Cable driver fail N95 after upgrade

Hello!
After I upgraded the software I cannot longer connect my phone through cable.
In Device Manager the phone appears as "Wireless communication devices", and the phone as a computer icon with an exclamation mark in it. Removing and reinstalling it gives "Nokia N95 USB Phone Parent" and then "This hardware cannot be installed - An error occurred when installing the driver" (or somnething like that) - "A serious error occurred during installation".
Please advice?

Uninstall all nokia's software from pc, then reinstall again. Try to download nokia's connectivity cable driver from nokia's website.
N8,N97,N96,N86,N95 8GB,N85,5800,N79,N918GB,N82, N81, N93, N80, N73ME, N70, 6680, 6600,5320,5130,7610,7650,,SIE SX1...................

Similar Messages

HT1751 My win8 pc hard drive failed. After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator was used). ITunes does not recognize the back up files - help! (it does show cloud & recently burned m

My win8 pc hard drive failed. After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used). ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help! The backup files consist of 34,000+ songs; almost all burned from my own CD collection. I do have most of the songs on an ipod classic but hesitate to try to restore from that. Can someone tell me how to get these 34,000 songs to show up in iTunes? Thanks!!

This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
tt2

Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

try and Reset the System Management Controller (SMC)

Call failed constantly after upgrade to OS 4.2

Has anyone else suffering the same problem? My iPhone 4 just keeps failing to make a call after upgrading to OS 4.2. The strange thing is that it seems this just happens within vodafone's 2G network. If I turn 3G on, there is no problem with call failed. However, I normally turn 3G off for getting longer battery life. Is it a problem with the phone? or it is the network problem? Has anyone got the idea?

I am having similar problems connecting calls and having calls drop since upgrading to 4.2.1. Been on to Vodafone to sort but they don't seem to be having issues. From searching online, seems to be an issue after the last upgrade. Not sure what to do next. Happens on 2G and 3G for me

Dvd drive not working after upgrade to osx10.9

Since my Macbook upgraded to 10.9 the DVD drive no longer works.
Putting in either a pre-recorded disc or a blank to burn results in the disc being ejected after spinning for a few seconds.
The SD card reader also stopped working but I was able to correct that problem.

Same problem here on a mid-2010 21.5" iMac. Will read CDs and 1 out of 100 DVDs (1 kids' DVD, weird) but generally nothing in DVD format.
I tried all the solves listed (change prefs, reset EMC and both PRAMs, boot from internet disks, even an Endust cleaning CD). Nada. I then set up a Joint Venture call and they diagnosed the drive as faulty after repeating all of the above. They say it's very possible that dying Superdrives can read CDs and even burn disks but not read DVDs. They said it'd be about $150 to replace the drive at a Genius Bar.
Here's where I try to be helpful.
If you're found this thread and you're not under warranty, don't waste ANY time testing it or trying to fix. Certainly don't roll back to previous software versions -- wasting hours of time and eliminating software features you may like or introducing incompatibilities. Just hop on over to Amazon and buy a $30 (not kidding) Amazon Basics external DVD drive. I ordered one w/ my cleaning disk knowing I'd prob need it and prob wouldn't want to pay Apple to fix my 3-year old machine. Works like an absolute charm for me. Faster ripping CDs than the Superdrive, plays DVDs through DVD Player, VLC, or XBMC instantly.
So my advice (ignore it if you like, it's worth what you paid for it) is to ignore any conspiracy theories about whether Apple planned this. IMHO, it doesn't matter for $30. Your time is worth more than $30. Just buy an external and get on with your life. You can even use it with your drive-less Air when you get one, if you don't have one already. How often can you solve a complex computer problem instantly, and be better off in the end, for $30? Just do it. End of advice.
HTH.

Failed install after upgrade

I posted this in the Software Update forum but got no answer there...
Just updated my n73 to v3.0638.0.0.1 - thanks guys! - and am having an odd issue on restarting the phone.
I get an install bar and then a message asking me to complete the installation from Apps Manager.
Looking in Apps manager there is an "uninstalled" App called 20000d45.sis on the memory card. Clicking this and choosing to install then calls up the MobiPocket reader installer, which fails shortly after the bar finishes.
So problem identified. Mobipocket doesn't like the new update. Fair enough.
How do I stop it trying to install after every restart!
There seems to be no way to delete the installer from inside App Manger!
Whilst I have found related files on the Memory Card that I can delete, this seems to not help. The files still show on the phone.
Any tips?

Just connect it to the PC via USB Mode.There ya will see a drive of n73 on yar PC then open the drive and then direct go to Search option here ya will see dat 2000 or something like dat and then just delete it.I bet ya will never face any trouble like dis thing.
It not related wit da update program each time ya Hard reset update software without uninstalling the applications it will happen.So do it carefully.
O yeah at first I was so scared of ds type of problem but now it is very simple thing to me.
Last thing,Connecting N(73,80,91) via USB Mode and tranferring data in the N73 is more safe and less problematic than to do it with the damn PC Suit

Optical drive endlessly cycles after upgrade.

