C80 Reporting to French central bank of France using RFIDITSR00

Hello Gurus, I was unable, so far...., on finding how to complete the field Code Identifier in the DMEE tree format ITSR_FR_C80. This field is located in the Record Detail and should be completed with values like 09820 ; 09822 or 09821 according to the bank used for the payment. I did not find any sap documentation on this topic. the only I have is delivered by the Bank of France. Unfortunately this "lady" does not know SAP.
I would appreciate your help.
Thanks in advance.
Henri

Hello Renan,
Thanks for your answer, with the correction made by SAP.
Good to know: the document C80 issued by the French central bank conflicts with the solution made by SAP. After some inquiries It sound like this C80 document is an old document still to be replaced by a new one in compliance with the sap solution.
http://www.banque-france.fr/fr/statistiques/telechar/economie_balance/regle_bal/fiche_20.pdf
see page 3 chapter 2.9
Thanks again.
Henri

Similar Messages

Z4 report Foreign trade regulations SCB indicator (central bank key)

hello all,
i was wondering what is triggering the Z4 report Foreign trade regulations report?
Is it the SCB indicator (central bank key)?
If an invoice is missing that indicator, could it be that the report shows no output?
You can find the indicator in FB03, go to the line item of the vendor, 'more data' tab.
Actually the indicator is triggered in MIRO from materials management.
If the indicator is missing, can it be inserted through another transaction code? I have tried in FB02 but the central bank key indicator isn't changeable...
Regards,
Pamela

Hi Pamela Mungur,
I came across your thread in SDN regarding Z4 report, I am very greatful if you share your experience on below point:
1. Is SCB indicator always need to input while posting Invoices (MM or SD) or Can we input while posting Payment also.
2. How can we Ensure, user always enter SCB in transaction data, as i cannot make it as mandatory at Field status definition level.
3. I unable to find the Field to input SCB value while creating invoice through SD module.
Thanks in advance for your valuable time and effort. Please feel to ask to create new thread if required.
Thanks...Venkat

Consignment and CBI (central bank indicator)

All,
We are trying to do a consignment settlement for a Vietnam site.   The settlement fails because it is expecting a CBI (central bank indicator).   The exact error is "no batch input data for screen sapmssy3 0131 Document could not be posted.   The sender and receiver are in the same country.   Can someone tell me:
1) what determines the need for CBI?   I thought it was the fact that the sender and receiver were in different countries but this is not the case.
2) How do I get around this error to allow settlement?   Is there missing configuration or missing master data?
Thank you for your response to this.
Regards,
Sandra

I did this customizing for a German client. Never knew it is used in Norway as well.
You are right, it has to be entered manually in line items. Here is what SAP says about SCB Indicator (I highlighted the relevant text).
Define SCB Indicator for Foreign Trade Regulations
In this activity, you define information using an indicator which is needed for reporting according to German foreign trade regulations (AWV) for foreign payment transactions and which shows the reason for payment. You must enter the indicator in the line item. The reasons for payment stored for the indicator are transferred when you print the form or in the corresponding data medium exchange.
Activities
Enter the required reasons for payment using an indicator.

Central bank indicator in Norwegian vendor invoice

Hi all
We plan to use the Telepay file format for our norwegian subsidiary.
The flat file seems is compliant with the bank requirements except
that at the begininng, for the Regulatory reporting codes and
descriptions (line BETFOR04 167-172 and 173-232), we had to define them in the State Central Bank Indicator customizing.
Unless I am wrong, there is no way to have automatically
this State Central Bank Indicator defaulted when entering the vendor invoice as it is for the withholding tax code for instance.
So it seems that whenever we enter a foreign vendor invoice, we always have to fill manually this field Central Bank Indicator (BSEG-LZBKZ).
Is that the normal SAP process in Norway or can it be done another way ?
Thanks

I did this customizing for a German client. Never knew it is used in Norway as well.
You are right, it has to be entered manually in line items. Here is what SAP says about SCB Indicator (I highlighted the relevant text).
Define SCB Indicator for Foreign Trade Regulations
In this activity, you define information using an indicator which is needed for reporting according to German foreign trade regulations (AWV) for foreign payment transactions and which shows the reason for payment. You must enter the indicator in the line item. The reasons for payment stored for the indicator are transferred when you print the form or in the corresponding data medium exchange.
Activities
Enter the required reasons for payment using an indicator.

"State Central Bank Indicator" (BSEG-LZBKZ)

Hi All,
with reference to the field "State Central Bank Indicator" (BSEG-LZBKZ), for documents creted with a purchase order, I wonder when the data "State Central Bank Indicator" is filled in...
When I create the purchase order (ME21N)
Or when i execute the MIRO?
Thanks a lot
Gandalf

Hi Gandalf,
I believe,This is for a MIRO Transaction.
Because it is Comming From table RBKP and then moving to BSEG.
And it is Defined in the SPRO in the Path
SPRO>Financial Accounting>Account Rec and Acc Payable>Business trnx>Incomming invoices-->Define SCB Indicator for Foreign Trade Regulations
In this activity, you define information using an indicator which is needed for reporting according to German foreign trade regulations (AWV) for foreign payment transactions and which shows the reason for payment. You must enter the indicator in the line item. The reasons for payment stored for the indicator are transferred when you print the form or in the corresponding data medium exchange.
Hope so it helps
Regards
Anjanna.

