec): 481; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45005
Apr 7 14:32:15 Kevins-iMac.local spindump[534]: Saved wakeups_resource.diag report for AutoCAD version 20.0.51.256 Copyright © 2009-2014 Autodesk, Inc (20.0.51.256) to /Library/Logs/DiagnosticReports/AutoCAD_2015-04-07-143215_Kevins-iMac.wakeups_r esource.diag

How to install hp laserjet m1213nf printer in mac os x 10.10.1

Dear,
I need your help please.
I have HP Laserjet M1213nf MFP printer and install in MAC OS X YOSEMITE v10.10.1.
but i have no drivers for this printer.
I did check drivers in HP official site and apple store,but it also did not there.
I have Downloded drivers from Outside,but it's not working.
So, please tell me, how can i install the printer in Mac OS X Yosemite 10.10.1 ????
Thanks & Regards,

Hi kishan143,
As i understand you are unable to download the drivers for laserjet printer. Please click on the link below and download and install the printer.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r...
Please go ahead and download and install and incase if you require any further issues u can get back to us and we will assist you in resolving the issue.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"
Regards
Aneesh
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Cannot find c310 printer running mac osx 10.7.5

hi, I had a c310 connected wirelessly to a macbook pro running osx 10.7.5 working fine.
suddenly could not print, and message read cannot find printer.
tried following steps as described in different threads:
- restarting mac and printer
- uninstalling and resetting printers
- trying to add printer
but mac can't seem to find the printer
However both printer and mac are connected to the network. any clues on what to try next?
Thanks

additionally, printed the network configuration page and the netwrok config test page and both seems to be OK
Thanks

C7280 printer and Mac OS X yosemite

Similar Messages

Maybe you are looking for