CA-42 SOLVED USB CAble Problem !

Here is the answer to many CA-42 Cable problems people are having.
First, Nokia says you must use their cable. NOT! The problem with the Chinese cables I found is the pins are not even. With a file, file down the pins so they are all the same length. With 1 or 2 pins longer than the others, the remaining pins do not make contact. Do not file down the longer ones any farther than the short ones. It will work !
It works. I have been trying to get this resolved for 3 days. Filed the pins so

Try uninstalling PC Suite, and also the Nokia Connectivity Cable drivers from Control Panel (Add/Remove Programs).
Then download and install the latest version of PC Suite with the latest cable drivers from:
http://www.nokia.com/pcsuite

Similar Messages

USB Cable problem with HP Photosmart 7960 printer

This may sound like a stupid question but I just bought a new 7960 printer to replace my old 7960 which has two out of the three ink cartridge holders broken and the usb port on the new printer won't accept a usb cable. It appears to be blocked by a cap insert over the connector prongs which will not come out. Any suggestions?

Here is a link with some troubleshooting steps that may help to solve the issue you are having with your printer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02065582&cc=us&dlc=en&lc=en&product=3940574&tmp...
Paper feed problems are a hardware issue, if none of these steps help I would recommend contacting HP for upgrade options. I have included a link with directions for contacting HP:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
I am an HP employee.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Nokia N70! USB cable problem.

Hi everyone! I am having this real problem with connecting my phone to the pc. When i first brought the phone i had no problems in connecting it, but after few months my OS refused to recognize my phone =(! I have reinstalled the software many times, took the latest version of Pc Suite from the internet also but still no use =(! It says that the device has malfunctioned and is not recognized! I have formatted my phone aswell and reinstalled the software but still no use! =(! I am using CA-53 USB cable! Please help me! i need to remind you people again that it used to work in the beginning but suddenly stopped! Please help!!!!

Do not forgot to do this every time you install reinstall pc suite! Now i have one more problem! I cant reinstal simbian software via Nokia Software Updater coz drivers arent working
I starting to hate nokia ( really! )
CAN NOKIA FIX THIS PLEASE???? or they will loose customers!
Btw, i glad i helped you

Apple Dock Connector to USB Cable PROBLEM

I had my iPhone plugged into my Mac book at the coffee shop this weekend using the dock connector to USB cable. After a while, I kept getting a message on my phone that said "This accessory is not compatible with your device. Would you like to turn on Airplane mode?"
I thought this was odd since the connector was an Apple product; I've never seen this message before, and I've had my iPhone plugged into my laptop several times before.
I didn't think anything of it, so I kept selecting 'No' after getting this message repeatedly. I had no reason to question the integrity of my iPhone or its accessories since I don't misuse or mistreat anything ever.
After a while, I looked down and noticed white smoke coming out of where the cable connects to the phone! I immediately unplugged everything and noticed the burnt and melted section of the connector part and in the phone itself. I left my phone unplugged until I could get to the Apple store.
I have to say, I believe these cables are not made very well. Luckily, the Apple store replaced my phone and my cable for free without any hassle. I'm just wondering if this has happened to anyone else? Is Apple doing anything about this?
-Still an iPhone fan.

Starrlet wrote:
I have to say, I believe these cables are not made very well. Luckily, the Apple store replaced my phone and my cable for free without any hassle. I'm just wondering if this has happened to anyone else? Is Apple doing anything about this?
Doing anything about what ? Other people's faulty computers which go over voltage and fry iPhones ?
The initial message you got is indicative of a short circuited or dirty dock connector so it was probably dirt on the connector or iPhone which caused the problem. No they aren't likely to. I've never heard of this before but I am glad they replaced your iPhone so swiftly !

4-pin and 6-pin USB cable- problems

Hi guys,
my original 6-pin Apple USB cable has often been used and thats what it looked like. So I bought a non-Apple USB cable. I noticed, that it has only 4-pins and it doesnt work with my 3G. The strange thing is, that it works great/as good as the Apple one on his 3G. I know that you`ll probably sugest buying a real Apple one, but they were to expensive for me.
Regards

Here checkout these Thunderbolt to Firewire adapters.
http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables
and these...
thunderbolt to firewire

MP3 Mega player 515- USB cable problem

Hi,
I have lost my USB cable for the Mega Player 515 model and I am looking for a replacement. However, I don't know which cable to choose. There are several options out there in the market and I couldn't find any description in the product info page. I am planning to buy the "USB A to Mini-B 5 pin Cable" , please tell me if this is the correct one???? Any specific brand is recommended ?
Your answer is appreciated in advance !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

That's right. You need a USB A-male to B-mini-Male. Not sure about what brand. Any should do.