After upgrading to snow leopard, when closing my laptop (not shutdown, but sleep), my optical drive "cycles" (or sounds like it is trying to eject a disc) persistently. It does this about every 1-1.5 minutes.
Any ideas would be greatly appreciated!

Hello Michael Dixon2,
Thanks for using Apple Support Communities.
In order to troubleshoot this issue where the optical drive does not accept discs, please follow the steps below.
Doesn't accept discs
Be sure to check your disc to make sure it is flat. You can check this by putting the disc upside-down on a flat surface. If the disc is bowed up on any side or in the center, do not use the disc because it might get stuck in the drive. Do not use discs that have anything attached to them or dangling from them (such as "sweeper" or cleaning discs).
If the drive struggles when you put in a disc or stops part-way, carefully look at the disc for labels that may be interfering. If there aren't any raised labels then try putting the disc in a few more times.
Try another disc to see if the issue is being caused by a specific disc.
Make sure you insert the disc far enough for the drive mechanism to activate. You need to insert discs nearly all the way before the drive will activate and pull them in. If you don't completely insert a disc, the drive will reverse and push the disc back out.
Allow the drive one or two seconds to accept the disc while it is fully inserted.
Reset the System Management Controller (SMC).
If the drive repeatedly does not accept discs, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Apple Computers: Troubleshooting the slot-loading SuperDrive - Apple Support
Cheers,
Alex H.

Express Card Driver Not found after upgrade to 10.6.7

I upgraded my macbook pro to version 10.6.7 recently and later found out that the express card 34 slot drive was missing and could not access my Sony SxS cards. After some extensive search I found the site where I could retrieve the driver from. It is listed below. Worked for me! It should work for you also.
http://support.sonybiz.ca/esupport/Navigation.do?filetype=Drivers
SxS Device driver Ver. 1.0.52020 forMAc (Oct 2010)

Hi,
I need to configure a copier konica minolta 7145 with IP-432 on Mac OS X 10.6.7.
the copier has never been used before on this computer, can you tell me how to print with the Konica on mac, which drivers to install, what kind of cables and which procedure.
Thanks a lot!

HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
I have tried all the solutions provided on the HP website but none of them worked.
I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
If some genius can help me I will pray for him/her that all his/her wishes come true.
Thanks you in advance.
Imroz Baig

I just got my HP Deskjet F2120 working in Windows 7. Here's how:
Insert the setup disk in your CD/DVD drive. Choose to view the files in Explorer. Scroll down to the file "Setup," which is identified as an application.
Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
ALSO check "Run this program as administrator" at the bottom of the window.
Press "Apply," then "OK."
Now you can double-click the "Setup" file and run the software installer.
It will 100% work inshallah...

Samsung External Drive Not Working After Upgrade to 10.9

Hi,
I upgraded to Mavericks (10.9) on Friday and now my external drive does not show up when I connect it to my Macbook Air (2GHz Intel Core i7, 4 GB 1600 MHz DDR3).
My external drive is a 1 TB Samsung S2 Portable Drive.
I am attaching how it appears in Disk Utility now.
Please please can you help me? I'm nervous that I have lost all my personal data.
Thanks,
Emmett

The drive may have some software on it that is incompatible with Mavericks. Not your files that are on the drive, but something from the manufacturer of the drive.
There may be some software on your mac, also from the drive manufacturer, that is usually used for accessing the drive, and this may be incompatible with Mavericks.
Or your drive may just have taken a very inopportune time to die.
I'd try:
a different USB or firewire cable
It would help to give us more information about your computer. If you can, use EtreCheck Etresoft: EtreCheck to generate a system report and paste it in a response here.
Try a safe boot (restart, hold down shift until you see the Apple logo). Then try to mount the drive. If this works, then you know the problem is with some 3rd party software on your mac, probably some utility from the drive manufacturer. Mac OS X: What is Safe Boot, Safe Mode?
TechTool may be able to repair the drive so that you could mount it. Techtool Pro 7
Look on the drive manufacturer's website for an update to the software.
If you have another computer with Mountain Lion on it, perhaps you can use this computer to copy the files, then erase the drive, and then put the files back, without the incompatible software.
Maybe the drive will mount in target mode on your mac or another mac, and you could transfer the files. How to use and troubleshoot FireWire target disk mode

Network drive appears empty after upgrade

I had my SuperDuper backup on one of two drives in a D-Link NAS. TM backs up to a third drive that isn't on the network - just an external drive here on the desk. I upgraded last week and everything... well everything went to ****, generally, but TM had been working just fine since the upgrade. Today, however, it suddenly went nuts. It was taking forever and sucking up huge resources, even webpages were loading terribly slow. I left it alone for about fifteen minutes, then tried to cancel it... then Finder stops responding. So I try to relaunch Finder, which closes just fine, but I get an error and Finder won't reload. So I reboot, which takes a good 7 minutes.
Okay, now the network problem: after all that, I can view the files on my one network drive - ironically, the one I don't care about - but my network drive with my SuperDuper sparseimage shows up as empty. I checked in terminal and also FTP. Totally blank. Even though TM backs up on a different drive. What's up? Any ideas? I'm leaving the network drive alone until I figure it out... I really need that sparseimage (during this same issue, TM corrupted the external, so I had to reformat it... so now my only backup is [maybe] on this network disk).
Argh. I should have waited a month or two before updating. Let someone else deal with the early adopter bugs.

