C891 advipservices IPS license problem

Hi forumers'
my C891 router IOS is using 15.1 adipservices, which shoudl have IPS and misc security features
my question is
1. IPS license status is not installed
i able to load the IPS signature into the box. would this causing the IPS not running on my router?
2. ios-ips-update enable is NO
what should i do in order to make this running? is it involving licensing issue?
please suggest what to do in order to let IOS IPS running on the router, thanks
Noel

Hi Sir,
Thanks for the reply.
Just few more question with it, cause I'm not familiar with cisco licensing.
question 1
So this C890 box enable to have IPS feature on it? To make it running is it i should apply for Cisco Services for IPS trial license (Version 6.0.x and earlier) \ Cisco Services for IPS on IOS?
question 2
After 60 days expired of trial license, what will happen on the device IPS services?
question 3
tor the license type :Evaluation, what should i do to make it eligible to use?
thanks
Noel

Similar Messages

Problem activating IPS license on SA540

Hi everyone,
I'm having problems with the activation of the IPS license for a SA540 firewall. I've tried both methods: License Code PAK from Cisco.com and License File downloaded from Cisco.com but it doesn't work.
It seems that the .lic file that I received by email is damaged or something like that.
Does anyone have any suggestions?
Thanks, regards.
José Naranjo

Hi Jose, most likely the problem is the platform entry for the PAK. You need to call the SBSC to escalate to GLO (global licensing).
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
-Tom
Please mark answered for helpful posts

New hard drive and photoshop license problem

I have a Dell Inspiron 6000 with a 1.5 Ghz Pentium processor, 2 GB of RAM, and Win Xp/Pro SP3.
The hard drive in this computer failed, and it has been replaced. I used an image backup from Acronis True Image 10 to "restore" the new disk.
Now, when I try to open Phostoshop CS2, I receive a message that the license is no longer valid (I have been using this version of Photoshop for a long time).
I don't have this problem with InDesign CS3 (v. 5.0.2), FrameMaker 7.2b144, or Acrobat 8.1.6.
I didn't find any helpful info on the "Product Activation" web page.
I tried a forum search and a search of Adobe.com using the search criteria "new hard drive and photoshop license problem."
The only relevant item I could find is this:
"Backup and restoration of your system using standard tools do not require reactivation. While reactivation after backing up or restoring the system was required in early versions of Adobe software (such as Adobe Photoshop® CS), Adobe has continued to improve the activation process with new technology that eliminates the need to reactivate after system restoration. In complex situations where the system is being upgraded, we recommend deactivating the Adobe software before commencing the system upgrade. Once the system upgrade is completed, the subsequent install/restore will require reactivation, which is typically accomplished without difficulty and is completely transparent to the user."
So does that mean I have to "reactivate" Photoshop CS2? If so, do I use the Activation window that is displayed when I open Photoshop? The serial number has 20 characters. Will the Adobe (re)activation recognize this old serial number? If not, what do I have to do to get this product usable again?
Please help.

>replaced your hard drive and CS2 DRM is looking for the old hard drive number and not finding it
Interesting... I use http://www.terabyteunlimited.com/image-for-linux.htm which creates a bootable CD and runs outside of Windoze
I have made image files and loaded those files to a new hard drive (I use drive swap hardware to make a backup and create a new drive every time I install or uninstall major software) and have never had any program complain about needing activation
But, since the program I use is Linux on a bootable CD, it copies EVERYTHING on a hard drive, even the hidden registration areas as far as I can tell, so when I do a restore to a new drive, everything is put on the new drive

Old Mac died. Have PE 9 and while it installs I get a licensing problem I have the original discs and the serial

Old Mac died. Have PE 9 and while it installs I get a licensing problem I have the original discs and the serial. How do I fix this? I don't need the new version and I just want to use what I have already paid for. Error 213:5

Did you migrate over the data from your old computer? If so, there's probably something you brought over that knows it's not on the same hardware as before. In that case you need to run this:
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
and then go around and manually remove all the bits and bobs, not just from applications but also from hard drive>library>application support>adobe and from your username>library>preferences. Spotlight will not help you. You have to go looking on your own.
If that's not it--you just a message that you've used up your activations, you need activation support:
Activation & Deactivation Help
Start a chat session and they can get you straightened out.