USB Cable Problem

Hi,
I am using N72 when i connect my cable with my PC a pop up opens in task bar and it shows one of the USB Port has been malfuctioned .But when i connect it to the first three or four times when i ve bought the mobile there was no error.I called my PC service men and asked him ,he was having a pen drive and when he connect it to my PC ,there was no error and i can view the datas in it.Even no symbol occurs in my mobile that cable is connected but when i use my hear piece to my mobile to hear songs it shows ear piece is connected.what to do any updation in Nokia PC Suite software or to change the data cable?

26-Oct-200705:53 AM
mohan_raj wrote:
Hi,
I am using N72 when i connect my cable with my PC a pop up opens in task bar and it shows one of the USB Port has been malfuctioned .But when i connect it to the first three or four times when i ve bought the mobile there was no error.I called my PC service men and asked him ,he was having a pen drive and when he connect it to my PC ,there was no error and i can view the datas in it.Even no symbol occurs in my mobile that cable is connected but when i use my hear piece to my mobile to hear songs it shows ear piece is connected.what to do any updation in Nokia PC Suite software or to change the data cable?
Yes... i have encountered the same usb data cable connnectivity problem with my current N73ME and my old N70. At first it detects pretty fine but after a couple of months its hard to get any symbols either in phone or in PC Suite. I think this is a very common problem for every POP-Port data connectivity. Whether in my new N95 and 5200 has mini usb which is pretty less error in this regards. Why nokia uses such rubbish connectivity solution for such a robust multimedia phone like N-series whereas all the other company uses miniusb which is much much less problem. Nokia plz think on that...

The usb cable probelems on n95 8gb

as stated above, i'm facing usb cable problems on n95 8gb...whenever i finish adding a few songs and feel like wanting to add more...it shows " The operation could not be completed" and i need to either reopen the folder or sometimes cant and i'm forced to disconnect the usb cable n connect it again in order to put songs or view the n95 8gb folder. I can't stand this anymore since it happens since i started to put songs into my phone till now. It's annoying. So can anyone tell me what's problem and how to solve it?

instead of selecting all the songs at a time select say 5 songs and try to copy.
If my post has helped you please click the white star on the right

Lumia 620 usb disconnection problem

Hi. Am facing a problem of usb disconnection while transferring data from my laptop. It's good for 1 or 2 minutes, after that am getting device not available on my laptop.
Also I noticed the charging symbol on battery is blinking when connected to usb, but ok when connected to power cord. Is that blinking normal?
clarify please

The blinking is not normal. I haven't run across any bad USB cable problems on Nokia phones but there have been some HTC USB cables that work to charge but not fot the PC connection. If you have another similar USB cable try it. Try other PC usb ports also

I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Alguine can help solve the problem. thanks

I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Can anyone help me solve the problem. thanks

Its trying to tell you to connect it by usb to a computer to reflash a failed firmware flash
You should comply

TS1538 New Lightning-USB cable solved problem

Got this problem with provided Lightning-USB cable. Occured on 2 different laptops running Windows 7.
Received a new cable from iStore which reliably worked on the same configurations.
Old cable sometimes worked when removing both ends and plugging in again.
Or when using the described trick of taking a new picture and removing the cable.
Old cable seems to work reliably on an older PC running Windows XP.
Not very convenient, so i am glad that the new cable works reliably.

Contact Apple > Contacting Apple for support and service
I think it comes with a one year warranty.

Random Problems with Zen Micro? Try a diff. USB cable

I know people have mentioned this in other posts, but I thought I would reiterate it here. Many people seem to be complaining that their player is not recognized, or only sometimes recognized, or recognized by Windows (as a USB device) but not by their Creative software, or songs won't transfer, etc. Well, I had some similar problems which ALL went away when I started using a different USB cable - the one that shipped with the Micro just doesn't seem to work consistently.
So, if you are having problems with your player that you can't seem to solve any other way, you may want to try a different USB cable. It worked for me.
Hope this helps - I am (now) loving my new Micro!

I tried a different USB cable also, I thought that it would help, but I still got the same problems. I can almost guarantee that although you think you may have solved your issues, they WILL come back.
I've also been experiencing the "Player Not Connected" problem with my Zen Micro.
I've also had the problem where the Zen Micro just freezes in the "Docked" screen even after it has been disconnected from the PC
I've noticed that these are common problems with Zen Micros with the new firmware (.0.03)
My old Zen Micro with the old, original firmware did NOT have this connectivity problem
Creative should investigate these issues associated with this new firmware, or maybe even making the old firmware available for download to see if this really is the source of all these problems.

