CA with SAP FICO and Japanese Language

Hello Friends,
I am Kapil studying ( final group ) to become a Chartered Accountant.I want to do SAP FICO Module from SAP Certified Education Center in Delhi,India.I have also done One Year Intensive Advanced Diploma in JAPANESE Language from Delhi University.I have also done JLPT Level 3.
I have following queries :--
1.Which one is the best SAP Education Center in Delhi both in terms of education and placement ?
2.What are the job prospects after completing CA n SAP FICO in Japan ?
I will be thankful to you if you could provide me guidanc eon the above issues ..
THANKS..
Edited by: KAPIL KUMAR singh on Apr 29, 2008 4:39 PM
Edited by: KAPIL KUMAR singh on Apr 29, 2008 4:39 PM

Chartered Accountancy with SAP FI-CO itself is a lethal combination. Looks like you love Japan or there is someone there whom you love. There are quite some companies in Japan that have implemented SAP (you can get into support, upgrade, enhance kinda roles) and there are also new implementations in the pipeline. As far as training goes, go to any SAP Education Partners (Siemens, etc.). Give your full time to demos and practice sessions on SAP when in training - reading books only will not help.
Good luck.

Similar Messages

Starting with SAP FICO

Dear,
Plz guide me on Starting with SAP FICO.
I am engineering graduate & wants to work on SAP FICO.
Completed studying -- Accounting for Non Accountants.
But now i am in a dilemma as for now which topic to start with.
Someone says TFIN20, TFIN22, TFIN50 etc & some says to start with AC205 series Pdf's.
So plz guide me step by step method as to which Pdf book should be started - from starting to end to learn SAP FICO in serial order.
Also do provide me links for the updated pdf's of SAP FICO ECC 6.0.
Thanks in Advance,
Vivek.

So plz guide me step by step method as to which Pdf book should be started - from starting to end to learn SAP FICO in serial order.
until you work on it and solve some real time problems you don't get full knowledge in SAP module. so try to work on SAP system.asking for authorized books/links is against the Rules of SDN forum. search for FI & co (separate certification for both) in GOOGLE, SDN. you will get so many links & documents.
regards
Mahesh

How to configure for GPlus Adapter with SAP Phone and SAP CRM

Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
Govinda

Hi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen

Help with Apache Reverse Proxy configuration with SAP Portal and SAP Webgui

Dear Experts,
I have an issue configuring Apache to work with SAP Portal and ERP webgui. Accessing Portal through Reverse Proxy is working fine. But the problem arises when we try to open an iView ERP webgui transaction page from Portal with the Reverse Proxy. Have anyone implemented similar requirements and could advice on the configuration required on the Apache side? Thank you

hi,
pls check the below links for reference:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24396589-0a01-0010-3c8c-ab2e3acf6fe2
searchsap.techtarget.com/searchSAP/downloads/chapter-december.pdf
1)Learn to implement the reverse proxy filter and portal gateway in SAP Enterprise Portal 6.0 on Web Application Server 6.40.
https:/.../irj/sdn/nw-portalandcollaboration?rid=/webcontent/uuid/006efe7b-1b73-2910-c4ae-f45aa408da5b
.2 )Configuring the Portal for Your Reverse Proxy Filter Solution . ... This document describes the reverse proxy filter mechanism in SAP Enterprise ...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/32ad9b90-0201-0010-3c8a-c900cd685f8f
3)have full reverse proxy functionality. Possibly. filter. requests. Internet ... Reverse proxy (optionally with authentication etc.) ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c066c390-0201-0010-3cba-cd42dfbcc8be
Note:please reward points if solution found helpfull
Regards
Chandrakanth.k

Having issues with created PDFs requiring Japanese language font pack when they should not

Last week, I created 3 forms for someone. They wanted a fourth, so I put that together today, but halfway through making it, my Livecycle crashed and refused to load up again (I have NO idea why...), so I reinstalled it. I went on to finish making the form, but for some reason, even though the language settings is set to English and not viewer's default locale, the form requires a Japanese font pack. My computer is set to Japanese locale, but with the default language set to English, it should bypass this. The oddest thing is that one of the 3 forms that I already created and sent to them (and worked fine!!!), now also asks me for Japanese language font packs. What the heck is going on?
The forms use nothing other than Myriad Pro, which is set to be embedded. My Acrobat opens them all just fine and shows font properties correctly, but my Reader dies and asks for Japanese font packs. Please help, thank you!
http://dl.dropbox.com/u/1910267/injection.pdf
This is a link to one of the 2 forms that is giving me trouble. It's simple, and was already created before my Acrobat reinstall, yet is now asking for Japanese fonts...
Edit: Forms were created using Livecycle Designer ES 2.5. I'm testing with Acrobat X and Reader X.