License Problem .. what do I need ...

Dear all !
I have some license problems .. and want kindly ask for
advise ..
I had time fixed license which works fine ..
and then I got an update for the license ..
and merged the old and the new license with
the updateLicensefile.sh script ..
But when I start a container with > startWebLogic.sh
I got WebLogic: license has expired on Thu Sep 13 12:00:00 CEST 2001!
. and he seems not recognize the new license ..
So I tried to check which parts are missing ..
Expried is Connector, QASuite .. do I need them ?
For WebLogic, "SSL/Export, 2PC, In-memory Replication - Servlet,
In-memory Replication - EJB. EJB 1.1, EJB 2.0, JMS, Cluster,
Clustered JMS, jDrivers ..I have new licenses .. but
they are in a new license-group .. not
longer in release="6.1"
<license-group format="1.0" product="WebLogic Server" release="*">
So I'm really confused, what to do .. and
what is the missing license ?
My customer number is : DEU100683
Can anybody be so kind to help me out of this ?
The other question is, does BEA also provide normal
access to the newsgroups via nntp .. I would
prefer this .. which one is the nntp server ?
Thanks a lot !
Frank

Frank,
The java weblogic.Admin LICENSES utility lists the license that the server
is using.
If you had multiple licenses and did not know which one was being picked
this utility will help you.
http://e-docs.bea.com/wls/docs61//////adminguide/cli.html#1134397
Regarding the documentation error can you paste the url where you found the
error. I will make sure I inform the person responsible for that.
Regarding the information returned by the license utility I will follow up
with Engineering to check if it would be possible to change the format
returned.
Thanks
Raj Alagumalai
Frank Grützmacher <[email protected]> wrote in
news:[email protected]:
>
>
Raj Alagumalai wrote:
Frank ,
Regarding the UpdateLicense-script issue, the order in which the new
license is appended should not matter. As long as the server is able
to read the information from that file.
Please refer to this url for more information on the showLicenses
utility. This utility will provide information on what license the
server is using.
http://e-docs.bea.com/wls/docs61/////adminguide/utils.html#1117307
Hope this information helpsDear Raj !
Thanks a lot at first ..
but :
java utils.showLicenses .. doesn't really help , because
on the workstation it brings me : java.lang.NullPointerException ..
without
any further information and without stack trace ( this should be added
of course )
I also used .. weblogic.Admin which works to show the licens
information ..
but t seems only to list the contents of the license.bea in another way
not whether any of the liences makes sense and is valid ..
Then I also tried :
java utils.writeLicense ..
not very helpful too in this case .. also list only
the contents .. something like : you have a valid license
until xxx .. of this yyy components would help
more ..
BTW .. the documentation is wrong .. the Property is : bea.home ..
not bea.system.home .. and the example on a unix console with
-Dbea.home=d:\bea60 shows two things
a) this was not updated for 6.1 ..
b) you differ not , whether you are on unix or dos .. but you should
But this is all not important .. shows only that also BEA if far away
from being perfect,
this is from a developer point of view good .. because everyone is
failing somehow
every day .. but the license problem should not occure !
I sent the problem on Thuesday to the support , to see what can be done
so far no answer !
Thanks again for your kind help and hints !
Frank

2012 Licensing Problem

I would like to make everyone aware of an issue with RDS and the FIX from Microsoft services which I consider unacceptable.
The setup is as follows. One 2012 DC with Terminal server licensing installed. Two 2012 servers with RDS enabled. Take note that RDS was NOT deployed using the wizard as there is no need
for all of the resources of a server farm for 2 servers. On each of the RDS enabled servers, group policey was used to enable and specify the RDS server and licensing mode. The RD Licensing Diagnoser was used to verify, and report that no licensing
problems for the Remote Desktop Session Host Server existed, and the tray icon that reports that you are running a trial version of RDS does NOT appear.
Advance forward a few months and users start reporting that they cannot login and that they are receiving “The remote session was disconnected because there are no RDS license servers available
to provide a license."
After doing all that I could I filed a case with Microsoft Support at the Highest Level Possible. After a month I finally was able to talk to someone. After 2 more weeks, here is the solution
they gave me….
Open the registry, Navigate to HKLM\System\CurrentControlSet\Control\TerminalServer\RCM
Delete the GracePeriod Key
Reboot
This continues to occur every few months. I wish someone at MS would FIX the problem.
Lee

