Cable extension for 24" Apple Cinema Display

Hi, Anyone have issues with Dr Botts Extension cable for the 24" Apple Cinema Display? Thanks

It is around two feet long. I would not have a problem with this if I could extend it or Apple had adopted the standard cable with female connector on the display so I could purchase a longer cable. Apple has a long history of slipping into proprietary solutions that are often good (e.g., magsafe on MacBook) but tend to cramp ones ability to come up with solutions they have not thought of.
There are a growing number of m-m cables that would work from various vendors like Belkin, but I have found no extenders from Apple or any other vendor.
As to the monitor itself, I LOVE it. I am sure there will be a solution eventually. I have the new Mac Pro and monitor on the kitchen counter. Not sure how long my wife's patience will last.

Similar Messages

Apple Cinema Display Calibration

Hello,
I have tried googling for this, but I have come up empty.
Is it possible for an Apple Cinema Display to be calibrated to the DICOM 14 standard?
http://medical.nema.org/dicom/2004/04_14PU.PDF
In short is a specific logarithmic grayscale gamma, with other requirements.
Thank you,
Stephen Furlani
Biomedical Software Engineer

I have a 23" iMac and a 24" Cinema Display, both purchased at the same time, and the colors are not the same. I have calibrated both with a Spyder Pro system and with the Apple software but still get very different hues on the some photo showing on both screens.

Will Apple Cinema Displays work with Directv?

Hi everyone, I have a 23" Cinema Display, the model before the aluminum casing. Now what I'm trying to do is watch Directv on the ACD through the hdmi/dvi output of the directv receiver. I understand I will need an ADC to DVI adapter for my model display but I'm already planning on getting one since I will be connecting my macbook pro to the display.
So has anyone tried this out and can say this will work fine? Or will the picture be distorted, colors off, incorrect signal, etc? If it works fine, I will buy a dvi switch so that I can use the display for my computer and television.
I know there is Elgato's EyeTv hybrid out there but this option will only allow me to watch OTA HD and every directv channel in sd. I already have the directv hd package in my house but do not have a tv in my room at the moment.
Thanks a lot.

As far as I know this won't work for at least one reason and possibly two. For one, Apple Cinema displays are very picky about the input that is passed to them. In fact, the 23" ACD will run from one, and only one, format, which is 1920 x 1200 at 60Hz. This is not a standard for consumer devices like satelite TV boxes, so the DirectTV will not be able to output this resolution.
The second reason is that the HDMI output from the DirectTV will likely expect an HDCP handshake from whatever display is attached. ACDs are unable to provide this.
There may be products from Gefen that will allow you to interface the two, but I'm not sure about that.

Leopard, Vista and Apple Cinema Display

I've searched the discussion forum for problem with my Apple Cinema Display, but most of the threads don't seem to fit exactly my question, which is:
*Is there a driver for 23" Apple Cinema Display for Vista?*
I have a brand new MBP (15", just 2 weeks old). I used Boot Camp (v.2, as part of Leopard) to install Vista.
Threads in the discussion forum seem to be more related to 30" display and v.1.4 of Boot Camp.
Thanks in advance.

Thank you Stefan. Well, it fixed the problem, but only partly:
I can get a picture in the 23" Apple Cinema Display, but after re-start (in Vista), it disappears. I need to go to Display Settings in Vista control panel to reset the monitor. The every time I try, it gives me different options (e.g. resolution, main/secondary monitor, refresh rate). Sometimes I can get the picture back, and sometimes I can't.
It's unbelievable that Apple doesn't even support its own hardware in Leopard!

Can I use an Apple Cinema Display as a second monitor for my iMac?

I have a new 24" intel iMac and was wondering if I could use my old 20" Apple Cinema Display (aluminum) as a dual display. What cables do I need?

Just had a good look inside my box and nothing. Maybe it's a Apple UK thing
The back of my iMac does have a Mini DVI port so I'm gonna pop down the Apple store tomorrow morning to pick one up.
Thanks for the advice, I'll let you know if I'm successful.
Message was edited by: genpro

I need a power adaptor for my 1st gen Apple Cinema Display

I just moved, and I lost the power cable to my first generation Apple Cinema Display (20" I think). It looked like the old powerbook cable, kind of a blue wheel thing-a-ma-bob. Any ideas? It seems as if Apple only sells the accessories for products they are now selling this week.