Thanks for your reply!
Ok, the form I linked, I actually only tested on my own machine, but had the Japanese font error so I assumed it held true for the new one as well. Here is the one I made today that has been tested on 4 computers (list below): http://dl.dropbox.com/u/1910267/treatment_notes.pdf
These are the computers it was tested on:
My own computer (Windows 7, format/location set to English/US, default non-Unicode language Japanese, System Locale Japan) - pops up error in Reader X, but not Acrobat Pro X
These 3 computers are all set to complete English/US and do not have Acrobat:
The recipient's computer (not sure what OS, likely Reader X, no other languages installed) - popped up the error asking for Japanese fonts
My mother's computer (XP, Reader 9, I know it has Chinese installed, but I don't think it has Japanese) - no errors
My brother's computer (Vista, Reader 9, no other languages installed) - popped up the Japanese font error
And just for fun I tried on the HP Touchpad (Reader 10.3), but it just gives that error that it can't display the contents of the pdf. I think the WebOS port of Reader either is horribly incomplete somehow, or otherwise I have no idea.
I noticed the similar threads, but since they are unanswered, I thought I'd try again and see if I could get an answer. I've got my hands in the air at this point...

SBO integration with sap Fico

HI All,
does any have any documents or any process regarding integration of sap business one with SAP FI-Co
Rgds
Micheal

Hi Micheal,
You may search and post your questions there in the SAP Business One Integration Technology forum:
SAP Business One Integration Technology
I do believe the link to the higher package would only focusing on SO-PO level. Not FICO level. There are too much gaps in between.
Thanks,
Gordon

Autorization issue with SAP Query and RPTQTA10

Dear all,
I am having some difficulties with autorisations in SAP Query and Report RPTQTA10.
in IT2006 I have a subtype 03 which should not be accessible for a group of users.
Also I have created a test employee with a sybtype of IT2006 which is allowd and one which is not allowed.
When I run some reports with that user I get a nice result with PT50. Only the allowed subtypes are being displayed.
When I try to run A SAP Query or report PRTQTA10, the employee is not visible and seems to end op in an error list.
Can someone shed some light on this issue?
Kind regards,
Patrick

Hallo,
Follow like this...
Role 1:-
authorization level: R, W (You should not give W, R. You should give either W or M, R, Any way it will not create any problem)
Infotype: 2006 -Ok
Pers area: * -Ok
Emp group: * -Ok
Emp sub group: * -Ok
profile: ALL*, ZBHR_OS etc etc -Ok
Subtype: 01, 02 - Keep only sub type 01, 02
fuction group: * -Ok
Role 2:-
authorization level: R, W (You should not give W, R. You should give either W or M, R, Any way it will not create any problem)
Infotype: 2006 -Ok
Pers area: * -Ok
Emp group: * -Ok
Emp sub group: * -Ok
profile: ALL*, ZBHR_OS etc etc -Ok
Subtype: 03 - Keep only sub type 03
fuction group: * -Ok
Then user who want only sub type 01 & 02 then assign role 1 and he will not have access to sub type 03
User who want only sub type 03 access, then assign role 2 only so that he will not have access to sub type 01 & 01
User who want sub type 01, 02 & 03 access, gibe Role 1 & Role 2
Hope it clarifies.
Regards,
Purnima

Creating a search help with SAP UI5 and js?

Hello com,
I am trying to create a search help, collecting data from a table.
Is there something similar to the typical ABAP search help in SAP UI 5?
ABAP:
PARAMETERS: lv_alias TYPE dsh_alias MATCHCODE OBJECT dashboard_alias_f4,
I found this in the Demo Kit:
// create a simple SearchField
var oSearch = new sap.ui.commons.SearchField("providerSearch", {
        searchProvider: new sap.ui.core.search.OpenSearchProvider({
                suggestType: "json",
                suggestUrl: "/demokit/suggest?q={searchTerms}",
                icon: jQuery.sap.getModulePath("sap.ui.core", '/') + "mimes/logo/txtonly_16x16.ico"
        search: function(oEvent){
                alert("Search triggered: " + oEvent.getParameter("query"));
//attach it to some element in the page
oSearch.placeAt("sample4");
But how can i connect it with the specifiy data table?
Thanks,
Domenik

Hi,
you need to create OData service which will retrieve (search) the required information and then need to create UI5 application to consume it.
you can refer this blog How to Implement Value Help (F4) with SAP UI5 which covers both parts.
if you are having SP08 version of SAP Gateway then creating search help is very simple. refer my blog Creating OData service based on Search Help
Regards,
Chandra