[SOLVED]If I see "Maybe the USB cable is bad?" one more time...

Hey guys, having trouble with all USB devices on my computer. Doesn't matter where it's plugged in, even on a USB 3.0 expansion card, and doesn't seem to matter what device it is either, I'm struggling with this:
[ 268.656687] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 272.626205] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 276.598295] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 280.565223] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 280.791874] usb 8-7: new high-speed USB device number 13 using ehci_hcd
[ 280.868601] hub 8-0:1.0: unable to enumerate USB device on port 7
[ 284.968029] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 288.937553] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 292.907066] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 296.876583] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 299.715911] device eth0 entered promiscuous mode
[ 308.558490] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 312.528011] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 316.497519] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 320.467042] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 320.783672] usb 8-7: new high-speed USB device number 22 using ehci_hcd
[ 320.863708] hub 8-0:1.0: unable to enumerate USB device on port 7
[ 324.963154] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 328.932674] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 332.902188] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 336.871716] hub 8-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
[ 351.053314] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 355.022842] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 358.992346] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 362.961869] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 374.003868] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 374.018495] usb 1-2: device descriptor read/8, error -71
[ 374.135238] usb 1-2: device descriptor read/8, error -71
[ 374.290509] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 374.517127] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[ 379.053245] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 383.022766] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 386.992283] hub 8-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
That's me unplugging and replugging a device in different places. Note that the message appears multiple times each time I plug it in.
But this isn't just that one device (a galaxy tab if you're wondering). This happens with so many devices I'm going up the wall. It even happens with USB Flash drives! "I'LL JUST USE A DIFFERENT CABLE OH WAIT COMPUTER YOU'RE AN IDIOT."
Sorry, just so frustrated. I've tried the classic capacitor flush (turn off, hold power button in with power calbe unplugged) and it's been doing this for a while, so updates haven't solved it. Different types of devices too, not just storage. Even a keyboard did it one time. You guys got any ideas at all?
EDIT: Before that inevitable post comes, yes, I've plugged it directly into the ports that are attached to the back of the motherboard, please don't ask, please, please, please. I know someone won't read this whole post and will ask anyway but a guy can try.
EDIT EDIT: I forgot to actually say that usb devices do not work when this message appears.
Last edited by MisterAnderson (2013-03-17 04:56:42)

If the errors are consistent across OS (ie LiveCD, Windows?) then your motherboard is most likely on it's way out and needs replacing
You could try removing the motherboard cell battery and doing the "classic capacitor flush" again. Leaving the battery out for a period of time generally has the same effect and in "classic" IT style fixes numerous woes... have you tried a different cable?
If, after replacing the battery, the problem has disappeared I would still treat the hardware as suspect and have it replaced as soon as possible. These sorts of brain farts typically reappear sooner rather than later

I have a big problem! My ipod touch is stuck! it won't open, all I see when I open it is the itunes icon with a USB cable and an arrow! What can I do? I've tried connectingit with itunes, but itunes doesn't see it. plus i have windows 8

Can't connect my ipod toch to itunes!!! It doesn't see it! I use windows 8, don't know if that's the problem. Anyways, my ipod is stuck! Every time I open it, it stays stuck with the image of a USB cable with an arrow pointing towards an itunes icon. but whatever I do, my computer doesn't see it, and neither does itunes. What to do???!!!

The the remaining items of the following, you may have to let the battery fully drain.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How can I tether my Blackberry over USB cable (to sync info)? [SOLVED]

Firstly, I have to thank all of you for making this such a great community and excellent guide to getting almost anything working on Linux - this is what makes Archlinux the best distro IMHO. I have hardly ever needed to post anything here because the answers are almost always either in the wiki or the forums.
Lately though, I received a Blackberry 8310 and wanted to tether it to use its data plan here in Ecuador. After following http://wiki.archlinux.org/index.php/Blu … GPRS_Howto using a small USB bluetooth adaptor, this has worked well and the connection stays up nicely, though very slow (to be expected). Blueman is a great program! Looking at improving my connection speeds (and reducing my latency), I am now trying to get the phone tethered via a USB cable to the phone, rather than over-the-air (Bluetooth).
The problem I am having is that I cannot establish which device exactly is the USB port connecting to? Before this phone, this worked fine on my Nokia E51 setting the modem to be /dev/ACM0. On Nokia, I would connect the phone, select PCSuite mode and 'sudo wvdial movistar' or my /etc/ppp/peers/movistar script would work fine. Blackberry however is a whole different kind of animal. I connect it with a standard USB cable, select 'no' to mass-storage-mode on the phone, and can see it in lsusb fine but the only device I seem to be able to use is /dev/tty2 but modem not initialising.
How can I be certain which device I am using? Will post some lsusb and dmesg.log out put when I get home to give you more info.
thanks for any guidance you can give me,
Last edited by minimal (2010-11-16 16:18:48)

