C897-VA-K9 Version 15.2(4)M6dialer 0 interface high gig outbound traffic issue

Hi  i have recently upgraded  one of my branch office router from  C876 to  C897-VA-K9, and after 1 week i deployed the new router  i started to see 1 gbps + traffic in my dialer 0 interface outbound in my MRTG. and  after i restarted the router the graph looks normal for 5 to 6 days and  detects gig traffic  and the graph keeps  moving up from 1 gbps+ to  2gbps + and so on and  keeps up until restarted.
1# sh int dialer 0
Dialer0 is up, line protocol is up (spoofing)
  Hardware is Unknown
  Description: Internet - Internode -
  Internet address is x.x.x.x/24
  MTU 1500 bytes, BW 56 Kbit/sec, DLY 20000 usec,
     reliability 255/255, txload 255/255, rxload 255/255
  Encapsulation PPP, LCP Closed, loopback not set
  Keepalive set (10 sec)
  DTR is pulsed for 1 seconds on reset
  Interface is bound to Vi2
  Last input never, output never, output hang never
  Last clearing of "show interface" counters 3d02h
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 1382000 bits/sec, 152 packets/sec
  5 minute output rate 2309042000 bits/sec, 74 packets/sec
     4640078 packets input, 46025807702 bytes
     4174133 packets output, 76966587324883 bytes
So far  i haven't  been able to figure out the issue, i did  shared the issue with my provider  as per them  there is nothing  unusual in our usage. Looking after  my issue  it look like bug i tried  identical c897-VA-K9 router  have same issue but yet unable to find bug info for the series  of router in cisco.
Appreciate  your prompt help and suggestion.
Regards
khagen
really appreciate if you can share any re

Node Bandwidth is 8 Mbps.
 virtual-Access2 interface, it gives exact traffic information. that made me feel  there is something wrong with  dialer 0 interface.
but want  to know what  is  causing such unusual outbound throughput in dialer interface. is it bug on the router  hardware  or software?

Similar Messages

  • La nouvelle version de Plan est lamentable ! les infos de traffic sont incomplètes et fausse, y a t il une application maps google téléchargeable sans passer manuellement par le navigateur

    La nouvelle version de Plan est lamentable ! les infos de traffic sont incomplètes et fausse, y a t il une application maps google téléchargeable sans passer manuellement par le navigateur chrome ou safari ?

    La nouvelle version de Plan est lamentable ! les infos de traffic sont incomplètes et fausse, y a t il une application maps google téléchargeable sans passer manuellement par le navigateur chrome ou safari ?

  • WiSM version 6 Cannot modifiy service interface

    Can any body help me with this
    although cisco sw advisor said that the best IOS for my hardware 6509 Sup720 IOS: (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF16 suits the WiSM; And I tested it already with WiSM version 5.0 but when I've upgraded the WiSM to version 6.0 the service interface from the switch side says:
    B5_Noc2_CS1(config)#int gig 4/9
    % This interface cannot be modified
    can anyone solve this issue; as the customer refuse to upgrade the switch IOS & He wants to use the latest ED WiSM sw 6.0; so please Help !!!!!

    This is normal, you cannot modify those ports "i guess the Wism is on slot 4" try to change it to slot 3 and you will be able to configure 4/ interfaces...i once got somthing like this.
    the solution is to follow this guide.
    http://www.cisco.com/en/US/products/hw/modules/ps2706/products_tech_note09186a00808330a9.shtml#config

  • I have updated my iTunes to the newest version, 10-25 on a windows XP system. Now my java virtual machine is not working and I need it to run applet window. My Java is also newest version. What can I do to fix/repair my issue?

    I need help with java on windowsXP after updating iTunes to the latest version. My java will not work and I get error message need java virtual machine to run applet window. Did not have this problem prior to the iTunes update.
    Please help, Thanks

    If your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • I have been using Firefox for many years now and really like it, now the version 4 is extremely slow, anyone else having the same issue?

    I upgraded to version 4 last week and find it extremely slow compared to the previous version - like so slow that some pages do not even load. I have downloaded and gone back to version 3.6.17 and everything is back to the normal I have known for years with Firefox and it is really fast again...so now I know that there is nothing wrong with my computer and that the supposedly very very fast version 4 is much much slower than the previous version 3.6...so what gives? I'm not keen on going back to the new improved version 4, though I know it will not be supported soon...anyone else having the same issue?