How to print XML report in French Language?

Hi,
I need to print XML report in French language, currently it display in English language.
I have used following steps:
1. I enabled French language on my oracle apps instance.
2. Created the concurrent program with output type as XML
3. Created Data Definition using XML Publisher Responsibility
4. Created template. At the time of creation of templete, enabled Translatable check box and click Apply
5. Once template is uploaded, you will find two buttons. Export Translation and Upload Translation.
6. Clickd on Export Translation. XLF file opened.
7. In XLF file - e. g. source-language="en-US" target-language="fr-FR".Source is English and fr is for French language and FR is territory.
8. Update the target fields in French language. In the below example source field is in English language and target is in French language. This indicates that wherever the Invoice Date is present in RTF template it will be
replaced by the target field in french language.
<source>Invoice Date:</source>
<target>Date de facture:</target>
9. Updated the same for all fields and finally import the updated translation file.
10. But When i run report , output display in English not in French.
Please any one can help, what should in do next to print in French Language.
Thanks,
Sunil Mane
Edited by: 973411 on Nov 30, 2012 6:56 AM

Are you selecting the Template at the time of Program submission?
Check in the Options while submitting the Program

Standard report for cash book & Bank book

Hi Guru's,
Please tell me the transaction codes for reporting cash journal & Bank book in standard sap
Thanks.
Santosh Rothe

Hi,
For standard report for cash book & Bank book
Cash Journal : T.code FBCJ
Report - S_ALR_87012309 - Print Cashbook
You can also try this report
J3RFCASH15 - Cash Journal Reports
For Bank Book
There is no standard report for Bank Book
S_ALR_87012348 - Cashed Checks per Bank Account
S_ALR_87012349 - Outstanding Checks Analysis per G/L Account and Vendor
Please let me know if you need more information.
Regards
Sridhar M

Validation on Central bank indicator

Hello Experts,
    We have written a validation to Set up a warning message (validation) for set of company codes for their intercompany vendors to put in a central bank indicator. The pop-up field message should be: Note: If it is a foreign payment, please enter central bank indicator!
   We are able to through the validation at Posting key level(31) (Tcode F-43) .
But here our problem is to restrict the above validation for set of INCO vendors. Since the above validation is working fine but for every INCO vendor because we are restricign at Posting level but we do not want central bank indicator to be made mandatory for every INCO vendor.
    Can anybody help me in this regard?
Thanks a lot
Suresh

hi,
1)group your vendors:
-with field vbund
-own custom table
-another field of LFa1/LFb1
2) if field is not available at runtime with normal validation, use an exit like Re: Block Postings to specific account/profit center combinations
pls reward useful answers
thank you
Andreas

State central bank indicator a required field

Hello all,
when posting a vendor invoice, I need to make the state central bank indicator (BSEG-LZBKZ) a required field, for a specific company code and for specific countries. can you help me by telling me the best way to do this? thank you
Daniel

Changing field status of posting key 31 to make 'SCB / Supplying Country' (in 'Foreign payments' section) Req. Entry is one option, but that would apply for all entities in the client. The only other alternative that I can think of is to have a validation (OB28) for specific company code(s), T code FB60 or MIRO, and country DE, to throw an error message when the field value is blank.

Banking: What is the Central Bank Indicator

Hi,
I am making a test to post a vendor invoice via Tr. FB60.
I get a message from a validation to enter the central bank indicator.
What is the purpose of it?
Where can I update it? in Tr Fk02?
Thank you for your advice.
Kind regards,
Linda

The state central bank indicator is required when you create an invoice for a foreign vendor.
In some countries, the state central bank indicator is also required if the document currency is not the same as the local currency, or payment is effected via a foreign bank.
http://help.sap.com/saphelp_srm50/helpdata/en/43/1f8c03b8c606f4e10000000a422035/content.htm
Regards,
Ravi

Dummy house bank for France

Hi,
I have to create a Dummy House Bank for France. As bank account number and control key is required field, I tried to put any 11 digit number for Bank Account Number and 2 digit control key arbitrarily. But, I am getting an error message: "Bank control key and bank account number do not match"
I tried several combinations but failed.
I checked the help for control Key field and it says:
"Use Brazil, France, Spain, Portugal, and Italy:
This field contains a key for checking the combination of bank number and bank account number."
Kindly, help me to create a dummy house bank for France.
Quick reply will be appreciated.
Thanks & Regards

Thanks Neeraj.
I found a solution for it. It is because France is using IBAN, we'll not be able to put any arbitrary number.
Thanks for reply anyways...