This is the usual solution for an ADC display that does not have an AC power cord to be used with a Mac that has only a DVI output. This device adds up to 4 Amps of power at about 25 Volts to power the display:
eBay listing of Apple DVI to ADC Adapter with Photo
There are also some cruder versions that use the external Power supply brick "borrowed" from a G4 Cube.

Hello everyone, hoping for some help with my new Apple Cinema Display 20"

Hi everyone, I bought an Apple Cinema Display 20 inch LCD monitor, just about 3 weeks ago. I have two issues I am hoping to get some help with.
1) I am using the screen on a PC with Windows XP, and I was very disappointed at the lack of PC support. I have no on screen display (OSD), so I can't see what percentage I have my brightness set to, and I can't alter the colour or contrast of the display, etc. Luckily it defaulted to very good settings, but I would really like to be able to use the (fan made?) program called "WinACD". If I would be best asking somewhere else, please direct me there. If not, my problem is that I installed it added the "Controls" tab, but it just says, Virtual Control Panel "None Present". I have tried googling for an answer, and I have seen many suggestions, but none of them worked. I installed the WinACD driver without my USB lead plugged in, and someone said that was important. So I have tried uninstalling, rebooting, then reinstalling it again with the USB plugged in, and a device plugged in to my monitor to be sure. It didn't seem to help. I have actually done this process a few times, just to be sure. So I would really like to get that working if possible.
2) I am disappointed at the uniformity of the colour on the display. I have seen other people mention this (again, after a google search), and that someone seemed to think it is just an issue we have to deal with, with this generation of LCD monitors. Before I bought this screen, I had an NEC (20wgx2), and it had a very similar issue. Most of the time, you cannot see any problem at all, but if you display an entire screen with a dark (none prime) colour, like a dark blue green colour, you can see areas where it is slightly darker than others. It was more defined on the NEC screen, and that is why I returned it. I now bought this Apple Cinema Display, because it was the only good alternative to the NEC. (It has an 8bit S-IPS / AS-IPS panel, which was important to me). But the problem exists in this screen too. It isn't as bad thankfully, but it still exists... I have actually tried a third monitor just to be sure, and the problem existed very slightly in that one, so I think I am probably quite sensitive in that I can detect it.
It is most noticable to me, because I do everything on this PC. I work, I watch films, and I play games. 99% of the time, I cannot see this problem. But in some games (especially one)... the problem is quite noticeable. When you pan the view around, my eyes are drawn to the slight areas on my screen which are darker, and it ruins my enjoyment. To confirm it wasn't just the game, like I said, I can use a program to make the entire screen display one solid colour, and if you pick the right type of colour (anything that isn't a bright primary colour), I can see the problem - albeit fairly faintly.
I am pretty positive that it is not my graphics card or any other component of my PC, by the way, because everything is brand new and working perfectly, and the graphics card specifically, I have upgraded and yet the problem remains - even on the new card. Also, the areas that are darker, are different on this screen than on the other screens I have used.
So basically, I would like to register my disappointment at the lack of perfect uniformity on a screen which cost me £400 (over double what most 20 inch LCD screens cost), and I would like to know if anybody could possibly suggest a way to fix it?
It is upsetting, becuase although this problem exists on other screens too, this is, as far as I know, the most expensive 20" LCD monitor available today, and uses the best technology available too.
p.s. If anyone would like to use the program that lets you set your entire PC screen a specific colour, it is called "Dead Pixel Buddy", and it is a free piece of software, made by somebody to check for dead pixels. But I found it useful for other things too, including looking at how uniform the colour of the screen is. That's not to say I was specifically looking for this problem by the way... the problem cought my eye.
Thanks in advance!
Message was edited by: telelove