sure.
i have 5x 2012 RDS farms, nearly identical in configuration dispersed throughout the globe, each farm has:
2x RDSH
1x RDCB, RDWeb, RDLicense server with 2012 CALs deployed as User Mode
We are pointing directly to the license server in our collection settings (only 1 collection per farm) and also again via GPO settings to override license server auto discovery options
These systems were rolled out using scenario-based installs so while RDWeb is there, it's not actually being used (nothing published to it), users are leveraging session-based desktops via RDP client both internally and externally
systems are all domain joined, we're still on 2003 functional level in AD
i first encountered this issue around the 120 days mark after the first farm went into production, we saw that users could not login and event ID 1130 was being thrown for every login attempt.
i saw this article and followed the steps to resolve it:
http://www.360ict.nl/blog/no-remote-desktop-licence-server-availible-on-rd-session-host-server-2012/
however, after another 120 days passed, i ran into the same issue again, realizing this was not a permanent fix. after just opening the case with MS on this a couple of weeks ago, they've told me it's a bug and so for now, i proactively purge the
L$RTMTIMEBOMB_nnnn key under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM\GracePeriod, i restart
TermService so i don't have to reboot the whole box and it's fine for another 120 days
during the issue and even when it's not occurring, licensing diagnostics come up clean, i haven't taken a report while the issue is occurring but when it's not occurring the reports show CALs being assigned to all users by the license server.
basically, it seems like even though we have a license server that is activated with user CALs, the Review section shows green checks under both sections, and reporting is fine - the system is stuck in 120 day trial mode for some reason.
now MS did say they know about this and they're working on a fix, hopefully not to just get me off the phone, but they didn't have a different workaround and advised that i continue doing what i'm doing.
what i don't really understand is that when i remove the L$RTMTIMEBOMB_nnnn
key from the registry, it gets recreated upon the first user logon that has to go talk to the license server. in a working 2012 environment, should this key even exist if an active license server is already available?

As soon as I try to open PDF a "licensing problem" screen appears...

I have reinstalled reader software but get the same message.

Hey -
Thanks for taking the trouble to respond - appreciated. I did post the details you requested and sent you IM about that. Anyway, the problem
appears to have fixed itself as soon as I opened Acrobat9 Pro it
reconfigured itself and everything is working again!
_Den
Date: Mon, 5 Dec 2011 20:22:47 -0700
From: [email protected]
To: [email protected]
Subject: As soon as I try to open PDF a "licensing problem" screen appears...
    Re: As soon as I try to open PDF a "licensing problem" screen appears...
    created by ʇɐb ɹəuəllıʍ in Adobe Reader - View the full discussion
What is your operating system? Can you post a screenshot of that screen?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4065853#4065853
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4065853#4065853. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Photoshop Element 9 is not running on my new Dell E7240 laptop. Erreur :231:10. How can y solve the problem. Is it a license problem? My PC is very new, and PS9 is al little bit older.

Photoshop Element 9 is not running on my new Dell E7240 laptop. Erreur :231:10. How can y solve the problem. Is it a license problem? My PC is very new, and PS9 is al little bit older.

fixed with this method:
http://bbs.archlinux.org/viewtopic.php?pid=319710

Ips license renew

I have 2 ips license of cisco asa and one of them i has been used but i dont know which one has been used so how could i know which one used, what is the validity period and how could i update license if required please try to provide me each and every step of detail process ?
thank you

Hi,
You can check the license status on IDM/IME on home page. Or using 'show version' in IPS CLI.
Check this for understanding the procedure to obtain license:
http://www.cisco.com/en/US/docs/security/ips/6.0/configuration/guide/cli/cliObtSW.html
In case you've never purchased the license, you will need to contact your Cisco reseller.
HTH.
Regards,
Sourav Kakkar