Is there any standard REconciliation report in SAP for Bank

Hi All,
Is there any standard REconciliation report in SAP for Bank....?
Thanks in advance
Regards
Amit Mistry

Hi Ashok ,
This report RFEBKA00 imports account statements into the SAP System and
then creates batch input sessions for updating in G/L accounting and *
in the subsidiary ledger. It does not print any report - as far as I can see.
Cheers
Kartik

Need advice/help with Derogatory reporting from Wells Fargo Bank (Wells Fargo is the DEVIL)

Hello Everyone! I am new to the forum & at the ripe (old) age of 36 have finally decided to take control of my credit and financial future. Thank you in advance to those of you who contribute on here. It’s a great site.. I wish I had found it earlier in life. In any event, I am trying to increase credit scores and have two *recent* derogatoriness reported by Wells Fargo Bank for past due STUDENT LOANS. The story goes like this … my monthly payment amount due suddenly changed from $150.00 (even) per month to $150.80. Because I obtain online only statements and was busy with life (taking care of mom with dementia etc) I didn’t realize the change and logged in for a few months and only paid $150.00. Wells Fargo subsequently reported me as “30 days past due" for the months of June & July 2014 for the $1.60 balance. Really Wells Fargo???? When I realized the derogatory reporting, I of course called Wells Fargo and protested. I then followed up with a “good faith request to remove letter” or whatever it's called. I sent it to: ATTENTION: Credit Bureau Dispute Resolution Department (CBDRU)301 East 58th Street NorthSioux Falls, SD 57117-5185 However, Wells Fargo responded with “the reporting is accurate and will remain as reported.” ***HOLES! All over $1.60??!? Before the incident I was frequently late (not a very good customer) but since Jan 2015 I have paid like clockwork and ON TIME every month. So, I am planning another course of action. I am wondering if anyone knows someone at Wells Fargo that I can address another letter to or call. I refuse to believe some human with a heart will let this stand. Any (backdoor info) or suggestions are GREATLY appreciated. Oh. It may be important to note that I was also 30 days past due back in Oct 2010. This was "valid" and I never contested that. Blessings to everyone!

LeeRivers wrote:
The story goes like this … my monthly payment amount due suddenly changed from $150.00 (even) per month to $150.80. Because I obtain online only statements and was busy with life (taking care of mom with dementia etc) I didn’t realize the change and logged in for a few months and only paid $150.00. Wells Fargo subsequently reported me as “30 days past due" for the months of June & July 2014 for the $1.60 balance. Really Wells Fargo????It is unfortunate but it is accurate and they're under no obligation to remove. All you can do is to try to escalate but that may not even lead to a removal. LeeRivers wrote:
Before the incident I was frequently late (not a very good customer) but since Jan 2015 I have paid like clockwork and ON TIME every month.That's not going to help your case. A few months on being on time is a plus but it's not going to overcome a track record of requently being late. Derogs tend to have a major impact in general but a creditor is probably less likely to consider goodwill in a case like this versus a customer that has always paid on time and just happened to misread the amount due a couple of times. Good luck with it.

Central bank indicator

Hello all,
I have got a question about central bank indicators.
In our SAP system the central bank indicator is flagged as required in the field status group of the reconciliation account,
When I post an invoice to a cross border vendor in our Germany company code it asks me to fill in a central bank indicator.
When I post an invoice to a cross border vendor in our Norwegian company code it doesn't asks me for the central bank indicator.
Do you know why in one company code it is required while in the other company code it's not?.
The vendors in both company codes have central bank indicator as required in the field status group of the reconciliation account
Thanks for your help
Latifa

Have you checked recon acct for the relevant companies has been assigned consistently for all the relevant companies.
Have you tried to use GGB0/GGB4 validation activation is activated for the relevant companies instead.

Loading complex report data into a direct update DSO using APD

Dear All,
Recently, I had a requirement to download the report data into a direct update DSO using an APD. I was able to perform this easily when the report was simple i.e it has few rows and columns. But I faced problems If the report is a complex one. Summing up, I would like to know how to handle the scenarios in each of the following cases:
1.   How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
      key fields of DSO and the remaining to the data fields? Correct me.
2.   What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
      system and then include these in the DSO data fields to accommodate the extracted data ?
3.   How do I handle the Free Characteristics and Filters ?
4. Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
     use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
     shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
I would appreciate if someone can answer my questions clearly.
Regards,
D. Srinivas Rao

Hi ,
PFB the answers.
1. How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
key fields of DSO and the remaining to the data fields? Correct me.
--- Yes , you can use the elements in the ROWS in the Key fields, but in case you get two records with same value in the ROWS element the data load will fail. So you basically need to have one value that would be different for each record.
2. What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
system and then include these in the DSO data fields to accommodate the extracted data ?
Yes you would need to create new Infoobjects for the CKF's and RKF's in the Report and include them in your DSO.
3. How do I handle the Free Characteristics and Filters ?
The default filters work in the same way as when you yourself execute the reoprt. But you cannot use the Free characterisitics in the APD. only the ROWS and cloumns element which are in default layout can be used.
4. Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
--- Yes you would need to create 10 different APD's. Its very simple to create, you can copy an APD. but it would be for sure a maintance issue. you would have to maintain 10 APD's.
Please revert in case of any further queries.

C80 Reporting to French central bank of France using RFIDITSR00

Similar Messages

Maybe you are looking for