With Offline Files disabled the contents of the mapped drive are visible and accessible. Unfortunately, Offline Files must be enabled for BranchCache to work.
Looking in the Event Viewer at “Applications and Services Logs\Microsoft\Windows\OfflineFiles\Operational” I can see that the mapped network drive transitioned to slow link during high latency but has never transitioned back.
~JuniorG33k "Why is this thus? What is the reason for this thusness?"

Service manager Configuration Management Cube Library MP failed status after upgrade SCSM 20012 R2

Dear,
After the Upgrade to SCSM 2012 R2, the status of Service manager Configuration Management Cube Library MP is set to Failed and the System library MP is stuck on running in the eventvwr i got the following message:
Deployment Execution Infrastructure has retried the maximum number of times and is giving up on this execution step.
MP Element ID: SystemCenterWorkItemsCube
MP name: ServiceManager.ConfigurationManagement.Cubes.Library
MP version: 7.5.3079.0
Operation: Update
Error message: Errors in the metadata manager. The 'XXXXCustomerList_XXXXCustomerListId;' intermediate granularity attribute ID of the 'IncidentDim_XXXXXCustomerList' measure group dimension does not exist.
I already restarted the deployment of the MP
regards
Geert

Hi !
This looks like the "Primary Key Issue", documented in the MPSync-Fails Section at
http://technet.microsoft.com/en-us/library/jj614520.aspx
1.) Stop, Disable and Disable-Schedule for ALL DW-Jobs
2.) Follow instructions in the link
3.) Run DW-Jobs in correct oder like here
http://blogs.technet.com/b/mihai/archive/2013/07/03/resetting-and-running-the-service-manager-data-warehouse-jobs-separately.aspx
R.

Ethernet cable connection not working after upgrade

Hello fellow Mac users,
I'll keep this short, after the upgrade to Snow Leopard from Leopard (10.5.8), when I try to connect to the internet via my ethernet connection, it doesn't work. It says, when I go to a web browser, "you aren't connected to the internet."
The strange thing is, when I have Airport on, it works just fine.
Any suggestions? I'm out of them.

Night_Light47 wrote:
There isn't a "built-in ethernet" portion on there, there is the "ethernet" part listed, and it's unconnected.
On my Mac OS X 10.5.8 system the Ethernet item is called "Built-in Ethernet", but if I try to create a new one, the choice is "Ethernet". I wouldn't think it would matter much just what it's called.
Understand, if I plug the ethernet cable in, I can not connect to the internet.
I do understand. I'm trying to help you with that problem.
When you select the "Ethernet" item, what's the setting for the "Configure" option?
In the System Preferences Network panel, try using the minus sign at the bottom to delete the "Ethernet" item, then use the plus sign to create a new "Ethernet" item. Set the "Configure" choice to "Using DHCP". Then try connecting your Ethernet cable.

Backup hard drive before or after upgrading?

I'm working on a Mac OSX 10.5.8 Leopard in Adobe CS4 Design Standard and I'm about to upgrade to Mountain Lion 10.8 and Adobe Creative Cloud. The question is when do I backup my hard drive - before, somewhere in the middle or end of upgrading all of the programs?

I would wait until after updgrading the OS to install the desktop applications that come with the Creative Cloud.
Not sure how many backups you want to make but you could back up at each stage.

Dolby Audio driver cannot start after upgrading to Windows 8.1

Hello.
Windows 8 was the worst thing that happened to Windows, but since I bought this G505s laptop with Win8 pre-installed, i had no other choice to go to. Few days after the purchase, Windows 8.1 arrived and I updated 8 to 8.1 hoping to see some improvements. But to my sadness, 8.1 has ruined my expectations, and Lenovo didn't even care to address the user issues in 8.1
Here are my Issues :
OneKey Recovery : Updated to 8.xx.xx.xxxx
The OneKey Recovery app tells that 'Current system cannot create a backup'
I can't have a secure laptop without it creating the Recovery !!
Lenovo, please address this issue and fix the OneKey Recovery Problem !!
Dolby audio app : Doesn't open, and if once it starts, cannot configure the Equalizer !
--- Dr Saketh ---

hi sotim01,
Thanks for posting!
1. Uninstall all components,
Open Device Manager and Uninstall your Conexant audio under Sound and ganing controllers (make sure to place a check under delete driver software for this device)
2. Open Control Panel Uninstall a program and highlight the dolby component and an Uninstall button will appear.
3. Open your C: drive and Delete any folder that says drivers if non then continue with the next step
4. Download this Driver for installation
Conexant Audio Driver
Install it and continue
5. Open Drive C: now and you should have the Drivers folder back.
Open that, Open Connexant Open Dolby Gui, then you should have Dolbyaa for Advanced audio.
Restart your PC and there you go!
Let me know your findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Cable driver fail N95 after upgrade

Similar Messages

Maybe you are looking for