I've been talking about this on another forum too, and I made some pictures in photoshop to describe the problem. Here is what I posted on the other forum:
Yes, "brightness uniformity" definitely seems to be the best description of my issue.
Basically it just seems like there are very faint lines down the screen, that are slightly darker than the other areas on the screen. They aren't defined lines, and they aren't in a pattern. It's just slight areas that are darker, and the areas seem like narrow bands/lines. Usually you can't see it, but in some cases, it is quite noticeable. It is mainly when I'm playing a game. The slightly darker areas are not visible, and then when the image moves (because I am turning in a car, or turning a plane, or turning in a shooter etc.) the image moves, but these slightly darker areas stay still, and that makes them really stand out.
As for how it looks, I tried to make an example in photoshop:
Original Image:
http://img340.imageshack.us/img340/3045/td1ja9.jpg
Then imagine turning the car around a bend, and then it looks like this:
http://img266.imageshack.us/img266/959/td2hq7.jpg
It's those lines in the clouds. If you can tab between the two images, you can see the difference easily. Imagine seeing those lines appear, every single time you move in a game. (I haven't tested this in movies yet, but I am assuming it's the same).
It isn't very clear on a static image. But when the image moves, the darker areas stay in the same place and it draws your eyes towards them. It isn't terrible, but it is annoying, especially consider how much this screen cost.
Message was edited by: telelove

Calibrating Apple Cinema Display for Video Editing

What's the procedure to calibrate an Apple Cinema Display for editing in FCP (editing and preliminary color grading)?
My camcorder can produce color bars, but I can't hook it up directly to the monitor. Shall I record color bars and use the recorded clip to calibrate? What's the procedure regarding calibration?
Thanks!

The need to "calibrate" a display for video "editing" is a complete fallacy. There is no need to have accurate images when plopping pictures and graphics next to each other to create a story in a linear fashion. For accuracy you need a dedicated input/output device with a display that represents your intended delivery; projection, broadcast, whatever. If your intended delivery is web or phone only, well, it's a total rodeo where the word "consistency" has no meaning at all.
The MXO, it puts a look up table on a computer monitor and then does some other electronic mumbo jumbo to simulate interlacing and other tv junk. I call it lipstick on a pig, others here will give it high marks.
The only real constant is that if you want to play in the world of "hd", the costs are bigger than in "sd" and is the return on investment worth it?
z.

Where can I purchase a Logic Board for a 24" Apple Cinema Display?

My 24" Cinema Display started to flicker and black out shortly after I purchased my most recent MacBook Pro. Apple felt that the issue was the MacBook Pro so they replaced it. The problem continued so they suggested I take the Cinema Display to the Genius Bar. The display was out of warranty and the Apple Genius felt the issue was a bad display even after I told him I smelt silicon burning just before it went out completely. He said that he could "depot" the unit and have it repaired for ~$600. Due to the high cost of repair, I chose to purchase a new Thunderbolt Display instead. Recently, I opened the old Cinema Display and found that the Logic Board is fried. I have ordered a new board from 2 different Web retailers. Both accepted the purchase as "in stock" but then stated they could not get the board from Apple. Where can I purchase the Logic Board for a 24" Apple Cinema Display?
Many thanks!

I was very interested to read this document. I think there is a problem with the Cinema Display and that it is frying the computer.
My husband bought each of us a macbook pro. His was hooked up to the cinema display. After about a year, his MBP started to suffer intermittent failures where it would suddenly shut off and have to be hard rebooted. After 2 years, the power or logic board on his MBP completely failed. He bought a new MBP and a Thunderbolt display, and I inherited his Cinema Display for use with my original MBP.
After one month of use with the cinema display, my MBP started to have the same problems. It has to be hard rebooted almost every time I disconnect or reconnect with the cinema display. I went to the Genius bar, and they confirmed that my MBP logic board needs to be replaced; I'm just holding out until spring break to take it back in, as they say it may take a week. Fortunately, I have AppleCare for my MBP.
Our cinema display is 3-4 years old, but it looks like, even though it appears to be working, I should probably get rid of it. I can't keep frying computers!
I'm posting this because I'm wondering how many others are experiencing this problem.

I have an apple cinema display that hasnt been tested, before i go out n by an adc adapter for it, i wanted to know if the apple store could test it

i have an apple cinema display that hasnt been tested, before i go out n by an adc adapter for it, i wanted to know if the apple store could test it

You should probably call and ask them. We are just other Apple product users here, like yourself.