Well, haven't got much further here unfortunately, though I have more logs and debug information now:
First, I connect the blackberry to the USB port and run 'lsusb':
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0fca:0004 Research In Motion, Ltd.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
so I have my blackberry device listed by the looks of things..
I then run (for more info):
peter ~ $ lsusb -v -d 0fca:0004
Bus 002 Device 002: ID 0fca:0004 Research In Motion, Ltd.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 16
idVendor 0x0fca Research In Motion, Ltd.
idProduct 0x0004
bcdDevice 1.07
iManufacturer 1 Research In Motion
iProduct 5 RIM Composite Device
iSerial 3 8F606BB12465F80D8C6F4F3CA17D9CC896C5F475
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 97
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 8
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 1
bInterfaceProtocol 255
iInterface 2 BlackBerry
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 4 RIM Mass Storage Device
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x89 EP 9 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0a EP 10 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
/etc/wvdial.conf :
[Dialer defaults]
Modem = /dev/modem
Baud = 115200
Init1 = ATZ
Init2 = ATE0
;Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
[Dialer movistar]
Modem = /dev/tty2
Init3 = AT+cgdcont=1,"IP","wap.movistar.com.ec"
Phone = *99***1#
Stupid Mode = 1
Username = movistar
Password = movistar
..and the contents of the /etc/ppp/peers/movistar file:
show-password
noauth
#/dev/ttyACM1
# Peter: believe this is the Backberry 8310 device after running 'lsusb':
/dev/rfcomm0
debug
##115200
460800
connect /etc/ppp/peers/movistar-connect
disconnect /etc/ppp/peers/movistar-disconnect
defaultroute
#replacedefaultroute
noipdefault
# Peter: uncommented the following line to debug:
nodetach
usepeerdns
crtscts
local
ipcp-accept-local
#lcp-echo-interval 0
maxfail 10
lcp-echo-failure 0
lcp-echo-interval 0
#lcp-max-configure 0
#lcp-max-failure 10000
#lcp-max-terminate 0
#lcp-restart 30000
novj
nobsdcomp
novjccomp
nopcomp
noaccomp
linkname movistar
mtu 1500
mru 1500
user "movistar"
password "1234"
My /etc/ppp/peers/movistar-connect script :
#!/bin/sh
exec chat \
TIMEOUT 5 \
ECHO ON \
ABORT '\nBUSY\r' \
ABORT '\nERROR\r' \
ABORT '\nNO ANSWER\r' \
ABORT '\nNO CARRIER\r' \
ABORT '\nNO DIALTONE\r' \
ABORT '\nRINGING\r\n\r\nRINGING\r' \
'' \rAT \
TIMEOUT 12 \
SAY "Press CTRL-C to close the connection at any stage!" \
SAY "\ndefining PDP context...\n" \
OK ATH \
OK ATE1 \
OK 'AT+CGDCONT=1,"IP","wap.movistar.com.ec","",0,0' \
OK ATD*99# \
TIMEOUT 22 \
SAY "\nwaiting for connect...\n" \
CONNECT "" \
SAY "\nConnected." \
SAY "\nIf the following ppp negotiations fail,\n" \
SAY "try restarting the phone.\n"
my /var/log/dmesg.log :
Jul 29 21:11:11 el-duro kernel: ACPI: EC: GPE storm detected, transactions will use polling mode
Jul 29 21:11:13 el-duro logger: ACPI action undefined: BAT1
Jul 29 21:11:15 el-duro laptop-mode: Laptop mode
Jul 29 21:11:15 el-duro laptop-mode: disabled, not active
Jul 29 21:11:52 el-duro kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2
Jul 29 21:11:52 el-duro kernel: Initializing USB Mass Storage driver...
Jul 29 21:11:52 el-duro kernel: scsi2 : usb-storage 3-1:1.1
Jul 29 21:11:52 el-duro kernel: usbcore: registered new interface driver usb-storage
Jul 29 21:11:52 el-duro kernel: USB Mass Storage support registered.
Jul 29 21:11:53 el-duro kernel: scsi 2:0:0:0: Direct-Access RIM Blackberry SD 0001 PQ: 0 ANSI: 4 CCS