MSSQLServer license Problem

I have downloaded WLSERVER6.1 for evaluation and when i try to run database connectivity from SQLServer200 it gives the license problem.The error is like thisjava.sql.SQLexception: $$$$$$$ License Exception $$$$$$$Missing License file for: Weblogic Server 6.1$$$$$$$$$ License Exception $$$$$$$$$$$$$$So any one can help

Make sure you add the bea home (folder in which you will find license.bea
file) to your classpath.
"Fahad" <[email protected]> wrote in message
news:3b8269ed$[email protected]..
I have downloaded WLSERVER6.1 for evaluation and when i try to rundatabase connectivity from SQLServer200 it gives the license problem.The
error is like thisjava.sql.SQLexception: $$$$$$$ License Exception
$$$$$$$Missing License file for: Weblogic Server 6.1$$$$$$$$$ License
Exception $$$$$$$$$$$$$$So any one can help

JCom License Problems on WLS 7.0

I've read through the various threads posted here on people hitting licensing problems
with JCom. Unfortunately, I seem to be having the same problem however the workarounds
suggested by others don't seem to be solving my problems.
I'm trying to get a bare bones example of a Java2Com application running. I'm
using WebLogic 7.0 SP1 on Win2k. Whenever I run my example, I get the following
error:
J-Integra 1.5.0 SB004 Copyright (C) 1999-2001 Intrinsyc Software Inc. http://www.intrinsyc.com/j-integra/
java.lang.RuntimeException: No valid licensing information found.
java.lang.ExceptionInInitializerError: java.lang.RuntimeException: No valid licensing
information found.
Can someone please give me a step-by-step breakdown as to what I'm supposed to
do to get JCom working?
Thanks,
Brian.

I've read through the various threads posted here on people hitting licensing problems
with JCom. Unfortunately, I seem to be having the same problem however the workarounds
suggested by others don't seem to be solving my problems.
I'm trying to get a bare bones example of a Java2Com application running. I'm
using WebLogic 7.0 SP1 on Win2k. Whenever I run my example, I get the following
error:
J-Integra 1.5.0 SB004 Copyright (C) 1999-2001 Intrinsyc Software Inc. http://www.intrinsyc.com/j-integra/
java.lang.RuntimeException: No valid licensing information found.
java.lang.ExceptionInInitializerError: java.lang.RuntimeException: No valid licensing
information found.
Can someone please give me a step-by-step breakdown as to what I'm supposed to
do to get JCom working?
Thanks,
Brian.

Audio and Licensing Problems

   I recorded a clip 1 hr and 50 min long using Sony PMW-EX1 in SD to On Location, exported the file in m2t format to external hard drive, then imported to Pre Pro CS3 on my editing computer. I loaded the clip into time line to begin editing and the first 30 min of audio played normally, then it started over to the beginning. The last 30 mins. of audio were lost. The 1 hr and 50 min. of video was normal. There is nothing wrong with the clip- it plays normally in Nero Show, and plays normally in On Location. This has happended to me before and I reshot the clip and all was well. This one can't be reshot. .
   I tried making a new preferences file- no help. I then reinstalled Pre Pro- no help. I tried reloading the clip .several times- no help. I reinstalled Pre Pro again- oops- now my license has stopped working. I've tried phone support several times, and I've tried web support. Phone support said they would call me back- they didn't. Web support suggested downloading and following the steps of an article from their knowledgebase (KB401528). I did so and this didn't work. When I went back to the article the message said this article doesn't exist. Now there's a problem with the website that won't let me submit messages- they disappear and aren't received. It seems all modes of communication with tech support are blocked.
   I'm really frustrated with Adobe Support. I see a letter explaining there are problems with tech support- no kidding. Does anyone out there have any suggestions? This is a commercial project with a very fast approaching deadline- all suggestions would be appreciated. First issue is to fix license problem because Pre Pro won't even open. Also need fix with audio problem. Thanks- Dorian

