CA-JVA on the upgrade 46C to ECC 6.0 (with HR module)

Hi experts,
We have now finished the upgarde but ne things make me feel not good:
In SAP Note 316815 - CA-JVA: Upgr. R/3 Enterprise / ECC- data transfer AFVC->AFVU
I think the transfer of those tables has not been worked fine.
And it seems that the implementation of this note does not woks at all. I mean to transfer of the Tables (AFVC to AFVU and VSAFVC_CN to VSAFVU_CN) before the upgrade and transfer them back after the upgrade.
Currently we have now both systems running: The Source system (the production system where the data comes from with release 4.6C) and the pilot system which has been upgraded in release ECC 6.0 (with source system data).
Is there any possibily to recover this step without to repeat the all upgrade (after a DB copy of course)?
Maybe export those tables?
Thanks in advance
HanseAtik

I have to close it.. without answer from anyone...

Similar Messages

Upgrade 46C to ECC 6.0 with CU&UC

hi,
For the CU&UC, do i need first to upgrade to web as 6.20 and the upgrade to ECC 6.0.
If somebody know what to do?
thaks,
Sergio

Hi,
CU&UC as name itself suggest that it is a combine Upgrade & Unicode conversion that menas we need to Upgrade the system from 4.6C to ECC 600 and then do the Unicode conversion.
The broad level steps will be
Upgrade Preparation
Unicode Conversion Preparation
Upgarede execution
Unicode Conversion
Post Upgrade & Unicode Migration activities.
The Manual for Combined Upgrade & Unicode conversion is available on service marketplace, use the same for more details
Hope this will help you, do revert if yoiu need any more details on the same.
Best Regards,
Sachin.

Upgrade 46C to ECC 6 0 - Preparation steps

1. Before the Upgrade is started what are the PRE - Upgrade steps related to security?
for example should any tables be dwn loaded ? etc etc..I will be doing the upgrade in two weeks just wanted to prepare the the docs as well as the system before.
I hope to give a ths forum a complete security upgrade seanario.
Thanks

Hello George,
Please use the following link to know more about the upgrade 46C to ECC6.0
http://www.sap.com/community/showdetail.epx?itemID=10015
Hope it helps.
Cheers,
Satish.

How do you upgrade OS X 10.4.11 tiger to a higher version of operating system such as OS x 10.5.6 as have tried running the upgrade disc on imac 5,1 with intel processor but only get message saying this cannot be installed with no further explanation ?

how do you upgrade OS X 10.4.11 tiger to a higher version of operating system such as OS X 10.5.6 as have tried running the upgrade disc on imac 5,1 with intel processor but only get message saying this cannot be installed with no further explanation ?

Retail Leopard disc looks like this;
(The disc itself has the same logo). If the one you've got is grey it simply won't work.
Given the retail and second hand prices of Leopard (usually some on Amazon MP), you'll probably find it cheaper to go directly to Snow Leopard, although there could be software updates and printer driver problems that could nullify the difference.

Just upgraded to firefox 4 and websites are now taking ages to load, there were no problems when I downloaded the upgrade. Is there a fault with the new version of firefox?

Just upgraded to firefox 4 and websites are now taking ages to load, there were no problems when I downloaded the upgrade. Is there a fault with the new version of firefox?

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

ITS is not working after the Upgrade to SAP ECC 6.0

Hi Folks
ITS is not working as it supposed to be after upgrading to SAP ECC 6.0
When I try to connect thru ITS i m getting HTTP 404 and HTTP 500 Errors
Can some one throw some ideas.
But web AS is running perfectly alright.
Thanks
Jay

Hi Priya,
You need to Implement the following SNOTE's for these changes.
Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
Tax Surcharge Rate
Increase in Conveyance Allowance
Section 80
Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
2139208 - Union Budget Changes – 2015
2138605 - Sec80C: Sukanya Samriddhi Scheme
Upcoming Developments:
PF Admin Charges Revision
Professional Tax for Mizoram & Nagaland states
Average Rate of Tax
Regards,
Venkat Polisetty

Upgrade 46C to ECC 6 0 STEP BY STEP ---Developing

Now the upgrade has reached the "POST Upgrade Steps" which means Its open to the SECURITY ( Authorizations ) to come in.
1. First I have doing the SU25.
Question -->Do I need to run (1) on SU25 .
Answer:NO this is only for IInstallation of PFCG. for upgrading to higher releases only Steps 2 down are needed.
Please correct me if I am wrong or have additional information which you want to share

> The only way they are going to see what changes have been made is from the change logs for the roles. You can look at tables which show differences in the proposal values but they are worthless unless they map 100% to the only changes shown in the roles.
I think this is what GG is looking for, but as you mention there are both system and audit skill pre-requisites.
The auditor needs to know and have confidendence in the before concept if roles are to be upgraded via SU25.
The auditor needs to have knowledge about the release being upgraded to, and which changes would be required (and opportunities made use of to use new features... potentially also redesigning existing roles in new ones...)
And then map the expected changes (that is their job) to the actual ones (the tools which Alex has mentioned).
My recommendation would be to use the "you navigate, I drive" approach before giving the auditor access to do a comparison and get lost on their own, potentially.
That way you know what the auditor is capable of, and the auditor has a better understanding of your upgrade strategy.
For major release upgrades, redesigning role concepts are an opportunity which should not be missed, and I think a reasonable and skilled auditor should understand that.
> A potential alternative would be to set up an RFC connection to the system which your pre-upgrade roles were backed up to and then run a comparison between each role in the backup and the current system.
That could be usefull as well for a snapshot of expected changes between the "real roles" and the upgraded roles in a sandbox, all else (and coding) assumed the same between the release upgrades (which is of course not the case...) It would be helpfull to find transactions for which the coding has officially changed or are now officially the leading transactions for the proposal indicators.
I have not tried that either - but I think it would be usefull information for the functional folks and developers (including role developers).
Cheers,
Julius

Since I downloaded the upgraded software, my charger that came with my phone says "this cable or accessory is not certified and may not work reliably with this iphone" It worked before but now it doesn't...I don't think I should have to buy a new one...

since I upgraded to the new operating system my charger no longer works...
It says"this cable or accessory is not certified and may not work reliably with this iPhone"

Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here.

