C887VA modem firmware via SNMP

The dutch isp KPN started to enroll VDSL vectoring, the problem is that several dsl-modem firmwares, embedded in the ios, don't support vectoring.
In the best case this means the line will train in on ADSL instead of VDSL but there are also a couple of firmware versions which are blacklisted and then the router will no longer establish a connection at all, so not via VDSL and not via ADSL.
I'm trying to use snmp to read-out the current firmware-version of the dsl-modem in the 700+ cisco 887va(g) routers we manage, but I can't find the oid.  Does anyone know if this oid exists and if so, what the oid is...?

I'd like to use my own script to do the upgrades. Which would be easy to do with SNMP if I new the right OIDs to set...
Don't have WLSE or CiscoWorks RME.

Similar Messages

  • Interface errors (crc, in/output, collisions etc.) via snmp

    Hi,
    I'm trying to understand how to get interface errors via SNMP.  I do get stats via SNMP for ifInErrors / ifOutErrors etc, but I'm trying to get output via SNMP for the errors visible via the 'sh int x' command - CRC errors, input / output errors, collisions, runts. giants etc.).
    1) The SNMP ifInError / ifOutError seems to give an overall counter of all errors from the time the device has started - Am I correct about this?
    2) Is there any way I can get the interface-specific errors noted above via SNMP?
    Thanks,
    Mario

    Depends on the device and version of code, but most likely you will get what you want from the CISCO-IF-EXTENSION-MIB.  Look at objects like cieIfInRuntsErrs, cieIfInGiantsErrs, and cieIfInFramingErrs.  You will also get some ethernet-specific errors from the ETHERLIKE-MIB.

  • How do I get the Username of an AnyConnect VPN session via SNMP?

    I would like to monitor the usernames of my AnyConnect sessions via SNMP.  This will allow me to monitor, graph, report, and alert using Solarwinds Orion (or any other SNMP software).
    I would like to monitor this on my ASA 5520. I have run the show snmp-server oidlist command and I can see all of the OID's that I can poll. However, the OID I would like to poll crasUsername (1.3.6.1.4.1.9.9.392.1.3.21.1.1) is not working.
    Does anyone know how I can monitor the username of a AnyConnect session via SNMP?
    Below is a link to a great MIB reference for ASA Remote Access Monitor OID list.
    http://www.mibdepot.com/cgi-bin/getmib3.cgi?i=1&n=CISCO-REMOTE-ACCESS-MONITOR-MIB&r=cisco&f=CISCO-REMOTE-ACCESS-MONITOR-MIB.my&v=v2&t=tree

    Hello PDX,
    Welcome to the HP Support Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How to check current input/output rate on router subintenterface via SNMP?

    How to check current input/output rate on router (2821, etc..) subintenterface via SNMP, like cacti monitoring system.
    I cant find OID to make this with snmpwalk.
    Or there is no way to check current load by this way? Only polling?
    P.S. Ethernet subinterface, of course.
    With great respect, S.A.

    Hi,
    Try to use:
    1.3.6.1.4.1.9.2.2.1.1.6 - InBitRate
    1.3.6.1.4.1.9.2.2.1.1.8 - OutBitRate
    1.3.6.1.4.1.9.2.2.1.1.28 - ifDescription

  • Monitor OSPFv3 via SNMP not working - Is OSPFv3 MIB supported?

    I need to be able to query the OSPFv3-MIB via SNMP to track the status of OSPFv3.
    I have setup a 3945 router in a test lab network and I have configured it in an Ipv6 network with OSPFv3.  The router has an active OSPFv3 neighbor and I can use that neighbor to send/receive data (the routing is working fine).  However, when I walk the SNMP MIBs I don't get a response for the OSPFv3-MIB.  According to the Cisco SNMP Object Navigator this MIB should be located at 1.3.6.1.3.102.*.  Below is an example trying to query a particular OID from the OSPFv3 MIB.
    C:\>snmpwalk -v 2c -c public 197.16.18.1 1.3.6.1.3.102.1.5.1.8
    SNMPv2-SMI::experimental.102.1.5.1.8 = No Such Object available on this agent at  this OID
    I can walk other parts of the MIB (For example the OSPFv2 MIB) and get responses, so I know the router has SNMP turned on.
    Looking at the Cisco IOS Mib Locator tool (http://tools.cisco.com/ITDIT/MIBS/MainServlet?IMAGE_NAME=c3900-universalk9-mz.SPA.152-4.M3.bin) for the current software version I am running (c3900-universalk9-mz.SPA.152-4.M3.bin) on a 3945 router it claims that the OSPFv3 MIB is supported in this image.  
    Maybe I need to configure something else?  Maybe my SW doesn't really support this MIB?  Could it be that I have to query the router over Ipv6 to get the OSPFv3-MIB (I have only been trying Ipv4)?