Dorian,
I take this to mean that you have one internal HDD (Hard Disk Drive), your C:\. It contains all of your OS and programs, plus your Windows Virtual Memory (Page File). All of your media, your Project and your Scratch Disks are on your external. Is that correct?
What is the connection type for that external, i.e. USB 2.0, FireWire 400 (IEEE-1394), FW-800 (IEEE-1394b) or eSATA?
USB 2.0 will yield really poor performance, and many have had issues using externals with this connection. FW-400 is a bit better, and likely a touch more stable, but FW-800, and especially eSATA, are much better to edit to/from. I use a bank of FW-800 externals, as I swap Projects between several computers and have not had an issue, plus the speed is OK.
Sorry to hit you with confusing questions. I'll break things down a bit more, and try not to use as much jargon in the future.
Good luck,
Hunt
Message was edited by: the_wine_snob - Edited typo

SA520 - IPS license installing

Hi everybody,
I'm installing a new SA520 and when try to install IPS license (Administration --> License management --> Install), I get always same message
"License installation failed for more details please see event logs".
I have tried using "License Code (PAK) from cisco.com:" option as well as "License File downloaded from cisco.com:" option (I got .lic file with 'Cisco Software License Activation Key' email received days ago), with sames results.
Any 'idea what should I check out?
Thanks.

First check this:
IPS Status: Displays the IPS Signatures status including the IPS license expiration date, the signature file version, and the date that the security device last checked for signature updates.
-    Click the View IPS Logs link to view the IPS log messages. To display messages generated by IPS, you must choose IPS as the facility. For more information see Active Users, page 213 on admin guide.
Once you've checked that.. try these instructions again and let me know if it worked:
For an IPS license, select one of these installation methods from the Install License page:
•    Installation License Type
-    License Code (PAK) from cisco.com: Automatically retrieves and installs the license on the device from the Cisco server. To use this option, enter your PAK ID and Cisco.com username and password. These credentials are required for the device to authenticate to the Cisco server.
Make sure that the security appliance is set to the current time, or the license will not install properly. See Configuring the Time Settings, page 184.
-    License File downloaded from cisco.com: Installs a license that was previously downloaded to your PC.
•    Select Transfer File: If the license file is located on your PC, or on a USB device, you can download it to the security device. Click Browse to locate and select the license file.
After you finish entering the information in the required fields, click Validate License. Click Back to return to the License Management page.

How do I download ASA5500 IPS license file?

Our Management Provider is requesting for ASA5500 IPS license file to be uploaded to our ASA. We have already renewed our firewall contract with Cisco. Is this not automatic?

As long as your service contract is properly associated with your ASA and it has the "IPS" in the covered part number, the entitlement is included.
There's no separate license or activation key to use. Signature updates happen by virtue of the ASA serial number being registered with Cisco.
Note that the End of Sales / End Of Life announcement for all the legacy IPS products was put out in October 2014. No new purchases will be sold after next April. Customers are encouraged to move to the ASA with Firepower services Sourcefire technology).

Ips license error

i have sa520 and i cannot validate the license i have downloaded from cisco ( i have a xxxxxxxx.lic file)
when i choose validate i have error <license installation falied> below is the log files
cslLicenseFileInstall: Status of license install for license: 0 is UDI in license line does not match with the local udi
Component: PLATFORM
Sat Feb 19 23:27:48 2011(GMT +0200)
INFO
System
cslLicenseFileInstall: successful: 0, failed: 1, existing: 0
Component: PLATFORM
Sat Feb 19 23:27:48 2011(GMT +0200)
ERROR
System
cslLicenseFileInstall: 1 license in license file could not installed
Component: PLATFORM
Sat Feb 19 23:27:48 2011(GMT +0200)
ERROR
System
cslConfigTblHandler: Failed to install license from file DNI1425F04W_20110215003211738.lic
Component: PLATFORM

Thank you for your answer
Product ID sa520-gw25-bun3-k9
sn dni1425f04w
2011/2/23 biraja
nsotis28n,
>
A new message was posted in the Discussion thread "ips license error":
>
https://supportforums.cisco.com/message/3299570#3299570
>
Author : biraja
Profile : https://supportforums.cisco.com/people/biraja
>
Message:

C891 advipservices IPS license problem

Similar Messages

Maybe you are looking for