Do Window Vista Dirvers exist for Apple Cinema Displays ?

I am using a 23 inch Apple Cinema Display with a windows Vista box and noticed it is using a generic HD driver. Should I have a diver specific to the ACD? Do any exist?
Thanks
Power Book Mac OS X (10.4.9) 23 inch ACD

I have one more idea that might help people. This is a theory on my part, so bear with me.
You can extract all of the files from WinACD and use just the INF files get your monitor to display at the proper resolutions. To do so, do an Administrative Install using the following command:
msiexec /a <path to msi file>WinACD-0.4.6.msi
This will extract the files to C:\Program Files\WinACD, but not install the application onto the system. You can then go to:
Settings - Control Panel - Display
Click on Settings and then Advanced
Click on Monitor and then Properties
Click on Update Driver... and find the acdmonitor.inf file in C:\Program Files\WinACD\noarch.
Theoretically that should work. I cannot test the very last step for I have it working correctly already.
I will tinker with this on Vista 64 this weekend and see how to make it work. You should not have to do this with Vista 32. I had to turn of the User Account Control in order to be able to install it. With it on, WinACD says that it could not install because it was interrupted.
Other OS
Other OS

HT2810 apple cinema display sometimes needs to be unplugged and plugged back in multiple times to turn on any ideas for a fix?

apple cinema display will not allays start
i need to plug and unplug multiple times for ti to start.
any thoughts ideas would be helpful thanks

Okay, Mr. Easthills, you have an imac, but yet you mention apple cinema display....Hmmm, curious. you could try zapping the PRAM, hold down command (apple?), Option+P+R keys while rebooting mac. Hold down for 3 chimes, then let go and boot normally. I have this problem too, and I have a 20" widescreen apple cinema display(DVI connector--did I just date myself or what?),anyways, it's behaving itself now okay, but it tended to go dark right in the middle of whatever I was doing, and only unplugging the power cord to the display, and replugging in it would fix it for a while. sometimes it would happen again, and again the same solution. As to why it happens now with Yosemite, I don't know . This dear old monitor has lasted me about 8 years and it's still going just fine.. not state of the art anymore, though...
oh well, good luck to you
John B

Is the 24 inch Apple Cinema Display the best choice for Final Cut Studio 2

I'm about to order a Mac Pro and Final Cut Studio 2 and have a question about monitor choices.
Is the 24 inch Apple Cinema Display the best choice are there non-Apple monitors that will do as good or better job with HD editing and output?

COMPUTER MONITORS bear very little on HD editing and output...especially output. They are just the monitors you use to look at your clips and your timeline. THey work for SD and HD. You really only use them to, well, as I said, see what you are doing. It would be nice to have GOOD ONES so the image looks decent. I use the Dell 24" monitors. The current one is the 2408. Nearly half the price of the Apple 23" displays...and really, the only Apple 23" that exists connects via their new connector, so you need a new MacPro or MacBook pro...or some adapter, to get it to work. And they are not worth the extra money, in my experience.
Samsung monitors are also good.
Shane

New Specs for Apple Cinema Displays ???

I seem to recall that during the WWDC New Specs for Apple Cinema Displays were made public.
What are these new specs ?
Or am I mistaken?<<br>
PowerBook Mac OS X (10.4.7)

Thanks a.brody
The Online Apple Store and the Apple dealers here in Germany either don't seem to be aware of the new specs or they have a lot of the "older" displays (Brightnes: 270 cd/m2 Contrast: 400:1) left in stock which they want or need "to get rid of".
I'm thinking of ordering either a 23" or a 30" for my MacPro, but the new spec cinema displays are not yet available here.

Apple Cinema Display 23" For Power Mac G4 733 Quick Silver

Hi,
I would like to ask if possible to use the 23" Apple Cinema Display to a PowerMac G4 733 (Quick Silver)? If not, any suggestion or what kind of Video card do you suggest that makes Apple Cinema display works on a Legacy Macs.
Thanks,
Val

It will work if you apply the firmware update to the video card.
<http://docs.info.apple.com/article.html?artnum=120168>

Cable extension for 24" Apple Cinema Display

Similar Messages

Maybe you are looking for