Faces in Photos showed up blank after the upgrades

Faces in Photos showed up blank after the upgrades (no labeled faces at all) with the suggested faces mostly full of 100's of blank white circles. I used to have about 50 faces labeled with about 2500 photos. Now I have no labeled faces on top of page (completely blank) and only 9 face suggestions on the bottom. Photos also runs very slowly compared to iPhoto. I tried re-installing and re-upgrading and have gotten the same results. I'm using a Mac Pro (2009), OS 10.10.3, 2.66 GHz Quad-Core Intel Xeon, 16 GB 1066 MHz DDR3 ECC, 7 GB storage. Any help will be appreciated and even if I have to delete the Face's database and start all over, where do I find that database or file to delete?

1. Copy and paste is a very good way of moving chunks of text around, however, it's not really good for moving a Library containing many thousands of files. Drag and Drop is rather more reliable.
it comes up with a black circle and a "!" image.
2. The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

HT6065 i need assistance since the upgrade

since the upgrade i am having major issues with messages coming up asking for passwords that i dont know. example: calendaragent wants to use the "local Items" keychain. no matter if i click cancel or try to enter a password it doesnt work. Please help me as this is a huge issue.

http://support.apple.com/kb/TS5362

I own CS 5Premium. Reading the FAQs, it seems I am eligible to upgrade to CS 6 but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month is too much for me -- I don't use this product for work. The $29 offer seems

I own CS 5 Design Premium. Reading the FAQs, it seems I am eligible to upgrade to CS 6 but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month is too much for me -- I don't use this product for work. The $29 offer seems reasonable but $49 is way too much. I don't need the majority of the programs included in CC, but subscribing to just three of them will cost way more. Really not sure what to do here :-(

Thanks Ned. I did find this page, however it isn't an upgrade. I have been purchasing Adobe products for years so that I could just pay the upgrade price for current products. With the current system, I would be paying much more than I would for an upgrade. For example, I have been using my version of CS for at least three years. The upgrade cost me $750 so that comes out to around $21 per month. I guess I have no options as far as upgrading except for paying for the overpriced CC. Oh well, time to start looking for alternatives. It was just so convenient to have the same programs at home that I use at work.

Integration of ECC 6.0 with SRM 5.0 SR2

Hi Guys,
Can any one please provide me with the steps for integrating ECC 6.0 with SRM 5.0 SR2.
Regards,
Max

Hi ,
Can anyone please let me know if any one has any kind of documentation on this.
Regards,
Max

Upgrade from 46C to ECC 6

Hello:
We are planning to begin technical upgrade in SAP, from 46C to ECC 6.0.
I have the next landscape:
-Current SAP (CS): SAP 46C with Oracle 8.1.7 and Solaris 8
-New Server (NS): Without SAP, 40% more of capacity, with Oracle 10.2 and Solaris 10 already installed.
We want to install SAP ECC 6.0 in NS and get the data from CS.
Which is the best and easy way to do this? SAP manuals are quite generic. I have two ideas but I would like your comments:
1st way
1. Homogeneous copy of CS
2. I install ECC 6.0 in NS with the option to import data generated in 1. (is this possible??)
3. Finish installation and aditional configurations. I begin to test.
2nd way
1. Homogeneous copy of CS
2. I install 4.6C in NS with the option to import data generated in step 1. (Not sure if 4.6C will accept Solaris 10 and Oracle 10.2).
3. I suppose I don't need to reconfigure after installation and import.
4. I do necessary tests. At this point I would have 46C on the new versions of Solaris and Oracle.
5. I begin the SAP upgrade to ECC 6.0 in NS
6. .... The remaining processes indicated by SAP
Thanks for your attention.

> -Current SAP (CS): SAP 46C with Oracle 8.1.7 and Solaris 8
> -New Server (NS): Without SAP, 40% more of capacity, with Oracle 10.2 and Solaris 10 already installed.
The database software is usually installed during the run of sapinst/R3setup, not before. You may run into problems if you pre-install Oracle (environment, necessary database options not set etc.)
The easiest way would be do to a system copy.
I would then
- install the latest Oracle instantclient
- install the latest kernel 46D_EX2 kernel
Markus

Short dump in MIGO and VL02N when upgrading from 46C to ECC 6.0

Hello,
We are doing an upgrade from R/3 46C to ECC 6.0 and we face a shortdump in trx MIGO (upon saving the document).
DBIF_RSQL_INVALID_REQUEST
a BKPF_INSERT in program SAPLF005
The same shortdump happens when doing a Goods Issue on the SD side.
Looking at the program, this is not modyfied so I guess it is a standard SAP error.
OSS however, up to know did not respond to my message and there does not seem to be a SAP Note on this issue!
Anyone had this problem before. How did they solve it.
Thanks for any reply,
Aart

Posted in another forum

CA-JVA on the upgrade 46C to ECC 6.0 (with HR module)

Similar Messages

Maybe you are looking for