    Hi ,
    As Vinod suggested , you need to configure the "SNMP CONTEXT"
    Configure:
    ==========
    Basic configuration consists of 4 steps:
    Configure mapping between VRF name and SNMP context :
    snmp-server vrf <vrf_1> context <context_1>
    Create community string corresponding to the VRF :
    snmp-server community <vrf_1> RW
    Define context string
    snmp-server context <context_1>
    Configure mapping between context and community:
    snmp-server community-map <vrf_1> context <context_1>
    (optional) Configure snmp server traps for this VRF community
    snmp-server host <IP> traps version 2c <vrf_1>
    For e.g:
    snmp-server vrf miki
    context miki_bgp
    snmp-server community miki RW
    snmp-server context miki_bgp
    snmp-server community-map miki context miki_bgp
    Hope it will help
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ***

  • I have bought Iphone 4 in UK and unlocked it normally and bought to india . I have then updated to IOS 5 . its working properly . Now i want to update to IOS 6 . Can i do it without geting locked . phone modem firmware is 04.12.01

    I have bought Iphone 4 in UK and unlocked it normally and bought to india . I have then updated to IOS 5 . its working properly . Now i want to update to IOS 6 . Can i do it without geting locked . phone modem firmware is 04.12.01

    followed someones instructions and it has worked ios 5 is now working on my iphone 4

  • How to restart base station via SNMP ?

    How to restart airport extreme via SNMP, with snmpwalk for example ? I can get a lot of information from base station with snmpwalk and airport-mib but still mystery what to poke when I want reboot base station over network.

    You are likely forgetting a step.
    Open AirPort Utility
    Click on the Time Capsule icon
    Click Edit in the small window that appears
    Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
    Click Restart

  • Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help

    Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.

    Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?

  • Cisco Modem Firmware (HWIC) upgrade Process

    HI experts, 
    I need to upgrade firmware of my LTE ( Hwic) module for the router 2901. I am wondering if this is the part of IOS upgrade process , I mean ones I upgrade IOS to the latest version will it upgrade my modem firmware by own or I need to upgrade LTE modem separately?
    can you guys please share your experience here?
    any docs on this please?
    Thanks!

    Hi,
    The LTE module is part of main Cisco IOS you load into the router.  Once you upgrade the IOS, it also applies to the module.
    ntegrated 4G LTE WWAN broadband: With the 4G LTE WWAN modem integrated into the router, you gain the benefits of simplified installation and management. In addition, the Cisco 4G LTE WWAN EHWICs are tightly integrated with Cisco ISRs, which run the industry-leading Cisco IOS® Software, giving access to all the advanced features of Cisco IOS Software such as quality of service (QoS), intelligent network queuing, and robust security.
    Link:
    http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/4g-lte-wireless-wan-enhanced-high-speed-wan-interface-card/datasheet_c78-710314.html
    HTH

  • No ifIndex table when querying via SNMP

    Hello, looking for suggestions before opening up a TAC case.
    Just received a Nexus 3000 with NX-OS 6.0(2)U2(1) and when I attempt to walk the ifTable via SNMP the ifIndex table is not present. Walking the ifIndex table itself results in  "IF-MIB::ifIndex = No Such Instance currently exists at this OID". show interface snmp-ifindex is fine and the rest of the ifTable displays properly.
    My switch config is just a basic RO community with no ACL's or anything yet. A pair of the same switches with NX-OS 5.0(3)U5(1a) display the table no problem.
    Any suggestions, or has anyone else seen this?

    Did you navigate the FireFox plugin to the DB file that is in the Simulator app bundle:
    /Users/YOURUSERID/Library/Application Support/iPhone Simulator/User/Applications/SYSTEMGENERATED_NAME/YOURAPP.app
    or
    /Users/YOURUSERID/Library/Application Support/iPhone Simulator/User/Applications/SYSTEMGENERATEDNAME/Documents
    Message was edited by: xnav

  • Incorrect bandwidth values via snmp?