    Having the exact same problem here.
    -Mac OSX
    -3.6 worked great
    -I tried the 4 beta, got rid of it because it was so slow
    -When it upgraded to 4 is VERY slow and freezes often
    -Appears especially slow on sites with flash (ie http://www.bbc.co.uk/news)

  • My macbook pro i7 (2011 version) has a loud fan and high cpu % when I have Skype on or when I am on Safari. Help please!

    My macbook pro i7 (2011 version) has a loud fan and a high cpu % when I have Skype on or when I am on Safari. My laptop would sometimes freeze for a while and it is usually hot. Has anyone else encounter this problem and know how to fix it? Thanks!

    Skype is a very resource intensive activity...it has been reported on here users are seeing cpu temperatures on the order of 80-85 °C, within the limits of the cpu, but still hot to the touch.
    Make sure nothing else is running so you keep the thermal load down.

  • Version mismatch error in SOAP interface

    Hi
    Scenario is SOAP to SOAP.
    Sending request by SOAP UI to receiver webservice.
    Interface was perfectly done & tested successfully.
    Then we have done some changes in Receiver soap channel ...due to some error the changes were reverted
    but now i am getting an error while testing as " version mismatch"
    The provider webservice is working fine as we have tested it without PI.
    The complete discription of error is as follows
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
       <soapenv:Body>
          <soapenv:Fault>
             <faultcode>soapenv:Server.generalException</faultcode>
             <faultstring>senderChannel '54cfea9d7e9b3ad2895bbe47a9aaa877': Catching exception calling messaging system; nested exception is:
         com.sap.engine.interfaces.messaging.api.exception.MessagingException: Version Mismatch</faultstring>
             <detail>
                <ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">usa42113</ns1:hostname>
             </detail>
          </soapenv:Fault>
       </soapenv:Body>
    </soapenv:Envelope>
    Please suggest the reason for this error & the possible solution
    Regards
    Abhijit

    Hi prateek
    yes, we are using Axis Framework.
    Earlier the interface was working fine with same configuration...But now its giving error as " Version mismatch"
    Regards
    Abhijit

  • Refreshing a webpage in Safari will sometimes load an older version of that same page. Anyone expieriencing this same issue?

    I will sometimes refresh a webpage in safari and it presumably loads that page's cached version because the content is days old. Anyone else expieriencing this? I have an iPad 2, iOS5.01.

    If you go to Settings >Safari then clear it all,that should help. Also if that does not work try resetting your iPad by holding down the home button and the sleep wake button till the Apple logo appears then let it wake up.

  • The new version of Itunes is NOT interfacing correctly with my Airport Express device and I get an error message when I put my macbook in sleep mode.  Anyone else dealing with this?

    When I put my mac in sleep mode I get an error message and I have to click on it and then select whethere to play on computer or airport express.  This was not true with the old Itunes but with this new version it is true.  Any help?

    well nobody bothered to give me a hint on what to do, maybe because the problems with the new version of iTunes are really a lot, there is an enormous amount of people out there that have all sort of different problems including mine  so I have decided to return to the previous version which works fine and wait untill the apple people come up with a decent product ....

  • Documaker 12.2 version MRL_XER output are having Static Overlap/Table border alignment issue

    I have created an MRL in Documaker 12.2 version. I have 2 queries, which is mentioned below,
    1) I have created dew forms which are having Tables used. When I try to generate PDF from Dashboard, we could get the PDF properly. But, when we get the output as  .XER and then we print XER as PDF, the tables are not printing in the PDF properly, where some of the table borders are missing.
    2) When we convert XER output as PDF, in PDF, some static content are getting overlapped. We have checked the font and which are correct. Not all static content are having problem.
    Please help/provide your suggestions to resolve these issues. Thank you!!

    Thanks for the response. We use send to flex script to convert xer to pdf. It uses some utilities to perform the same. We use the same script to convert the xer outputs of all other 11.4 MRLs to PDF. But we face issue only in this new 12.2 MRL output. So we feel that the problem is with the Xer that is generated out of 12 versions.