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jul 29 21:12:04 el-duro dnsmasq[2316]: reading /etc/resolv.conf
Jul 29 21:12:04 el-duro dnsmasq[2316]: using nameserver 208.67.222.222#53
Jul 29 21:12:04 el-duro dnsmasq[2316]: ignoring nameserver 127.0.0.1 - local interface
Here are my logs..
=============
/var/log/kernel.log :
Jul 29 21:11:11 el-duro kernel: ACPI: EC: GPE storm detected, transactions will use polling mode
Jul 29 21:11:52 el-duro kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2
Jul 29 21:11:52 el-duro kernel: Initializing USB Mass Storage driver...
Jul 29 21:11:52 el-duro kernel: scsi2 : usb-storage 3-1:1.1
Jul 29 21:11:52 el-duro kernel: usbcore: registered new interface driver usb-storage
Jul 29 21:11:52 el-duro kernel: USB Mass Storage support registered.
Jul 29 21:11:53 el-duro kernel: scsi 2:0:0:0: Direct-Access RIM Blackberry SD 0001 PQ: 0 ANSI: 4 CCS
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
/var/log/messages.log :
Jul 29 21:11:11 el-duro kernel: ACPI: EC: GPE storm detected, transactions will use polling mode
Jul 29 21:11:13 el-duro logger: ACPI action undefined: BAT1
Jul 29 21:11:15 el-duro laptop-mode: Laptop mode
Jul 29 21:11:15 el-duro laptop-mode: disabled, not active
Jul 29 21:11:52 el-duro kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2
Jul 29 21:11:52 el-duro kernel: Initializing USB Mass Storage driver...
Jul 29 21:11:52 el-duro kernel: scsi2 : usb-storage 3-1:1.1
Jul 29 21:11:52 el-duro kernel: usbcore: registered new interface driver usb-storage
Jul 29 21:11:52 el-duro kernel: USB Mass Storage support registered.
Jul 29 21:11:53 el-duro kernel: scsi 2:0:0:0: Direct-Access RIM Blackberry SD 0001 PQ: 0 ANSI: 4 CCS
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jul 29 21:12:04 el-duro dnsmasq[2316]: reading /etc/resolv.conf
Jul 29 21:12:04 el-duro dnsmasq[2316]: using nameserver 208.67.222.222#53
Jul 29 21:12:04 el-duro dnsmasq[2316]: ignoring nameserver 127.0.0.1 - local interface
/var/log/everything.log :
Jul 29 21:11:11 el-duro kernel: ACPI: EC: GPE storm detected, transactions will use polling mode
Jul 29 21:11:13 el-duro logger: ACPI action undefined: BAT1
Jul 29 21:11:15 el-duro laptop-mode: Laptop mode
Jul 29 21:11:15 el-duro laptop-mode: disabled, not active
Jul 29 21:11:52 el-duro kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2
Jul 29 21:11:52 el-duro load-modules.sh: 'usb:v0FCAp0004d0107dc00dsc00dp00icFFisc01ipFF' is not a valid module or alias name
Jul 29 21:11:52 el-duro kernel: Initializing USB Mass Storage driver...
Jul 29 21:11:52 el-duro kernel: scsi2 : usb-storage 3-1:1.1
Jul 29 21:11:52 el-duro kernel: usbcore: registered new interface driver usb-storage
Jul 29 21:11:52 el-duro kernel: USB Mass Storage support registered.
Jul 29 21:11:53 el-duro kernel: scsi 2:0:0:0: Direct-Access RIM Blackberry SD 0001 PQ: 0 ANSI: 4 CCS
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Jul 29 21:11:53 el-duro kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
Jul 29 21:12:04 el-duro dnsmasq[2316]: reading /etc/resolv.conf
Jul 29 21:12:04 el-duro dnsmasq[2316]: using nameserver 208.67.222.222#53
Jul 29 21:12:04 el-duro dnsmasq[2316]: ignoring nameserver 127.0.0.1 - local interface
Maybe the blackberry required 'usb_modeswitch' - though I could not work out how to use this command
Any ideas out there? Is there a simple way for me to probe USB devices in use? As far as I can tell it IS /dev/tty2 but I need to confirm this.
Many thanks,
Last edited by minimal (2010-07-30 14:55:19)

CA-42 SOLVED USB CAble Problem !

Similar Messages

Maybe you are looking for