    I have two cat 2900 16 port switches, for some reason when i read the bandwidth utiliz. values via snmp (PRTG, and MRTG give same results) i only show a steady 1-1.5 kbps up and down flow with occasianal spikes of the upstream to 2 or 3kbps..this is the same across all ports, now if i send something across the switch, nothing changes, nor is any other traffic i throw at the switch reflected... the peculiar thing is if i access the switch's web interface while conducting a 10.5 mbit transfer across the switch, i will see a spike of correct values (as i read on the hosts machines) reported by the snmp agents but only for 2 or 3 reads across 5 second periods..then its back to what i described again.. I've done factory resets on both and both of these snmp agents correctly read the bandwidht values from my dell and intel switches so i've ruled the agents out..
    any ideas?
    thanks, joe

    Thanks for the quick reply but thats not the problem. its not a units issue as i see somekind of traffic but when i'm maxing out the 100mbps port i see no change in the snmp reported graphs..but like i said i will see the actual values if i'm reloading or access the switches web interface.
    this is such a weird issue..and its affecting two swithces that are the same model but from different places.
    any ideas?

  • What is defference between updating Firmware via P...

    I'm N85 user and I want to know What is defference between updating Firmware via PC an Via Device manager on phone?

    Firmware updates are usually released via one method or the other, rarely via both.
    The NSU method downloads entire ROM images from Nokia's servers, resulting in downloads of more than 100MB in some cases.
    The FOTA method only downloads what has changed from the version running on your phone to the latest version available. This means much less data to download, usually around 4-6 megabytes, which is important if you don't have access to a wireless network and have to use your operator's packet data service.
    The FOTA method is safer (because it doesn't involve a computer running a notoriously flaky operating system) and faster (because there's less data to download).
    Otherwise, the end result is the same.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • TS1559 I believe it my have something to do with my modem firmware , I have a iphone 4 and no problems but i changed the sim card in my 4s and the firmware seems to be an older version could that be a problem

    I have a 4-s and a 4 I changed the sim card in my 4-s and now my wifi is not working, grayed out in fact, I also noticed that the modem frimware was an older version now on the 4-s than the 4, HELP

    The modem firmware has nothing to do with the SIM card or WiFi.  Was your 4S EVER jailbroken?,  See this reguarding grayed out WiFi setting:
    iOS: Wi-Fi settings grayed out or dim

  • TCL or EEM scripts to do TDR testing via SNMP?

    Does anyone know of any EEM or TCL scripts to do TDR testing via SNMP?  Is it even possible?

    I do not, and I didn't see anything obvious on Cisco Beyond.  There is a CISCO-CABLE-DIAG-MIB which could be used to start tests, and get their results.  This MIB is supported on a few different device types, and could be used in conjunction with EEM to start and monitor TDR tests.

  • IPhone 4 (not S) - iOS 7 - Modem Firmware will not update

    I updated my iphone 4 from ios 5.1.1 to ios 7.0.2 today mainly to update my modem firmware since my connectivity is very poor.
    I read online that updating should help, but the firmware is still at 3.0.04 not at 4.12.09 that wikipedia shows it should have updated to.
    My phone is not jailbroken and I updated to ios 7 with itunes. What gives?
    My phone model is MD146LL/A and itunes installed ios version 7.0.2 (11A501)
    Thanks for any insight.

    Hi clarkfus,
    Thanks for visiting Apple Support Communities.
    Since this behavior is affecting multiple devices, I recommend first troubleshooting iTunes on your computer(s) using the article(s) below:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Best Regards,
    Jeremy

Maybe you are looking for

  • Help "iTunes has encountered a problem and needs to close..."

    I have windows XP with service pack 2 installed and downloaded iTunes from the apple website, when i click on the iTunes icon on the desk top or from the itunes folder it will not open, I get the following error "iTunes has encountered a problem and

  • How do i download my windows package ???

    Okay so i bought a mac book air today and it doesnt have CD unit and I dont have a USB cabke to transfer it from my  other computer, What can i do ???? I need ASAP aswell as its for school !

  • Error during OS update

    I tried to update the latest OS, error message appears in the middle of updating. iTune logo and connected appeared on iPad screen. iPad does not work since then. Any. Suggestion?

  • Critical problems with X1 Carbon updated to Windows 8.1

    I've updated my X1 Carbon 346082G to Windows 8.1 64 bit using the store update app, then downloaded the updated drivers for the X1 Carbon 3460 download page and... The updated camera driver doesn't seems to find the integrated camera. Skype doesn't f

  • How to create a transaction for table maintanence?

    Hi Experts,   How can i create a transaction for insert/modify/delete entries for a table?