  • I have an imac  version osx 10.6.8 with time machine and trash issues.

    Husband dragged backups from time machine into trash - God knows why!  I had to restore the computer- brought it to the apple store yesterday.  There is 1 back up in time machine and computer files are fine.  This am time machine can't back up- says it needs more space.  Also all those timemachine backups are in the trash.  How can I delete them?  Tina

    just installed the latest Flash Player
    Did you uninstall all the previous versions of Adobe Flash Player?  Did you repair permissions and restarted your computer after the installation?
    Which browser & version are you using?  Have you tried other browsers? 
    Please advise.

  • Version number of firefox is too high

    Hello,
    Sorry to touch this topic, but I do have plug-ins, that simply cannot catch up with the speed of firefox versions.
    Are there plans to sort of "fake" the version number ot plug-ins?
    kind regards

    Yup. Go [https://addons.mozilla.org/en-US/firefox/addon/checkcompatibility/?src=ss here]. Beware that some won't/may not work.

  • Mac 10.3.9 won't run firefox 3.6. is there an earlier version it will run that is higher than 2.2?

    i have an ibook G4. it is running firefox 2.0.0.20 and won't support 3.6. my system is running really slow and i'm pretty sure i can't upgrade my software due to the age of my mac.
    is there a version of firefox between 2.0.0.20 and 3.6 that i can use? just to speed up the system and make my javascript work again? it is all bonkers

    The last version that runs on OS X 10.3.9 is Firefox 2.0.0.20
    Firefox 3 upwards require OS X 10.4, and Firefox 4 will require OS X 10.5 and an Intel Mac.

  • How do I upgrade from OSX version 10.2.8 to anything higher?

    Can anyone help me :-S
    I have OSX 10.2.8 and need to upgrade to something higher so I can install newer versions of, well basically everything!
    I am really stuck!
    Thanks!!!

    Hi spoonallen! And Welcome to Discussions!
    Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
    The point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.5 (Pending), can be downloaded for free.
    A Full Retail Version(Link), of the Panther Install CDs(Link), can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, etc.
    They are no longer available directly from the "Apple Store", as "Tiger 10.4.x" is the most up to date OS.
    Here are links to some on eBay, that look legit, but CAVEAT EMPTOR!
    Link: USED Plus iLife!
    Link:PROBABLY USED
    Link: USED
    Link: USED
    If you do an expanded search on eBay, or Amazon, you will probably find more.
    Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
    Panther is only on CDs, not DVDs.
    More info here Tip: Using OS X Install CDs/DVDs On Multiple Macs(Link).
    Once 10.3.x is installed, you can use the 10.3.9 Combo Update(Link), to upgrade to the final edition of Panther.
    If your Mac meets the Tiger system requirements(Link), you could also consider installing that, using a FULL RETAIL VERSION(Link) of the TIGER INSTALL DVD(Link).
    Shop Carefully, Examine All Documention, And Good Luck!
    ali b

  • HT4623 How can update my ipod version 4.2.1 to something higher than 4.3.5?

    There are lots of games that require a newer version, but when sync games, etc. the version that is downloaded on itunes is 11.0. my iso is 4.2.1. I'm at a loss!!!

    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Maybe you are looking for

  • How do I back up Apeture photos to iCloud?

    Hi Appreciate any ideas folks may have on this one.  I've signed up for iCloud and photostream is working nicely.  I was hoping that I could use iCloud as a backup application for my Mac.  Most precious item is photos and videos.  I've tried both Car

  • How can I remove the signature?

    I love the signature feature on the App but after I put a signature on the document I cannot get it off.  Is there a way to do that, if so how?  Thank you

  • Want to select photos from digital camera to upload

    Hi, I like keeping a number of pictures on my camera instead of erasing them everytime I transfer them on to my computer. As a result, it takes forever for iPhoto to go through the 700 pictures on my camera to pick up the 2 new ones that I want to pu

  • Delete pages header and footer

    icloud pages...how do I delete header and footer

  • SAPNWRFC on Windows XP

    Hello, Could someone have the sapnwrfc working fine on Windows XP or tell me how to configure it with VC++? I am new in programming with this so i don't really understand how to deal with ... Reagrds. Landryx ...