Oracle Standby DB with SAP - BRARCHIVE and BRBACKUP

Hi experts,
I was requested to configure and standby Oracle scenario for with SAP. After reviewing many different documentation regarding this, I would like to confirm the following with youu2026How do the BRARCHIVE and BRBACKUP tools should be integrated in this standby/data guard configuration? Actually data guard configuration has been already completed and redo logs are being shipping and applying successfully from primary db to the standby db. Please note that no settings for BRACRHIVE or BRBACKUP have been done so far.
From doc. u201COracle White Paperu2014Setting up Oracle 11g Data Guard for SAP customersu201D, it says that u201CThere is no change to BRARCHIVE configuration necessary. It can work like with any other standolane databaseu201D. What changes or considerations would be required on the current data guard configuration to implement these BRTOOLS? For exampleu2026If I start using BRARCHIVE to copy the offline redo log files from the production database to the standby database, its necessary to disable anything from the current configuration?
Hope I was clear enoughu2026thanks for your help.
Regards

Hi Orkun,
If the use of BRARCHIVE is not required or at least is not mandatory to configure an standby db for SAP environments...I've started thinking If I've followed the right process to complete this?
As mentioned if my post the following documentation was used "Oracle White Paperu2014Setting up Oracle 11g Data Guard for SAP customers". Did I follwed the right process or is there any different set of steps to configure Oracle standby DB for SAP using BRARCHIVE and BRBACKUP?
As you can see I'm confused about the Standby DB configuration process for SAP environments.
Any clarification you can provide me regarding this would be highly appreciated.
Regards

Any Link with SAP BI and ECC6

Hi..
Is there any Direct Link between SAP BI and ECC6.
Regards
Lakshman

Again very common...
SAP BW (term BI is used for fronted tools) uses SAP API (SAP R/3 Plug-In) technology to connect SAP's sourec systems like ECC (R/3), mySAP components, etc... Check out more about this topic @:
http://sapport.blogspot.com/2008/06/bicont-pibasis-st-pi-pi-r3-plug-in-see.html

SAP GRC AC with SAP IdM and without SAP Idm

Hello,
Could anyone provide me what are the advantages implementing SAP IdM with SAP AC suite?
Can I use SAP GRC User Provisioning tool with SAP HCM position based concept?
Thanks in advance.
-Harry

Hi ,
In GRC 10 there is no concept of web services . GRC 10 uses native SQL query for calling risk analysis which mean no need to configure web service in GRC 10
Thanks & Regards
Asheesh

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

RFC calls with SAP JCO and IBM resource adapter for SAP - basic tuning

Hi experts,
we are working on a java portal connected to a backend system SAP by calling RFCs.
On our first integration tests, it appears to be quite slow fetching data from SAP by calling the remote functions from the custom portal. We are using SAP JCo 3.0.6 and IBM resource adapter for SAP 7.0.0.3 to integrate SAP with our portal.
Is there any basic tuning to achieve to improve performances or any hint of where to tune in SAP ?
Any help would be greatly appreciated.
Thanks a lot,
Jamal

Hi Jamal,
I understand you have already checked performance issues in the SAP Server. We had some problems with certain RFC calls and it turned out to be a badly developed ABAP sentence.
I'd recommend you to use httpwatch or another tool to check the response times from the browser, so you can point accurately where the is.
Regards
Francisco

Localization: Best practice suggestions Apps with mixed UI and Content languages?

I am trying to write a simple Universal app that can be easily localized to different UI languages. But the app also needs to display content that is determined by user settings. For example I would like the app UI to display in the users region (English,
Russian, etc.) while at the same time having fields on the page whose strings are coming from other resources (Latin "la"? , Spanish, etc.).
The samples are pretty good about how to setup resources with respect to the UI ( e.g. Strings/en-us/Resources.resw ) but not what to do if you want to also be able to draw strings from a different language. When the words in the content fields show in Latin
I don't want the UI to also be in Latin.
Suggestions on best way to do this?
Thanks,
-Tom19

Hi Tom19,
I did not receive the email notification on my mailbox for your reply, that's weird. Sorry for the late response.
Basically we have the best practice documentation for you:
Creating and retrieving resources in Windows Store apps also
Quickstart: Using string resources, take a look at the documentations to see if these helps.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Query with F1 Help and the Language settings

Hi Experts
My F1 help shows in Czech language...but I need it to be in English. I changed the language to English, however, the F1 Help still displays in Czech.
Can you help please?
Many thanks
Caroline

Dear Caroline,
Please Follow this Steps
Help>>Documentation>>Help Setting
The Help Settings...
Window will Open
Languge>>
English(United States)
Check the Path C:\Program Files\SAP\SAP Business One\Help\EN
and Open SBO_Help.chm File
Thanks & Regards
Nishikant S Virkhare

CA with SAP FICO and Japanese Language

Similar Messages

Maybe you are looking for